From c0591ba639dafdd94ad415660ca9007d1384efac Mon Sep 17 00:00:00 2001 From: handsomeyingyan Date: Sun, 2 May 2021 10:00:18 +0800 Subject: [PATCH 72/78] add msm8916 devices form msm8916-mainline --- arch/arm64/boot/dts/qcom/Makefile | 41 +- .../dts/qcom/apq8016-samsung-gt510wifi.dts | 465 ++++++ .../qcom/apq8016-samsung-matissevewifi.dts | 507 ++++++ arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 14 +- ...q8094-sony-xperia-kitakami-karin_windy.dts | 23 + arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 16 + arch/arm64/boot/dts/qcom/ipq6018.dtsi | 45 +- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 +- .../dts/qcom/msm8916-alcatel-alto5-vdf.dts | 183 +++ .../qcom/msm8916-alcatel-idol347-modem.dts | 42 + .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 560 +++++++ .../boot/dts/qcom/msm8916-asus-z00l-modem.dts | 34 + .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 453 ++++++ .../dts/qcom/msm8916-asus-z010d-modem.dts | 34 + .../boot/dts/qcom/msm8916-asus-z010d.dts | 487 ++++++ arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts | 226 +++ .../boot/dts/qcom/msm8916-lg-m216-modem.dts | 35 + arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts | 406 +++++ .../qcom/msm8916-longcheer-l8150-modem.dts | 34 + .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 413 ++++- .../qcom/msm8916-longcheer-l8910-modem.dts | 34 + .../boot/dts/qcom/msm8916-longcheer-l8910.dts | 560 +++++++ .../qcom/msm8916-motorola-harpia-modem.dts | 34 + .../boot/dts/qcom/msm8916-motorola-harpia.dts | 542 +++++++ .../qcom/msm8916-motorola-osprey-modem.dts | 34 + .../boot/dts/qcom/msm8916-motorola-osprey.dts | 493 ++++++ .../qcom/msm8916-motorola-surnia-modem.dts | 34 + .../boot/dts/qcom/msm8916-motorola-surnia.dts | 417 +++++ .../arm64/boot/dts/qcom/msm8916-oppo-a51f.dts | 537 +++++++ arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 16 + arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi | 7 +- .../qcom/msm8916-samsung-a2015-common.dtsi | 234 ++- .../dts/qcom/msm8916-samsung-a2015-modem.dtsi | 54 + .../qcom/msm8916-samsung-a3u-eur-modem.dts | 3 + .../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 76 + .../qcom/msm8916-samsung-a5u-eur-modem.dts | 3 + .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 26 + .../dts/qcom/msm8916-samsung-gprimeltecan.dts | 180 +++ .../dts/qcom/msm8916-samsung-j3ltespr.dts | 170 ++ .../boot/dts/qcom/msm8916-samsung-j5nlte.dts | 305 ++++ .../qcom/msm8916-wingtech-wt86518-modem.dts | 6 + .../dts/qcom/msm8916-wingtech-wt86518.dts | 92 ++ .../qcom/msm8916-wingtech-wt86528-modem.dts | 3 + .../dts/qcom/msm8916-wingtech-wt86528.dts | 167 ++ .../qcom/msm8916-wingtech-wt865x8-modem.dtsi | 33 + .../dts/qcom/msm8916-wingtech-wt865x8.dtsi | 441 +++++ .../qcom/msm8916-wingtech-wt88047-modem.dts | 45 + .../dts/qcom/msm8916-wingtech-wt88047.dts | 569 +++++++ arch/arm64/boot/dts/qcom/msm8916.dtsi | 178 +- .../dts/qcom/msm8992-bullhead-rev-101.dts | 41 +- .../msm8992-msft-lumia-octagon-talkman.dts | 15 + .../dts/qcom/msm8992-msft-lumia-talkman.dts | 39 - .../boot/dts/qcom/msm8992-xiaomi-libra.dts | 92 +- arch/arm64/boot/dts/qcom/msm8992.dtsi | 623 +------ .../msm8994-msft-lumia-octagon-cityman.dts | 15 + .../dts/qcom/msm8994-msft-lumia-octagon.dtsi | 909 +++++++++++ .../qcom/msm8994-sony-xperia-kitakami-ivy.dts | 26 + .../msm8994-sony-xperia-kitakami-karin.dts | 45 + .../msm8994-sony-xperia-kitakami-satsuki.dts | 18 + .../msm8994-sony-xperia-kitakami-sumire.dts | 4 +- .../msm8994-sony-xperia-kitakami-suzuran.dts | 20 + .../qcom/msm8994-sony-xperia-kitakami.dtsi | 457 ++++-- arch/arm64/boot/dts/qcom/msm8994.dtsi | 413 ++++- arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +- .../boot/dts/qcom/msm8998-clamshell.dtsi | 16 + arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 10 + arch/arm64/boot/dts/qcom/msm8998-pins.dtsi | 108 -- arch/arm64/boot/dts/qcom/msm8998.dtsi | 395 ++++- arch/arm64/boot/dts/qcom/pm6150.dtsi | 10 + arch/arm64/boot/dts/qcom/pm6150l.dtsi | 24 + arch/arm64/boot/dts/qcom/pm8150.dtsi | 14 +- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 12 +- arch/arm64/boot/dts/qcom/pm8150l.dtsi | 12 +- arch/arm64/boot/dts/qcom/pm8994.dtsi | 98 +- arch/arm64/boot/dts/qcom/pm8998.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmi8998.dtsi | 8 +- arch/arm64/boot/dts/qcom/pms405.dtsi | 2 +- arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 +- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 663 +++++++- arch/arm64/boot/dts/qcom/sc7180-lite.dtsi | 18 + .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 11 + .../dts/qcom/sc7180-trogdor-lazor-r1-kb.dts | 4 +- .../dts/qcom/sc7180-trogdor-lazor-r1-lte.dts | 12 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 15 +- .../dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 17 + .../dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 26 + .../boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 15 + .../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 7 +- .../boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi | 4 + .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 16 +- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 197 ++- arch/arm64/boot/dts/qcom/sc7180.dtsi | 327 +++- arch/arm64/boot/dts/qcom/sdm630.dtsi | 16 +- arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 11 + .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 623 +++++++ .../dts/qcom/sdm845-oneplus-enchilada.dts | 19 + .../boot/dts/qcom/sdm845-oneplus-fajita.dts | 23 + arch/arm64/boot/dts/qcom/sdm845.dtsi | 206 ++- .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 146 +- arch/arm64/boot/dts/qcom/sdm850.dtsi | 21 + arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 463 ++++++ arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 17 + arch/arm64/boot/dts/qcom/sm8150.dtsi | 959 +++++++++++ arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 ++++++ arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 273 ++++ arch/arm64/boot/dts/qcom/sm8250.dtsi | 1429 ++++++++++++++++- arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 250 +++ arch/arm64/boot/dts/qcom/sm8350.dtsi | 499 ++++++ 108 files changed, 18226 insertions(+), 1268 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/apq8016-samsung-gt510wifi.dts create mode 100644 arch/arm64/boot/dts/qcom/apq8016-samsung-matissevewifi.dts create mode 100644 arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-alcatel-alto5-vdf.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-asus-z00l-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-asus-z010d-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-asus-z010d.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-lg-m216-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-motorola-harpia-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-motorola-osprey-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-motorola-surnia-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-oppo-a51f.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-modem.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-j3ltespr.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-j5nlte.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8-modem.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047-modem.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts delete mode 100644 arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts delete mode 100644 arch/arm64/boot/dts/qcom/msm8998-pins.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-lite.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm850.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8350-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index fb4631f89..e4b45c018 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,18 +1,43 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_QCOM) += apq8016-samsung-gt510wifi.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8016-samsung-matissevewifi.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-alto5-vdf.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb msm8916-alcatel-idol347-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb msm8916-asus-z00l-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z010d.dtb msm8916-asus-z010d-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-lg-c50.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-lg-m216.dtb msm8916-lg-m216-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb msm8916-longcheer-l8150-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb msm8916-longcheer-l8910-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-harpia.dtb msm8916-motorola-harpia-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-osprey.dtb msm8916-motorola-osprey-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-surnia.dtb msm8916-motorola-surnia-modem.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-oppo-a51f.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb msm8916-samsung-a3u-eur-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb msm8916-samsung-a5u-eur-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gprimeltecan.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j3ltespr.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5nlte.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86518.dtb msm8916-wingtech-wt86518-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86528.dtb msm8916-wingtech-wt86528-modem.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb msm8916-wingtech-wt88047-modem.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-talkman.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-octagon-cityman.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-ivy.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-karin.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb @@ -26,6 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-kb.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb @@ -39,7 +67,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-samsung-gt510wifi.dts b/arch/arm64/boot/dts/qcom/apq8016-samsung-gt510wifi.dts new file mode 100644 index 000000000..7982317fe --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-samsung-gt510wifi.dts @@ -0,0 +1,465 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include +#include + +/ { + model = "Samsung Galaxy Tab A 9.7 WiFi (2015) (SM-T550)"; + compatible = "samsung,gt510wifi", "qcom,apq8016"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + speaker_codec: audio-codec { + compatible = "maxim,max98357a"; + sdmode-gpios = <&msmgpio 55 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + + reg_lcd_vmipi: regulator-lcd-vmipi { + compatible = "regulator-fixed"; + regulator-name = "lcd_vmipi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_en_default>; + }; + + reg_vlcd_5p4v: regulator-vlcd-5p4v { + compatible = "regulator-fixed"; + regulator-name = "vlcd_5p4v"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + + gpio = <&msmgpio 51 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&buckbooster_en_default>; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default>; + }; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + // FIXME: Use extcon device provided by MUIC driver when available + usb_vbus: usb-vbus { + compatible = "linux,extcon-usb-gpio"; + vbus-gpio = <&msmgpio 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_tsp_1p8v>; + vdda-supply = <®_tsp_3p3v>; + + reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_int_rst_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + compatible = "samsung,s6d7aa0-ltl101at01"; + reg = <0>; + + vmipi-supply = <®_lcd_vmipi>; + 5p4v-supply = <®_vlcd_5p4v>; + reset-gpios = <&msmgpio 97 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&lpass { + status = "okay"; + + dai@3 { + reg = ; + qcom,playback-sd-lines = <1>; + }; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3660b"; + }; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus>; + + model = "samsung-gt510"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + + dai-link-quaternary { + link-name = "Quaternary MI2S"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&usb_vbus>; +}; + +&usb_hs_phy { + extcon = <&usb_vbus>; +}; + +&wcd_codec { + jack-gpios = <&msmgpio 110 GPIO_ACTIVE_LOW>; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vtreshold-low = <75 150 237 450 500>; + qcom,mbhc-vtreshold-high = <75 150 237 450 500>; + + pinctrl-names = "default"; + pinctrl-0 = <&jack_default>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + buckbooster_en_default: buckbooster-en-default { + pins = "gpio51"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default { + pins = "gpio52"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + jack_default: jack-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + lcd_en_default: lcd-en-default { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + tsp_en_default: tsp-en-default { + pins = "gpio73"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default: tsp-int-rst-default { + pins = "gpio13", "gpio114"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-samsung-matissevewifi.dts b/arch/arm64/boot/dts/qcom/apq8016-samsung-matissevewifi.dts new file mode 100644 index 000000000..b3cda3898 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-samsung-matissevewifi.dts @@ -0,0 +1,507 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include +#include + +/ { + model = "Samsung Galaxy Tab 4 10.1 WiFi (2015) (SM-T533)"; + compatible = "samsung,matissevewifi", "qcom,apq8016"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + speaker_codec: audio-codec { + compatible = "maxim,max98357a"; + sdmode-gpios = <&msmgpio 100 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* FIXME: find why we have to force regulator on */ + regulator-always-on; + regulator-boot-on; + + gpio = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_en_default>; + }; + + reg_lvds: regulator-lvds { + compatible = "regulator-fixed"; + regulator-name = "lvds"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* FIXME: see above */ + regulator-always-on; + regulator-boot-on; + + gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lvds_en_default>; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default>; + }; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 98 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en1_default>; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + muic: extcon@25 { + compatible = "siliconmitus,sm5502-muic"; + + reg = <0x25>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis2hh12"; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + reg = <0x1d>; + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + + st,drdy-int-pin = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_tsp_1p8v>; + vdda-supply = <®_tsp_3p3v>; + + reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_int_rst_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + compatible = "samsung,tc358764-ltl101al06"; + reg = <0>; + + lcd-supply = <®_lcd>; + lvds-supply = <®_lvds>; + reset-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>; + + clocks = <&gcc GCC_GP3_CLK>; + clock-names = "pwm"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&lpass { + status = "okay"; + + dai@3 { + reg = ; + qcom,playback-sd-lines = <1>; + }; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3660b"; + }; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus>; + + model = "samsung-gt510"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + + dai-link-quaternary { + link-name = "Quaternary MI2S"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&muic>, <&muic>; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&wcd_codec { + jack-gpios = <&msmgpio 110 GPIO_ACTIVE_LOW>; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vtreshold-low = <75 150 237 450 500>; + qcom,mbhc-vtreshold-high = <75 150 237 450 500>; + + pinctrl-names = "default"; + pinctrl-0 = <&jack_default>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + jack_default: jack-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + lcd_en_default: lcd-en-default { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + lvds_en_default: lvds-en-default { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + muic_int_default: muic-int-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default: tsp-en-default { + pins = "gpio73"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_en1_default: tsp-en1-default { + pins = "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default: tsp-int-rst-default { + pins = "gpio13", "gpio114"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 3c7f97539..6aef0c2e4 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -301,6 +301,10 @@ &lpass { status = "okay"; }; +&mdss { + status = "okay"; +}; + &pm8916_resin { status = "okay"; linux,code = ; @@ -417,11 +421,6 @@ &smd_rpm_regulators { vdd_l4_l5_l6-supply = <&pm8916_s4>; vdd_l7-supply = <&pm8916_s4>; - s1 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1562000>; - }; - s3 { regulator-min-microvolt = <375000>; regulator-max-microvolt = <1562000>; @@ -445,11 +444,6 @@ l2 { regulator-max-microvolt = <1200000>; }; - l3 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; - }; - l4 { regulator-min-microvolt = <1750000>; regulator-max-microvolt = <3337000>; diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts new file mode 100644 index 000000000..a8dffc8c6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +/* As the names may imply, there is quite a bunch of duplication there. */ +#include "msm8994-sony-xperia-kitakami-karin.dts" + +/ { + model = "Sony Xperia Z4 Tablet (Wi-Fi)"; + compatible = "sony,karin_windy", "qcom,apq8094"; + + /* + * This model uses the APQ variant of MSM8994 (APQ8094). + * The v1/v2/v2.1 story (from kitakami.dtsi) also applies here. + */ + qcom,msm-id = <253 0x20000>, <253 0x20001>; +}; + +/delete-node/ &pm8994_l1; +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index e8eaa958c..99cefe88f 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -62,3 +62,19 @@ spi_0_pins: spi-0-pins { bias-pull-down; }; }; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index cdc1e3d60..9fa5b028e 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -192,7 +192,7 @@ prng: qrng@e1000 { clock-names = "core"; }; - cryptobam: dma@704000 { + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x00704000 0x0 0x20000>; interrupts = ; @@ -231,6 +231,17 @@ serial_3_pins: serial3-pinmux { drive-strength = <8>; bias-pull-down; }; + + qpic_pins: qpic-pins { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6", "gpio7", + "gpio8", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", + "gpio15", "gpio17"; + function = "qpic_pad"; + drive-strength = <8>; + bias-disable; + }; }; gcc: gcc@1800000 { @@ -252,7 +263,7 @@ tcsr_q6: syscon@1945000 { reg = <0x0 0x01945000 0x0 0xe000>; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07884000 0x0 0x2b000>; interrupts = ; @@ -332,6 +343,36 @@ i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */ status = "disabled"; }; + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x07984000 0x0 0x1a000>; + interrupts = ; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "iface_clk", "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: nand@79b0000 { + compatible = "qcom,ipq6018-nand"; + reg = <0x0 0x079b0000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + pinctrl-0 = <&qpic_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 829e37ac8..a32e5e79a 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -276,7 +276,7 @@ sdhc_1: sdhci@7824900 { status = "disabled"; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x2b000>; interrupts = ; @@ -372,7 +372,7 @@ blsp1_i2c3: i2c@78b7000 { status = "disabled"; }; - qpic_bam: dma@7984000 { + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07984000 0x1a000>; interrupts = ; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-alto5-vdf.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-alto5-vdf.dts new file mode 100644 index 000000000..579eaab68 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-alto5-vdf.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include + +/ { + model = "Vodafone Smart prime 6 (alto5-vdf)"; + compatible = "alcatel,alto5-vdf", "qcom,msm8916"; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + // Hack for initial USB bringup + usb_vbus: extcon-usb-dummy { + compatible = "linux,extcon-usb-dummy"; + }; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>; +}; + +&usb { + status = "okay"; + extcon = <&usb_vbus>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&usb_vbus>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; +}; + diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347-modem.dts new file mode 100644 index 000000000..6e85eb96b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347-modem.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-alcatel-idol347.dts" +#include "msm8916-modem.dtsi" + +&q6afedai { + dai@22 { + reg = ; + qcom,sd-lines = <0>; + }; +}; + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + /delete-node/ dai-link-quaternary; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + + dai-link-quaternary-qdsp6 { + link-name = "Quaternary MI2S"; + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts new file mode 100644 index 000000000..797103921 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -0,0 +1,560 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include +#include + +/ { + model = "Alcatel OneTouch Idol 3 (4.7)"; + compatible = "alcatel,idol347", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /delete-node/ rmtfs@86700000; + /delete-node/ reserved@86680000; + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + rmtfs: rmtfs@86680000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86680000 0x0 0x160000>; + no-map; + + qcom,client-id = <1>; + }; + + mpss_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x5000000>; + no-map; + }; + + gps_mem: gps@8b800000 { + status = "disabled"; + reg = <0x0 0x8b800000 0x0 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8ba00000 { + reg = <0x0 0x8ba00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c000000 { + reg = <0x0 0x8c000000 0x0 0x600000>; + no-map; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <64>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp_i2c3 { + status = "okay"; + + speaker_codec_top: audio-codec@34 { + compatible = "nxp,tfa9897"; + reg = <0x34>; + vddd-supply = <&pm8916_l6>; + rcv-gpios = <&msmgpio 50 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&speaker_top_default>; + sound-name-prefix = "Speaker Top"; + #sound-dai-cells = <0>; + }; + + speaker_codec_bottom: audio-codec@36 { + compatible = "nxp,tfa9897"; + reg = <0x36>; + vddd-supply = <&pm8916_l6>; + rcv-gpios = <&msmgpio 111 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&speaker_bottom_default>; + sound-name-prefix = "Speaker Bottom"; + #sound-dai-cells = <0>; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + touchscreen@26 { + compatible = "mstar,msg2638"; + reg = <0x26>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_reset_default>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + touchscreen-size-x = <2048>; + touchscreen-size-y = <2048>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + accelerometer@f { + compatible = "kionix,kxtj21009"; + reg = <0x0f>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&msmgpio>; + interrupts = <31 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + }; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + pinctrl-names = "default"; + pinctrl-0 = <&tps65132_en_default>; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + enable-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + }; + + proximity@48 { + compatible = "sensortek,stk3310"; + reg = <0x48>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&proximity_int_default>; + }; + + gyroscope@68 { + compatible = "bosch,bmg160"; + reg = <0x68>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&msmgpio>; + interrupts = <97 IRQ_TYPE_EDGE_RISING>, + <98 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_int_default>; + }; +}; + +&dsi0 { + panel@0 { + compatible = "alcatel,idol347-panel"; + reg = <0>; + + backlight = <&backlight>; + + vsp-supply = <®_lcd_pos>; + vsn-supply = <®_lcd_neg>; + + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_pwm { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_out>; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus>; + + model = "alcatel-idol3"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + /* unused primary link is kept so we can use same UCM with modem */ + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + + dai-link-quaternary { + link-name = "Quaternary MI2S"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + qcom,micbias1-ext-cap; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gyro_int_default: gyro-int-default { + pins = "gpio97", "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_active: mdss-active { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_suspend: mdss-suspend { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + proximity_int_default: proximity-int-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <6>; + bias-pull-up; + }; + + speaker_bottom_default: speaker-bottom-default { + pins = "gpio111"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + speaker_top_default: speaker-top-default { + pins = "gpio50"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tps65132_en_default: tps65132-en-default { + pins = "gpio2", "gpio33"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ts_int_reset_default: ts-int-reset-default { + pins = "gpio13", "gpio100"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio69"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; + +&pm8916_mpps { + pwm_out: mpp4 { + pins = "mpp4"; + function = "digital"; + + output-low; + qcom,dtest = <1>; + power-source = ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l-modem.dts new file mode 100644 index 000000000..e965e26db --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l-modem.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-asus-z00l.dts" +#include "msm8916-modem.dtsi" + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts new file mode 100644 index 000000000..643e5468b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -0,0 +1,453 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include +#include + +/ { + model = "Asus Zenfone 2 Laser"; + compatible = "asus,z00l", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + mpss_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + gps_mem: gps@8bd00000 { + status = "disabled"; + reg = <0x0 0x8bd00000 0x0 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8bf00000 { + reg = <0x0 0x8bf00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c500000 { + reg = <0x0 0x8c500000 0x0 0x600000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_vmmc_en_default>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l8>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + imu@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <36 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l11>; + // TODO: iovcc-supply <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + compatible = "asus,z00l-panel"; + reg = <0>; + + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + backlight-gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + power-supply = <&pm8916_l8>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_bl_en_default>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + vmmc-supply = <®_sd_vmmc>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,micbias1-ext-cap; + qcom,hphl-jack-type-normally-open; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio117"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + imu_default: imu-default { + pins = "gpio36"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + lcd_bl_en_default: lcd-bl-en-default { + pins = "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio112"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + sd_vmmc_en_default: sd-vmmc-en-default { + pins = "gpio87"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + reset { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z010d-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z010d-modem.dts new file mode 100644 index 000000000..c0e783b3e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z010d-modem.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-asus-z010d.dts" +#include "msm8916-modem.dtsi" + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z010d.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z010d.dts new file mode 100644 index 000000000..cf881fd46 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z010d.dts @@ -0,0 +1,487 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include +#include + +/ { + model = "Asus Zenfone Max ZC550KL"; + compatible = "asus,z010d", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + mpss_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + gps_mem: gps@8bd00000 { + status = "disabled"; + reg = <0x0 0x8bd00000 0x0 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8bf00000 { + reg = <0x0 0x8bf00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c500000 { + reg = <0x0 0x8c500000 0x0 0x600000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 115 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + + speaker_amp: audio-amplifier { + compatible = "awinic,aw8738"; + + pinctrl-names = "default"; + pinctrl-0 = <&spk_ext_pa_default>; + + enable-gpios = <&msmgpio 112 GPIO_ACTIVE_HIGH>; + aw8738,mode = <2>; + sound-name-prefix = "Speaker Amp"; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@e { + compatible = "kionix,kxtj21009"; + reg = <0x0e>; + + interrupt-parent = <&msmgpio>; + interrupts = <114 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + }; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8916_l17>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + + led@1 { + reg = <1>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + /* Actually ft5x46 */ + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pm8916_l17>; + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + compatible = "asus,z010d-r69339"; + reg = <0>; + + power-supply = <&pm8916_l17>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + model = "bq-paella"; + audio-routing = + "Speaker Amp IN", "HPH_R_EXT", + "AMIC1", "MIC BIAS Internal1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS Internal3"; + aux-devs = <&speaker_amp>; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio114"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio36"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable = <0>; + }; + mdss_sleep: mdss-sleep { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + spk_ext_pa_default: spk-ext-pa-default { + pins = "gpio112"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + reset { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts new file mode 100644 index 000000000..303226879 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include + +/ { + model = "LG Leon LTE"; + compatible = "lg,c50", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 108 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + volume-down { + label = "Volume Down"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + usb_vbus: extcon-usb-dummy { + compatible = "linux,extcon-usb-dummy"; + }; + + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <5000>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_vmmc_en_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <®_sd_vmmc>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>; +}; + +&usb { + status = "okay"; + extcon = <&usb_vbus>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&usb_vbus>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio108"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + sd_vmmc_en_default: sd-vmmc-en-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_cd_on { + /delete-property/ bias-pull-up; + bias-pull-down; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-m216-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-m216-modem.dts new file mode 100644 index 000000000..f540fb6a2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-lg-m216-modem.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-lg-m216.dts" +#include "msm8916-modem.dtsi" + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts new file mode 100644 index 000000000..581672810 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts @@ -0,0 +1,406 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include + +/ { + model = "LG K10 (K420n)"; + compatible = "lg,m216", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + mpss_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x4a00000>; + no-map; + }; + + gps_mem: gps@8b200000 { + status = "disabled"; + reg = <0x0 0x8b200000 0x0 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8b400000 { + reg = <0x0 0x8b400000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8ba00000 { + reg = <0x0 0x8ba00000 0x0 0x600000>; + no-map; + }; + }; + + bat: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3300000>; + voltage-max-design-microvolt = <4350000>; + energy-full-design-microwatt-hours = <8800000>; + charge-full-design-microamp-hours = <2300000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>, + <4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>, + <3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>, + <3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>, + <3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>, + <3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>, + <3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>, + <3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + volume-down { + label = "Volume Down"; + gpios = <&msmgpio 108 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@11 { + compatible = "bosch,bmc150_accel"; + reg = <0x11>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + }; + + magnetometer@13 { + compatible = "bosch,bmc150_magn"; + reg = <0x13>; + + interrupt-parent = <&msmgpio>; + interrupts = <69 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&magn_int_default>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@34 { + compatible = "melfas,mip4_ts"; + reg = <0x34>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + ce-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + panel@0 { + compatible = "lg,m2db7400-incell-simple"; + reg = <0>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_bms { + status = "okay"; + + monitored-battery = <&bat>; + power-supplies = <&pm8916_charger>; +}; + +&pm8916_charger { + status = "okay"; + + qcom,vdd-safe = <4300000>; + qcom,ibat-safe = <700000>; + + monitored-battery = <&bat>; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&pm8916_charger>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&pm8916_charger>; +}; + +&wcd_codec { + qcom,micbias1-ext-cap; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio108"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + magn_int_default: magn-int-default { + pins = "gpio69"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + ce { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150-modem.dts new file mode 100644 index 000000000..9cbb244af --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150-modem.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-longcheer-l8150.dts" +#include "msm8916-modem.dtsi" + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index b9d3c5d98..ae37cb593 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -3,8 +3,13 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" #include #include +#include +#include +#include +#include / { model = "Longcheer L8150"; @@ -18,22 +23,93 @@ chosen { stdout-path = "serial0"; }; + /* + * For some reason, the wcnss firmware is not reloctable, + * so it must be loaded at 0x8b600000. Unfortunately this overlaps + * with the memory region required for the modem (0x86800000-0x8b800000). + * + * On the downstream kernel everything somehow worked even with that + * overlap (possibly because wcnss was loaded after the modem and the + * modem never accessed its last 2 MB memory). Weird. + * + * Fortunately at least the modem is relocatable (aligned to 0x400000), + * so we put it after everything else and leave its original region empty. + */ reserved-memory { - // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 + /delete-node/ mpss@86800000; /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; wcnss_mem: wcnss@8b600000 { reg = <0x0 0x8b600000 0x0 0x600000>; no-map; }; + + venus_mem: venus@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x600000>; + no-map; + }; + + mpss_mem: mpss@8ec00000 { + status = "disabled"; + reg = <0x0 0x8ec00000 0x0 0x5000000>; + no-map; + }; + + gps_mem: gps@93c00000 { + status = "disabled"; + reg = <0x0 0x93c00000 0x0 0x200000>; + no-map; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; }; // FIXME: Use extcon device provided by charger driver when available - usb_vbus: usb-vbus { + usb_otg_hack: usb-otg-hack { compatible = "linux,extcon-usb-gpio"; - vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>; + + /* + * NOTE: This allows detection of custom-made OTG adapters + * + * Since L8150 doesn't support OTG it's impossible to use normal OTG + * adapters. However since USB_ID is in fact connected to GPIO it's + * possible to detect custom-made OTG adapters that connect USB_ID + * to 5v instead of GND and provie external power. + * + * Downside of this approach is that USB_ID pin is used to change boot + * order of SoC and if device will be powered on with adapter attached + * and powered, it will boot into USB BOOT mode. + */ + id-gpio = <&msmgpio 37 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&usb_vbus_default>; + pinctrl-0 = <&usb_id_default>; + }; + + bat: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4350000>; + energy-full-design-microwatt-hours = <9500000>; + charge-full-design-microamp-hours = <2500000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = <4330000 100>, <4265000 95>, + <4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>, + <4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>, + <3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>, + <3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>, + <3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>, + <3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>, + <3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>, + <3000000 0>; }; gpio-keys { @@ -50,17 +126,224 @@ volume-up { linux,code = ; }; }; + + reg_ctp: regulator-ctp { + compatible = "regulator-fixed"; + regulator-name = "ctp"; + + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&ctp_pwr_en_default>; + }; + + flash-led-controller { + compatible = "sgmicro,sgm3140"; + flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; + enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_default>; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = ; + flash-max-timeout-us = <250000>; + }; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8916_l17>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + + led@1 { + reg = <1>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + + led@2 { + reg = <2>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + light-sensor@23 { + compatible = "liteon,ltr559"; + reg = <0x23>; + vdd-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_FALLING>; + }; + + accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; + + gyroscope@68 { + compatible = "bosch,bmg160"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&gyro_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + rmi4@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_ctp>; + vio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_default>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; // Allow sleeping + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; // Touchscreen + }; + }; }; &blsp1_uart2 { status = "okay"; }; +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + compatible = "longcheer,l8150-panel"; + reg = <0>; + + backlight = <&backlight>; + power-supply = <&pm8916_l17>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_bms { + status = "okay"; + + monitored-battery = <&bat>; + power-supplies = <&pm8916_charger>; +}; + +&pm8916_charger { + status = "okay"; + + qcom,vdd-safe = <4300000>; + qcom,ibat-safe = <900000>; + + monitored-battery = <&bat>; +}; + +&pm8916_pwm { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_out>; +}; + &pm8916_resin { status = "okay"; linux,code = ; }; +&pm8916_vib { + status = "okay"; +}; + &pronto { status = "okay"; }; @@ -83,14 +366,53 @@ &sdhc_2 { non-removable; }; +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS Internal1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS Internal3"; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + &usb { status = "okay"; - dr_mode = "peripheral"; - extcon = <&usb_vbus>; + extcon = <&pm8916_charger>, <&usb_otg_hack>; }; &usb_hs_phy { - extcon = <&usb_vbus>; + extcon = <&pm8916_charger>; +}; + +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; &smd_rpm_regulators { @@ -98,11 +420,6 @@ &smd_rpm_regulators { vdd_l4_l5_l6-supply = <&pm8916_s4>; vdd_l7-supply = <&pm8916_s4>; - s1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1300000>; - }; - s3 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1300000>; @@ -123,11 +440,6 @@ l2 { regulator-max-microvolt = <1200000>; }; - l3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1287500>; - }; - l4 { regulator-min-microvolt = <2050000>; regulator-max-microvolt = <2050000>; @@ -207,6 +519,22 @@ l18 { }; &msmgpio { + camera_flash_default: camera-flash-default { + pins = "gpio31", "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ctp_pwr_en_default: ctp-pwr-en-default { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default { pins = "gpio107"; function = "gpio"; @@ -215,10 +543,55 @@ gpio_keys_default: gpio-keys-default { bias-pull-up; }; - usb_vbus_default: usb-vbus-default { - pins = "gpio62"; + gyro_int_default: gyro-int-default { + pins = "gpio23"; function = "gpio"; - bias-pull-up; + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + tp_int_default: tp-int-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio37"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; +}; + +&pm8916_mpps { + pwm_out: mpp4 { + pins = "mpp4"; + function = "digital"; + + output-low; + qcom,dtest = <1>; + power-source = ; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910-modem.dts new file mode 100644 index 000000000..3e3592157 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910-modem.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-longcheer-l8910.dts" +#include "msm8916-modem.dtsi" + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts new file mode 100644 index 000000000..f3c37c284 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -0,0 +1,560 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include +#include +#include + +/ { + model = "BQ Aquaris X5 (Longcheer L8910)"; + compatible = "longcheer,l8910", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + mpss_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x5000000>; + no-map; + }; + + gps_mem: gps@8b800000 { + status = "disabled"; + reg = <0x0 0x8b800000 0x0 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8ba00000 { + reg = <0x0 0x8ba00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c000000 { + reg = <0x0 0x8c000000 0x0 0x600000>; + no-map; + }; + }; + + speaker_amp: audio-amplifier { + compatible = "awinic,aw8738"; + + pinctrl-names = "default"; + pinctrl-0 = <&spk_ext_pa_default>; + + enable-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>; + aw8738,mode = <5>; + sound-name-prefix = "Speaker Amp"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + color = ; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + + pinctrl-names = "default"; + pinctrl-0 = <&button_backlight_default>; + }; + }; + + reg_ts_vcca: regulator-vcca-ts { + compatible = "regulator-fixed"; + regulator-name = "regulator-vcca-ts"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_vcca_default>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default &usb_id_switch_default>; + }; +}; + +&blsp_i2c3 { + status = "okay"; + + magnetometer@d { + compatible = "asahi-kasei,ak09911"; + reg = <0x0d>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + imu@68 { + compatible = "bosch,bmi160"; + reg = <0x68>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + charger: battery@14 { + compatible = "qcom,smb1360"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <62 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&smb_int_default>; + + /* + * Some properties are battery-specific. Battery detection + * happens in the bootloader, so it will fill those appropriately + * and set status = "okay". + */ + status = "disabled"; + + qcom,rsense-10mohm; + + qcom,float-voltage-mv = <4400>; + qcom,iterm-ma = <100>; + qcom,charging-timeout = <192>; /* 768 in downstream */ + qcom,recharge-thresh-mv = <50>; + qcom,chg-inhibit-disabled; + + qcom,battery-profile = <(-1)>; /* Set by bootloader */ + qcom,fg-batt-capacity-mah = <2810>; + qcom,fg-cc-soc-coeff = <0x81D5>; + qcom,fg-cutoff-voltage-mv = <3400>; + qcom,fg-iterm-ma = <100>; + qcom,fg-ibatt-standby-ma = <200>; + qcom,fg-cc-to-cv-mv = <4397>; + qcom,thermistor-c1-coeff = <0x86C2>; + qcom,fg-auto-recharge-soc = <95>; /* 97 in downstream */ + + qcom,otp-hard-jeita-config; + qcom,otp-hot-bat-decidegc = <500>; + qcom,otp-cold-bat-decidegc = <(-50)>; + + qcom,shdn-after-pwroff; + qcom,fg-reset-at-pon; + qcom,fg-reset-threshold-mv = <200>; + + usb_otg_vbus: usb-otg-vbus { + regulator-max-microamp = <1500000>; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@48 { + compatible = "himax,852x"; + reg = <0x48>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + reset-gpio = <&msmgpio 12 GPIO_ACTIVE_HIGH>; + + vcca-supply = <®_ts_vcca>; + vccd-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_reset_default>; + + linux,keycodes = ; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_active>; + pinctrl-1 = <&mdss_suspend>; + + panel@0 { + compatible = "longcheer,l8910-panel"; + reg = <0>; + + backlight = <&backlight>; + power-supply = <&pm8916_l17>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_pwm { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_out>; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + model = "bq-paella"; + audio-routing = + "Speaker Amp IN", "HPH_R_EXT", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + aux-devs = <&speaker_amp>; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; +}; + +&usb_hs_phy { + extcon = <&charger>; +}; + +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + button_backlight_default: button-backlight-default { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio111"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_active: mdss-active { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_suspend: mdss-suspend { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + smb_int_default: smb_int_default { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + spk_ext_pa_default: spk-ext-pa-default { + pins = "gpio114"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ts_int_reset_default: ts-int-reset-default { + pins = "gpio12", "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ts_vcca_default: ts-vcca-default { + pins = "gpio78"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; + + usb_id_switch_default: usb_id_switch_default { + function = "gpio"; + pins = "gpio121"; + + drive-strength = <2>; + output-high; + }; +}; + +&pm8916_mpps { + pwm_out: mpp4 { + pins = "mpp4"; + function = "digital"; + + output-low; + qcom,dtest = <1>; + power-source = ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia-modem.dts new file mode 100644 index 000000000..ab69431e4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia-modem.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-motorola-harpia.dts" +#include "msm8916-modem.dtsi" + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts new file mode 100644 index 000000000..e4d86b486 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include +#include + +/ { + model = "Motorola Moto G4 Play (harpia)"; + compatible = "motorola,harpia", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + mpss_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + gps_mem: gps@8bd00000 { + status = "disabled"; + reg = <0x0 0x8bd00000 0x0 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8bf00000 { + reg = <0x0 0x8bf00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c500000 { + reg = <0x0 0x8c500000 0x0 0x600000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 91 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_id_default>; + pinctrl-1 = <&usb_id_sleep>; + }; + + /* + * harpia uses a NT50358 regulator to drive the display panel. + * This regulator is apparently compatible with the TPS65132, except for + * some differences with the enable lines, according to the downstream + * kernel. + * (https://github.com/MotorolaMobilityLLC/kernel-msm/blob/nougat-7.1.1-release-harpia/arch/arm/boot/dts/qcom/msm8916-harpia.dtsi#L202) + * TODO: figure out what needs to be done to get a proper driver working + * for this regulator. For now, we can just use fixed-regulator, as the + * regulator reads voltages on startup from an onboard EEPROM, and we + * don't need to adjust the regulator's values. + */ + nt50358_pos: nt50358-pos { + compatible = "regulator-fixed"; + regulator-name = "nt50358-pos"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_p_en_default>; + }; + + nt50358_neg: nt50358-neg { + compatible = "regulator-fixed"; + regulator-name = "nt50358-neg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&msmgpio 98 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_n_en_default>; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + battery@36 { + compatible = "maxim,max17050"; + reg = <0x36>; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,cold-temp = <(-200)>; + maxim,dead-volt = <3200>; + maxim,over-volt = <4500>; + + interrupt-parent = <&msmgpio>; + interrupts = <62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&battery_alert_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + rmi4@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l16>; + vio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default>; + + syna,startup-delay-ms = <100>; + + rmi4-f01@1 { + reg = <1>; + syna,nosleep-mode = <1>; // Allow sleeping + }; + + rmi4-f11@11 { + reg = <11>; + syna,sensor-type = <1>; // Touchscreen + }; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + accelerometer@19 { + compatible = "bosch,bma253"; + reg = <0x19>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>, <119 IRQ_TYPE_EDGE_RISING>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + }; +}; + +&blsp1_uart1 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + compatible = "motorola,harpia-panel"; + reg = <0>; + + vsp-supply = <&nt50358_pos>; + vsn-supply = <&nt50358_neg>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + backlight-gpios = <&msmgpio 37 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_bl_en_default>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd>; + + cd-gpios = <&msmgpio 118 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act &headset_switch_supply_en + &headset_switch_in>; + pinctrl-1 = <&cdc_pdm_lines_sus &headset_switch_supply_en + &headset_switch_in>; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,micbias1-ext-cap; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +/* CTS/RTX are not used */ +&blsp1_uart1_default { + pins = "gpio0", "gpio1"; +}; +&blsp1_uart1_sleep { + pins = "gpio0", "gpio1"; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio115", "gpio119"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + battery_alert_default: battery-alert-default { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + headset_switch_in: headset-switch-in { + pins = "gpio112"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-low; + }; + + headset_switch_supply_en: headset-switch-supply-en { + pins = "gpio111"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-high; + }; + + lcd_bl_en_default: lcd-bl-en-default { + pins = "gpio37"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + lcd_p_en_default: lcd-p-en-default { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + lcd_n_en_default: lcd-n-en-default { + pins = "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + sdc2_cd: sdc2-cd-default { + pins = "gpio118"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb-id { + usb_id_default: id-default { + pins = "gpio91"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; + usb_id_sleep: id-sleep { + pins = "gpio91"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey-modem.dts new file mode 100644 index 000000000..d0128ff22 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey-modem.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-motorola-osprey.dts" +#include "msm8916-modem.dtsi" + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts new file mode 100644 index 000000000..531be15c5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts @@ -0,0 +1,493 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include +#include +#include + +/ { + model = "Motorola Moto G 2015 (osprey)"; + compatible = "motorola,osprey", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + mpss_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + gps_mem: gps@8bd00000 { + status = "disabled"; + reg = <0x0 0x8bd00000 0x0 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8bf00000 { + reg = <0x0 0x8bf00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c500000 { + reg = <0x0 0x8c500000 0x0 0x600000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 91 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_id_default>; + pinctrl-1 = <&usb_id_sleep>; + }; + + reg_panel_vddio: regulator-panel-vddio { + compatible = "regulator-fixed"; + regulator-name = "vddio_panel"; + gpio = <&msmgpio 36 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&panel_vddio_default>; + startup-delay-us = <300>; + regulator-boot-on; + }; + + reg_touch_vdda: regulator-touch-vdda { + compatible = "regulator-fixed"; + regulator-name = "touch_vdda"; + gpio = <&msmgpio 114 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&touch_vdda_default>; + startup-delay-us = <300>; + vin-supply = <&pm8916_l16>; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + battery@36 { + compatible = "maxim,max17050"; + reg = <0x36>; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,cold-temp = <(-200)>; + maxim,dead-volt = <3200>; + maxim,over-volt = <4500>; + + interrupt-parent = <&msmgpio>; + interrupts = <49 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&battery_alert_default>; + }; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + + pinctrl-names = "default"; + pinctrl-0 = <&disp_en_default>; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + enable-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + enable-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + rmi4@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_touch_vdda>; + vio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_int_default>; + + syna,startup-delay-ms = <100>; + + rmi4-f01@1 { + reg = <1>; + syna,nosleep-mode = <1>; // Allow sleeping + }; + + rmi4-f11@11 { + reg = <11>; + syna,sensor-type = <1>; // Touchscreen + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + compatible = "motorola,osprey-panel"; + reg = <0>; + + vsp-supply = <®_lcd_pos>; + vsn-supply = <®_lcd_neg>; + vddio-supply = <®_panel_vddio>; + + reset-gpios = <&msmgpio 78 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC3", "MIC BIAS External1"; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + qcom,micbias1-ext-cap; + qcom,micbias2-ext-cap; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +/* CTS/RTX are not used */ +&blsp1_uart1_default { + pins = "gpio0", "gpio1"; +}; +&blsp1_uart1_sleep { + pins = "gpio0", "gpio1"; +}; + +&msmgpio { + battery_alert_default: battery-alert-default { + pins = "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio78"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio78"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + panel_vddio_default: panel-vddio-default { + pins = "gpio36"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touch_int_default: touch-int-default { + pins = "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touch_vdda_default: touch-vdda-default { + pins = "gpio114"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb-id { + usb_id_default: id-default { + pins = "gpio91"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; + usb_id_sleep: id-sleep { + pins = "gpio91"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + }; +}; + +&pm8916_gpios { + disp_en_default: disp-en-default { + pins = "gpio3", "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + bias-disable; + power-source = ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia-modem.dts new file mode 100644 index 000000000..5b8e44c03 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia-modem.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-motorola-surnia.dts" +#include "msm8916-modem.dtsi" + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts new file mode 100644 index 000000000..91d06982d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include +#include + +/ { + model = "Motorola Moto E 2015 LTE (surnia)"; + compatible = "motorola,surnia", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + mpss_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + gps_mem: gps@8bd00000 { + status = "disabled"; + reg = <0x0 0x8bd00000 0x0 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8bf00000 { + reg = <0x0 0x8bf00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c500000 { + reg = <0x0 0x8c500000 0x0 0x600000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 91 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_id_default>; + pinctrl-1 = <&usb_id_sleep>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + rmi4@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l16>; + vio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default>; + + syna,startup-delay-ms = <100>; + + rmi4-f01@1 { + reg = <1>; + syna,nosleep-mode = <1>; // Allow sleeping + }; + + rmi4-f11@11 { + reg = <11>; + syna,sensor-type = <1>; // Touchscreen + }; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + battery@36 { + compatible = "maxim,max17050"; + reg = <0x36>; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,cold-temp = <(-200)>; + maxim,dead-volt = <3200>; + maxim,over-volt = <4500>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&battery_alert_default>; + }; +}; + +&blsp1_uart1 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + compatible = "motorola,surnia-panel"; + reg = <0>; + + power-supply = <&pm8916_l17>; + reset-gpios = <&msmgpio 78 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC3", "MIC BIAS External1"; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + qcom,micbias1-ext-cap; + qcom,micbias2-ext-cap; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +/* CTS/RTX are not used */ +&blsp1_uart1_default { + pins = "gpio0", "gpio1"; +}; +&blsp1_uart1_sleep { + pins = "gpio0", "gpio1"; +}; + +&msmgpio { + battery_alert_default: battery-alert-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio78"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio78"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + ts_int_default: ts-int-default { + pins = "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb-id { + usb_id_default: id-default { + pins = "gpio91"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; + usb_id_sleep: id-sleep { + pins = "gpio91"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-oppo-a51f.dts b/arch/arm64/boot/dts/qcom/msm8916-oppo-a51f.dts new file mode 100644 index 000000000..3338fcb7f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-oppo-a51f.dts @@ -0,0 +1,537 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include + +/ { + model = "Oppo Mirror 5s (A51f)"; + compatible = "oppo,a51f", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + volume-down { + label = "Volume Down"; + gpios = <&msmgpio 108 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 121 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + + reg_lcd_pos: regulator-lcd-pos { + compatible = "regulator-fixed"; + regulator-name = "lcd-pos"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_p_en_default>; + }; + + reg_lcd_neg: regulator-lcd-neg { + compatible = "regulator-fixed"; + regulator-name = "lcd-neg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&msmgpio 98 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_n_en_default>; + }; + + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&msmgpio 116 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_vmmc_en_default>; + }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + VCC-supply = <®_speaker_boost>; + enable-gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amp"; + + gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&speaker_amp_default>; + + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; + + reg_speaker_boost: regulator-speaker-boost { + compatible = "regulator-fixed"; + regulator-name = "yda145-amp"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpios = <&msmgpio 118 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&speaker_boost_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@19 { + compatible = "st,lis3dh-accel"; + reg = <0x19>; + interrupt-parent = <&msmgpio>; + interrupts = <112 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + backlight: led-controller@38 { + compatible = "ti,lm3630a"; + reg = <0x38>; + enable-gpios = <&msmgpio 69 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_default>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; + max-brightness = <255>; + }; + }; + + rmi4@20 { + compatible = "syna,rmi4_i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; // Allow sleeping + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; // Touchscreen + syna,clip-x-high = <1100>; + syna,clip-y-high = <1770>; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + compatible = "oppo,15009-nt35592-jdi"; + reg = <0>; + + backlight = <&backlight>; + vsp-supply = <®_lcd_pos>; + vsn-supply = <®_lcd_neg>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + vmmc-supply = <®_sd_vmmc>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + model = "oppo-a51f"; + audio-routing = + "Speaker Amp INL", "HPH_L_EXT", + "Speaker Amp INR", "HPH_L_EXT", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS External2"; + + aux-devs = <&speaker_amp>; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + qcom,micbias1-ext-cap; + qcom,micbias2-ext-cap; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio112"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + bl_en_default: bl-en-default { + pins = "gpio69"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio108"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + lcd_p_en_default: lcd-p-en-default { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + lcd_n_en_default: lcd-n-en-default { + pins = "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + sd_vmmc_en_default: sd-vmmc-en-default { + pins = "gpio116"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + speaker_amp_default: speaker-amp-default { + pins = "gpio120"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + speaker_boost_default: speaker-boost-default { + pins = "gpio118"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 4dc437f13..7dedb91b9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -220,6 +220,22 @@ i2c2_sleep: i2c2-sleep { bias-disable; }; + i2c3_default: i2c3-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep { + pins = "gpio10", "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + i2c4_default: i2c4-default { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi index cd626e7db..539823b2c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -17,13 +17,10 @@ &dsi_phy0 { }; &mpss { - cx-supply = <&pm8916_s1>; - mx-supply = <&pm8916_l3>; pll-supply = <&pm8916_l7>; }; &pronto { - vddmx-supply = <&pm8916_l3>; vddpx-supply = <&pm8916_l7>; iris { @@ -53,13 +50,13 @@ &rpm_requests { smd_rpm_regulators: pm8916-regulators { compatible = "qcom,rpm-pm8916-regulators"; - pm8916_s1: s1 {}; + /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */ pm8916_s3: s3 {}; pm8916_s4: s4 {}; pm8916_l1: l1 {}; pm8916_l2: l2 {}; - pm8916_l3: l3 {}; + /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */ pm8916_l4: l4 {}; pm8916_l5: l5 {}; pm8916_l6: l6 {}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index fce2f24eb..cee0d2ab5 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -1,9 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-only #include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" #include #include #include +#include / { aliases { @@ -20,6 +22,31 @@ tz-apps@85500000 { reg = <0x0 0x85500000 0x0 0xb00000>; no-map; }; + + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + mpss_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x5400000>; + no-map; + }; + + gps_mem: gps@8bc00000 { + status = "disabled"; + reg = <0x0 0x8bc00000 0x0 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8be00000 { + reg = <0x0 0x8be00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c400000 { + reg = <0x0 0x8c400000 0x0 0x600000>; + no-map; + }; }; gpio-keys { @@ -95,6 +122,70 @@ muic: extcon@25 { pinctrl-0 = <&muic_int_default>; }; }; + + i2c-tkey { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + touchkey: touchkey@20 { + /* Note: Actually an Abov MCU that implements same interface */ + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <98 IRQ_TYPE_EDGE_FALLING>; + + /* vcc/vdd-supply are board-specific */ + vddio-supply = <&pm8916_l6>; + + linux,keycodes = ; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_default>; + }; + }; + + i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + #address-cells = <1>; + #size-cells = <0>; + + nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + + reg = <0x27>; + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + s3fwrn5,en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>; + s3fwrn5,fw-gpios = <&msmgpio 49 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + speaker_codec: audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + vddd-supply = <&pm8916_l5>; + sound-name-prefix = "Speaker"; + #sound-dai-cells = <0>; + }; }; &blsp_i2c2 { @@ -122,6 +213,34 @@ magnetometer@12 { }; }; +&blsp_i2c4 { + status = "okay"; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_BOTH>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + interrupt-parent = <&msmgpio>; + interrupts = <62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_default>; + }; +}; + &blsp1_uart2 { status = "okay"; }; @@ -132,6 +251,19 @@ &dsi0 { pinctrl-1 = <&mdss_sleep>; }; +&lpass { + status = "okay"; + + dai@3 { + reg = ; + qcom,playback-sd-lines = <1>; + }; +}; + +&mdss { + status = "okay"; +}; + &pm8916_resin { status = "okay"; linux,code = ; @@ -159,6 +291,50 @@ &sdhc_2 { cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; }; +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus>; + + model = "samsung-a2015"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + + dai-link-quaternary { + link-name = "Quaternary MI2S"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + &usb { status = "okay"; extcon = <&muic>, <&muic>; @@ -183,11 +359,6 @@ &smd_rpm_regulators { vdd_l4_l5_l6-supply = <&pm8916_s4>; vdd_l7-supply = <&pm8916_s4>; - s1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1300000>; - }; - s3 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1300000>; @@ -208,11 +379,6 @@ l2 { regulator-max-microvolt = <1200000>; }; - l3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1287500>; - }; - l4 { regulator-min-microvolt = <2050000>; regulator-max-microvolt = <2050000>; @@ -300,6 +466,14 @@ accel_int_default: accel-int-default { bias-disable; }; + fg_alert_default: fg-alert-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default { pins = "gpio107", "gpio109"; function = "gpio"; @@ -357,6 +531,46 @@ muic_int_default: muic-int-default { bias-disable; }; + nfc_default: nfc-default { + pins = "gpio0", "gpio1", "gpio20"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + + int-fw { + pins = "gpio21", "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + pmic_int_default: pmic-int-default { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_default: tkey-default { + pins = "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_i2c_default: tkey-i2c-default { + pins = "gpio16", "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + tsp_en_default: tsp-en-default { pins = "gpio73"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-modem.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-modem.dtsi new file mode 100644 index 000000000..08e96b03b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-modem.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-modem.dtsi" + +&q6afedai { + dai@22 { + reg = ; + qcom,sd-lines = <1>; + }; +}; + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + /delete-node/ dai-link-quaternary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + + dai-link-quaternary-qdsp6 { + link-name = "Quaternary MI2S"; + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur-modem.dts new file mode 100644 index 000000000..d9c78e1e9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur-modem.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-samsung-a3u-eur.dts" +#include "msm8916-samsung-a2015-modem.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 086f07ead..6cc2eaeb1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -20,6 +20,37 @@ reg_panel_vdd3: regulator-panel-vdd3 { pinctrl-names = "default"; pinctrl-0 = <&panel_vdd3_default>; }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; + + reg_key_led: regulator-key-led { + compatible = "regulator-fixed"; + regulator-name = "key_led"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_led_en_default>; + }; +}; + +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_key_led>; }; &accelerometer { @@ -28,6 +59,27 @@ &accelerometer { "0", "0", "1"; }; +&blsp_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt541"; + + reg = <0x20>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + + vdd-supply = <®_vdd_tsp>; + vddo-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default>; + }; +}; + &dsi0 { panel@0 { reg = <0>; @@ -59,4 +111,28 @@ panel_vdd3_default: panel-vdd3-default { drive-strength = <2>; bias-disable; }; + + tkey_en_default: tkey-en-default { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_led_en_default: tkey-led-en-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur-modem.dts new file mode 100644 index 000000000..5e1f22ec6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur-modem.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-samsung-a5u-eur.dts" +#include "msm8916-samsung-a2015-modem.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index e352914d5..3aaeef3fb 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -31,6 +31,24 @@ reg_vlcd_vci: regulator-vlcd-vci { gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; +}; + +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_touch_key>; }; &accelerometer { @@ -97,6 +115,14 @@ lcd_on_default: lcd-on-default { bias-disable; }; + tkey_en_default: tkey-en-default { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + ts_int_default: ts-int-default { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts new file mode 100644 index 000000000..9df7f0198 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include + +/ { + model = "Samsung Galaxy Grand Prime (CAN)"; + compatible = "samsung,gprimeltecan", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + muic: extcon@25 { + compatible = "siliconmitus,sm5502-muic"; + + reg = <0x25>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&muic>, <&muic>; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + muic_int_default: muic-int-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j3ltespr.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j3ltespr.dts new file mode 100644 index 000000000..877da2d80 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j3ltespr.dts @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include + +/ { + model = "Samsung Galaxy J3 2016 (J320P)"; + compatible = "samsung,j3ltespr", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + // Additional memory used by Samsung firmware modifications + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + // FIXME: Use extcon device provided by MUIC driver when available + usb_vbus: usb-vbus { + compatible = "linux,extcon-usb-gpio"; + vbus-gpio = <&msmgpio 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&usb_vbus>; +}; + +&usb_hs_phy { + extcon = <&usb_vbus>; + qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5nlte.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5nlte.dts new file mode 100644 index 000000000..d0ca14a27 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5nlte.dts @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include + +/ { + model = "Samsung Galaxy J5 2015 (SM-J500FN)"; + compatible = "samsung,j5nlte", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + // FIXME: Use extcon device provided by MUIC driver when available + usb_vbus: usb-vbus { + compatible = "linux,extcon-usb-gpio"; + vbus-gpio = <&msmgpio 105 GPIO_ACTIVE_HIGH>; + }; + + i2c-sensors { + compatible = "i2c-gpio"; + + sda-gpios = <&msmgpio 31 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 32 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&sensors_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + st,drdy-int-pin = <1>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + home-key { + lable = "Home Key"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + reg = <0>; + + compatible = "samsung,s6e8aa5x01-ams497hy01"; + + vdd3-supply = <&pm8916_l6>; + vci-supply = <&pm8916_l17>; + + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&usb_vbus>; +}; + +&usb_hs_phy { + extcon = <&usb_vbus>; + qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + sensors_i2c_default: sensors-i2c-default { + pins = "gpio31", "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518-modem.dts new file mode 100644 index 000000000..903b2920e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518-modem.dts @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-wingtech-wt86518.dts" +#include "msm8916-wingtech-wt865x8-modem.dtsi" + +&memshare { status = "disabled"; }; +&gps_mem { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518.dts new file mode 100644 index 000000000..238872ffe --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518.dts @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-wingtech-wt865x8.dtsi" + +/ { + model = "Lenovo A6000 (Wingtech WT86518)"; + compatible = "wingtech,wt86518", "qcom,msm8916"; + + speaker_amp: audio-amplifier { + compatible = "awinic,aw8738"; + + pinctrl-names = "default"; + pinctrl-0 = <&spk_ext_pa_default>; + + enable-gpios = <&msmgpio 119 GPIO_ACTIVE_HIGH>; + aw8738,mode = <1>; + sound-name-prefix = "Speaker Amp"; + }; +}; + +&blsp_i2c2 { + accelerometer@e { + compatible = "kionix,kxcj91008"; + reg = <0xe>; + + vdd-supply = <&pm8916_l6>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; +}; + +&headphones_switch { + VCC-supply = <&pm8916_l17>; +}; + +&pm8916_charger { + status = "okay"; + + qcom,vdd-safe = <4300000>; + qcom,ibat-safe = <900000>; + + monitored-battery = <&battery>; +}; + +&pm8916_bms { + power-supplies = <&pm8916_charger>; +}; + +®_lcd_neg { + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; +}; + +®_lcd_pos { + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; +}; + +&sound { + model = "wt88047"; + audio-routing = + "Speaker Amp IN", "HPH_R_EXT", + "Headphones Switch INL", "HPH_L", + "Headphones Switch INR", "HPH_R", + "AMIC1", "MIC BIAS Internal1", + "AMIC2", "MIC BIAS Internal2"; + aux-devs = <&speaker_amp>, <&headphones_switch>; +}; + +&usb { + extcon = <&pm8916_charger>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&pm8916_charger>; +}; + +&msmgpio { + spk_ext_pa_default: spk-ext-pa-default { + pins = "gpio119"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528-modem.dts new file mode 100644 index 000000000..c040bfb00 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528-modem.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-wingtech-wt86528.dts" +#include "msm8916-wingtech-wt865x8-modem.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528.dts new file mode 100644 index 000000000..9df9ef24c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528.dts @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-wingtech-wt865x8.dtsi" + +/ { + model = "Lenovo A6010 (Wingtech WT86528)"; + compatible = "wingtech,wt86528", "qcom,msm8916"; + + /* left AW8736 */ + speaker_amp_left: audio-amplifier-left { + compatible = "awinic,aw8738"; + + pinctrl-names = "default"; + pinctrl-0 = <&spk_ext_pa_left_default>; + + enable-gpios = <&msmgpio 119 GPIO_ACTIVE_HIGH>; + aw8738,mode = <3>; + sound-name-prefix = "Speaker Amp L"; + }; + + /* right AW8736 */ + speaker_amp_right: audio-amplifier-right { + compatible = "awinic,aw8738"; + + pinctrl-names = "default"; + pinctrl-0 = <&spk_ext_pa_right_default>; + + enable-gpios = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + aw8738,mode = <3>; + sound-name-prefix = "Speaker Amp R"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_default>; + + led-0 { + gpios = <&msmgpio 16 GPIO_ACTIVE_LOW>; + label = "red"; + default-state = "off"; + retain-state-suspended; + }; + + led-1 { + gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + label = "green"; + default-state = "off"; + retain-state-suspended; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + }; + + imu@68 { + compatible = "invensense,mpu6880"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +®_lcd_neg { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +®_lcd_pos { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +&sound { + model = "wt86528"; + audio-routing = + "Speaker Amp L IN", "HPH_L_EXT", + "Speaker Amp R IN", "HPH_R_EXT", + "Headphones Switch INL", "HPH_L", + "Headphones Switch INR", "HPH_R", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + aux-devs = <&speaker_amp_left>, <&speaker_amp_right>, <&headphones_switch>; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + qcom,micbias1-ext-cap; +}; + +&msmgpio { + gpio_leds_default: gpio-leds-default { + pins = "gpio16", "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + imu_default: imu-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + spk_ext_pa_left_default: spk-ext-pa-left-default { + pins = "gpio119"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + spk_ext_pa_right_default: spk-ext-pa-right-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8-modem.dtsi b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8-modem.dtsi new file mode 100644 index 000000000..d250af83b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8-modem.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-modem.dtsi" + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi new file mode 100644 index 000000000..59367b23a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi @@ -0,0 +1,441 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + mpss_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + gps_mem: gps@8bd00000 { + status = "disabled"; + reg = <0x0 0x8bd00000 0x0 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8bf00000 { + reg = <0x0 0x8bf00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c500000 { + reg = <0x0 0x8c500000 0x0 0x600000>; + no-map; + }; + }; + + headphones_switch: audio-switch { + compatible = "simple-audio-amplifier"; + + pinctrl-names = "default"; + pinctrl-0 = <&headphones_switch_default>; + + enable-gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Headphones Switch"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + }; + + battery: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4350000>; + energy-full-design-microwatt-hours = <8740000>; + charge-full-design-microamp-hours = <2300000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = <4328000 100>, <4266000 95>, <4208000 90>, + <4154000 85>, <4102000 80>, <4062000 75>, <3992000 70>, + <3960000 65>, <3914000 60>, <3870000 55>, <3840000 50>, + <3818000 45>, <3800000 40>, <3784000 35>, <3770000 30>, + <3756000 25>, <3736000 20>, <3714000 16>, <3696000 13>, + <3690000 11>, <3689000 10>, <3688000 9>, <3686000 8>, + <3682000 7>, <3670000 6>, <3639000 5>, <3592000 4>, + <3530000 3>, <3448000 2>, <3320000 1>, <3000000 0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + + pinctrl-names = "default"; + pinctrl-0 = <&tps65132_en_default>; + + reg_lcd_pos: outp { + regulator-name = "outp"; + enable-gpios = <&msmgpio 118 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + enable-gpios = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + /* actually FT5336 */ + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pm8916_l17>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + + panel@0 { + compatible = "wingtech,wt865x8-panel"; + reg = <0>; + + vsp-supply = <®_lcd_pos>; + vsn-supply = <®_lcd_neg>; + + backlight = <&backlight>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_bms { + status = "okay"; + monitored-battery = <&battery>; +}; + +&pm8916_pwm { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_out>; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; +}; + +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + headphones_switch_default: headphones-switch-default { + pins = "gpio120"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + reset { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + tps65132_en_default: tps65132-en-default { + pins = "gpio117", "gpio118"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; + +&pm8916_mpps { + pwm_out: mpp4 { + pins = "mpp4"; + function = "digital"; + + output-low; + qcom,dtest = <1>; + power-source = ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047-modem.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047-modem.dts new file mode 100644 index 000000000..68faa6b02 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047-modem.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "msm8916-wingtech-wt88047.dts" +#include "msm8916-modem.dtsi" + +/* + * The modem firmware sends a "query_size" memshare request for client ID 1, + * but basically does not do anything with it. GPS works only if: + * - Memshare is not present or + * - Memshare replies to the request with an error + * Overall it seems pointless to enable memshare for this device. + */ +&memshare { + status = "disabled"; +}; + +&sound { + /delete-node/ dai-link-primary; + /delete-node/ dai-link-tertiary; + + dai-link-primary-qdsp6 { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary-qdsp6 { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts new file mode 100644 index 000000000..40023fdf8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include "msm8916-no-psci.dtsi" +#include +#include +#include +#include +#include + +/ { + model = "Wingtech WT88047"; + compatible = "wingtech,wt88047", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /delete-node/ wcnss@89300000; + /delete-node/ venus@89900000; + + mpss_mem: gps_mem: mpss@86800000 { + status = "disabled"; + reg = <0x0 0x86800000 0x0 0x5100000>; + no-map; + }; + + wcnss_mem: wcnss@8b900000 { + reg = <0x0 0x8b900000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8bf00000 { + reg = <0x0 0x8bf00000 0x0 0x600000>; + no-map; + }; + }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + + pinctrl-names = "default"; + pinctrl-0 = <&speaker_amp_default>; + + enable-gpios = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amp"; + }; + + /* + * According to the schematics this is actually an analog switch, + * but given that we need to enable the GPIO to get sound on headphones, + * modelling it as simple-audio-amplifier seems to work just fine. + */ + headphones_switch: audio-switch { + compatible = "simple-audio-amplifier"; + + pinctrl-names = "default"; + pinctrl-0 = <&headphones_switch_default>; + + enable-gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Headphones Switch"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + imu@68 { + compatible = "invensense,mpu6880"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + charger: battery@14 { + compatible = "qcom,smb1360"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <62 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&smb_int_default>; + + /* + * Some properties are battery-specific. Battery detection + * happens in the bootloader, so it will fill those appropriately + * and set status = "okay". + */ + status = "disabled"; + + qcom,rsense-10mohm; + + qcom,float-voltage-mv = <4350>; + qcom,iterm-ma = <100>; + qcom,charging-timeout = <192>; /* Not configured in downstream */ + qcom,chg-inhibit-disabled; + + qcom,fg-batt-capacity-mah = <0>; /* Set by bootloader */ + qcom,fg-cc-soc-coeff = <0>; /* Set by bootloader */ + qcom,fg-cutoff-voltage-mv = <3400>; + qcom,fg-iterm-ma = <150>; + qcom,fg-ibatt-standby-ma = <200>; + qcom,fg-cc-to-cv-mv = <4328>; + qcom,thermistor-c1-coeff = <0>; /* Set by bootloader */ + qcom,fg-auto-recharge-soc = <95>; /* 99 in downstream */ + + qcom,otp-hard-jeita-config; + qcom,otp-hot-bat-decidegc = <600>; + qcom,otp-cold-bat-decidegc = <0>; + + qcom,soft-jeita-config; + qcom,warm-bat-decidegc = <450>; + qcom,cool-bat-decidegc = <100>; + qcom,soft-jeita-comp-voltage-mv = <4000>; + qcom,soft-jeita-comp-current-ma = <600>; + + qcom,shdn-after-pwroff; + qcom,fg-reset-at-pon; + qcom,fg-reset-threshold-mv = <100>; + + usb_otg_vbus: usb-otg-vbus { + regulator-max-microamp = <950000>; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + /* Actually FT6346 but seems similar enough */ + compatible = "edt,edt-ft5506"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l17>; + // TODO: iovcc-supply <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8916_l16>; + + led@0 { + reg = <0>; + led-max-microamp = <15000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + + led@1 { + reg = <1>; + led-max-microamp = <15000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + + led@2 { + reg = <2>; + led-max-microamp = <15000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&dsi0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_active>; + pinctrl-1 = <&mdss_suspend>; + + panel@0 { + compatible = "wingtech,wt88047-panel"; + reg = <0>; + + backlight = <&backlight>; + power-supply = <&pm8916_l17>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_pwm { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_out>; +}; + +&pm8916_resin { + status = "okay"; + linux,code = ; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; +}; + +&sound { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + model = "wt88047"; + audio-routing = + "Speaker Amp INL", "HPH_R_EXT", + "Speaker Amp INR", "HPH_R_EXT", + "Headphones Switch INL", "HPH_L", + "Headphones Switch INR", "HPH_R", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2"; + aux-devs = <&speaker_amp>, <&headphones_switch>; + + dai-link-primary { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + dai-link-tertiary { + link-name = "Tertiary MI2S"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; +}; + +&usb_hs_phy { + extcon = <&charger>; +}; + +&wcd_codec { + qcom,micbias1-ext-cap; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + headphones_switch_default: headphones-switch-default { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + imu_default: imu-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_active: mdss-active { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_suspend: mdss-suspend { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + smb_int_default: smb_int_default { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + speaker_amp_default: speaker-amp-default { + pins = "gpio117"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + reset { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; + +&pm8916_mpps { + pwm_out: mpp4 { + pins = "mpp4"; + function = "digital"; + + output-low; + qcom,dtest = <1>; + power-source = ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 1644fa06d..f40bb6ea4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -8,7 +8,12 @@ #include #include #include +#include #include +#include +#include +#include +#include #include / { @@ -234,6 +239,28 @@ scm: scm { }; }; + memshare: memshare { + compatible = "qcom,memshare"; + qcom,legacy-client = <&memshare_gps>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + mpss@0 { + reg = ; + qcom,qrtr-node = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + memshare_gps: gps@0 { + reg = <0>; + }; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; @@ -289,6 +316,35 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8916"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,msm8916-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; }; }; }; @@ -883,6 +939,7 @@ tcsr: syscon@1937000 { }; mdss: mdss@1a00000 { + status = "disabled"; compatible = "qcom,mdss"; reg = <0x01a00000 0x1000>, <0x01ac8000 0x3000>; @@ -1277,6 +1334,10 @@ mpss: remoteproc@4080000 { interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + power-domains = <&rpmpd MSM8916_VDDCX>, + <&rpmpd MSM8916_VDDMX>; + power-domain-names = "cx", "mx"; + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, <&gcc GCC_BOOT_ROM_AHB_CLK>, @@ -1310,6 +1371,102 @@ smd-edge { label = "hexagon"; + apr: apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,apr-domain = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + apr-service@3 { + reg = ; + compatible = "qcom,q6core"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = ; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@16 { + reg = ; + qcom,sd-lines = <0 1>; + }; + + dai@20 { + reg = ; + qcom,sd-lines = <0 1>; + }; + }; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = ; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@0 { + reg = <0>; + direction = ; + }; + dai@1 { + reg = <1>; + direction = ; + }; + dai@2 { + reg = <2>; + direction = ; + }; + dai@3 { + reg = <3>; + direction = ; + is-compress-dai; + }; + }; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = ; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + + q6mvm: apr-service@9 { + compatible = "qcom,q6mvm"; + reg = ; + status = "disabled"; + + q6voicedai: dais { + compatible = "qcom,q6voice-dais"; + #sound-dai-cells = <0>; + }; + }; + + q6cvs: apr-service@a { + compatible = "qcom,q6cvs"; + reg = ; + status = "disabled"; + }; + + q6cvp: apr-service@b { + compatible = "qcom,q6cvp"; + reg = ; + status = "disabled"; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,smd-channels = "fastrpcsmd-apps-dsp"; @@ -1405,7 +1562,7 @@ sdhc_2: sdhci@7864000 { status = "disabled"; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; interrupts = ; @@ -1508,6 +1665,21 @@ blsp_spi2: spi@78b6000 { status = "disabled"; }; + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp_spi3: spi@78b7000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b7000 0x500>; @@ -1674,6 +1846,10 @@ pronto: remoteproc@a21b000 { <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + power-domains = <&rpmpd MSM8916_VDDCX>, + <&rpmpd MSM8916_VDDMX>; + power-domain-names = "cx", "mx"; + qcom,state = <&wcnss_smp2p_out 0>; qcom,state-names = "stop"; diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 5969b5cfd..23cdcc9f7 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" / { model = "LG Nexus 5X"; @@ -44,7 +46,7 @@ &blsp1_uart2 { }; &rpm_requests { - pm8994-regulators { + pm8994_regulators: pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; vdd_l1-supply = <&pm8994_s1>; @@ -53,15 +55,17 @@ pm8994-regulators { vdd_l4_27_31-supply = <&pm8994_s3>; vdd_l5_7-supply = <&pm8994_s3>; vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l8_16_30-supply = <&vph_pwr>; + vdd_l9_10_18_22-supply = <&vph_pwr>; + vdd_l13_19_23_24-supply = <&vph_pwr>; vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l17_29-supply = <&vph_pwr>; + vdd_l20_21-supply = <&vph_pwr>; vdd_l25-supply = <&pm8994_s5>; vdd_lvs1_2 = <&pm8994_s4>; + /* S1, S2, S6 and S12 are managed by RPMPD */ + pm8994_s1: s1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; @@ -93,6 +97,8 @@ pm8994_s7: s7 { regulator-max-microvolt = <1000000>; }; + /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */ + pm8994_l1: l1 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -113,18 +119,14 @@ pm8994_l4: l4 { regulator-max-microvolt = <1225000>; }; - pm8994_l5: l5 { - /* TODO */ - }; + /* L5 is inaccessible from RPM */ pm8994_l6: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l7: l7 { - /* TODO */ - }; + /* L7 is inaccessible from RPM */ pm8994_l8: l8 { regulator-min-microvolt = <1800000>; @@ -266,9 +268,22 @@ pm8994_l32: l32 { */ }; }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 {}; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass {}; + }; }; -&sdhc_1 { +&sdhc1 { status = "okay"; mmc-hs400-1_8v; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts new file mode 100644 index 000000000..5322b9ce5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Gustave Monce + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "msm8994-msft-lumia-octagon.dtsi" + +/ { + model = "Microsoft Lumia 950"; + compatible = "microsoft,talkman", "qcom,msm8992"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts deleted file mode 100644 index 3cc01f022..000000000 --- a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2020, Konrad Dybcio - */ - -/dts-v1/; - -#include "msm8992.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" -#include -#include - -/ { - model = "Microsoft Lumia 950"; - compatible = "microsoft,talkman", "qcom,msm8992"; - - /* Most Lumia 950 users use GRUB to load their kernels, - * hence there is no need for msm-id and friends. - */ - - /* This enables graphical output via bootloader-enabled display. - * acpi=no is required due to WP platforms having ACPI support, but - * only for Windows-based OSes. - */ - chosen { - bootargs = "earlycon=efifb console=efifb acpi=no"; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - }; -}; - -&sdhc_1 { - status = "okay"; - - mmc-hs200-1_8v; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 4f64ca3ea..357d55496 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -70,21 +70,6 @@ ramoops@dfc00000 { pmsg-size = <0x20000>; }; - continuous_splash: framebuffer@3401000{ - reg = <0x0 0x3401000 0x0 0x2200000>; - no-map; - }; - - dfps_data_mem: dfps_data_mem@3400000 { - reg = <0x0 0x3400000 0x0 0x1000>; - no-map; - }; - - peripheral_region: peripheral_region@7400000 { - reg = <0x0 0x7400000 0x0 0x1c00000>; - no-map; - }; - modem_region: modem_region@9000000 { reg = <0x0 0x9000000 0x0 0x5a00000>; no-map; @@ -97,43 +82,49 @@ tzapp: modem_region@ea00000 { }; }; -&blsp_i2c2 { +&blsp1_i2c2 { status = "okay"; /* Atmel or Synaptics touchscreen */ }; -&blsp_i2c5 { +&blsp1_i2c5 { status = "okay"; - /* Silabs si4705 FM transmitter */ + /* ST lsm6db0 gyro/accelerometer */ }; -&blsp_i2c6 { +&blsp1_i2c6 { status = "okay"; - /* NCI NFC, + /* + * NXP NCI NFC, * TI USB320 Type-C controller, * Pericom 30216a USB (de)mux switch */ }; -&blsp_i2c7 { +&blsp2_i2c1 { status = "okay"; /* cm36686 proximity and ambient light sensor */ }; -&blsp_i2c13 { +&blsp2_i2c5 { status = "okay"; - /* ST lsm6db0 gyro/accelerometer */ + /* Silabs si4705 FM transmitter */ }; &blsp2_uart2 { status = "okay"; }; +&peripheral_region { + reg = <0x0 0x7400000 0x0 0x1c00000>; + no-map; +}; + &rpm_requests { pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; @@ -144,24 +135,16 @@ pm8994-regulators { vdd_l4_27_31-supply = <&pm8994_s3>; vdd_l5_7-supply = <&pm8994_s3>; vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l8_16_30-supply = <&vph_pwr>; + vdd_l9_10_18_22-supply = <&vph_pwr>; + vdd_l13_19_23_24-supply = <&vph_pwr>; vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l17_29-supply = <&vph_pwr>; + vdd_l20_21-supply = <&vph_pwr>; vdd_l25-supply = <&pm8994_s5>; vdd_lvs1_2 = <&pm8994_s4>; - pm8994_s1: s1 { - /* unused */ - status = "disabled"; - }; - - pm8994_s2: s2 { - /* unused */ - status = "disabled"; - }; + /* S1, S2, S6 and S12 are managed by RPMPD */ pm8994_s3: s3 { regulator-min-microvolt = <1300000>; @@ -186,6 +169,8 @@ pm8994_s7: s7 { regulator-max-microvolt = <1000000>; }; + /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */ + pm8994_l1: l1 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -206,20 +191,14 @@ pm8994_l4: l4 { regulator-max-microvolt = <1225000>; }; - pm8994_l5: l5 { - /* unused */ - status = "disabled"; - }; + /* L5 is inaccessible from RPM */ pm8994_l6: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l7: l7 { - /* unused */ - status = "disabled"; - }; + /* L7 is inaccessible from RPM */ pm8994_l8: l8 { regulator-min-microvolt = <1800000>; @@ -352,10 +331,31 @@ pm8994_l32: l32 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + pm8994_lvs1: lvs1 {}; + pm8994_lvs2: lvs2 {}; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; }; }; -&sdhc_1 { +&sdhc1 { status = "okay"; mmc-hs400-1_8v; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 8626b3a50..58fe58cc7 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -2,618 +2,29 @@ /* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. */ -#include -#include +#include "msm8994.dtsi" -/ { - interrupt-parent = <&intc>; +/* 8992 only features 2 A57 cores. */ +/delete-node/ &CPU6; +/delete-node/ &CPU7; +/delete-node/ &cpu6_map; +/delete-node/ &cpu7_map; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - }; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CPU2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CPU3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CPU4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - next-level-cache = <&L2_1>; - enable-method = "psci"; - L2_1: l2-cache { - compatible = "cache"; - cache-level = <2>; - }; - }; - - CPU5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - next-level-cache = <&L2_1>; - enable-method = "psci"; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - - core1 { - cpu = <&CPU1>; - }; - - core2 { - cpu = <&CPU2>; - }; - - core3 { - cpu = <&CPU3>; - }; - }; - - cluster1 { - core0 { - cpu = <&CPU4>; - }; - - core1 { - cpu = <&CPU5>; - }; - }; - }; - }; - - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; - - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - firmware { - scm { - compatible = "qcom,scm-msm8994", "qcom,scm"; - }; - }; - - memory { - device_type = "memory"; - /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = ; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "hvc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - smem_region: smem@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; - no-map; - }; - }; - - sfpb_mutex: hwmutex { - compatible = "qcom,sfpb-mutex"; - syscon = <&sfpb_mutex_regs 0x0 0x100>; - #hwlock-cells = <1>; - }; - - smem { - compatible = "qcom,smem"; - memory-region = <&smem_region>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - hwlocks = <&sfpb_mutex 3>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; - compatible = "simple-bus"; - - intc: interrupt-controller@f9000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0xf9000000 0x1000>, - <0xf9002000 0x1000>; - }; - - apcs: mailbox@f900d000 { - compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; - reg = <0xf900d000 0x2000>; - #mbox-cells = <1>; - }; - - timer@f9020000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0xf9020000 0x1000>; - - frame@f9021000 { - frame-number = <0>; - interrupts = , - ; - reg = <0xf9021000 0x1000>, - <0xf9022000 0x1000>; - }; - - frame@f9023000 { - frame-number = <1>; - interrupts = ; - reg = <0xf9023000 0x1000>; - status = "disabled"; - }; - - frame@f9024000 { - frame-number = <2>; - interrupts = ; - reg = <0xf9024000 0x1000>; - status = "disabled"; - }; - - frame@f9025000 { - frame-number = <3>; - interrupts = ; - reg = <0xf9025000 0x1000>; - status = "disabled"; - }; - - frame@f9026000 { - frame-number = <4>; - interrupts = ; - reg = <0xf9026000 0x1000>; - status = "disabled"; - }; - - frame@f9027000 { - frame-number = <5>; - interrupts = ; - reg = <0xf9027000 0x1000>; - status = "disabled"; - }; - - frame@f9028000 { - frame-number = <6>; - interrupts = ; - reg = <0xf9028000 0x1000>; - status = "disabled"; - }; - }; - - sdhc_1: sdhci@f9824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; - - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on - &sdc1_rclk_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off - &sdc1_rclk_off>; - - regulator-always-on; - bus-width = <8>; - non-removable; - - status = "disabled"; - }; - - blsp1_uart2: serial@f991e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991e000 0x1000>; - interrupts = ; - clock-names = "core", "iface"; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - status = "disabled"; - }; - - blsp_i2c2: i2c@f9924000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9924000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c2_default>; - pinctrl-1 = <&i2c2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - /* Somebody was very creative with their numbering scheme downstream... */ - - blsp_i2c13: i2c@f9927000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9927000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c13_default>; - pinctrl-1 = <&i2c13_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c6: i2c@f9928000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9928000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c6_default>; - pinctrl-1 = <&i2c6_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_uart2: serial@f995e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf995e000 0x1000>; - interrupts = ; - clock-names = "core", "iface"; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_default>; - pinctrl-1 = <&blsp2_uart2_sleep>; - status = "disabled"; - }; - - blsp_i2c7: i2c@f9963000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9963000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c7_default>; - pinctrl-1 = <&i2c7_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c5: i2c@f9967000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9967000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <100000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_default>; - pinctrl-1 = <&i2c5_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8994"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x2000>; - }; - - rpm_msg_ram: memory@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; - }; - - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; - - spmi_bus: spmi@fc4c0000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - reg-names = "core", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = ; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - sfpb_mutex_regs: syscon@fd484000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "syscon"; - reg = <0xfd484000 0x400>; - }; - - tlmm: pinctrl@fd510000 { - compatible = "qcom,msm8994-pinctrl"; - reg = <0xfd510000 0x4000>; - interrupts = ; - gpio-controller; - gpio-ranges = <&tlmm 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_uart2_default: blsp1-uart2-default { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - - blsp1_uart2_sleep: blsp1-uart2-sleep { - function = "gpio"; - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp2_uart2_default: blsp2-uart2-default { - function = "blsp_uart8"; - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - drive-strength = <16>; - bias-disable; - }; - - blsp2_uart2_sleep: blsp2-uart2-sleep { - function = "gpio"; - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - drive-strength = <2>; - bias-pull-down; - }; - - sdc1_clk_on: clk-on { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <6>; - }; - - sdc1_clk_off: clk-off { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; - - sdc1_cmd_on: cmd-on { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <6>; - }; - - sdc1_cmd_off: cmd-off { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - sdc1_data_on: data-on { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <6>; - }; - - sdc1_data_off: data-off { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; - - sdc1_rclk_on: rclk-on { - pins = "sdc1_rclk"; - bias-pull-down; - }; - - sdc1_rclk_off: rclk-off { - pins = "sdc1_rclk"; - bias-pull-down; - }; - - i2c2_default: i2c2-default { - function = "blsp_i2c2"; - pins = "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - - i2c2_sleep: i2c2-sleep { - function = "gpio"; - pins = "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - - i2c5_default: i2c5-default { - /* Don't be fooled! Nobody knows the reason why though... */ - function = "blsp_i2c11"; - pins = "gpio83", "gpio84"; - drive-strength = <2>; - bias-disable; - }; - - i2c5_sleep: i2c5-sleep { - function = "gpio"; - pins = "gpio83", "gpio84"; - drive-strength = <2>; - bias-disable; - }; - - i2c6_default: i2c6-default { - function = "blsp_i2c6"; - pins = "gpio28", "gpio27"; - drive-strength = <2>; - bias-disable; - }; - - i2c6_sleep: i2c6-sleep { - function = "gpio"; - pins = "gpio28", "gpio27"; - drive-strength = <2>; - bias-disable; - }; - - i2c7_default: i2c7-default { - function = "blsp_i2c7"; - pins = "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - - i2c7_sleep: i2c7-sleep { - function = "gpio"; - pins = "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - - i2c13_default: i2c13-default { - /* Not a typo either. */ - function = "blsp_i2c5"; - pins = "gpio23", "gpio24"; - drive-strength = <2>; - bias-disable; - }; - - i2c13_sleep: i2c13-sleep { - function = "gpio"; - pins = "gpio23", "gpio24"; - drive-strength = <2>; - bias-disable; - }; - }; - }; - - smd_rpm: smd { - compatible = "qcom,smd"; - rpm { - interrupts = ; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - qcom,local-pid = <0>; - qcom,remote-pid = <6>; - - rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8994"; - qcom,smd-channels = "rpm_requests"; +&rpmcc { + compatible = "qcom,rpmcc-msm8992"; +}; - rpmcc: rpmcc { - compatible = "qcom,rpmcc-msm8992"; - #clock-cells = <1>; - }; - }; - }; - }; +&tcsr_mutex { + compatible = "qcom,sfpb-mutex"; +}; - timer { - compatible = "arm,armv8-timer"; - interrupts = , +&timer { + interrupts = , , , ; - }; - - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - status = "okay"; - regulator-name = "vph-pwr"; - - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - regulator-always-on; - }; }; +&tlmm { + compatible = "qcom,msm8992-pinctrl"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts new file mode 100644 index 000000000..d0aaf5750 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Gustave Monce + */ + +/dts-v1/; + +#include "msm8994.dtsi" +#include "msm8994-msft-lumia-octagon.dtsi" + +/ { + model = "Microsoft Lumia 950 XL"; + compatible = "microsoft,cityman", "qcom,msm8994"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi new file mode 100644 index 000000000..3a3790a52 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -0,0 +1,909 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Common Board Device Tree for + * Microsoft Mobile MSM8994 Octagon Platforms + * + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Gustave Monce + */ + +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include + +/* + * Delete all generic (msm8994.dtsi) reserved + * memory mappings which are different in this device. + */ +/delete-node/ &adsp_mem; +/delete-node/ &audio_mem; +/delete-node/ &cont_splash_mem; +/delete-node/ &mba_mem; +/delete-node/ &mpss_mem; +/delete-node/ &peripheral_region; +/delete-node/ &rmtfs_mem; +/delete-node/ &smem_mem; + +/ { + /* + * Most Lumia 950/XL users use GRUB to load their kernels, + * hence there is no need for msm-id and friends. + */ + + /* + * This enables graphical output via bootloader-enabled display. + * acpi=no is required due to WP platforms having ACPI support, but + * only for Windows-based OSes. + */ + chosen { + bootargs = "earlycon=efifb console=efifb acpi=no"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + + clocks { + compatible = "simple-bus"; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + autorepeat; + + volupkey { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + camsnapkey { + label = "Camera Snapshot"; + gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + camfocuskey { + label = "Camera Focus"; + gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_front_default &hall_back_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-front-sensor { + label = "Hall Effect Front Sensor"; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + + hall-back-sensor { + label = "Hall Effect Back Sensor"; + gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + + reserved-memory { + /* + * This device being a WP platform has a very different + * memory layout than other Android based devices. + * This memory layout is directly copied from the original + * device UEFI firmware, and adapted based on observations + * using JTAG for the Qualcomm Peripheral Image regions. + */ + + uefi_mem: memory@200000 { + reg = <0 0x200000 0 0x100000>; + no-map; + }; + + mppark_mem: memory@300000 { + reg = <0 0x300000 0 0x80000>; + no-map; + }; + + fbpt_mem: memory@380000 { + reg = <0 0x380000 0 0x1000>; + no-map; + }; + + dbg2_mem: memory@381000 { + reg = <0 0x381000 0 0x4000>; + no-map; + }; + + capsule_mem: memory@385000 { + reg = <0 0x385000 0 0x1000>; + no-map; + }; + + tpmctrl_mem: memory@386000 { + reg = <0 0x386000 0 0x3000>; + no-map; + }; + + uefiinfo_mem: memory@389000 { + reg = <0 0x389000 0 0x1000>; + no-map; + }; + + reset_mem: memory@389000 { + reg = <0 0x389000 0 0x1000>; + no-map; + }; + + resuncached_mem: memory@38e000 { + reg = <0 0x38e000 0 0x72000>; + no-map; + }; + + disp_mem: memory@400000 { + reg = <0 0x400000 0 0x800000>; + no-map; + }; + + uefistack_mem: memory@c00000 { + reg = <0 0xc00000 0 0x40000>; + no-map; + }; + + cpuvect_mem: memory@c40000 { + reg = <0 0xc40000 0 0x10000>; + no-map; + }; + + rescached_mem: memory@400000 { + reg = <0 0xc50000 0 0xb0000>; + no-map; + }; + + tzapps_mem: memory@6500000 { + reg = <0 0x6500000 0 0x500000>; + no-map; + }; + + smem_mem: memory@6a00000 { + reg = <0 0x6a00000 0 0x200000>; + no-map; + }; + + hyp_mem: memory@6c00000 { + reg = <0 0x6c00000 0 0x100000>; + no-map; + }; + + tz_mem: memory@6d00000 { + reg = <0 0x6d00000 0 0x160000>; + no-map; + }; + + rfsa_adsp_mem: memory@6e60000 { + reg = <0 0x6e60000 0 0x10000>; + no-map; + }; + + rfsa_mpss_mem: memory@6e70000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x6e70000 0 0x10000>; + no-map; + + qcom,client-id = <1>; + }; + + /* + * Value obtained from the device original ACPI DSDT table + * MPSS_EFS / SBL + */ + mba_mem: memory@6e80000 { + reg = <0 0x6e80000 0 0x180000>; + no-map; + }; + + /* + * Peripheral Image loader region begin! + * The region reserved for pil is 0x7000000-0xef00000 + */ + + mpss_mem: memory@7000000 { + reg = <0 0x7000000 0 0x5a00000>; + no-map; + }; + + adsp_mem: memory@ca00000 { + reg = <0 0xca00000 0 0x1800000>; + no-map; + }; + + venus_mem: memory@e200000 { + reg = <0 0xe200000 0 0x500000>; + no-map; + }; + + pil_metadata_mem: memory@e700000 { + reg = <0 0xe700000 0 0x4000>; + no-map; + }; + + memory@e704000 { + reg = <0 0xe704000 0 0x7fc000>; + no-map; + }; + /* Peripheral Image loader region end */ + + cnss_mem: memory@ef00000 { + reg = <0 0xef00000 0 0x300000>; + no-map; + }; + }; +}; + +&blsp1_i2c1 { + status = "okay"; + + rmi4-i2c-dev@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <77 IRQ_TYPE_EDGE_FALLING>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + syna,clip-x-low = <0>; + syna,clip-x-high = <1440>; + syna,clip-y-low = <0>; + syna,clip-y-high = <2560>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + /* + * This device uses the Texas Instruments TAS2553, however the TAS2552 driver + * seems to work here. In the future a proper driver might need to + * be written for this device. + */ + tas2553: tas2553@40 { + compatible = "ti,tas2552"; + reg = <0x40>; + + vbat-supply = <&vph_pwr>; + iovdd-supply = <&vreg_s4a_1p8>; + avdd-supply = <&vreg_s4a_1p8>; + + enable-gpio = <&pm8994_gpios 12 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + ak09912: magnetometer@c { + compatible = "asahi-kasei,ak09912"; + reg = <0xc>; + + interrupt-parent = <&tlmm>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_l18a_2p85>; + vid-supply = <&vreg_lvs2a_1p8>; + }; + + zpa2326: barometer@5c { + compatible = "murata,zpa2326"; + reg = <0x5c>; + + interrupt-parent = <&tlmm>; + interrupts = <74 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_lvs2a_1p8>; + }; + + mpu6050: accelerometer@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + + interrupt-parent = <&tlmm>; + interrupts = <64 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_lvs2a_1p8>; + vddio-supply = <&vreg_lvs2a_1p8>; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pn547: pn547@28 { + compatible = "nxp,pn544-i2c"; + + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c1 { + status = "okay"; + + sideinteraction: ad7147_captouch@2c { + compatible = "ad,ad7147_captouch"; + reg = <0x2c>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&grip_default>; + pinctrl-1 = <&grip_sleep>; + + interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>; + + button_num = <8>; + touchpad_num = <0>; + wheel_num = <0>; + slider_num = <0>; + + vcc-supply = <&vreg_l18a_2p85>; + }; + + /* + * The QPDS-T900/QPDS-T930 is a customized part built for Nokia + * by Avago. It is very similar to the Avago APDS-9930 with some + * minor differences. In the future a proper driver might need to + * be written for this device. For now this works fine. + */ + qpdst900: qpdst900@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + + interrupt-parent = <&tlmm>; + interrupts = <40 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&blsp2_i2c5 { + status = "okay"; + + fm_radio: si4705@11 { + compatible = "silabs,si470x"; + reg = <0x11>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 93 GPIO_ACTIVE_HIGH>; + }; + + vreg_lpddr_1p1: fan53526a@6c { + compatible = "fcs,fan53526"; + reg = <0x6c>; + + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vph_pwr>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; /* Turning off DDR power doesn't sound good. */ + }; + + /* ANX7816 HDMI bridge (needs MDSS HDMI) */ +}; + +&blsp2_spi4 { + status = "okay"; + + /* + * This device is a Lattice UC120 USB-C PD PHY. + * It is actually a Lattice iCE40 FPGA pre-programmed by + * the device firmware with a specific bitstream + * enabling USB Type C PHY functionality. + * Communication is done via a proprietary protocol over SPI. + * + * TODO: Once a proper driver is available, replace this. + */ + uc120: ice5lp2k@0 { + compatible = "lattice,ice40-fpga-mgr"; + reg = <0>; + spi-max-frequency = <5000000>; + cdone-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pmi8994_gpios 4 GPIO_ACTIVE_LOW>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + qca6174_bt: bluetooth { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&pm8994_gpios { + bt_en_gpios: bt_en_gpios { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = ; + qcom,drive-strength = ; + bias-pull-down; + }; + }; + + divclk4_pin_a: divclk4 { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + power-source = ; + bias-disable; + }; + }; +}; + +&pm8994_pon { + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0 8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = ; + }; + + volwnkey { + compatible = "qcom,pm8941-resin"; + interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = ; + }; +}; + +&pmi8994_gpios { + pinctrl-0 = <&hd3ss460_pol &hd3ss460_amsel &hd3ss460_en>; + pinctrl-names = "default"; + + /* + * This device uses a TI HD3SS460 Type-C MUX + * As this device has no driver currently, + * the configuration for USB Face Up is set-up here. + * + * TODO: remove once a driver is available + * TODO: add VBUS GPIO 5 + */ + hd3ss460_pol: pol_low { + pins = "gpio8"; + drive-strength = <3>; + bias-pull-down; + }; + + hd3ss460_amsel: amsel_high { + pins = "gpio9"; + drive-strength = <1>; + bias-pull-up; + }; + + hd3ss460_en: en_high { + pins = "gpio10"; + drive-strength = <1>; + bias-pull-up; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2@1700 { + reg = <0x1700 0x100>; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + /* These values were taken from the original firmware ACPI tables */ + pm8994_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p0>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s5a_2p15>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + /* S1, S2, S6 and S12 are managed by RPMPD */ + + vreg_s3a_1p3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-allow-set-load; + regulator-system-load = <300000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + vreg_s5a_2p15: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + vreg_s7a_1p0: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + /* + * S8 - SPMI-managed VDD_APC0 + * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1 + */ + + vreg_l1a_1p0: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l2a_1p25: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-allow-set-load; + regulator-system-load = <4160>; + }; + + vreg_l3a_1p2: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l4a_1p225: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L5 is inaccessible from RPM */ + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <1000>; + }; + + /* L7 is inaccessible from RPM */ + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l11a_1p2: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <35000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <50000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <22000>; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <52000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + vreg_l17a_2p7: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <300000>; + }; + + vreg_l18a_2p85: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <600000>; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l22a_3p0: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <150000>; + }; + + vreg_l23a_2p8: l23 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + regulator-allow-set-load; + regulator-system-load = <5800>; + }; + + vreg_l25a_1p1: l25 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l26a_1p0: l26 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l27a_1p05: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + vreg_l28a_1p0: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <26000>; + }; + + vreg_l29a_2p8: l29 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l30a_1p8: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <2500>; + }; + + vreg_l31a_1p2: l31 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <600000>; + }; + + vreg_l32a_1p8: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { }; + + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p0: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + vph_pwr_bbyp: boost-bypass { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; + +&sdhc1 { + status = "okay"; + + /* + * This device is shipped with HS400 capabable eMMCs + * However various brands have been used in various product batches, + * including a Samsung eMMC (BGND3R) which features a quirk with HS400. + * Set the speed to HS200 as a safety measure. + */ + mmc-hs200-1_8v; +}; + +&sdhc2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>; +}; + +&tlmm { + grip_default: grip-default { + pins = "gpio39"; + function = "gpio"; + drive-strength = <6>; + bias-pull-down; + }; + + grip_sleep: grip-sleep { + pins = "gpio39"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hall_front_default: hall-front-default { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hall_back_default: hall-back-default { + pins = "gpio75"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts new file mode 100644 index 000000000..b5e90c85a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z3+/Z4"; + compatible = "sony,ivy-row", "qcom,msm8994"; +}; + +&pm8994_l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; +}; + +&pm8994_l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +/delete-node/ &pm8994_l19; +/delete-node/ &pm8994_l32; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts new file mode 100644 index 000000000..a1d1a0759 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z4 Tablet (LTE)"; + compatible = "sony,karin-row", "qcom,msm8994"; +}; + +&blsp2_i2c5 { + /* + * TI LP8557 backlight driver @ 2c + * AD AD7146 touch controller @ 2f + * sii8620 HDMI/MHL bridge @ 72 (kitakami-common) + */ +}; + +&pm8994_l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; +}; + +&pm8994_l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&pm8994_l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; +}; + +&pm8994_l25 { + regulator-min-microvolt = <1037500>; + regulator-max-microvolt = <1037500>; +}; + +/delete-node/ &pm8994_l32; +/* Z4 tablets use a different touchscreen. */ +/delete-node/ &touchscreen; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts new file mode 100644 index 000000000..1385956a6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5 Premium"; + compatible = "sony,satsuki-row", "qcom,msm8994"; +}; + +&pm8994_l14 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts index 5d6bbbf6c..d3ba9867a 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Konrad Dybcio */ /dts-v1/; @@ -11,3 +11,5 @@ / { model = "Sony Xperia Z5"; compatible = "sony,sumire-row", "qcom,msm8994"; }; + +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts new file mode 100644 index 000000000..f129479bb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5 Compact"; + compatible = "sony,suzuran-row", "qcom,msm8994"; +}; + +&pm8994_l14 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; +}; + +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index 791f254ac..48de66bf1 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Konrad Dybcio */ #include "msm8994.dtsi" @@ -11,8 +11,17 @@ / { /* required for bootloader to select correct board */ - qcom,msm-id = <0xcf 0x20001>; + + /* + * We support MSM8994 v2 (0x20000) and v2.1 (0x20001). + * The V1 chip (0x0 and 0x10000) is significantly different + * and requires driver-side changes (including CPR, be warned!!). + * Besides that, it's very rare. + */ + qcom,msm-id = <207 0x20000>, <207 0x20001>; + /* We only use pm8994+pmi8994. */ qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>; + /* This property is shared across all kitakami devices. */ qcom,board-id = <8 0>; /* Kitakami firmware doesn't support PSCI */ @@ -63,53 +72,29 @@ button@3 { }; reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - /* This is for getting crash logs using Android downstream kernels */ ramoops@1fe00000 { compatible = "ramoops"; - reg = <0x0 0x1fe00000 0x0 0x200000>; + reg = <0 0x1fe00000 0 0x200000>; console-size = <0x100000>; record-size = <0x10000>; ftrace-size = <0x10000>; pmsg-size = <0x80000>; }; - continuous_splash: framebuffer@3401000{ - reg = <0x0 0x3401000 0x0 0x2200000>; - no-map; - }; - - dfps_data_mem: dfps_data_mem@3400000 { - reg = <0x0 0x3400000 0x0 0x1000>; - no-map; - }; - - peripheral_region: peripheral_region@7400000 { - reg = <0x0 0x7400000 0x0 0x1c00000>; - no-map; - }; - - modem_region: modem_region@9000000 { - reg = <0x0 0x9000000 0x0 0x5a00000>; - no-map; - }; - - tzapp: modem_region@ea00000 { - reg = <0x0 0xea00000 0x0 0x1900000>; + fb_region: fb_region@40000000 { + reg = <0 0x40000000 0 0x1000000>; no-map; }; - fb_region: fb_region@40000000 { - reg = <0x00 0x40000000 0x00 0x1000000>; + tzapp: memory@c7800000 { + reg = <0 0xc7800000 0 0x1900000>; no-map; }; }; }; -&blsp_spi0 { +&blsp1_spi1 { status = "okay"; /* FPC fingerprint reader */ @@ -117,94 +102,330 @@ &blsp_spi0 { /* I2C1 is disabled on this board */ -&blsp_i2c2 { +&blsp1_i2c2 { status = "okay"; + clock-frequency = <355000>; - /* NXP NFC */ + /* NXP PN547 NFC */ }; -&blsp_i2c4 { +&blsp1_i2c4 { status = "okay"; + clock-frequency = <355000>; /* Empty but active */ }; -&blsp_i2c5 { +&blsp1_i2c6 { status = "okay"; + clock-frequency = <355000>; - /* SMB1357 charger and sii8620 HDMI/MHL bridge */ -}; + touchscreen: rmi4-i2c-dev@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + #address-cells = <1>; + #size-cells = <0>; -&blsp_i2c6 { - status = "okay"; + interrupt-parent = <&tlmm>; + interrupts = <42 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + + vdd-supply = <&pm8994_l22>; + vio-supply = <&pm8994_s4>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <220>; - /* Synaptics touchscreen */ + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; }; &blsp1_uart2 { status = "okay"; }; +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* sii8620 HDMI/MHL bridge */ +}; + &blsp2_uart2 { status = "okay"; }; +/* + * Kitakami bootloader only turns cont_splash on when it detects + * specific downstream MDSS/backlight nodes in the active DTB. + * One way to use that framebuffer is to load a secondary instance of + * LK with the downstream DTB appended and then, only from there, load + * mainline Linux. + */ +&cont_splash_mem { + reg = <0 0x3401000 0 0x2200000>; +}; + +&pmi8994_spmi_regulators { + /* + * Yeah, this one *is* managed by RPMPD, but also needs + * to be hacked up as a-o due to the GPU device only accepting a single + * power domain.. which still isn't enough and forces us to bind + * OXILI_CX and OXILI_GX together! + */ + vdd_gfx: s2@1700 { + reg = <0x1700 0x100>; + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + &rpm_requests { pm8994_regulators: pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; - vdd_l1-supply = <&pm8994_s1>; - vdd_l2_26_28-supply = <&pm8994_s3>; - vdd_l3_11-supply = <&pm8994_s3>; - vdd_l4_27_31-supply = <&pm8994_s3>; - vdd_l5_7-supply = <&pm8994_s3>; - vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; - vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; - vdd_l25-supply = <&pm8994_s5>; - vdd_lvs1_2 = <&pm8994_s4>; - - pm8994_s1: s1 {}; - pm8994_s2: s2 {}; - pm8994_s3: s3 {}; - pm8994_s4: s4 {}; - pm8994_s5: s5 {}; - pm8994_s6: s6 {}; - pm8994_s7: s7 {}; - - pm8994_l1: l1 {}; - pm8994_l2: l2 {}; - pm8994_l3: l3 {}; - pm8994_l4: l4 {}; - pm8994_l6: l6 {}; - pm8994_l8: l8 {}; - pm8994_l9: l9 {}; - pm8994_l10: l10 {}; - pm8994_l11: l11 {}; - pm8994_l12: l12 {}; - pm8994_l13: l13 {}; - pm8994_l14: l14 {}; - pm8994_l15: l15 {}; - pm8994_l16: l16 {}; - pm8994_l17: l17 {}; - pm8994_l18: l18 {}; - pm8994_l19: l19 {}; - pm8994_l20: l20 {}; - pm8994_l21: l21 {}; - pm8994_l22: l22 {}; - pm8994_l23: l23 {}; - pm8994_l24: l24 {}; - pm8994_l25: l25 {}; - pm8994_l26: l26 {}; - pm8994_l27: l27 {}; - pm8994_l28: l28 {}; - pm8994_l29: l29 {}; - pm8994_l30: l30 {}; - pm8994_l31: l31 {}; - pm8994_l32: l32 {}; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&pmi8994_s1>; + vdd_l2_l26_l28-supply = <&pm8994_s3>; + vdd_l3_l11-supply = <&pm8994_s3>; + vdd_l4_l27_l31-supply = <&pm8994_s3>; + vdd_l5_l7-supply = <&pm8994_s5>; + vdd_l6_l12_l32-supply = <&pm8994_s5>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>; + vdd_l13_l19_l23_l24-supply = <&pmi8994_bby>; + vdd_l14_l15-supply = <&pm8994_s5>; + vdd_l17_l29-supply = <&pmi8994_bby>; + vdd_l20_l21-supply = <&pmi8994_bby>; + vdd_l25-supply = <&pm8994_s3>; + vdd_lvs1_lvs2-supply = <&pm8994_s4>; + + /* S1, S2, S6 and S12 are managed by RPMPD */ + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + /* + * S8 - SPMI-managed VDD_APC0 + * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1 + */ + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L5 is inaccessible from RPM */ + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* L7 is inaccessible from RPM */ + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l26: l26 { + regulator-min-microvolt = <987500>; + regulator-max-microvolt = <987500>; + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l30: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; pm8994_lvs1: lvs1 {}; pm8994_lvs2: lvs2 {}; @@ -213,22 +434,34 @@ pm8994_regulators: pm8994-regulators { pmi8994_regulators: pmi8994-regulators { compatible = "qcom,rpm-pmi8994-regulators"; - pmi8994_s1: s1 {}; - pmi8994_s2: s2 {}; - pmi8994_s3: s3 {}; - pmi8994_bby: boost-bypass {}; + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; }; }; &sdhc1 { - /* There is an issue with the eMMC causing permanent + /* + * There is an issue with the eMMC causing permanent * damage to the card if a quirk isn't addressed. * Until it's fixed, disable the MMC so as not to brick * devices. */ status = "disabled"; - /* Downstream pushes 2.95V to the sdhci device, + /* + * Downstream pushes 2.95V to the sdhci device, * but upstream driver REALLY wants to make vmmc 1.8v * cause of the hs400-1_8v mode. MMC works fine without * that regulator, so let's not use it for now. @@ -238,3 +471,27 @@ &sdhc1 { * vqmmc-supply = <&pm8994_s4>; */ }; + +&sdhc2 { + status = "okay"; + + cd-gpios = <&tlmm 100 0>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; +}; + +&tlmm { + ts_int_active: ts-int-active { + pins = "gpio42"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + ts_reset_active: ts-reset-active { + pins = "gpio109"; + drive-strength = <2>; + bias-disable; + output-low; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 6707f8986..f49d442d2 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -4,6 +4,7 @@ #include #include +#include / { interrupt-parent = <&intc>; @@ -131,11 +132,11 @@ core1 { cpu = <&CPU5>; }; - core2 { + cpu6_map: core2 { cpu = <&CPU6>; }; - core3 { + cpu7_map: core3 { cpu = <&CPU7>; }; }; @@ -154,6 +155,12 @@ memory { reg = <0 0 0 0>; }; + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x80>; + #hwlock-cells = <1>; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; @@ -169,8 +176,51 @@ reserved-memory { #size-cells = <2>; ranges; + dfps_data_mem: dfps_data_mem@3400000 { + reg = <0 0x03400000 0 0x1000>; + no-map; + }; + + cont_splash_mem: memory@3800000 { + reg = <0 0x03800000 0 0x2400000>; + no-map; + }; + smem_mem: smem_region@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; + reg = <0 0x06a00000 0 0x200000>; + no-map; + }; + + mpss_mem: memory@7000000 { + reg = <0 0x07000000 0 0x5a00000>; + no-map; + }; + + peripheral_region: memory@ca00000 { + reg = <0 0x0ca00000 0 0x1f00000>; + no-map; + }; + + rmtfs_mem: memory@c6400000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xc6400000 0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + mba_mem: memory@c6700000 { + reg = <0 0xc6700000 0 0x100000>; + no-map; + }; + + audio_mem: memory@c7000000 { + reg = <0 0xc7000000 0 0x800000>; + no-map; + }; + + adsp_mem: memory@c9400000 { + reg = <0 0xc9400000 0 0x3f00000>; no-map; }; }; @@ -192,6 +242,35 @@ rpmcc: rpmcc { compatible = "qcom,rpmcc-msm8994"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,msm8994-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; }; }; }; @@ -203,6 +282,55 @@ smem { hwlocks = <&tcsr_mutex 3>; }; + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = ; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; @@ -282,6 +410,37 @@ frame@f9028000 { }; }; + usb3: usb@f92f8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0xf92f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + power-domains = <&gcc USB30_GDSC>; + qcom,select-utmi-as-pipe-clk; + + dwc3@f9200000 { + compatible = "snps,dwc3"; + reg = <0xf9200000 0xcc00>; + interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + sdhc1: sdhci@f9824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; @@ -305,7 +464,30 @@ sdhc1: sdhci@f9824900 { status = "disabled"; }; - blsp1_dma: dma@f9904000 { + sdhc2: sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + cd-gpios = <&tlmm 100 0>; + bus-width = <4>; + status = "disabled"; + }; + + blsp1_dma: dma-controller@f9904000 { compatible = "qcom,bam-v1.7.0"; reg = <0xf9904000 0x19000>; interrupts = ; @@ -331,7 +513,7 @@ blsp1_uart2: serial@f991e000 { status = "disabled"; }; - blsp_i2c1: i2c@f9923000 { + blsp1_i2c1: i2c@f9923000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9923000 0x500>; interrupts = ; @@ -339,6 +521,8 @@ blsp_i2c1: i2c@f9923000 { <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; clock-names = "iface", "core"; clock-frequency = <400000>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_default>; pinctrl-1 = <&i2c1_sleep>; @@ -347,7 +531,7 @@ blsp_i2c1: i2c@f9923000 { status = "disabled"; }; - blsp_spi0: spi@f9923000 { + blsp1_spi1: spi@f9923000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0xf9923000 0x500>; interrupts = ; @@ -358,21 +542,21 @@ blsp_spi0: spi@f9923000 { dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_spi0_default>; - pinctrl-1 = <&blsp1_spi0_sleep>; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; - blsp_i2c2: i2c@f9924000 { + blsp1_i2c2: i2c@f9924000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9924000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; - clock-frequency = <355000>; + clock-frequency = <400000>; dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; @@ -385,14 +569,16 @@ blsp_i2c2: i2c@f9924000 { /* I2C3 doesn't exist */ - blsp_i2c4: i2c@f9926000 { + blsp1_i2c4: i2c@f9926000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9926000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; clock-names = "iface", "core"; - clock-frequency = <355000>; + clock-frequency = <400000>; + dmas = <&blsp1_dma 18>, <&blsp1_dma 19>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; pinctrl-1 = <&i2c4_sleep>; @@ -401,31 +587,32 @@ blsp_i2c4: i2c@f9926000 { status = "disabled"; }; - blsp2_dma: dma@f9944000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0xf9944000 0x19000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - qcom,controlled-remotely; - num-channels = <18>; - qcom,num-ees = <4>; + blsp1_i2c5: i2c@f9927000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9927000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - /* According to downstream kernels, i2c6 - * comes before i2c5 address-wise... - */ - - blsp_i2c6: i2c@f9928000 { + blsp1_i2c6: i2c@f9928000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9928000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; clock-names = "iface", "core"; - clock-frequency = <355000>; + clock-frequency = <400000>; dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; @@ -436,10 +623,23 @@ blsp_i2c6: i2c@f9928000 { status = "disabled"; }; + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0xf9944000 0x19000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; - interrupts = ; + interrupts = ; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; @@ -451,7 +651,43 @@ blsp2_uart2: serial@f995e000 { status = "disabled"; }; - blsp_i2c5: i2c@f9967000 { + blsp2_i2c1: i2c@f9963000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9963000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi4: spi@f9966000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0xf9966000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + spi-max-frequency = <19200000>; + dmas = <&blsp2_dma 18>, <&blsp2_dma 19>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_spi10_default>; + pinctrl-1 = <&blsp2_spi10_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c5: i2c@f9967000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9967000 0x500>; interrupts = ; @@ -462,8 +698,8 @@ blsp_i2c5: i2c@f9967000 { dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_default>; - pinctrl-1 = <&i2c5_sleep>; + pinctrl-0 = <&i2c11_default>; + pinctrl-1 = <&i2c11_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -534,16 +770,18 @@ blsp1_uart2_sleep: blsp1-uart2-sleep { blsp2_uart2_default: blsp2-uart2-default { function = "blsp_uart8"; - pins = "gpio45", "gpio46"; - drive-strength = <2>; + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + drive-strength = <16>; bias-disable; }; blsp2_uart2_sleep: blsp2-uart2-sleep { function = "gpio"; - pins = "gpio45", "gpio46"; + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; i2c1_default: i2c1-default { @@ -617,7 +855,56 @@ i2c6_sleep: i2c6-sleep { bias-disable; }; - blsp1_spi0_default: blsp1-spi0-default { + i2c7_default: i2c7-default { + function = "blsp_i2c7"; + pins = "gpio44", "gpio43"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep { + function = "gpio"; + pins = "gpio44", "gpio43"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_spi10_default: blsp2-spi10-default { + default { + function = "blsp_spi10"; + pins = "gpio53", "gpio54", "gpio55"; + drive-strength = <10>; + bias-pull-down; + }; + cs { + function = "gpio"; + pins = "gpio55"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp2_spi10_sleep: blsp2-spi10-sleep { + pins = "gpio53", "gpio54", "gpio55"; + drive-strength = <2>; + bias-disable; + }; + + i2c11_default: i2c11-default { + function = "blsp_i2c11"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + i2c11_sleep: i2c11-sleep { + function = "gpio"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_spi1_default: blsp1-spi1-default { default { function = "blsp_spi1"; pins = "gpio0", "gpio1", "gpio3"; @@ -632,7 +919,7 @@ cs { }; }; - blsp1_spi0_sleep: blsp1-spi0-sleep { + blsp1_spi1_sleep: blsp1-spi1-sleep { pins = "gpio0", "gpio1", "gpio3"; drive-strength = <2>; bias-disable; @@ -683,16 +970,46 @@ sdc1_rclk_off: rclk-off { pins = "sdc1_rclk"; bias-pull-down; }; - }; - }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; - #hwlock-cells = <1>; + sdc2_clk_on: sdc2-clk-on { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <10>; + }; + + sdc2_clk_off: sdc2-clk-off { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc2_cmd_on: sdc2-cmd-on { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_cmd_off: sdc2-cmd-off { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_data_on: sdc2-data-on { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_data_off: sdc2-data-off { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; }; - timer { + timer: timer { compatible = "arm,armv8-timer"; interrupts = , , @@ -700,9 +1017,9 @@ timer { ; }; - vreg_vph_pwr: vreg-vph-pwr { + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; - regulator-name = "vph-pwr"; + regulator-name = "vph_pwr"; regulator-min-microvolt = <3600000>; regulator-max-microvolt = <3600000>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index fd6ae5464..ce430ba9c 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -750,6 +750,8 @@ pcie0: pcie@600000 { ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + device_type = "pci"; + interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -802,6 +804,8 @@ pcie1: pcie@608000 { ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + device_type = "pci"; + interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -1990,7 +1994,7 @@ dwc3@7600000 { }; }; - slimbam: dma@9184000 { + slimbam: dma-controller@9184000 { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0x09184000 0x32000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 00d84fb21..b500f24d4 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -74,6 +74,14 @@ &CPU7 { cpu-idle-states = <&BIG_CPU_SLEEP_1>; }; +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pm8005_lsid1 { pm8005-regulators { compatible = "qcom,pm8005-regulators"; @@ -295,6 +303,14 @@ &sdhc2 { pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; +&ufshc { + status = "okay"; +}; + +&ufsphy { + status = "okay"; +}; + &usb3 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index cec42437b..c1ef0c71d 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -106,6 +106,14 @@ &funnel5 { // status = "okay"; }; +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pm8005_lsid1 { pm8005-regulators { compatible = "qcom,pm8005-regulators"; @@ -345,6 +353,7 @@ &stm { }; &ufshc { + status = "okay"; vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; @@ -354,6 +363,7 @@ &ufshc { }; &ufsphy { + status = "okay"; vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; vddp-ref-clk-supply = <&vreg_l26a_1p2>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi deleted file mode 100644 index 7c222cbf1..000000000 --- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi +++ /dev/null @@ -1,108 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */ - -&tlmm { - sdc2_clk_on: sdc2_clk_on { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <16>; /* 16 mA */ - }; - }; - - sdc2_clk_off: sdc2_clk_off { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_cmd_on: sdc2_cmd_on { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <10>; /* 10 mA */ - }; - }; - - sdc2_cmd_off: sdc2_cmd_off { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_data_on: sdc2_data_on { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <10>; /* 10 mA */ - }; - }; - - sdc2_data_off: sdc2_data_off { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio95"; - function = "gpio"; - }; - - config { - pins = "gpio95"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio95"; - function = "gpio"; - }; - - config { - pins = "gpio95"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - blsp1_uart3_on: blsp1_uart3_on { - tx { - pins = "gpio45"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio46"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - - cts { - pins = "gpio47"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - - rfr { - pins = "gpio48"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index c45870600..1f2e93aa6 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -133,6 +133,7 @@ CPU0: cpu@0 { compatible = "qcom,kryo280"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L2_0: l2-cache { @@ -152,6 +153,7 @@ CPU1: cpu@1 { compatible = "qcom,kryo280"; reg = <0x0 0x1>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_1: l1-icache { @@ -167,6 +169,7 @@ CPU2: cpu@2 { compatible = "qcom,kryo280"; reg = <0x0 0x2>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_2: l1-icache { @@ -182,6 +185,7 @@ CPU3: cpu@3 { compatible = "qcom,kryo280"; reg = <0x0 0x3>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_3: l1-icache { @@ -197,6 +201,7 @@ CPU4: cpu@100 { compatible = "qcom,kryo280"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L2_1: l2-cache { @@ -216,6 +221,7 @@ CPU5: cpu@101 { compatible = "qcom,kryo280"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_101: l1-icache { @@ -231,6 +237,7 @@ CPU6: cpu@102 { compatible = "qcom,kryo280"; reg = <0x0 0x102>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_102: l1-icache { @@ -246,6 +253,7 @@ CPU7: cpu@103 { compatible = "qcom,kryo280"; reg = <0x0 0x103>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_103: l1-icache { @@ -379,43 +387,43 @@ rpmpd_opp_table: opp-table { compatible = "operating-points-v2"; rpmpd_opp_ret: opp1 { - opp-level = <16>; + opp-level = ; }; rpmpd_opp_ret_plus: opp2 { - opp-level = <32>; + opp-level = ; }; rpmpd_opp_min_svs: opp3 { - opp-level = <48>; + opp-level = ; }; rpmpd_opp_low_svs: opp4 { - opp-level = <64>; + opp-level = ; }; rpmpd_opp_svs: opp5 { - opp-level = <128>; + opp-level = ; }; rpmpd_opp_svs_plus: opp6 { - opp-level = <192>; + opp-level = ; }; rpmpd_opp_nom: opp7 { - opp-level = <256>; + opp-level = ; }; rpmpd_opp_nom_plus: opp8 { - opp-level = <320>; + opp-level = ; }; rpmpd_opp_turbo: opp9 { - opp-level = <384>; + opp-level = ; }; rpmpd_opp_turbo_plus: opp10 { - opp-level = <512>; + opp-level = ; }; }; }; @@ -937,6 +945,7 @@ pcie0: pci@1c00000 { num-lanes = <1>; phys = <&pciephy>; phy-names = "pciephy"; + status = "disabled"; ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; @@ -962,11 +971,12 @@ pcie0: pci@1c00000 { perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; }; - phy@1c06000 { + pcie_phy: phy@1c06000 { compatible = "qcom,msm8998-qmp-pcie-phy"; reg = <0x01c06000 0x18c>; #address-cells = <1>; #size-cells = <1>; + status = "disabled"; ranges; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, @@ -999,6 +1009,7 @@ ufshc: ufshc@1da4000 { phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_GDSC>; + status = "disabled"; #reset-cells = <1>; clock-names = @@ -1038,6 +1049,7 @@ ufsphy: phy@1da7000 { reg = <0x01da7000 0x18c>; #address-cells = <1>; #size-cells = <1>; + status = "disabled"; ranges; clock-names = @@ -1073,6 +1085,278 @@ tlmm: pinctrl@3400000 { #gpio-cells = <0x2>; interrupt-controller; #interrupt-cells = <0x2>; + + sdc2_clk_on: sdc2_clk_on { + config { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + }; + + sdc2_clk_off: sdc2_clk_off { + config { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + }; + + sdc2_cmd_on: sdc2_cmd_on { + config { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_cmd_off: sdc2_cmd_off { + config { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_data_on: sdc2_data_on { + config { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_data_off: sdc2_data_off { + config { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio95"; + function = "gpio"; + }; + + config { + pins = "gpio95"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio95"; + function = "gpio"; + }; + + config { + pins = "gpio95"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + blsp1_uart3_on: blsp1_uart3_on { + tx { + pins = "gpio45"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio46"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + cts { + pins = "gpio47"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rfr { + pins = "gpio48"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + pins = "gpio32", "gpio33"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep { + pins = "gpio32", "gpio33"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c4_default: blsp1-i2c4-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_sleep: blsp1-i2c4-sleep { + pins = "gpio10", "gpio11"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c5_default: blsp1-i2c5-default { + pins = "gpio87", "gpio88"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c5_sleep: blsp1-i2c5-sleep { + pins = "gpio87", "gpio88"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c6_default: blsp1-i2c6-default { + pins = "gpio43", "gpio44"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep { + pins = "gpio43", "gpio44"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + blsp2_i2c1_default: blsp2-i2c1-default { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c1_sleep: blsp2-i2c1-sleep { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c2_default: blsp2-i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c3_default: blsp2-i2c3-default { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c3_sleep: blsp2-i2c3-sleep { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c4_default: blsp2-i2c4-default { + pins = "gpio67", "gpio68"; + function = "blsp_i2c10"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c4_sleep: blsp2-i2c4-sleep { + pins = "gpio67", "gpio68"; + function = "blsp_i2c10"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c5_default: blsp2-i2c5-default { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c6_default: blsp2-i2c6-default { + pins = "gpio83", "gpio84"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep { + pins = "gpio83", "gpio84"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-pull-up; + }; }; remoteproc_mss: remoteproc@4080000 { @@ -1754,7 +2038,7 @@ sdhc2: sdhci@c0a4900 { status = "disabled"; }; - blsp1_dma: dma@c144000 { + blsp1_dma: dma-controller@c144000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c144000 0x25000>; interrupts = ; @@ -1789,6 +2073,11 @@ blsp1_i2c1: i2c@c175000 { clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1804,6 +2093,11 @@ blsp1_i2c2: i2c@c176000 { clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1819,6 +2113,11 @@ blsp1_i2c3: i2c@c177000 { clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1834,6 +2133,11 @@ blsp1_i2c4: i2c@c178000 { clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c4_default>; + pinctrl-1 = <&blsp1_i2c4_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1849,6 +2153,11 @@ blsp1_i2c5: i2c@c179000 { clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c5_default>; + pinctrl-1 = <&blsp1_i2c5_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1864,6 +2173,11 @@ blsp1_i2c6: i2c@c17a000 { clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1871,6 +2185,19 @@ blsp1_i2c6: i2c@c17a000 { #size-cells = <0>; }; + blsp2_dma: dma@c184000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c184000 0x25000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + blsp2_uart1: serial@c1b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x0c1b0000 0x1000>; @@ -1881,7 +2208,7 @@ blsp2_uart1: serial@c1b0000 { status = "disabled"; }; - blsp2_i2c0: i2c@c1b5000 { + blsp2_i2c1: i2c@c1b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b5000 0x600>; interrupts = ; @@ -1889,6 +2216,11 @@ blsp2_i2c0: i2c@c1b5000 { clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1896,7 +2228,7 @@ blsp2_i2c0: i2c@c1b5000 { #size-cells = <0>; }; - blsp2_i2c1: i2c@c1b6000 { + blsp2_i2c2: i2c@c1b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b6000 0x600>; interrupts = ; @@ -1904,6 +2236,11 @@ blsp2_i2c1: i2c@c1b6000 { clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1911,7 +2248,7 @@ blsp2_i2c1: i2c@c1b6000 { #size-cells = <0>; }; - blsp2_i2c2: i2c@c1b7000 { + blsp2_i2c3: i2c@c1b7000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b7000 0x600>; interrupts = ; @@ -1919,6 +2256,11 @@ blsp2_i2c2: i2c@c1b7000 { clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c3_default>; + pinctrl-1 = <&blsp2_i2c3_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1926,7 +2268,7 @@ blsp2_i2c2: i2c@c1b7000 { #size-cells = <0>; }; - blsp2_i2c3: i2c@c1b8000 { + blsp2_i2c4: i2c@c1b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b8000 0x600>; interrupts = ; @@ -1934,6 +2276,11 @@ blsp2_i2c3: i2c@c1b8000 { clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c4_default>; + pinctrl-1 = <&blsp2_i2c4_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1941,7 +2288,7 @@ blsp2_i2c3: i2c@c1b8000 { #size-cells = <0>; }; - blsp2_i2c4: i2c@c1b9000 { + blsp2_i2c5: i2c@c1b9000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b9000 0x600>; interrupts = ; @@ -1949,6 +2296,11 @@ blsp2_i2c4: i2c@c1b9000 { clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1956,7 +2308,7 @@ blsp2_i2c4: i2c@c1b9000 { #size-cells = <0>; }; - blsp2_i2c5: i2c@c1ba000 { + blsp2_i2c6: i2c@c1ba000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1ba000 0x600>; interrupts = ; @@ -1964,6 +2316,11 @@ blsp2_i2c5: i2c@c1ba000 { clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -2110,5 +2467,3 @@ wifi: wifi@18800000 { }; }; }; - -#include "msm8998-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 57af0b4a3..8ab4f1f78 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -52,6 +52,16 @@ adc-chan@6 { }; }; + pm6150_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm6150_gpio: gpios@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index f84027b50..b49860cd1 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -11,6 +11,30 @@ pm6150l_lsid4: pmic@4 { #address-cells = <1>; #size-cells = <0>; + pm6150l_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@6 { + reg = ; + label = "die_temp"; + }; + }; + + pm6150l_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm6150l_gpio: gpios@c000 { compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index 1b6406927..bdc76d504 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm8150 { + pm8150-thermal { polling-delay-passive = <100>; polling-delay = <0>; @@ -97,7 +97,17 @@ die-temp@6 { }; }; - rtc@6000 { + pm8150_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pm8150_rtc: rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; reg-names = "rtc", "alarm"; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index e112e8876..b21e56a46 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -10,7 +10,7 @@ / { thermal-zones { - pm8150b { + pm8150b-thermal { polling-delay-passive = <100>; polling-delay = <0>; @@ -95,6 +95,16 @@ chg-temp@9 { }; }; + pm8150b_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150b_gpios: gpio@c000 { compatible = "qcom,pm8150b-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index 62139538b..52f094a2b 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -10,7 +10,7 @@ / { thermal-zones { - pm8150l { + pm8150l-thermal { polling-delay-passive = <100>; polling-delay = <0>; @@ -89,6 +89,16 @@ die-temp@6 { }; }; + pm8150l_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150l_gpios: gpio@c000 { compatible = "qcom,pm8150l-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 7e4f77774..c3876c82c 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -1,7 +1,32 @@ // SPDX-License-Identifier: GPL-2.0 +#include +#include #include #include -#include + +/ { + thermal-zones { + pm8994-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8994_temp>; + + trips { + pm8994_alert0: pm8994-alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8994_crit: pm8994-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { @@ -18,7 +43,7 @@ rtc@6000 { interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pon@800 { + pm8994_pon: pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x800>; @@ -35,33 +60,56 @@ pwrkey { }; + pm8994_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8994_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8994_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@7 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + adc-chan@8 { + reg = ; + label = "die_temp"; + }; + adc-chan@9 { + reg = ; + label = "ref_625mv"; + }; + adc-chan@a { + reg = ; + label = "ref_1250mv"; + }; + adc-chan@e { + reg = ; + }; + adc-chan@f { + reg = ; + }; + }; + pm8994_gpios: gpios@c000 { - compatible = "qcom,pm8994-gpio"; + compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8994_gpios 0 0 22>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; pm8994_mpps: mpps@a000 { diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 67283d60e..6f5bb6b37 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -9,7 +9,7 @@ / { thermal-zones { - pm8998 { + pm8998-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index d016b1296..d230c510d 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -30,11 +30,15 @@ labibb { compatible = "qcom,pmi8998-lab-ibb"; ibb: ibb { - interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>; + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, + <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sc-err", "ocp"; }; lab: lab { - interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index ff4005186..172be177f 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -8,7 +8,7 @@ / { thermal-zones { - pms405 { + pms405-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index b654b802e..339790ba5 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -801,7 +801,7 @@ sdcc1: sdcc@7804000 { status = "disabled"; }; - blsp1_dma: dma@7884000 { + blsp1_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x25000>; interrupts = ; @@ -1045,7 +1045,7 @@ blsp1_spi4: spi@78b9000 { status = "disabled"; }; - blsp2_dma: dma@7ac4000 { + blsp2_dma: dma-controller@7ac4000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07ac4000 0x17000>; interrupts = ; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 949fee694..2f0528d01 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -7,6 +7,8 @@ #include #include +#include +#include #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -18,12 +20,20 @@ / { aliases { serial0 = &uart12; + sdhc2 = &sdhc_2; }; chosen { stdout-path = "serial0:115200n8"; }; + /* Fixed crystal oscillator dedicated to MCP2518FD */ + clk40M: can_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + dc12v: dc12v-regulator { compatible = "regulator-fixed"; regulator-name = "DC12V"; @@ -32,6 +42,17 @@ dc12v: dc12v-regulator { regulator-always-on; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -58,6 +79,98 @@ bt { }; + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + lt9611_3v3: lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + thermal-zones { + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + pm8150l-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + skin-msm-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + wifi-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 1>; + + trips { + active-config0 { + temperature = <52000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 0>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + }; + vbat: vbat-regulator { compatible = "regulator-fixed"; regulator-name = "VBAT"; @@ -79,7 +192,7 @@ vbat_som: vbat-som-regulator { vdc_3v3: vdc-3v3-regulator { compatible = "regulator-fixed"; regulator-name = "VDC_3V3"; - vin-supply = <&dc12v>; + vin-supply = <&vreg_l11c_3p3>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -112,6 +225,11 @@ vreg_s4a_1p8: vreg-s4a-1p8 { }; }; +&adsp { + status = "okay"; + firmware-name = "qcom/sm8250/adsp.mbn"; +}; + &apps_rsc { pm8009-rpmh-regulators { compatible = "qcom,pm8009-1-rpmh-regulators"; @@ -405,6 +523,42 @@ vreg_s8c_1p3: smps8 { }; }; +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8250/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l9a_1p2>; + +#if 0 + qcom,dual-dsi-mode; + qcom,master-dsi; +#endif + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l5a_0p88>; +}; + +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/a650_zap.mbn"; + }; +}; + /* LS-I2C0 */ &i2c4 { status = "okay"; @@ -412,6 +566,55 @@ &i2c4 { &i2c5 { status = "okay"; + clock-frequency = <400000>; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + +#if 0 + port@1 { + reg = <1>; + + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; +#endif + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + + }; + }; }; /* LS-I2C1 */ @@ -419,6 +622,88 @@ &i2c15 { status = "okay"; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pm8150_adc { + xo-therm@4c { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + wifi-therm@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + wifi-therm@1 { + reg = <1>; + io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pcie2 { + status = "okay"; + perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_default_state>; +}; + +&pcie2_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + &pm8150_gpios { gpio-reserved-ranges = <1 1>, <3 2>, <7 1>; gpio-line-names = @@ -434,6 +719,25 @@ &pm8150_gpios { "GPIO_10_P"; /* Green LED */ }; +&pm8150b_adc { + conn-therm@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc_tm { + status = "okay"; + + conn-therm@0 { + reg = <0>; + io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm8150b_gpios { gpio-line-names = "NC", @@ -450,6 +754,38 @@ &pm8150b_gpios { "NC"; }; +&pm8150l_adc { + skin-msm-therm@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pm8150l-therm@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150l_adc_tm { + status = "okay"; + + skin-msm-therm@0 { + reg = <0>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8150l-therm@1 { + reg = <1>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm8150l_gpios { gpio-line-names = "NC", @@ -464,6 +800,19 @@ &pm8150l_gpios { "PM_GPIO-B", "NC", "PM3003A_MODE"; + + lt9611_rst_pin: lt9611-rst-pin { + pins = "gpio5"; + function = "normal"; + + output-high; + input-disable; + power-source = <0>; + }; +}; + +&pm8150_rtc { + status = "okay"; }; &qupv3_id_0 { @@ -478,9 +827,161 @@ &qupv3_id_2 { status = "okay"; }; +&q6afedai { + qi2s@16 { + reg = <16>; + qcom,sd-lines = <0 1 2 3>; + }; +}; + +/* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */ +&q6afedai { + qi2s@20 { + reg = <20>; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sdhc_2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&sound { + compatible = "qcom,qrb5165-rb5-sndcard"; + pinctrl-0 = <&tert_mi2s_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + + dma-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; +}; + /* CAN */ &spi0 { status = "okay"; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + clocks = <&clk40M>; + interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + +&swr0 { + left_spkr: wsa8810-left{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; }; &tlmm { @@ -666,6 +1167,113 @@ &tlmm { "HST_BLE_SNS_UART_RX", "HST_WLAN_UART_TX", "HST_WLAN_UART_RX"; + + lt9611_irq_pin: lt9611-irq { + pins = "gpio63"; + function = "gpio"; + bias-disable; + }; + + pcie0_default_state: pcie0-default { + clkreq { + pins = "gpio80"; + function = "pci_e0"; + bias-pull-up; + }; + + reset-n { + pins = "gpio79"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio81"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default { + clkreq { + pins = "gpio83"; + function = "pci_e1"; + bias-pull-up; + }; + + reset-n { + pins = "gpio82"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio84"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie2_default_state: pcie2-default { + clkreq { + pins = "gpio86"; + function = "pci_e2"; + bias-pull-up; + }; + + reset-n { + pins = "gpio85"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio87"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio77"; + function = "gpio"; + bias-pull-up; + }; }; &uart12 { @@ -691,3 +1299,56 @@ &ufs_mem_phy { vdda-pll-supply = <&vreg_l9a_1p2>; vdda-pll-max-microamp = <18800>; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&vamacro { + pinctrl-0 = <&dmic01_active>; + pinctrl-names = "default"; + vdd-micb-supply = <&vreg_s4a_1p8>; + qcom,dmic-sample-rate = <600000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi new file mode 100644 index 000000000..d8ed1d7b4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SC7180 lite device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +&cpu6_opp10 { + opp-peak-kBps = <7216000 22425600>; +}; + +&cpu6_opp11 { + opp-peak-kBps = <7216000 22425600>; +}; + +&cpu6_opp12 { + opp-peak-kBps = <8532000 23347200>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts index ae4c23a4f..30e3e769d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -14,6 +14,17 @@ / { compatible = "google,lazor-rev0", "qcom,sc7180"; }; +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; +}; + &sn65dsi86_out { /* * Lane 0 was incorrectly mapped on the cable, but we've now decided diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts index c3f426c3c..919bfaea6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts @@ -8,8 +8,8 @@ #include "sc7180-trogdor-lazor-r1.dts" / { - model = "Google Lazor (rev1+) with KB Backlight"; - compatible = "google,lazor-sku2", "qcom,sc7180"; + model = "Google Lazor (rev1 - 2) with KB Backlight"; + compatible = "google,lazor-rev1-sku2", "google,lazor-rev2-sku2", "qcom,sc7180"; }; &keyboard_backlight { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts index 73e59cf77..e16ba7b01 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -9,8 +9,16 @@ #include "sc7180-trogdor-lte-sku.dtsi" / { - model = "Google Lazor (rev1+) with LTE"; - compatible = "google,lazor-sku0", "qcom,sc7180"; + model = "Google Lazor (rev1 - 2) with LTE"; + compatible = "google,lazor-rev1-sku0", "google,lazor-rev2-sku0", "qcom,sc7180"; +}; + +&ap_sar_sensor { + status = "okay"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; }; &keyboard_backlight { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index 3151ae31c..c2ef06367 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -10,6 +10,17 @@ #include "sc7180-trogdor-lazor.dtsi" / { - model = "Google Lazor (rev1+)"; - compatible = "google,lazor", "qcom,sc7180"; + model = "Google Lazor (rev1 - 2)"; + compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180"; +}; + +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts new file mode 100644 index 000000000..6985beb97 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-r3.dts" + +/ { + model = "Google Lazor (rev3+) with KB Backlight"; + compatible = "google,lazor-sku2", "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts new file mode 100644 index 000000000..0881f8dd0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-r3.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor (rev3+) with LTE"; + compatible = "google,lazor-sku0", "qcom,sc7180"; +}; + +&ap_sar_sensor { + status = "okay"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts new file mode 100644 index 000000000..1b9d2f463 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" + +/ { + model = "Google Lazor (rev3+)"; + compatible = "google,lazor", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 180ef9e04..89e5cd29e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -30,7 +30,12 @@ panel_in_edp: endpoint { }; &ap_sar_sensor { - status = "okay"; + semtech,cs0-ground; + semtech,combined-sensors = <3>; + semtech,resolution = "fine"; + semtech,startup-sensor = <0>; + semtech,proxraw-strength = <8>; + semtech,avg-pos-strength = <64>; }; ap_ts_pen_1v8: &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi index 44956e316..469aad4e5 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -9,6 +9,10 @@ &ap_sar_sensor { label = "proximity-wifi-lte"; }; +&mpss_mem { + reg = <0x0 0x86000000 0x0 0x8c00000>; +}; + &remoteproc_mpss { firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn", "qcom/sc7180-trogdor/modem/qdsp6sw.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 0a281c248..2cb522d69 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -34,11 +34,6 @@ panel_in_edp: endpoint { }; }; -&ap_sar_sensor_i2c { - /* Not hooked up */ - status = "disabled"; -}; - ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; @@ -58,6 +53,17 @@ ap_ts: touchscreen@10 { }; }; +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; +}; + &sdhc_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index bf875589d..07c8b2c92 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -13,6 +13,23 @@ #include "pm6150.dtsi" #include "pm6150l.dtsi" +/ { + thermal-zones { + charger-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + + trips { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; +}; + /* * Reserved memory changes * @@ -39,7 +56,7 @@ atf_mem: memory@80b00000 { }; mpss_mem: memory@86000000 { - reg = <0x0 0x86000000 0x0 0x8c00000>; + reg = <0x0 0x86000000 0x0 0x2000000>; no-map; }; @@ -174,11 +191,38 @@ pp3300_fp_tp: pp3300-fp-tp-regulator { vin-supply = <&pp3300_a>; }; + pp3300_hub: pp3300-hub { + compatible = "regulator-fixed"; + regulator-name = "pp3300_hub"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_hub>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_a>; + }; + /* BOARD-SPECIFIC TOP LEVEL NODES */ backlight: backlight { compatible = "pwm-backlight"; + /* The panels don't seem to like anything below ~ 5% */ + brightness-levels = < + 196 256 324 400 484 576 676 784 900 1024 1156 1296 + 1444 1600 1764 1936 2116 2304 2500 2704 2916 3136 + 3364 3600 3844 4096 + >; + num-interpolated-steps = <64>; + default-brightness-level = <951>; + pwms = <&cros_ec_pwm 1>; enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; power-supply = <&ppvar_sys>; @@ -192,7 +236,7 @@ gpio_keys: gpio-keys { pinctrl-names = "default"; pinctrl-0 = <&pen_pdct_l>; - pen-insert { + pen_insert: pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ @@ -254,40 +298,6 @@ pp1125_s1a: smps1 { regulator-max-microvolt = <1128000>; }; - /* - * pp2040_s5a (smps5) and pp1056_s4a (smps4) are just - * inputs to other rails on AOP-managed PMICs on trogdor. - * The system is already configured to manage these rails - * automatically (enable when needed, adjust voltage for - * headroom) so we won't specify anything here. - * - * NOTE: though the rails have a voltage implied by their - * name, the automatic headroom calculation might not result - * in them being that voltage. ...and that's OK. - * Specifically the only point of these rails is to provide - * an input source for other rails and if we can satisify the - * needs of those other rails with a lower source voltage then - * we save power. - */ - - pp1200_l1a: ldo1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - pp1000_l2a: ldo2 { - regulator-min-microvolt = <944000>; - regulator-max-microvolt = <1056000>; - regulator-initial-mode = ; - }; - - pp1000_l3a: ldo3 { - regulator-min-microvolt = <968000>; - regulator-max-microvolt = <1064000>; - regulator-initial-mode = ; - }; - vdd_qlink_lv: vdd_qlink_lv_ck: vdd_qusb_hs0_core: @@ -306,24 +316,6 @@ pp900_l4a: ldo4 { regulator-initial-mode = ; }; - pp2700_l5a: ldo5 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - regulator-initial-mode = ; - }; - - ebi0_cal: - ebi1_cal: - vddio_ck_ebi0: - vddio_ck_ebi1: - vddio_ebi0: - vddq: - pp600_l6a: ldo6 { - regulator-min-microvolt = <568000>; - regulator-max-microvolt = <648000>; - regulator-initial-mode = ; - }; - vdd_cx_wlan: pp800_l9a: ldo9 { regulator-min-microvolt = <488000>; @@ -360,6 +352,11 @@ pp1800_l12a_r: ldo12 { regulator-initial-mode = ; }; + /* + * On trogdor this needs to match l10a since we use it to + * give power to things like SPI flash which communicate back + * on lines powered by l10a. Thus we force to 1.8V. + */ pp1800_l13a: ldo13 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -380,12 +377,6 @@ pp1800_l15a: ldo15 { regulator-initial-mode = ; }; - pp2700_l16a: ldo16 { - regulator-min-microvolt = <2496000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = ; - }; - vdda_qusb_hs0_3p1: vdd_pdphy: pp3100_l17a: ldo17 { @@ -419,8 +410,8 @@ pp1300_s8c: smps8 { }; pp1800_l1c: ldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; regulator-initial-mode = ; }; @@ -447,35 +438,17 @@ pp1200_l3c: ldo3 { regulator-initial-mode = ; }; - ld_pp1800_esim_l4c: - vddpx_5: - pp1800_l4c: ldo4 { - regulator-min-microvolt = <1648000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = ; - }; - - vddpx_6: - pp1800_l5c: ldo5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - vddpx_2: ppvar_l6c: ldo6 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3304000>; + regulator-max-microvolt = <2952000>; regulator-initial-mode = ; }; - pp3300_hub: pp3300_l7c: ldo7 { regulator-min-microvolt = <3304000>; regulator-max-microvolt = <3304000>; regulator-initial-mode = ; - regulator-always-on; - regulator-boot-on; }; pp1800_brij_vccio: @@ -645,7 +618,6 @@ sn65dsi86_out: endpoint { }; ap_sar_sensor_i2c: &i2c5 { - status = "okay"; clock-frequency = <400000>; ap_sar_sensor: proximity@28 { @@ -733,6 +705,25 @@ &mdss { status = "okay"; }; +&pm6150_adc { + charger-thermistor@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + charger-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm6150_pwrkey { status = "disabled"; }; @@ -776,7 +767,20 @@ &sdhc_2 { cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; }; +&spi0 { + pinctrl-0 = <&qup_spi0_cs_gpio>; + cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; +}; + +&spi6 { + pinctrl-0 = <&qup_spi6_cs_gpio>; + cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; +}; + ap_spi_fp: &spi10 { + pinctrl-0 = <&qup_spi10_cs_gpio>; + cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + cros_ec_fp: ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; @@ -864,6 +868,13 @@ wifi-firmware { /* PINCTRL - additions to nodes defined in sc7180.dtsi */ +&dp_hot_plug_det { + pinconf { + pins = "gpio117"; + bias-disable; + }; +}; + &qspi_cs0 { pinconf { pins = "gpio68"; @@ -937,7 +948,7 @@ pinconf { }; }; -&qup_spi0_default { +&qup_spi0_cs_gpio { pinconf { pins = "gpio34", "gpio35", "gpio36", "gpio37"; drive-strength = <2>; @@ -945,7 +956,7 @@ pinconf { }; }; -&qup_spi6_default { +&qup_spi6_cs_gpio { pinconf { pins = "gpio59", "gpio60", "gpio61", "gpio62"; drive-strength = <2>; @@ -953,7 +964,7 @@ pinconf { }; }; -&qup_spi10_default { +&qup_spi10_cs_gpio { pinconf { pins = "gpio86", "gpio87", "gpio88", "gpio89"; drive-strength = <2>; @@ -1164,6 +1175,19 @@ pinconf { }; }; + en_pp3300_hub: en-pp3300-hub { + pinmux { + pins = "gpio84"; + function = "gpio"; + }; + + pinconf { + pins = "gpio84"; + drive-strength = <2>; + bias-disable; + }; + }; + fpmcu_boot0: fpmcu-boot0 { pinmux { pins = "gpio10"; @@ -1310,7 +1334,8 @@ pinmux { pinconf { pins = "gpio24"; - bias-pull-up; + /* Has external pullup */ + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index c71f3afc1..1ea3344ab 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2,7 +2,7 @@ /* * SC7180 SoC device tree source * - * Copyright (c) 2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. */ #include @@ -31,6 +31,8 @@ / { chosen { }; aliases { + mmc1 = &sdhc_1; + mmc2 = &sdhc_2; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -525,6 +527,11 @@ cpu6_opp15: opp-2400000000 { opp-hz = /bits/ 64 <2400000000>; opp-peak-kBps = <8532000 23347200>; }; + + cpu6_opp16: opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <8532000 23347200>; + }; }; memory@80000000 { @@ -660,7 +667,7 @@ gcc: clock-controller@100000 { }; qfprom: efuse@784000 { - compatible = "qcom,qfprom"; + compatible = "qcom,sc7180-qfprom", "qcom,qfprom"; reg = <0 0x00784000 0 0x8ff>, <0 0x00780000 0 0x7a0>, <0 0x00782000 0 0x100>, @@ -675,6 +682,11 @@ qusb2p_hstx_trim: hstx-trim-primary@25b { reg = <0x25b 0x1>; bits = <1 3>; }; + + gpu_speed_bin: gpu_speed_bin@1d2 { + reg = <0x1d2 0x2>; + bits = <5 8>; + }; }; sdhc_1: sdhci@7c4000 { @@ -1403,8 +1415,8 @@ ipa: ipa@1e40000 { "ipa-shared", "gsi"; - interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>, - <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ipa", @@ -1427,8 +1439,6 @@ ipa: ipa@1e40000 { qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; - modem-remoteproc = <&remoteproc_mpss>; - status = "disabled"; }; @@ -1461,12 +1471,6 @@ pinmux { pins = "gpio117"; function = "dp_hot"; }; - - pinconf { - pins = "gpio117"; - bias-disable; - input-enable; - }; }; qspi_clk: qspi-clk { @@ -1596,6 +1600,19 @@ pinmux { }; }; + qup_spi0_cs_gpio: qup-spi0-cs-gpio { + pinmux { + pins = "gpio34", "gpio35", + "gpio36"; + function = "qup00"; + }; + + pinmux-cs { + pins = "gpio37"; + function = "gpio"; + }; + }; + qup_spi1_default: qup-spi1-default { pinmux { pins = "gpio0", "gpio1", @@ -1604,6 +1621,19 @@ pinmux { }; }; + qup_spi1_cs_gpio: qup-spi1-cs-gpio { + pinmux { + pins = "gpio0", "gpio1", + "gpio2"; + function = "qup01"; + }; + + pinmux-cs { + pins = "gpio3"; + function = "gpio"; + }; + }; + qup_spi3_default: qup-spi3-default { pinmux { pins = "gpio38", "gpio39", @@ -1612,6 +1642,19 @@ pinmux { }; }; + qup_spi3_cs_gpio: qup-spi3-cs-gpio { + pinmux { + pins = "gpio38", "gpio39", + "gpio40"; + function = "qup03"; + }; + + pinmux-cs { + pins = "gpio41"; + function = "gpio"; + }; + }; + qup_spi5_default: qup-spi5-default { pinmux { pins = "gpio25", "gpio26", @@ -1620,6 +1663,19 @@ pinmux { }; }; + qup_spi5_cs_gpio: qup-spi5-cs-gpio { + pinmux { + pins = "gpio25", "gpio26", + "gpio27"; + function = "qup05"; + }; + + pinmux-cs { + pins = "gpio28"; + function = "gpio"; + }; + }; + qup_spi6_default: qup-spi6-default { pinmux { pins = "gpio59", "gpio60", @@ -1628,6 +1684,19 @@ pinmux { }; }; + qup_spi6_cs_gpio: qup-spi6-cs-gpio { + pinmux { + pins = "gpio59", "gpio60", + "gpio61"; + function = "qup10"; + }; + + pinmux-cs { + pins = "gpio62"; + function = "gpio"; + }; + }; + qup_spi8_default: qup-spi8-default { pinmux { pins = "gpio42", "gpio43", @@ -1636,6 +1705,19 @@ pinmux { }; }; + qup_spi8_cs_gpio: qup-spi8-cs-gpio { + pinmux { + pins = "gpio42", "gpio43", + "gpio44"; + function = "qup12"; + }; + + pinmux-cs { + pins = "gpio45"; + function = "gpio"; + }; + }; + qup_spi10_default: qup-spi10-default { pinmux { pins = "gpio86", "gpio87", @@ -1644,6 +1726,19 @@ pinmux { }; }; + qup_spi10_cs_gpio: qup-spi10-cs-gpio { + pinmux { + pins = "gpio86", "gpio87", + "gpio88"; + function = "qup14"; + }; + + pinmux-cs { + pins = "gpio89"; + function = "gpio"; + }; + }; + qup_spi11_default: qup-spi11-default { pinmux { pins = "gpio53", "gpio54", @@ -1652,6 +1747,19 @@ pinmux { }; }; + qup_spi11_cs_gpio: qup-spi11-cs-gpio { + pinmux { + pins = "gpio53", "gpio54", + "gpio55"; + function = "qup15"; + }; + + pinmux-cs { + pins = "gpio56"; + function = "gpio"; + }; + }; + qup_uart0_default: qup-uart0-default { pinmux { pins = "gpio34", "gpio35", @@ -1743,6 +1851,45 @@ pinmux { }; }; + sec_mi2s_active: sec-mi2s-active { + pinmux { + pins = "gpio49", "gpio50", "gpio51"; + function = "mi2s_1"; + }; + + pinconf { + pins = "gpio49", "gpio50", "gpio51"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_active: pri-mi2s-active { + pinmux { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + function = "mi2s_0"; + }; + + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_mclk_active: pri-mi2s-mclk-active { + pinmux { + pins = "gpio57"; + function = "lpass_ext"; + }; + + pinconf { + pins = "gpio57"; + drive-strength = <8>; + bias-pull-up; + }; + }; + sdc1_on: sdc1-on { pinconf-clk { pins = "sdc1_clk"; @@ -1908,58 +2055,77 @@ gpu: gpu@5000000 { operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; gpu_opp_table: opp-table { compatible = "operating-points-v2"; + opp-825000000 { + opp-hz = /bits/ 64 <825000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x04>; + }; + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-level = ; opp-peak-kBps = <8532000>; + opp-supported-hw = <0x07>; }; opp-650000000 { opp-hz = /bits/ 64 <650000000>; opp-level = ; opp-peak-kBps = <7216000>; + opp-supported-hw = <0x07>; }; opp-565000000 { opp-hz = /bits/ 64 <565000000>; opp-level = ; opp-peak-kBps = <5412000>; + opp-supported-hw = <0x07>; }; opp-430000000 { opp-hz = /bits/ 64 <430000000>; opp-level = ; opp-peak-kBps = <5412000>; + opp-supported-hw = <0x07>; }; opp-355000000 { opp-hz = /bits/ 64 <355000000>; opp-level = ; opp-peak-kBps = <3072000>; + opp-supported-hw = <0x07>; }; opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-level = ; opp-peak-kBps = <3072000>; + opp-supported-hw = <0x07>; }; opp-180000000 { opp-hz = /bits/ 64 <180000000>; opp-level = ; opp-peak-kBps = <1804000>; + opp-supported-hw = <0x07>; }; }; }; adreno_smmu: iommu@5040000 { - compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2"; + compatible = "qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; reg = <0 0x05040000 0 0x10000>; #iommu-cells = <1>; #global-interrupts = <2>; @@ -2793,6 +2959,18 @@ camnoc_virt: interconnect@ac00000 { qcom,bcm-voters = <&apps_bcm_voter>; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sc7180-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_XO_CLK>; + clock-names = "bi_tcxo", "iface", "xo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: mdss@ae00000 { compatible = "qcom,sc7180-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3191,6 +3369,7 @@ watchdog@17c10000 { compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = ; }; timer@17c20000{ @@ -3390,6 +3569,36 @@ lpasscc: clock-controller@62d00000 { #power-domain-cells = <1>; }; + lpass_cpu: lpass@62f00000 { + compatible = "qcom,sc7180-lpass-cpu"; + + reg = <0 0x62f00000 0 0x29000>; + reg-names = "lpass-lpaif"; + + iommus = <&apps_smmu 0x1020 0>; + + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, + <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; + + clock-names = "pcnoc-sway-clk", "audio-core", + "mclk0", "pcnoc-mport-clk", + "mi2s-bit-clk0", "mi2s-bit-clk1"; + + + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = ; + interrupt-names = "lpass-irq-lpaif"; + }; + lpass_hm: clock-controller@63000000 { compatible = "qcom,sc7180-lpasshm"; reg = <0 0x63000000 0 0x28>; @@ -3402,8 +3611,8 @@ lpass_hm: clock-controller@63000000 { }; thermal-zones { - cpu0-thermal { - polling-delay-passive = <0>; + cpu0_thermal: cpu0-thermal { + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 1>; @@ -3451,8 +3660,8 @@ map1 { }; }; - cpu1-thermal { - polling-delay-passive = <0>; + cpu1_thermal: cpu1-thermal { + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 2>; @@ -3500,8 +3709,8 @@ map1 { }; }; - cpu2-thermal { - polling-delay-passive = <0>; + cpu2_thermal: cpu2-thermal { + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 3>; @@ -3549,8 +3758,8 @@ map1 { }; }; - cpu3-thermal { - polling-delay-passive = <0>; + cpu3_thermal: cpu3-thermal { + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 4>; @@ -3598,8 +3807,8 @@ map1 { }; }; - cpu4-thermal { - polling-delay-passive = <0>; + cpu4_thermal: cpu4-thermal { + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 5>; @@ -3647,8 +3856,8 @@ map1 { }; }; - cpu5-thermal { - polling-delay-passive = <0>; + cpu5_thermal: cpu5-thermal { + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 6>; @@ -3696,8 +3905,8 @@ map1 { }; }; - cpu6-thermal { - polling-delay-passive = <0>; + cpu6_thermal: cpu6-thermal { + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 9>; @@ -3737,8 +3946,8 @@ map1 { }; }; - cpu7-thermal { - polling-delay-passive = <0>; + cpu7_thermal: cpu7-thermal { + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 10>; @@ -3778,8 +3987,8 @@ map1 { }; }; - cpu8-thermal { - polling-delay-passive = <0>; + cpu8_thermal: cpu8-thermal { + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 11>; @@ -3819,8 +4028,8 @@ map1 { }; }; - cpu9-thermal { - polling-delay-passive = <0>; + cpu9_thermal: cpu9-thermal { + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 12>; @@ -3861,7 +4070,7 @@ map1 { }; aoss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 0>; @@ -3882,7 +4091,7 @@ aoss0_crit: aoss0_crit { }; cpuss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 7>; @@ -3902,7 +4111,7 @@ cpuss0_crit: cluster0_crit { }; cpuss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 8>; @@ -3922,16 +4131,16 @@ cpuss1_crit: cluster0_crit { }; gpuss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { gpuss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss0_crit: gpuss0_crit { @@ -3940,19 +4149,26 @@ gpuss0_crit: gpuss0_crit { type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpuss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens0 14>; trips { gpuss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss1_crit: gpuss1_crit { @@ -3961,10 +4177,17 @@ gpuss1_crit: gpuss1_crit { type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; aoss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 0>; @@ -3985,7 +4208,7 @@ aoss1_crit: aoss1_crit { }; cwlan-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 1>; @@ -4006,7 +4229,7 @@ cwlan_crit: cwlan_crit { }; audio-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 2>; @@ -4027,7 +4250,7 @@ audio_crit: audio_crit { }; ddr-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 3>; @@ -4048,7 +4271,7 @@ ddr_crit: ddr_crit { }; q6-hvx-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 4>; @@ -4069,7 +4292,7 @@ q6_hvx_crit: q6_hvx_crit { }; camera-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 5>; @@ -4090,7 +4313,7 @@ camera_crit: camera_crit { }; mdm-core-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 6>; @@ -4111,7 +4334,7 @@ mdm_crit: mdm_crit { }; mdm-dsp-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 7>; @@ -4132,7 +4355,7 @@ mdm_dsp_crit: mdm_dsp_crit { }; npu-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 8>; @@ -4153,7 +4376,7 @@ npu_crit: npu_crit { }; video-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; thermal-sensors = <&tsens1 9>; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index deb928d30..f91a92846 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -808,17 +808,19 @@ spmi_bus: spmi@800f000 { sdhc_1: sdhci@c0c4000 { compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0c0c4000 0x1000>, - <0x0c0c5000 0x1000>; - reg-names = "hc", "cqhci"; + <0x0c0c5000 0x1000>, + <0x0c0c8000 0x8000>; + reg-names = "hc", "cqhci", "ice"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "core", "iface", "xo", "ice"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; @@ -830,7 +832,7 @@ sdhc_1: sdhci@c0c4000 { status = "disabled"; }; - blsp1_dma: dma@c144000 { + blsp1_dma: dma-controller@c144000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c144000 0x1f000>; interrupts = ; @@ -944,7 +946,7 @@ blsp_i2c4: i2c@c178000 { status = "disabled"; }; - blsp2_dma: dma@c184000 { + blsp2_dma: dma-controller@c184000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c184000 0x1f000>; interrupts = ; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 64fc1bfd6..216a74f00 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -633,6 +633,15 @@ &mdss_mdp { status = "okay"; }; +/* + * Cheza fw does not properly program the GPU aperture to allow the + * GPU to update the SMMU pagetables for context switches. Work + * around this by dropping the "qcom,adreno-smmu" compat string. + */ +&adreno_smmu { + compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2"; +}; + &mss_pil { iommus = <&apps_smmu 0x781 0x0>, <&apps_smmu 0x724 0x3>; @@ -644,10 +653,12 @@ &pm8998_pwrkey { &qupv3_id_0 { status = "okay"; + iommus = <&apps_smmu 0x0 0x3>; }; &qupv3_id_1 { status = "okay"; + iommus = <&apps_smmu 0x6c0 0x3>; }; &sdhc_2 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi new file mode 100644 index 000000000..8f617f7b6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -0,0 +1,623 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &rmtfs_mem; + +/ { + aliases { + hsuart0 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Volume keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_down_gpio &volume_up_gpio>; + + vol-down { + label = "Volume down"; + linux,code = ; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + + vol-up { + label = "Volume up"; + linux,code = ; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + /* + * The rmtfs memory region in downstream is 'dynamically allocated' + * but given the same address every time. Hard code it as this address is + * where the modem firmware expects it to be. + */ + rmtfs_mem: memory@f5b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf5b01000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /* + * It seems like reserving the old rmtfs_mem region is also needed to prevent + * random crashes which are most likely modem related, more testing needed. + */ + removed_region: memory@88f00000 { + no-map; + reg = <0 0x88f00000 0 0x200000>; + }; + + ramoops: ramoops@ac300000 { + compatible = "ramoops"; + reg = <0 0xac300000 0 0x400000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x200000>; + devinfo-size = <0x1000>; + ecc-size = <16>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + /* + * The touchscreen regulator seems to be controlled somehow by a gpio. + * Model it as a fixed regulator and keep it on. Without schematics we + * don't know how this is actually wired up... + */ + ts_1p8_supply: ts-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_1p8_supply"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 88 0>; + enable-active-high; + regulator-boot-on; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/adsp.mbn"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdda_mipi_dsi0_pll: + vdda_qlink_lv: + vdda_ufs1_core: + vdda_usb1_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_1p8: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_mipi_dsi0_1p2: + vdda_ufs1_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + #address-cells = <1>; + #size-cells = <0>; + + /* + * Both devices use different panels but all other properties + * are common. Compatible line is declared in device dts. + */ + display_panel: panel@0 { + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; + }; +}; + +&i2c12 { + status = "okay"; + clock-frequency = <400000>; + + synaptics-rmi4-i2c@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_default_pins>; + + vdd-supply = <&vreg_l28a_3p0>; + vio-supply = <&ts_1p8_supply>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4_f12: rmi4-f12@12 { + reg = <0x12>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <144>; + syna,sensor-type = <1>; + syna,rezero-wait-ms = <200>; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +/* Modem/wifi*/ +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; +}; + +&pm8998_gpio { + volume_down_gpio: pm8998_gpio5 { + pinconf { + pins = "gpio5"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; + + volume_up_gpio: pm8998_gpio6 { + pinconf { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qup_i2c12_default { + mux { + pins = "gpio49", "gpio50"; + function = "qup12"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +/* + * Prevent garbage data on bluetooth UART lines + */ +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + /* + * This path is relative to the qca/ + * subdir under lib/firmware. + */ + firmware-name = "oneplus6/crnv21.bin"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; + + /* + * disable USB3 clock requirement as the device only supports + * USB2. + */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + /* + * We don't have the capability to switch modes yet. + */ + dr_mode = "peripheral"; + + /* fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Remove USB3 phy as it's unused on this device. */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + tri_state_key_default: tri_state_key_default { + mux { + pins = "gpio40", "gpio42", "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + ts_default_pins: ts-int { + mux { + pins = "gpio99", "gpio125"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + panel_reset_pins: panel-reset { + mux { + pins = "gpio6", "gpio25", "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-disable = <0>; + }; + }; + + panel_te_pin: panel-te { + mux { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; + + panel_esd_pin: panel-esd { + mux { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts new file mode 100644 index 000000000..72842c887 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6 (enchilada) device tree. + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845-oneplus-common.dtsi" + +/ { + model = "OnePlus 6"; + compatible = "oneplus,enchilada", "qcom,sdm845"; +}; + +&display_panel { + status = "okay"; + + compatible = "samsung,sofef00"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts new file mode 100644 index 000000000..969b36dc9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6T (fajita) device tree. + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845-oneplus-common.dtsi" + +/ { + model = "OnePlus 6T"; + compatible = "oneplus,fajita", "qcom,sdm845"; +}; + +&display_panel { + status = "okay"; + + compatible = "samsung,s6e3fc2x01"; +}; + +&rmi4_f12 { + touchscreen-y-mm = <148>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index f97f354af..454f794af 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1120,9 +1120,12 @@ qupv3_id_0: geniqup@8c0000 { clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x3 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c0: i2c@880000 { @@ -1137,6 +1140,10 @@ i2c0: i2c@880000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1150,6 +1157,9 @@ spi0: spi@880000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1163,6 +1173,9 @@ uart0: serial@880000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1178,6 +1191,10 @@ i2c1: i2c@884000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1191,6 +1208,9 @@ spi1: spi@884000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1204,6 +1224,9 @@ uart1: serial@884000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1219,6 +1242,10 @@ i2c2: i2c@888000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1232,6 +1259,9 @@ spi2: spi@888000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1245,6 +1275,9 @@ uart2: serial@888000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1260,6 +1293,10 @@ i2c3: i2c@88c000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1273,6 +1310,9 @@ spi3: spi@88c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1286,6 +1326,9 @@ uart3: serial@88c000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1301,6 +1344,10 @@ i2c4: i2c@890000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1314,6 +1361,9 @@ spi4: spi@890000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1327,6 +1377,9 @@ uart4: serial@890000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1342,6 +1395,10 @@ i2c5: i2c@894000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1355,6 +1412,9 @@ spi5: spi@894000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1368,6 +1428,9 @@ uart5: serial@894000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1383,6 +1446,10 @@ i2c6: i2c@898000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1396,6 +1463,9 @@ spi6: spi@898000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1409,6 +1479,9 @@ uart6: serial@898000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1437,6 +1510,9 @@ spi7: spi@89c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1450,6 +1526,9 @@ uart7: serial@89c000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -1460,9 +1539,12 @@ qupv3_id_1: geniqup@ac0000 { clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x6c3 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c8: i2c@a80000 { @@ -1477,6 +1559,10 @@ i2c8: i2c@a80000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1490,6 +1576,9 @@ spi8: spi@a80000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1503,6 +1592,9 @@ uart8: serial@a80000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1518,6 +1610,10 @@ i2c9: i2c@a84000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1531,6 +1627,9 @@ spi9: spi@a84000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1544,6 +1643,9 @@ uart9: serial@a84000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1559,6 +1661,10 @@ i2c10: i2c@a88000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1572,6 +1678,9 @@ spi10: spi@a88000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1585,6 +1694,9 @@ uart10: serial@a88000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1600,6 +1712,10 @@ i2c11: i2c@a8c000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1613,6 +1729,9 @@ spi11: spi@a8c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1626,6 +1745,9 @@ uart11: serial@a8c000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1641,6 +1763,10 @@ i2c12: i2c@a90000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1654,6 +1780,9 @@ spi12: spi@a90000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1667,6 +1796,9 @@ uart12: serial@a90000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1682,6 +1814,10 @@ i2c13: i2c@a94000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1695,6 +1831,9 @@ spi13: spi@a94000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1708,6 +1847,9 @@ uart13: serial@a94000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1723,6 +1865,10 @@ i2c14: i2c@a98000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1736,6 +1882,9 @@ spi14: spi@a98000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1749,6 +1898,9 @@ uart14: serial@a98000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1765,6 +1917,10 @@ i2c15: i2c@a9c000 { power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; status = "disabled"; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; }; spi15: spi@a9c000 { @@ -1777,6 +1933,9 @@ spi15: spi@a9c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1790,6 +1949,9 @@ uart15: serial@a9c000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -2138,6 +2300,36 @@ ufs_mem_phy_lanes: lanes@1d87400 { }; }; + cryptobam: dma@1dc4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = ; + clocks = <&rpmhcc 15>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely = <1>; + iommus = <&apps_smmu 0x704 0x1>, + <&apps_smmu 0x706 0x1>, + <&apps_smmu 0x714 0x1>, + <&apps_smmu 0x716 0x1>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,crypto-v5.4"; + reg = <0 0x01dfa000 0 0x6000>; + clocks = <&gcc GCC_CE1_AHB_CLK>, + <&gcc GCC_CE1_AHB_CLK>, + <&rpmhcc 15>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x704 0x1>, + <&apps_smmu 0x706 0x1>, + <&apps_smmu 0x714 0x1>, + <&apps_smmu 0x716 0x1>; + }; + ipa: ipa@1e40000 { compatible = "qcom,sdm845-ipa"; @@ -2150,8 +2342,8 @@ ipa: ipa@1e40000 { "ipa-shared", "gsi"; - interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>, - <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ipa", @@ -2174,8 +2366,6 @@ ipa: ipa@1e40000 { qcom,smem-state-names = "ipa-clock-enabled-valid", "ipa-clock-enabled"; - modem-remoteproc = <&mss_pil>; - status = "disabled"; }; @@ -3662,6 +3852,9 @@ venus: video-codec@aa00000 { iommus = <&apps_smmu 0x10a0 0x8>, <&apps_smmu 0x10b0 0x0>; memory-region = <&venus_mem>; + interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; + interconnect-names = "video-mem", "cpu-cfg"; video-core0 { compatible = "venus-decoder"; @@ -4104,7 +4297,7 @@ opp-257000000 { }; adreno_smmu: iommu@5040000 { - compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2"; + compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; reg = <0 0x5040000 0 0x10000>; #iommu-cells = <1>; #global-interrupts = <2>; @@ -4378,6 +4571,7 @@ watchdog@17980000 { compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; reg = <0 0x17980000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = ; }; apss_shared: mailbox@17990000 { @@ -4485,7 +4679,7 @@ msi-controller@17a40000 { }; }; - slimbam: dma@17184000 { + slimbam: dma-controller@17184000 { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0 0x17184000 0 0x2a000>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 888dc23a5..140db2d5b 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -8,10 +8,12 @@ /dts-v1/; #include +#include +#include #include #include #include -#include "sdm845.dtsi" +#include "sdm850.dtsi" #include "pm8998.dtsi" / { @@ -21,6 +23,47 @@ / { aliases { hsuart0 = &uart6; }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>; + + lid { + gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + linux,code = ; + wakeup-source; + wakeup-event-action = ; + }; + + mode { + gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + linux,code = ; + }; + }; + + panel { + compatible = "boe,nv133fhm-n61"; + no-hpd; + + ports { + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + + sn65dsi86_refclk: sn65dsi86-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <19200000>; + }; }; &adsp_pas { @@ -232,16 +275,30 @@ vreg_lvs2a_1p8: lvs2 { }; }; -&apps_smmu { - /* TODO: Figure out how to survive booting with this enabled */ - status = "disabled"; -}; - &cdsp_pas { firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn"; status = "okay"; }; +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &gcc { protected-clocks = , , @@ -301,6 +358,45 @@ tsc1: hid@10 { }; }; +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&sn65dsi86_pin_active>; + + enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&vreg_l14a_1p88>; + vccio-supply = <&vreg_l14a_1p88>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; +}; + &i2c11 { status = "okay"; clock-frequency = <400000>; @@ -317,10 +413,26 @@ ecsh: hid@5c { }; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &mss_pil { firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; }; +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + &qup_i2c12_default { drive-strength = <2>; bias-disable; @@ -427,6 +539,12 @@ codec { &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; + sn65dsi86_pin_active: sn65dsi86-enable { + pins = "gpio96"; + drive-strength = <2>; + bias-disable; + }; + i2c3_hid_active: i2c2-hid-active { pins = "gpio37"; function = "gpio"; @@ -462,6 +580,22 @@ wcd_intr_default: wcd_intr_default { bias-pull-down; drive-strength = <2>; }; + + lid_pin_active: lid-pin { + pins = "gpio124"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + mode_pin_active: mode-pin { + pins = "gpio95"; + function = "gpio"; + + input-enable; + bias-disable; + }; }; &uart6 { diff --git a/arch/arm64/boot/dts/qcom/sdm850.dtsi b/arch/arm64/boot/dts/qcom/sdm850.dtsi new file mode 100644 index 000000000..b1c2cf566 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM850 SoC device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845.dtsi" + +&cpu4_opp_table { + cpu4_opp33: opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <7216000 25497600>; + }; + + cpu4_opp34: opp-2956800000 { + opp-hz = /bits/ 64 <2956800000>; + opp-peak-kBps = <7216000 25497600>; + turbo-mode; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts new file mode 100644 index 000000000..fb2cf3d98 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8150 HDK"; + compatible = "qcom,sm8150-hdk", "qcom,sm8150"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + vol-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + }; + + vdd_pdphy: + vdda_usb_hs_3p1: + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vdd_usb_hs_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vdda_dsi_0_0p9: + vdda_dsi_1_0p9: + vdda_dsi_0_pll_0p9: + vdda_dsi_1_pll_0p9: + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_qrefs_0p875_5: + vdda_sp_sensor: + vdda_ufs_2ln_core_1: + vdda_ufs_2ln_core_2: + vdda_usb_ss_dp_core_1: + vdda_usb_ss_dp_core_2: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_usb_hs_1p8: + vdda_qrefs_vref_1p8: + vddpx_10_a: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_22: + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_hv_refgen0: + vdda_qlink_hv_ck: + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vddpx_5: + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vddpx_6: + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + + vreg_l2f_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l5f_2p85: ldo5 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6f_2p85: ldo6 { + regulator-initial-mode = ; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&pon { + pwrkey { + status = "okay"; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; +}; + +&remoteproc_adsp { + status = "okay"; + + firmware-name = "qcom/sm8150/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + + firmware-name = "qcom/sm8150/cdsp.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + + firmware-name = "qcom/sm8150/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <126 4>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p5>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l9a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs_2ln_core_1>; + vdda-max-microamp = <90200>; + vdda-pll-supply = <&vreg_l3c_1p2>; + vdda-pll-max-microamp = <19000>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_2_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index 6c6325c3a..3774f8e63 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -369,14 +369,22 @@ resin { &remoteproc_adsp { status = "okay"; + firmware-name = "qcom/sm8150/adsp.mdt"; }; &remoteproc_cdsp { status = "okay"; + firmware-name = "qcom/sm8150/cdsp.mdt"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8150/modem.mdt"; }; &remoteproc_slpi { status = "okay"; + firmware-name = "qcom/sm8150/slpi.mdt"; }; &tlmm { @@ -429,3 +437,12 @@ &usb_1 { &usb_1_dwc3 { dr_mode = "peripheral"; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index f0a872e02..e5bb17bc2 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -47,8 +47,12 @@ CPU0: cpu@0 { compatible = "qcom,kryo485"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -64,8 +68,12 @@ CPU1: cpu@100 { compatible = "qcom,kryo485"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -79,8 +87,12 @@ CPU2: cpu@200 { compatible = "qcom,kryo485"; reg = <0x0 0x200>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -93,8 +105,12 @@ CPU3: cpu@300 { compatible = "qcom,kryo485"; reg = <0x0 0x300>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -107,8 +123,12 @@ CPU4: cpu@400 { compatible = "qcom,kryo485"; reg = <0x0 0x400>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -121,8 +141,12 @@ CPU5: cpu@500 { compatible = "qcom,kryo485"; reg = <0x0 0x500>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -135,8 +159,12 @@ CPU6: cpu@600 { compatible = "qcom,kryo485"; reg = <0x0 0x600>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -149,14 +177,90 @@ CPU7: cpu@700 { compatible = "qcom,kryo485"; reg = <0x0 0x700>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <421>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; }; firmware { @@ -186,6 +290,59 @@ pmu { psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved-memory { @@ -490,6 +647,13 @@ mmss_noc: interconnect@1740000 { qcom,bcm-voters = <&apps_bcm_voter>; }; + system-cache-controller@9200000 { + compatible = "qcom,sm8150-llcc"; + reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = ; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -502,6 +666,8 @@ ufs_mem_hc: ufshc@1d84000 { resets = <&gcc GCC_UFS_PHY_BCR>; reset-names = "rst"; + iommus = <&apps_smmu 0x300 0>; + clock-names = "core_clk", "bus_aggr_clk", @@ -789,6 +955,597 @@ glink-edge { }; }; + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06042000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = <&swao_replicator_out>; + }; + }; + }; + }; + + funnel@6043000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06043000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = <&merge_funnel_in2>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + funnel2_in2: endpoint { + remote-endpoint = <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = <&funnel2_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&replicator1_in>; + }; + }; + }; + + in-ports { + port { + replicator_in0: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06047000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in0>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x05e0 0x0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; + }; + }; + }; + + replicator@604a000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x0604a000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + replicator1_out: endpoint { + remote-endpoint = <&swao_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + replicator1_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; + }; + }; + }; + + funnel@6b08000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06b08000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_funnel_out: endpoint { + remote-endpoint = <&swao_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + swao_funnel_in: endpoint { + remote-endpoint = <&replicator1_out>; + }; + }; + }; + }; + + etf@6b09000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06b09000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_etf_out: endpoint { + remote-endpoint = <&swao_replicator_in>; + }; + }; + }; + + in-ports { + port { + swao_etf_in: endpoint { + remote-endpoint = <&swao_funnel_out>; + }; + }; + }; + }; + + replicator@6b0a000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06b0a000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + qcom,replicator-loses-context; + + out-ports { + port { + swao_replicator_out: endpoint { + remote-endpoint = <&funnel1_in4>; + }; + }; + }; + + in-ports { + port { + swao_replicator_in: endpoint { + remote-endpoint = <&swao_etf_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = <&funnel2_in2>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = <&apss_funnel_out>; + }; + }; + }; + }; + remoteproc_cdsp: remoteproc@8300000 { compatible = "qcom,sm8150-cdsp-pas"; reg = <0x0 0x08300000 0x0 0x4040>; @@ -836,6 +1593,19 @@ usb_1_hsphy: phy@88e2000 { resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; + usb_2_hsphy: phy@88e3000 { + compatible = "qcom,sm8150-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + usb_1_qmpphy: phy@88e9000 { compatible = "qcom,sm8150-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x18c>, @@ -885,6 +1655,37 @@ gem_noc: interconnect@9680000 { qcom,bcm-voters = <&apps_bcm_voter>; }; + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sm8150-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x200>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: lane@88eb200 { + reg = <0 0x088eb200 0 0x200>, + <0 0x088eb400 0 0x200>, + <0 0x088eb800 0 0x800>, + <0 0x088eb600 0 0x200>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -922,6 +1723,7 @@ usb_1_dwc3: dwc3@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = ; + iommus = <&apps_smmu 0x140 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; phys = <&usb_1_hsphy>, <&usb_1_ssphy>; @@ -929,6 +1731,51 @@ usb_1_dwc3: dwc3@a600000 { }; }; + usb_2: usb@a8f8800 { + compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts = , + , + , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x160 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + camnoc_virt: interconnect@ac00000 { compatible = "qcom,sm8150-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; @@ -987,6 +1834,94 @@ spmi_bus: spmi@c440000 { cell-index = <0>; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + remoteproc_adsp: remoteproc@17300000 { compatible = "qcom,sm8150-adsp-pas"; reg = <0x0 0x17300000 0x0 0x4040>; @@ -1040,6 +1975,7 @@ watchdog@17c10000 { compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = ; }; timer@17c20000 { @@ -1206,6 +2142,29 @@ cpufreq_hw: cpufreq@18323000 { #freq-domain-cells = <1>; }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_mem>; + clock-names = "cxo_ref_clk_pin", "qdss"; + clocks = <&rpmhcc RPMH_RF_CLK2>, <&aoss_qmp>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x0640 0x1>; + status = "disabled"; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts new file mode 100644 index 000000000..c3a2c5aa6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -0,0 +1,454 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8250 HDK"; + compatible = "qcom,sm8250-hdk", "qcom,sm8250"; + + aliases { + serial0 = &uart12; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + vol-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1824000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p7: ldo7 { + regulator-name = "vreg_l7a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_ts_3p0: ldo13 { + regulator-name = "vreg_l13a_ts_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_3p3: ldo16 { + regulator-name = "vreg_l16a_3p3"; + regulator-min-microvolt = <3024000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l17a_2p96: ldo17 { + regulator-name = "vreg_l17a_2p96"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l18a_0p92: ldo18 { + regulator-name = "vreg_l18a_0p92"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_s8c_1p3: smps8 { + regulator-name = "vreg_s8c_1p3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p2: ldo2 { + regulator-name = "vreg_l2c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_cam_vcm0_2p85: ldo7 { + regulator-name = "vreg_l7c_cam_vcm0_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p0: ldo10 { + regulator-name = "vreg_l10c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-name = "vreg_l11c_3p3"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_l1f_cam_dvdd1_1p1: ldo1 { + regulator-name = "vreg_l1f_cam_dvdd1_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = ; + }; + + vreg_l2f_cam_dvdd0_1p2: ldo2 { + regulator-name = "vreg_l2f_cam_dvdd0_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3f_cam_dvdd2_1p05: ldo3 { + regulator-name = "vreg_l3f_cam_dvdd2_1p05"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = ; + }; + + vreg_l5f_cam_avdd0_2p85: ldo5 { + regulator-name = "vreg_l5f_cam_avdd0_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6f_cam_avdd1_2p8: ldo6 { + regulator-name = "vreg_l6f_cam_avdd1_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&pon { + pwrkey { + status = "okay"; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <40 4>; +}; + +&uart12 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l17a_2p96>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-max-microamp = <89900>; + vdda-pll-supply = <&vreg_l9a_1p2>; + vdda-pll-max-microamp = <18800>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_2_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda33-supply = <&vreg_l2a_3p1>; + vdda18-supply = <&vreg_l12a_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p92>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 98675e1f8..5b4c5b084 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -24,6 +24,106 @@ chosen { stdout-path = "serial0:115200n8"; }; + thermal-zones { + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-msm-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -186,6 +286,13 @@ vreg_l17a_3p0: ldo17 { regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; }; pm8150l-rpmh-regulators { @@ -358,6 +465,13 @@ &cdsp { firmware-name = "qcom/sm8250/cdsp.mbn"; }; +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/a650_zap.mbn"; + }; +}; + &i2c1 { status = "okay"; clock-frequency = <1000000>; @@ -378,6 +492,119 @@ &i2c15 { /* rtc6226 @ 64 */ }; +&pm8150_adc { + xo-therm@4c { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-therm@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm1@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + skin-therm@1 { + reg = <1>; + io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-therm1@2 { + reg = <2>; + io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150b_adc { + conn-therm@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc_tm { + status = "okay"; + + conn-therm@0 { + reg = <0>; + io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150l_adc_tm { + status = "okay"; + + camera-flash-therm@0 { + reg = <0>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + skin-msm-therm@1 { + reg = <1>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-therm2@2 { + reg = <2>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150l_adc { + camera-flash-therm@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-msm-therm@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm2@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_rtc { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -422,3 +649,49 @@ &ufs_mem_phy { vdda-pll-supply = <&vreg_l9a_1p2>; vdda-pll-max-microamp = <19000>; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index d057d85a1..947e1acca 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -4,14 +4,18 @@ */ #include +#include #include #include #include #include +#include #include #include #include +#include #include +#include #include / { @@ -89,14 +93,16 @@ CPU0: cpu@0 { compatible = "qcom,kryo485"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_0: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; L3_0: l3-cache { - compatible = "cache"; + compatible = "cache"; }; }; }; @@ -106,12 +112,14 @@ CPU1: cpu@100 { compatible = "qcom,kryo485"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_100: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -120,12 +128,14 @@ CPU2: cpu@200 { compatible = "qcom,kryo485"; reg = <0x0 0x200>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_200: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -134,12 +144,14 @@ CPU3: cpu@300 { compatible = "qcom,kryo485"; reg = <0x0 0x300>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; L2_300: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -148,12 +160,14 @@ CPU4: cpu@400 { compatible = "qcom,kryo485"; reg = <0x0 0x400>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_400: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -162,12 +176,14 @@ CPU5: cpu@500 { compatible = "qcom,kryo485"; reg = <0x0 0x500>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_500: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -177,12 +193,14 @@ CPU6: cpu@600 { compatible = "qcom,kryo485"; reg = <0x0 0x600>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; L2_600: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; }; }; @@ -191,12 +209,50 @@ CPU7: cpu@700 { compatible = "qcom,kryo485"; reg = <0x0 0x700>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <444>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; #cooling-cells = <2>; L2_700: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; }; }; }; @@ -214,6 +270,13 @@ memory@80000000 { reg = <0x0 0x80000000 0x0 0x0>; }; + mmcx_reg: mmcx-reg { + compatible = "regulator-fixed-domain"; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + regulator-name = "MMCX"; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = ; @@ -321,7 +384,7 @@ cdsp_secure_heap: memory@8bf00000 { }; }; - smem: qcom,smem { + smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; hwlocks = <&tcsr_mutex 3>; @@ -429,6 +492,13 @@ ipcc: mailbox@408000 { #mbox-cells = <2>; }; + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0 0x00793000 0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + qup_opp_table: qup-opp-table { compatible = "operating-points-v2"; @@ -456,6 +526,7 @@ qupv3_id_2: geniqup@8c0000 { <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; + iommus = <&apps_smmu 0x63 0x0>; ranges; status = "disabled"; @@ -662,6 +733,7 @@ qupv3_id_0: geniqup@9c0000 { <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; + iommus = <&apps_smmu 0x5a3 0x0>; ranges; status = "disabled"; @@ -924,6 +996,7 @@ qupv3_id_1: geniqup@ac0000 { <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; + iommus = <&apps_smmu 0x43 0x0>; ranges; status = "disabled"; @@ -1158,6 +1231,299 @@ mmss_noc: interconnect@1740000 { qcom,bcm-voters = <&apps_bcm_voter>; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_WIFI_CLKREF_EN>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: lanes@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx */ + <0 0x1c06400 0 0x200>, /* rx */ + <0 0x1c06800 0 0x1f0>, /* pcs */ + <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: lanes@1c0e200 { + reg = <0 0x1c0e200 0 0x170>, /* tx0 */ + <0 0x1c0e400 0 0x200>, /* rx0 */ + <0 0x1c0ea00 0 0x1f0>, /* pcs */ + <0 0x1c0e600 0 0x170>, /* tx1 */ + <0 0x1c0e800 0 0x200>, /* rx1 */ + <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + pcie2: pci@1c10000 { + compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + reg = <0 0x01c10000 0 0x3000>, + <0 0x64000000 0 0xf1d>, + <0 0x64000f20 0 0xa8>, + <0 0x64001000 0 0x1000>, + <0 0x64100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>, + <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_MDM_CLKREF_EN>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1d00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, + <0x100 &apps_smmu 0x1d01 0x1>; + + resets = <&gcc GCC_PCIE_2_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2_GDSC>; + + phys = <&pcie2_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2_phy: phy@1c16000 { + compatible = "qcom,sm8250-qmp-modem-pcie-phy"; + reg = <0 0x1c16000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MDM_CLKREF_EN>, + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie2_lane: lanes@1c0e200 { + reg = <0 0x1c16200 0 0x170>, /* tx0 */ + <0 0x1c16400 0 0x200>, /* rx0 */ + <0 0x1c16a00 0 0x1f0>, /* pcs */ + <0 0x1c16600 0 0x170>, /* tx1 */ + <0 0x1c16800 0 0x200>, /* rx1 */ + <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_2_pipe_clk"; + }; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1172,6 +1538,8 @@ ufs_mem_hc: ufshc@1d84000 { power-domains = <&gcc UFS_PHY_GDSC>; + iommus = <&apps_smmu 0x0e0 0>, <&apps_smmu 0x4e0 0>; + clock-names = "core_clk", "bus_aggr_clk", @@ -1241,15 +1609,169 @@ tcsr_mutex: hwlock@1f40000 { #hwlock-cells = <1>; }; + wsamacro: codec@3240000 { + compatible = "qcom,sm8250-lpass-wsa-macro"; + reg = <0 0x03240000 0 0x1000>; + clocks = <&audiocc 1>, + <&audiocc 0>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&aoncc 0>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_active>; + }; + + swr0: soundwire-controller@3250000 { + reg = <0 0x03250000 0 0x2000>; + compatible = "qcom,soundwire-v1.5.1"; + interrupts = ; + clocks = <&wsamacro>; + clock-names = "iface"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + }; + + audiocc: clock-controller@3300000 { + compatible = "qcom,sm8250-lpass-audiocc"; + reg = <0 0x03300000 0 0x30000>; + #clock-cells = <1>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio", "bus"; + }; + + vamacro: codec@3370000 { + compatible = "qcom,sm8250-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + clocks = <&aoncc 0>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + + clock-names = "mclk", "macro", "dcodec"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + aoncc: clock-controller@3380000 { + compatible = "qcom,sm8250-lpass-aoncc"; + reg = <0 0x03380000 0 0x40000>; + #clock-cells = <1>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio", "bus"; + }; + + lpass_tlmm: pinctrl@33c0000{ + compatible = "qcom,sm8250-lpass-lpi-pinctrl"; + reg = <0 0x033c0000 0x0 0x20000>, + <0 0x03550000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 14>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + wsa_swr_active: wsa-swr-active-pins { + clk { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + + }; + }; + + wsa_swr_sleep: wsa-swr-sleep-pins { + clk { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + input-enable; + bias-pull-down; + }; + + data { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + input-enable; + bias-pull-down; + + }; + }; + + dmic01_active: dmic01-active-pins { + clk { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + data { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic01_sleep: dmic01-sleep-pins { + clk { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <2>; + pull-down; + input-enable; + }; + }; + }; + gpu: gpu@3d00000 { - /* - * note: the amd,imageon compatible makes it possible - * to use the drm/msm driver without the display node, - * make sure to remove it when display node is added - */ compatible = "qcom,adreno-650.2", - "qcom,adreno", - "amd,imageon"; + "qcom,adreno"; #stream-id-cells = <16>; reg = <0 0x03d00000 0 0x40000>; @@ -1417,8 +1939,35 @@ IPCC_MPROC_SIGNAL_GLINK_QMP mboxes = <&ipcc IPCC_CLIENT_SLPI IPCC_MPROC_SIGNAL_GLINK_QMP>; - label = "lpass"; + label = "slpi"; qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; }; }; @@ -1455,8 +2004,204 @@ IPCC_MPROC_SIGNAL_GLINK_QMP mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_GLINK_QMP>; - label = "lpass"; + label = "cdsp"; qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1001 0x0460>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1002 0x0460>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x0460>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x0460>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x0460>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x0460>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x0460>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1008 0x0460>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + sound: sound { + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8250-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sm8250-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8250-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + reg-names = "reg-base", "dp_com"; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: lanes@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sm8250-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x200>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: lane@88eb200 { + reg = <0 0x088eb200 0 0x200>, + <0 0x088eb400 0 0x200>, + <0 0x088eb800 0 0x800>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x4a0 0x0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; }; }; @@ -1481,6 +2226,395 @@ npu_noc: interconnect@9990000 { qcom,bcm-voters = <&apps_bcm_voter>; }; + usb_1: usb@a6f8800 { + compatible = "qcom,sm8250-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm8250-llcc"; + reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sm8250-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x20 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + mdss: mdss@ae00000 { + compatible = "qcom,sdm845-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>, + <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "notused", "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <460000000>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <460000000>, + <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: mdp-opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + + dsi_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8250-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + mmcx-supply = <&mmcx_reg>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_link_clk_divsel_ten", + "dp_vco_divided_clk_src_mux", + "dptx1_phy_pll_link_clk", + "dptx1_phy_pll_vco_div_clk", + "dptx2_phy_pll_link_clk", + "dptx2_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk", + "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8250-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -1558,6 +2692,37 @@ tlmm: pinctrl@f100000 { gpio-ranges = <&tlmm 0 0 180>; wakeup-parent = <&pdc>; + pri_mi2s_active: pri-mi2s-active { + sclk { + pins = "gpio138"; + function = "mi2s0_sck"; + drive-strength = <8>; + bias-disable; + }; + + ws { + pins = "gpio141"; + function = "mi2s0_ws"; + drive-strength = <8>; + output-high; + }; + + data0 { + pins = "gpio139"; + function = "mi2s0_data0"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + data1 { + pins = "gpio140"; + function = "mi2s0_data1"; + drive-strength = <8>; + output-high; + }; + }; + qup_i2c0_default: qup-i2c0-default { mux { pins = "gpio28", "gpio29"; @@ -2154,6 +3319,135 @@ mux { function = "qup18"; }; }; + + tert_mi2s_active: tert-mi2s-active { + sck { + pins = "gpio133"; + function = "mi2s2_sck"; + drive-strength = <8>; + bias-disable; + }; + + data0 { + pins = "gpio134"; + function = "mi2s2_data0"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + ws { + pins = "gpio135"; + function = "mi2s2_ws"; + drive-strength = <8>; + output-high; + }; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; }; adsp: remoteproc@17300000 { @@ -2192,6 +3486,86 @@ IPCC_MPROC_SIGNAL_GLINK_QMP label = "lpass"; qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,apr-domain = ; + #address-cells = <1>; + #size-cells = <0>; + + apr-service@3 { + reg = ; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: cc { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1801 0x0>; + }; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; }; }; @@ -2208,6 +3582,7 @@ watchdog@17c10000 { compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = ; }; timer@17c20000 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts new file mode 100644 index 000000000..892365757 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Limited + */ + +/dts-v1/; + +#include +#include "sm8350.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sm8350 MTP"; + compatible = "qcom,sm8350-mtp", "qcom,sm8350"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; + vdd-l8-supply = <&vreg_s2c_0p8>; + + vreg_s10b_1p8: smps10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + }; + + vreg_l1b_0p88: ldo1 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p07: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p9: ldo3 { + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + vreg_l5b_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p96: ldo7 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1c_1p86>; + vdd-l2-l8-supply = <&vreg_s1c_1p86>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_s2c_0p8: smps2 { + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l4c_uim1: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l5c_uim2: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6c_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l10c_1p2: ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l11c_2p96: ldo11 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <52 8>; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi new file mode 100644 index 000000000..5ef460458 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -0,0 +1,499 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Limaited + */ + +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8350", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + no-map; + reg = <0x0 0x80700000 0x0 0x160000>; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + reserved_xbl_uefi_log: memory@80880000 { + reg = <0x0 0x80880000 0x0 0x14000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + cpucp_fw_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x4600000>; + no-map; + }; + + pil_camera_mem: mmeory@85200000 { + reg = <0x0 0x85200000 0x0 0x500000>; + no-map; + }; + + pil_video_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x500000>; + no-map; + }; + + pil_cvp_mem: memory@85c00000 { + reg = <0x0 0x85c00000 0x0 0x500000>; + no-map; + }; + + pil_adsp_mem: memory@86100000 { + reg = <0x0 0x86100000 0x0 0x2100000>; + no-map; + }; + + pil_slpi_mem: memory@88200000 { + reg = <0x0 0x88200000 0x0 0x1500000>; + no-map; + }; + + pil_cdsp_mem: memory@89700000 { + reg = <0x0 0x89700000 0x0 0x1e00000>; + no-map; + }; + + pil_ipa_fw_mem: memory@8b500000 { + reg = <0x0 0x8b500000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@8b510000 { + reg = <0x0 0x8b510000 0x0 0xa000>; + no-map; + }; + + pil_gpu_mem: memory@8b51a000 { + reg = <0x0 0x8b51a000 0x0 0x2000>; + no-map; + }; + + pil_spss_mem: memory@8b600000 { + reg = <0x0 0x8b600000 0x0 0x100000>; + no-map; + }; + + pil_modem_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0x10000000>; + no-map; + }; + + hyp_reserved_mem: memory@d0000000 { + reg = <0x0 0xd0000000 0x0 0x800000>; + no-map; + }; + + pil_trustedvm_mem: memory@d0800000 { + reg = <0x0 0xd0800000 0x0 0x76f7000>; + no-map; + }; + + qrtr_shbuf: memory@d7ef7000 { + reg = <0x0 0xd7ef7000 0x0 0x9000>; + no-map; + }; + + chan0_shbuf: memory@d7f00000 { + reg = <0x0 0xd7f00000 0x0 0x80000>; + no-map; + }; + + chan1_shbuf: memory@d7f80000 { + reg = <0x0 0xd7f80000 0x0 0x80000>; + no-map; + }; + + removed_mem: memory@d8800000 { + reg = <0x0 0xd8800000 0x0 0x6800000>; + no-map; + }; + }; + + smem: qcom,smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8350"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm8350-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qupv3_id_1: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc 121>, + <&gcc 122>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart2: serial@98c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc 83>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_default_state>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8350-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>, + <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>, + <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>, + <156 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + aoss_qmp: qmp@c300000 { + compatible = "qcom,sm8350-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8350-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 203>; + + qup_uart3_default_state: qup-uart3-default-state { + rx { + pins = "gpio18"; + function = "qup3"; + }; + tx { + pins = "gpio19"; + function = "qup3"; + }; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x0 0x17c27000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + rpmhcc: clock-controller { + compatible = "qcom,sm8350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; -- 2.31.1