From a59bcfa592e535dbd79eff1ce4c9c2024e67dfdc Mon Sep 17 00:00:00 2001 From: handsomeyingyan Date: Sun, 2 May 2021 10:41:10 +0800 Subject: [PATCH 78/78] backport 5.12 : make it compile in 5.10 --- .../devicetree/bindings/power/qcom,rpmpd.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 9 - arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts | 238 - arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts | 238 - arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts | 174 - arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 1327 ---- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 1195 ---- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 636 -- .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 623 -- .../dts/qcom/sdm845-oneplus-enchilada.dts | 19 - .../boot/dts/qcom/sdm845-oneplus-fajita.dts | 23 - .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 380 -- arch/arm64/boot/dts/qcom/sdm845.dtsi | 5356 ----------------- .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 727 --- arch/arm64/boot/dts/qcom/sdm850.dtsi | 21 - drivers/input/input.c | 8 + drivers/soc/qcom/rpmpd.c | 21 + include/dt-bindings/power/qcom-rpmpd.h | 7 + include/linux/input.h | 2 + 19 files changed, 39 insertions(+), 10966 deletions(-) delete mode 100644 arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts delete mode 100644 arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts delete mode 100644 arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts delete mode 100644 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi delete mode 100644 arch/arm64/boot/dts/qcom/sdm845-db845c.dts delete mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dts delete mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi delete mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts delete mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts delete mode 100644 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts delete mode 100644 arch/arm64/boot/dts/qcom/sdm845.dtsi delete mode 100644 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts delete mode 100644 arch/arm64/boot/dts/qcom/sdm850.dtsi diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 8058955fb..f136d06b7 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -16,6 +16,7 @@ description: properties: compatible: enum: + - qcom,msm8916-rpmpd - qcom,msm8976-rpmpd - qcom,msm8996-rpmpd - qcom,msm8998-rpmpd diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index e4b45c018..170e29487 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -62,15 +62,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts deleted file mode 100644 index bd7c25bb8..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts +++ /dev/null @@ -1,238 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Cheza board device tree source - * - * Copyright 2018 Google LLC. - */ - -/dts-v1/; - -#include "sdm845-cheza.dtsi" - -/ { - model = "Google Cheza (rev1)"; - compatible = "google,cheza-rev1", "qcom,sdm845"; - - /* - * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children - */ - - /* - * NOTE: Technically pp3500_a is not the exact same signal as - * pp3500_a_vbob (there's a load switch between them and the EC can - * control pp3500_a via "en_pp3300_a"), but from the AP's point of - * view they are the same. - */ - pp3500_a: - pp3500_a_vbob: pp3500-a-vbob-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_bob"; - - /* - * Comes on automatically when pp5000_ldo comes on, which - * comes on automatically when ppvar_sys comes on - */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3500000>; - regulator-max-microvolt = <3500000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_dx_edp: pp3300-dx-edp-regulator { - /* Yes, it's really 3.5 despite the name of the signal */ - regulator-min-microvolt = <3500000>; - regulator-max-microvolt = <3500000>; - - vin-supply = <&pp3500_a>; - }; -}; - -/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ - -/* - * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware - * that limits them to 3.0, and trying to run at 3.3V with that old firmware - * prevents the system from booting. - */ -&src_pp3000_l19a { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; -}; - -&src_pp3300_l22a { - /delete-property/regulator-boot-on; - /delete-property/regulator-always-on; -}; - -&src_pp3300_l28a { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; -}; - -&src_vreg_bob { - regulator-min-microvolt = <3500000>; - regulator-max-microvolt = <3500000>; - vin-supply = <&pp3500_a_vbob>; -}; - -/* - * NON-REGULATOR OVERRIDES - * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label - */ - -/* PINCTRL - board-specific pinctrl */ - -&tlmm { - gpio-line-names = "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "", - "FP_RST_L", - "FCAM_EN", - "", - "EDP_BRIJ_IRQ", - "EC_IN_RW_ODL", - "", - "RCAM_MCLK", - "FCAM_MCLK", - "", - "RCAM_EN", - "CCI0_SDA", - "CCI0_SCL", - "CCI1_SDA", - "CCI1_SCL", - "FCAM_RST_L", - "", - "PEN_RST_L", - "PEN_IRQ_L", - "", - "RCAM_VSYNC", - "ESIM_MISO", - "ESIM_MOSI", - "ESIM_CLK", - "ESIM_CS_L", - "AP_PEN_1V8_SDA", - "AP_PEN_1V8_SCL", - "AP_TS_I2C_SDA", - "AP_TS_I2C_SCL", - "RCAM_RST_L", - "", - "AP_EDP_BKLTEN", - "AP_BRD_ID1", - "BOOT_CONFIG_4", - "AMP_IRQ_L", - "EDP_BRIJ_I2C_SDA", - "EDP_BRIJ_I2C_SCL", - "EN_PP3300_DX_EDP", - "SD_CD_ODL", - "BT_UART_RTS", - "BT_UART_CTS", - "BT_UART_RXD", - "BT_UART_TXD", - "AMP_I2C_SDA", - "AMP_I2C_SCL", - "AP_BRD_ID3", - "", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "FORCED_USB_BOOT", - "AMP_BCLK", - "AMP_LRCLK", - "AMP_DOUT", - "AMP_DIN", - "AP_BRD_ID2", - "PEN_PDCT_L", - "HP_MCLK", - "HP_BCLK", - "HP_LRCLK", - "HP_DOUT", - "HP_DIN", - "", - "", - "", - "", - "BT_SLIMBUS_DATA", - "BT_SLIMBUS_CLK", - "AMP_RESET_L", - "", - "FCAM_VSYNC", - "", - "AP_SKU_ID1", - "EC_WOV_BCLK", - "EC_WOV_LRCLK", - "EC_WOV_DOUT", - "", - "", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - "AP_H1_SPI_CLK", - "AP_H1_SPI_CS_L", - "", - "AP_SPI_CS0_L", - "AP_SPI_MOSI", - "AP_SPI_MISO", - "", - "", - "AP_SPI_CLK", - "", - "RFFE6_CLK", - "RFFE6_DATA", - "BOOT_CONFIG_1", - "BOOT_CONFIG_2", - "BOOT_CONFIG_0", - "EDP_BRIJ_EN", - "", - "USB_HS_TX_EN", - "UIM2_DATA", - "UIM2_CLK", - "UIM2_RST", - "UIM2_PRESENT", - "UIM1_DATA", - "UIM1_CLK", - "UIM1_RST", - "", - "AP_SKU_ID2", - "SDM_GRFC_8", - "SDM_GRFC_9", - "AP_RST_REQ", - "HP_IRQ", - "TS_RESET_L", - "PEN_EJECT_ODL", - "HUB_RST_L", - "FP_TO_AP_IRQ", - "AP_EC_INT_L", - "", - "", - "TS_INT_L", - "AP_SUSPEND_L", - "SDM_GRFC_3", - "", - "H1_AP_INT_ODL", - "QLINK_REQ", - "QLINK_EN", - "SDM_GRFC_2", - "BOOT_CONFIG_3", - "WMSS_RESET_L", - "SDM_GRFC_0", - "SDM_GRFC_1", - "RFFE3_DATA", - "RFFE3_CLK", - "RFFE4_DATA", - "RFFE4_CLK", - "RFFE5_DATA", - "RFFE5_CLK", - "GNSS_EN", - "WCI2_LTE_COEX_RXD", - "WCI2_LTE_COEX_TXD", - "AP_RAM_ID1", - "AP_RAM_ID2", - "RFFE1_DATA", - "RFFE1_CLK"; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts deleted file mode 100644 index 2b7230594..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts +++ /dev/null @@ -1,238 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Cheza board device tree source - * - * Copyright 2018 Google LLC. - */ - -/dts-v1/; - -#include "sdm845-cheza.dtsi" - -/ { - model = "Google Cheza (rev2)"; - compatible = "google,cheza-rev2", "qcom,sdm845"; - - /* - * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children - */ - - /* - * NOTE: Technically pp3500_a is not the exact same signal as - * pp3500_a_vbob (there's a load switch between them and the EC can - * control pp3500_a via "en_pp3300_a"), but from the AP's point of - * view they are the same. - */ - pp3500_a: - pp3500_a_vbob: pp3500-a-vbob-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_bob"; - - /* - * Comes on automatically when pp5000_ldo comes on, which - * comes on automatically when ppvar_sys comes on - */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3500000>; - regulator-max-microvolt = <3500000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_dx_edp: pp3300-dx-edp-regulator { - /* Yes, it's really 3.5 despite the name of the signal */ - regulator-min-microvolt = <3500000>; - regulator-max-microvolt = <3500000>; - - vin-supply = <&pp3500_a>; - }; -}; - -/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ - -/* - * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware - * that limits them to 3.0, and trying to run at 3.3V with that old firmware - * prevents the system from booting. - */ -&src_pp3000_l19a { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; -}; - -&src_pp3300_l22a { - /delete-property/regulator-boot-on; - /delete-property/regulator-always-on; -}; - -&src_pp3300_l28a { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; -}; - -&src_vreg_bob { - regulator-min-microvolt = <3500000>; - regulator-max-microvolt = <3500000>; - vin-supply = <&pp3500_a_vbob>; -}; - -/* - * NON-REGULATOR OVERRIDES - * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label - */ - -/* PINCTRL - board-specific pinctrl */ - -&tlmm { - gpio-line-names = "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "BRIJ_SUSPEND", - "FP_RST_L", - "FCAM_EN", - "", - "EDP_BRIJ_IRQ", - "EC_IN_RW_ODL", - "", - "RCAM_MCLK", - "FCAM_MCLK", - "", - "RCAM_EN", - "CCI0_SDA", - "CCI0_SCL", - "CCI1_SDA", - "CCI1_SCL", - "FCAM_RST_L", - "FPMCU_BOOT0", - "PEN_RST_L", - "PEN_IRQ_L", - "FPMCU_SEL_OD", - "RCAM_VSYNC", - "ESIM_MISO", - "ESIM_MOSI", - "ESIM_CLK", - "ESIM_CS_L", - "AP_PEN_1V8_SDA", - "AP_PEN_1V8_SCL", - "AP_TS_I2C_SDA", - "AP_TS_I2C_SCL", - "RCAM_RST_L", - "", - "AP_EDP_BKLTEN", - "AP_BRD_ID1", - "BOOT_CONFIG_4", - "AMP_IRQ_L", - "EDP_BRIJ_I2C_SDA", - "EDP_BRIJ_I2C_SCL", - "EN_PP3300_DX_EDP", - "SD_CD_ODL", - "BT_UART_RTS", - "BT_UART_CTS", - "BT_UART_RXD", - "BT_UART_TXD", - "AMP_I2C_SDA", - "AMP_I2C_SCL", - "AP_BRD_ID3", - "", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "FORCED_USB_BOOT", - "AMP_BCLK", - "AMP_LRCLK", - "AMP_DOUT", - "AMP_DIN", - "AP_BRD_ID2", - "PEN_PDCT_L", - "HP_MCLK", - "HP_BCLK", - "HP_LRCLK", - "HP_DOUT", - "HP_DIN", - "", - "", - "", - "", - "BT_SLIMBUS_DATA", - "BT_SLIMBUS_CLK", - "AMP_RESET_L", - "", - "FCAM_VSYNC", - "", - "AP_SKU_ID1", - "EC_WOV_BCLK", - "EC_WOV_LRCLK", - "EC_WOV_DOUT", - "", - "", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - "AP_H1_SPI_CLK", - "AP_H1_SPI_CS_L", - "", - "AP_SPI_CS0_L", - "AP_SPI_MOSI", - "AP_SPI_MISO", - "", - "", - "AP_SPI_CLK", - "", - "RFFE6_CLK", - "RFFE6_DATA", - "BOOT_CONFIG_1", - "BOOT_CONFIG_2", - "BOOT_CONFIG_0", - "EDP_BRIJ_EN", - "", - "USB_HS_TX_EN", - "UIM2_DATA", - "UIM2_CLK", - "UIM2_RST", - "UIM2_PRESENT", - "UIM1_DATA", - "UIM1_CLK", - "UIM1_RST", - "", - "AP_SKU_ID2", - "SDM_GRFC_8", - "SDM_GRFC_9", - "AP_RST_REQ", - "HP_IRQ", - "TS_RESET_L", - "PEN_EJECT_ODL", - "HUB_RST_L", - "FP_TO_AP_IRQ", - "AP_EC_INT_L", - "", - "", - "TS_INT_L", - "AP_SUSPEND_L", - "SDM_GRFC_3", - "", - "H1_AP_INT_ODL", - "QLINK_REQ", - "QLINK_EN", - "SDM_GRFC_2", - "BOOT_CONFIG_3", - "WMSS_RESET_L", - "SDM_GRFC_0", - "SDM_GRFC_1", - "RFFE3_DATA", - "RFFE3_CLK", - "RFFE4_DATA", - "RFFE4_CLK", - "RFFE5_DATA", - "RFFE5_CLK", - "GNSS_EN", - "WCI2_LTE_COEX_RXD", - "WCI2_LTE_COEX_TXD", - "AP_RAM_ID1", - "AP_RAM_ID2", - "RFFE1_DATA", - "RFFE1_CLK"; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts deleted file mode 100644 index 1ba67be08..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts +++ /dev/null @@ -1,174 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Cheza board device tree source - * - * Copyright 2018 Google LLC. - */ - -/dts-v1/; - -#include "sdm845-cheza.dtsi" - -/ { - model = "Google Cheza (rev3+)"; - compatible = "google,cheza", "qcom,sdm845"; -}; - -/* PINCTRL - board-specific pinctrl */ - -&tlmm { - gpio-line-names = "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "BRIJ_SUSPEND", - "FP_RST_L", - "FCAM_EN", - "", - "EDP_BRIJ_IRQ", - "EC_IN_RW_ODL", - "", - "RCAM_MCLK", - "FCAM_MCLK", - "", - "RCAM_EN", - "CCI0_SDA", - "CCI0_SCL", - "CCI1_SDA", - "CCI1_SCL", - "FCAM_RST_L", - "FPMCU_BOOT0", - "PEN_RST_L", - "PEN_IRQ_L", - "FPMCU_SEL_OD", - "RCAM_VSYNC", - "ESIM_MISO", - "ESIM_MOSI", - "ESIM_CLK", - "ESIM_CS_L", - "AP_PEN_1V8_SDA", - "AP_PEN_1V8_SCL", - "AP_TS_I2C_SDA", - "AP_TS_I2C_SCL", - "RCAM_RST_L", - "", - "AP_EDP_BKLTEN", - "AP_BRD_ID0", - "BOOT_CONFIG_4", - "AMP_IRQ_L", - "EDP_BRIJ_I2C_SDA", - "EDP_BRIJ_I2C_SCL", - "EN_PP3300_DX_EDP", - "SD_CD_ODL", - "BT_UART_RTS", - "BT_UART_CTS", - "BT_UART_RXD", - "BT_UART_TXD", - "AMP_I2C_SDA", - "AMP_I2C_SCL", - "AP_BRD_ID2", - "", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "FORCED_USB_BOOT", - "AMP_BCLK", - "AMP_LRCLK", - "AMP_DOUT", - "AMP_DIN", - "AP_BRD_ID1", - "PEN_PDCT_L", - "HP_MCLK", - "HP_BCLK", - "HP_LRCLK", - "HP_DOUT", - "HP_DIN", - "", - "", - "", - "", - "BT_SLIMBUS_DATA", - "BT_SLIMBUS_CLK", - "AMP_RESET_L", - "", - "FCAM_VSYNC", - "", - "AP_SKU_ID0", - "EC_WOV_BCLK", - "EC_WOV_LRCLK", - "EC_WOV_DOUT", - "", - "", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - "AP_H1_SPI_CLK", - "AP_H1_SPI_CS_L", - "", - "AP_SPI_CS0_L", - "AP_SPI_MOSI", - "AP_SPI_MISO", - "", - "", - "AP_SPI_CLK", - "", - "RFFE6_CLK", - "RFFE6_DATA", - "BOOT_CONFIG_1", - "BOOT_CONFIG_2", - "BOOT_CONFIG_0", - "EDP_BRIJ_EN", - "", - "USB_HS_TX_EN", - "UIM2_DATA", - "UIM2_CLK", - "UIM2_RST", - "UIM2_PRESENT", - "UIM1_DATA", - "UIM1_CLK", - "UIM1_RST", - "", - "AP_SKU_ID1", - "SDM_GRFC_8", - "SDM_GRFC_9", - "AP_RST_REQ", - "HP_IRQ", - "TS_RESET_L", - "PEN_EJECT_ODL", - "HUB_RST_L", - "FP_TO_AP_IRQ", - "AP_EC_INT_L", - "", - "", - "TS_INT_L", - "AP_SUSPEND_L", - "SDM_GRFC_3", - /* - * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics - * call it BIOS_FLASH_WP_R_L. - */ - "AP_FLASH_WP_L", - "H1_AP_INT_ODL", - "QLINK_REQ", - "QLINK_EN", - "SDM_GRFC_2", - "BOOT_CONFIG_3", - "WMSS_RESET_L", - "SDM_GRFC_0", - "SDM_GRFC_1", - "RFFE3_DATA", - "RFFE3_CLK", - "RFFE4_DATA", - "RFFE4_CLK", - "RFFE5_DATA", - "RFFE5_CLK", - "GNSS_EN", - "WCI2_LTE_COEX_RXD", - "WCI2_LTE_COEX_TXD", - "AP_RAM_ID0", - "AP_RAM_ID1", - "RFFE1_DATA", - "RFFE1_CLK"; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi deleted file mode 100644 index 216a74f00..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ /dev/null @@ -1,1327 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Cheza device tree source (common between revisions) - * - * Copyright 2018 Google LLC. - */ - -#include -#include -#include -#include "sdm845.dtsi" - -/* PMICs depend on spmi_bus label and so must come after SoC */ -#include "pm8005.dtsi" -#include "pm8998.dtsi" - -/ { - aliases { - bluetooth0 = &bluetooth; - hsuart0 = &uart6; - serial0 = &uart9; - wifi0 = &wifi; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&cros_ec_pwm 0>; - enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; - power-supply = <&ppvar_sys>; - pinctrl-names = "default"; - pinctrl-0 = <&ap_edp_bklten>; - }; - - /* FIXED REGULATORS - parents above children */ - - /* This is the top level supply and variable voltage */ - ppvar_sys: ppvar-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "ppvar_sys"; - regulator-always-on; - regulator-boot-on; - }; - - /* This divides ppvar_sys by 2, so voltage is variable */ - src_vph_pwr: src-vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "src_vph_pwr"; - - /* EC turns on with switchcap_on_l; always on for AP */ - regulator-always-on; - regulator-boot-on; - - vin-supply = <&ppvar_sys>; - }; - - pp5000_a: pp5000-a-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp5000_a"; - - /* EC turns on with en_pp5000_a; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - vin-supply = <&ppvar_sys>; - }; - - src_vreg_bob: src-vreg-bob-regulator { - compatible = "regulator-fixed"; - regulator-name = "src_vreg_bob"; - - /* EC turns on with vbob_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_dx_edp: pp3300-dx-edp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_dx_edp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_dx_edp>; - }; - - /* - * Apparently RPMh does not provide support for PM8998 S4 because it - * is always-on; model it as a fixed regulator. - */ - src_pp1800_s4a: pm8998-smps4 { - compatible = "regulator-fixed"; - regulator-name = "src_pp1800_s4a"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - - vin-supply = <&src_vph_pwr>; - }; - - /* BOARD-SPECIFIC TOP LEVEL NODES */ - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pen_eject_odl>; - - pen-insert { - label = "Pen Insert"; - /* Insert = low, eject = high */ - gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - wakeup-source; - }; - }; - - panel: panel { - compatible ="innolux,p120zdg-bf1"; - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - no-hpd; - - ports { - panel_in: port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; -}; - -/* - * Reserved memory changes - * - * Putting this all together (out of order with the rest of the file) to keep - * all modifications to the memory map (from sdm845.dtsi) in one place. - */ - -/* - * Our mpss_region is 8MB bigger than the default one and that conflicts - * with venus_mem and cdsp_mem. - * - * For venus_mem we'll delete and re-create at a different address. - * - * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but - * that also means we need to delete cdsp_pas. - */ -/delete-node/ &venus_mem; -/delete-node/ &cdsp_mem; -/delete-node/ &cdsp_pas; -/delete-node/ &gpu_mem; - -/* Increase the size from 120 MB to 128 MB */ -&mpss_region { - reg = <0 0x8e000000 0 0x8000000>; -}; - -/* Increase the size from 2MB to 8MB */ -&rmtfs_mem { - reg = <0 0x88f00000 0 0x800000>; -}; - -/ { - reserved-memory { - venus_mem: memory@96000000 { - reg = <0 0x96000000 0 0x500000>; - no-map; - }; - }; -}; - -&qspi { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - - /* - * In theory chip supports up to 104 MHz and controller up - * to 80 MHz, but above 25 MHz wasn't reliable so we'll use - * that for now. b:117440651 - */ - spi-max-frequency = <25000000>; - spi-tx-bus-width = <2>; - spi-rx-bus-width = <2>; - }; -}; - - -&apps_rsc { - pm8998-rpmh-regulators { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - - vdd-s1-supply = <&src_vph_pwr>; - vdd-s2-supply = <&src_vph_pwr>; - vdd-s3-supply = <&src_vph_pwr>; - vdd-s4-supply = <&src_vph_pwr>; - vdd-s5-supply = <&src_vph_pwr>; - vdd-s6-supply = <&src_vph_pwr>; - vdd-s7-supply = <&src_vph_pwr>; - vdd-s8-supply = <&src_vph_pwr>; - vdd-s9-supply = <&src_vph_pwr>; - vdd-s10-supply = <&src_vph_pwr>; - vdd-s11-supply = <&src_vph_pwr>; - vdd-s12-supply = <&src_vph_pwr>; - vdd-s13-supply = <&src_vph_pwr>; - vdd-l1-l27-supply = <&src_pp1025_s7a>; - vdd-l2-l8-l17-supply = <&src_pp1350_s3a>; - vdd-l3-l11-supply = <&src_pp1025_s7a>; - vdd-l4-l5-supply = <&src_pp1025_s7a>; - vdd-l6-supply = <&src_vph_pwr>; - vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>; - vdd-l9-supply = <&src_pp2040_s5a>; - vdd-l10-l23-l25-supply = <&src_vreg_bob>; - vdd-l13-l19-l21-supply = <&src_vreg_bob>; - vdd-l16-l28-supply = <&src_vreg_bob>; - vdd-l18-l22-supply = <&src_vreg_bob>; - vdd-l20-l24-supply = <&src_vreg_bob>; - vdd-l26-supply = <&src_pp1350_s3a>; - vin-lvs-1-2-supply = <&src_pp1800_s4a>; - - src_pp1125_s2a: smps2 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - src_pp1350_s3a: smps3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - - src_pp2040_s5a: smps5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - - src_pp1025_s7a: smps7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - - vdd_qusb_hs0: - vdda_hp_pcie_core: - vdda_mipi_csi0_0p9: - vdda_mipi_csi1_0p9: - vdda_mipi_csi2_0p9: - vdda_mipi_dsi0_pll: - vdda_mipi_dsi1_pll: - vdda_qlink_lv: - vdda_qlink_lv_ck: - vdda_qrefs_0p875: - vdda_pcie_core: - vdda_pll_cc_ebi01: - vdda_pll_cc_ebi23: - vdda_sp_sensor: - vdda_ufs1_core: - vdda_ufs2_core: - vdda_usb1_ss_core: - vdda_usb2_ss_core: - src_pp875_l1a: ldo1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = ; - }; - - vddpx_10: - src_pp1200_l2a: ldo2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - - /* TODO: why??? */ - regulator-always-on; - }; - - pp1000_l3a_sdr845: ldo3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-initial-mode = ; - }; - - vdd_wcss_cx: - vdd_wcss_mx: - vdda_wcss_pll: - src_pp800_l5a: ldo5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = ; - }; - - vddpx_13: - src_pp1800_l6a: ldo6 { - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <1856000>; - regulator-initial-mode = ; - }; - - pp1800_l7a_wcn3990: ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - src_pp1200_l8a: ldo8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1248000>; - regulator-initial-mode = ; - }; - - pp1800_dx_pen: - src_pp1800_l9a: ldo9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - src_pp1800_l10a: ldo10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - pp1000_l11a_sdr845: ldo11 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1048000>; - regulator-initial-mode = ; - }; - - vdd_qfprom: - vdd_qfprom_sp: - vdda_apc1_cs_1p8: - vdda_gfx_cs_1p8: - vdda_qrefs_1p8: - vdda_qusb_hs0_1p8: - vddpx_11: - src_pp1800_l12a: ldo12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vddpx_2: - src_pp2950_l13a: ldo13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - src_pp1800_l14a: ldo14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - src_pp1800_l15a: ldo15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - pp2700_l16a: ldo16 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - regulator-initial-mode = ; - }; - - src_pp1300_l17a: ldo17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - }; - - pp2700_l18a: ldo18 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - /* - * NOTE: this rail should have been called - * src_pp3300_l19a in the schematic - */ - src_pp3000_l19a: ldo19 { - regulator-min-microvolt = <3304000>; - regulator-max-microvolt = <3304000>; - - regulator-initial-mode = ; - }; - - src_pp2950_l20a: ldo20 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - src_pp2950_l21a: ldo21 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - pp3300_hub: - src_pp3300_l22a: ldo22 { - regulator-min-microvolt = <3304000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = ; - /* - * HACK: Should add a usb hub node and driver - * to turn this on and off at suspend/resume time - */ - regulator-boot-on; - regulator-always-on; - }; - - pp3300_l23a_ch1_wcn3990: ldo23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vdda_qusb_hs0_3p1: - src_pp3075_l24a: ldo24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - regulator-initial-mode = ; - }; - - pp3300_l25a_ch0_wcn3990: ldo25 { - regulator-min-microvolt = <3304000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = ; - }; - - pp1200_hub: - vdda_hp_pcie_1p2: - vdda_hv_ebi0: - vdda_hv_ebi1: - vdda_hv_ebi2: - vdda_hv_ebi3: - vdda_mipi_csi_1p25: - vdda_mipi_dsi0_1p2: - vdda_mipi_dsi1_1p2: - vdda_pcie_1p2: - vdda_ufs1_1p2: - vdda_ufs2_1p2: - vdda_usb1_ss_1p2: - vdda_usb2_ss_1p2: - src_pp1200_l26a: ldo26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - pp3300_dx_pen: - src_pp3300_l28a: ldo28 { - regulator-min-microvolt = <3304000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = ; - }; - - src_pp1800_lvs1: lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - src_pp1800_lvs2: lvs2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - - pm8005-rpmh-regulators { - compatible = "qcom,pm8005-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-s1-supply = <&src_vph_pwr>; - vdd-s2-supply = <&src_vph_pwr>; - vdd-s3-supply = <&src_vph_pwr>; - vdd-s4-supply = <&src_vph_pwr>; - - src_pp600_s3c: smps3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <600000>; - }; - }; -}; - -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - -edp_brij_i2c: &i2c3 { - status = "okay"; - clock-frequency = <400000>; - - sn65dsi86_bridge: bridge@2d { - compatible = "ti,sn65dsi86"; - reg = <0x2d>; - pinctrl-names = "default"; - pinctrl-0 = <&edp_brij_en &edp_brij_irq>; - - interrupt-parent = <&tlmm>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; - - enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; - - vpll-supply = <&src_pp1800_s4a>; - vccio-supply = <&src_pp1800_s4a>; - vcca-supply = <&src_pp1200_l2a>; - vcc-supply = <&src_pp1200_l2a>; - - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - clock-names = "refclk"; - - no-hpd; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - sn65dsi86_out: endpoint { - remote-endpoint = <&panel_in_edp>; - }; - }; - }; - }; -}; - -ap_pen_1v8: &i2c11 { - status = "okay"; - clock-frequency = <400000>; - - digitizer@9 { - compatible = "wacom,w9013", "hid-over-i2c"; - reg = <0x9>; - pinctrl-names = "default"; - pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>; - - vdd-supply = <&pp3300_dx_pen>; - vddl-supply = <&pp1800_dx_pen>; - post-power-on-delay-ms = <100>; - - interrupt-parent = <&tlmm>; - interrupts = <24 IRQ_TYPE_LEVEL_LOW>; - - hid-descr-addr = <0x1>; - }; -}; - -amp_i2c: &i2c12 { - status = "okay"; - clock-frequency = <400000>; -}; - -ap_ts_i2c: &i2c14 { - status = "okay"; - clock-frequency = <400000>; - - touchscreen@10 { - compatible = "elan,ekth3500"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l &ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <125 IRQ_TYPE_LEVEL_LOW>; - - vcc33-supply = <&src_pp3300_l28a>; - - reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>; - }; -}; - -&ipa { - status = "okay"; - modem-init; -}; - -&lpasscc { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mdss_mdp { - status = "okay"; -}; - -/* - * Cheza fw does not properly program the GPU aperture to allow the - * GPU to update the SMMU pagetables for context switches. Work - * around this by dropping the "qcom,adreno-smmu" compat string. - */ -&adreno_smmu { - compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2"; -}; - -&mss_pil { - iommus = <&apps_smmu 0x781 0x0>, - <&apps_smmu 0x724 0x3>; -}; - -&pm8998_pwrkey { - status = "disabled"; -}; - -&qupv3_id_0 { - status = "okay"; - iommus = <&apps_smmu 0x0 0x3>; -}; - -&qupv3_id_1 { - status = "okay"; - iommus = <&apps_smmu 0x6c0 0x3>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>; - - vmmc-supply = <&src_pp2950_l21a>; - vqmmc-supply = <&vddpx_2>; - - cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; -}; - -&spi0 { - status = "okay"; -}; - -&spi5 { - status = "okay"; - - tpm@0 { - compatible = "google,cr50"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&h1_ap_int_odl>; - spi-max-frequency = <800000>; - interrupt-parent = <&tlmm>; - interrupts = <129 IRQ_TYPE_EDGE_RISING>; - }; -}; - -&spi10 { - status = "okay"; - - cros_ec: ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0>; - interrupt-parent = <&tlmm>; - interrupts = <122 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ec_ap_int_l>; - spi-max-frequency = <3000000>; - - cros_ec_pwm: ec-pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; - }; - - i2c_tunnel: i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - google,remote-bus = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - pdupdate { - compatible = "google,cros-ec-pd-update"; - }; - }; -}; - -#include -#include - -&uart6 { - status = "okay"; - - bluetooth: wcn3990-bt { - compatible = "qcom,wcn3990-bt"; - vddio-supply = <&src_pp1800_s4a>; - vddxo-supply = <&pp1800_l7a_wcn3990>; - vddrf-supply = <&src_pp1300_l17a>; - vddch0-supply = <&pp3300_l25a_ch0_wcn3990>; - max-speed = <3200000>; - }; -}; - -&uart9 { - status = "okay"; -}; - -&ufs_mem_hc { - status = "okay"; - - reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; - - vcc-supply = <&src_pp2950_l20a>; - vcc-max-microamp = <600000>; -}; - -&ufs_mem_phy { - status = "okay"; - - vdda-phy-supply = <&vdda_ufs1_core>; - vdda-pll-supply = <&vdda_ufs1_1p2>; -}; - -&usb_1 { - status = "okay"; - - /* We'll use this as USB 2.0 only */ - qcom,select-utmi-as-pipe-clk; -}; - -&usb_1_dwc3 { - /* - * The hardware design intends this port to be hooked up in peripheral - * mode, so we'll hardcode it here. Some details: - * - SDM845 expects only a single Type C connector so it has only one - * native Type C port but cheza has two Type C connectors. - * - The only source of DP is the single native Type C port. - * - On cheza we want to be able to hook DP up to _either_ of the - * two Type C connectors and want to be able to achieve 4 lanes of DP. - * - When you configure a Type C port for 4 lanes of DP you lose USB3. - * - In order to make everything work, the native Type C port is always - * configured as 4-lanes DP so it's always available. - * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then - * sent to the two Type C connectors. - * - The extra USB2 lines from the native Type C port are always - * setup as "peripheral" so that we can mux them over to one connector - * or the other if someone needs the connector configured as a gadget - * (but they only get USB2 speeds). - * - * All the hardware muxes would allow us to hook things up in different - * ways to some potential benefit for static configurations (you could - * achieve extra USB2 bandwidth by using two different ports for the - * two connectors or possibly even get USB3 peripheral mode), but in - * each case you end up forcing to disconnect/reconnect an in-use - * USB session in some cases depending on what you hotplug into the - * other connector. Thus hardcoding this as peripheral makes sense. - */ - dr_mode = "peripheral"; - - /* - * We always need the high speed pins as 4-lanes DP in case someone - * hotplugs a DP peripheral. Thus limit this port to a max of high - * speed. - */ - maximum-speed = "high-speed"; - - /* - * We don't need the usb3-phy since we run in highspeed mode always, so - * re-define these properties removing the superspeed USB PHY reference. - */ - phys = <&usb_1_hsphy>; - phy-names = "usb2-phy"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdd-supply = <&vdda_usb1_ss_core>; - vdda-pll-supply = <&vdda_qusb_hs0_1p8>; - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; - qcom,preemphasis-level = ; - qcom,preemphasis-width = ; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - /* We have this hooked up to a hub and we always use in host mode */ - dr_mode = "host"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdd-supply = <&vdda_usb2_ss_core>; - vdda-pll-supply = <&vdda_qusb_hs0_1p8>; - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; -}; - -&usb_2_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vdda_usb2_ss_1p2>; - vdda-pll-supply = <&vdda_usb2_ss_core>; -}; - -&wifi { - status = "okay"; - - vdd-0.8-cx-mx-supply = <&src_pp800_l5a >; - vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>; - vdd-1.3-rfa-supply = <&src_pp1300_l17a>; - vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>; -}; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ - -&qspi_cs0 { - pinconf { - pins = "gpio90"; - bias-disable; - }; -}; - -&qspi_clk { - pinconf { - pins = "gpio95"; - bias-disable; - }; -}; - -&qspi_data01 { - pinconf { - pins = "gpio91", "gpio92"; - - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; - }; -}; - -&qup_i2c3_default { - pinconf { - pins = "gpio41", "gpio42"; - drive-strength = <2>; - - /* Has external pullup */ - bias-disable; - }; -}; - -&qup_i2c11_default { - pinconf { - pins = "gpio31", "gpio32"; - drive-strength = <2>; - - /* Has external pullup */ - bias-disable; - }; -}; - -&qup_i2c12_default { - pinconf { - pins = "gpio49", "gpio50"; - drive-strength = <2>; - - /* Has external pullup */ - bias-disable; - }; -}; - -&qup_i2c14_default { - pinconf { - pins = "gpio33", "gpio34"; - drive-strength = <2>; - - /* Has external pullup */ - bias-disable; - }; -}; - -&qup_spi0_default { - pinconf { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_spi5_default { - pinconf { - pins = "gpio85", "gpio86", "gpio87", "gpio88"; - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_spi10_default { - pinconf { - pins = "gpio53", "gpio54", "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_uart6_default { - /* Change pinmux to all 4 pins since CTS and RTS are connected */ - pinmux { - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; - }; - - pinconf-cts { - /* - * Configure a pull-down on 45 (CTS) to match the pull of - * the Bluetooth module. - */ - pins = "gpio45"; - bias-pull-down; - }; - - pinconf-rts-tx { - /* We'll drive 46 (RTS) and 47 (TX), so no pull */ - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - pinconf-rx { - /* - * Configure a pull-up on 48 (RX). This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - pins = "gpio48"; - bias-pull-up; - }; -}; - -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; - - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; -}; - -/* PINCTRL - board-specific pinctrl */ -&pm8005_gpio { - gpio-line-names = "", - "", - "SLB", - ""; -}; - -&pm8998_adc { - adc-chan@4d { - reg = ; - label = "sdm_temp"; - }; - - adc-chan@4e { - reg = ; - label = "quiet_temp"; - }; - - adc-chan@4f { - reg = ; - label = "lte_temp_1"; - }; - - adc-chan@50 { - reg = ; - label = "lte_temp_2"; - }; - - adc-chan@51 { - reg = ; - label = "charger_temp"; - }; -}; - -&pm8998_gpio { - gpio-line-names = "", - "", - "SW_CTRL", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "CFG_OPT1", - "WCSS_PWR_REQ", - "", - "CFG_OPT2", - "SLB"; -}; - -&tlmm { - /* - * pinctrl settings for pins that have no real owners. - */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&bios_flash_wp_r_l>, - <&ap_suspend_l_deassert>; - - pinctrl-1 = <&bios_flash_wp_r_l>, - <&ap_suspend_l_assert>; - - /* - * Hogs prevent usermode from changing the value. A GPIO can be both - * here and in the pinctrl section. - */ - ap-suspend-l-hog { - gpio-hog; - gpios = <126 GPIO_ACTIVE_LOW>; - output-low; - }; - - ap_edp_bklten: ap-edp-bklten { - pinmux { - pins = "gpio37"; - function = "gpio"; - }; - - pinconf { - pins = "gpio37"; - drive-strength = <2>; - bias-disable; - }; - }; - - bios_flash_wp_r_l: bios-flash-wp-r-l { - pinmux { - pins = "gpio128"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio128"; - bias-disable; - }; - }; - - ec_ap_int_l: ec-ap-int-l { - pinmux { - pins = "gpio122"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio122"; - bias-pull-up; - }; - }; - - edp_brij_en: edp-brij-en { - pinmux { - pins = "gpio102"; - function = "gpio"; - }; - - pinconf { - pins = "gpio102"; - drive-strength = <2>; - bias-disable; - }; - }; - - edp_brij_irq: edp-brij-irq { - pinmux { - pins = "gpio10"; - function = "gpio"; - }; - - pinconf { - pins = "gpio10"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - en_pp3300_dx_edp: en-pp3300-dx-edp { - pinmux { - pins = "gpio43"; - function = "gpio"; - }; - - pinconf { - pins = "gpio43"; - drive-strength = <2>; - bias-disable; - }; - }; - - h1_ap_int_odl: h1-ap-int-odl { - pinmux { - pins = "gpio129"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio129"; - bias-pull-up; - }; - }; - - pen_eject_odl: pen-eject-odl { - pinmux { - pins = "gpio119"; - function = "gpio"; - bias-pull-up; - }; - }; - - pen_irq_l: pen-irq-l { - pinmux { - pins = "gpio24"; - function = "gpio"; - }; - - pinconf { - pins = "gpio24"; - - /* Has external pullup */ - bias-disable; - }; - }; - - pen_pdct_l: pen-pdct-l { - pinmux { - pins = "gpio63"; - function = "gpio"; - }; - - pinconf { - pins = "gpio63"; - - /* Has external pullup */ - bias-disable; - }; - }; - - pen_rst_l: pen-rst-l { - pinmux { - pins = "gpio23"; - function = "gpio"; - }; - - pinconf { - pins = "gpio23"; - bias-disable; - drive-strength = <2>; - - /* - * The pen driver doesn't currently support - * driving this reset line. By specifying - * output-high here we're relying on the fact - * that this pin has a default pulldown at boot - * (which makes sure the pen was in reset if it - * was powered) and then we set it high here to - * take it out of reset. Better would be if the - * pen driver could control this and we could - * remove "output-high" here. - */ - output-high; - }; - }; - - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; - - /* - * It seems that mmc_test reports errors if drive - * strength is not 16. - */ - drive-strength = <16>; - }; - }; - - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; - }; - - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; - }; - - sd_cd_odl: sd-cd-odl { - pinmux { - pins = "gpio44"; - function = "gpio"; - }; - - pinconf { - pins = "gpio44"; - bias-pull-up; - }; - }; - - ts_int_l: ts-int-l { - pinmux { - pins = "gpio125"; - function = "gpio"; - }; - - pinconf { - pins = "gpio125"; - bias-pull-up; - }; - }; - - ts_reset_l: ts-reset-l { - pinmux { - pins = "gpio118"; - function = "gpio"; - }; - - pinconf { - pins = "gpio118"; - bias-disable; - drive-strength = <2>; - }; - }; - - ap_suspend_l_assert: ap_suspend_l_assert { - config { - pins = "gpio126"; - function = "gpio"; - bias-no-pull; - drive-strength = <2>; - output-low; - }; - }; - - ap_suspend_l_deassert: ap_suspend_l_deassert { - config { - pins = "gpio126"; - function = "gpio"; - bias-no-pull; - drive-strength = <2>; - output-high; - }; - }; -}; - -&venus { - video-firmware { - iommus = <&apps_smmu 0x10b2 0x0>; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts deleted file mode 100644 index c4ac6f5dc..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ /dev/null @@ -1,1195 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2019, Linaro Ltd. - */ - -/dts-v1/; - -#include -#include -#include -#include -#include -#include "sdm845.dtsi" -#include "pm8998.dtsi" -#include "pmi8998.dtsi" - -/ { - model = "Thundercomm Dragonboard 845c"; - compatible = "thundercomm,db845c", "qcom,sdm845"; - - aliases { - serial0 = &uart9; - hsuart0 = &uart6; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - dc12v: dc12v-regulator { - compatible = "regulator-fixed"; - regulator-name = "DC12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - gpio_keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&vol_up_pin_a>; - - vol-up { - label = "Volume Up"; - linux,code = ; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - - user4 { - label = "green:user4"; - gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "panic-indicator"; - default-state = "off"; - }; - - wlan { - label = "yellow:wlan"; - gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - bt { - label = "blue:bt"; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bluetooth-power"; - default-state = "off"; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <<9611_out>; - }; - }; - }; - - lt9611_1v8: lt9611-vdd18-regulator { - compatible = "regulator-fixed"; - regulator-name = "LT9611_1V8"; - - vin-supply = <&vdc_5v>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - lt9611_3v3: lt9611-3v3 { - compatible = "regulator-fixed"; - regulator-name = "LT9611_3V3"; - - vin-supply = <&vdc_3v3>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - // enable-active-high; - }; - - pcie0_1p05v: pcie-0-1p05v-regulator { - compatible = "regulator-fixed"; - regulator-name = "PCIE0_1.05V"; - - vin-supply = <&vbat>; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; - // enable-active-high; - }; - - cam0_dvdd_1v2: reg_cam0_dvdd_1v2 { - compatible = "regulator-fixed"; - regulator-name = "CAM0_DVDD_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - enable-active-high; - gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cam0_dvdd_1v2_en_default>; - vin-supply = <&vbat>; - }; - - cam0_avdd_2v8: reg_cam0_avdd_2v8 { - compatible = "regulator-fixed"; - regulator-name = "CAM0_AVDD_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - enable-active-high; - gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cam0_avdd_2v8_en_default>; - vin-supply = <&vbat>; - }; - - /* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */ - cam3_avdd_2v8: reg_cam3_avdd_2v8 { - compatible = "regulator-fixed"; - regulator-name = "CAM3_AVDD_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - vin-supply = <&vbat>; - }; - - pcie0_3p3v_dual: vldo-3v3-regulator { - compatible = "regulator-fixed"; - regulator-name = "VLDO_3V3"; - - vin-supply = <&vbat>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_pwren_state>; - }; - - v5p0_hdmiout: v5p0-hdmiout-regulator { - compatible = "regulator-fixed"; - regulator-name = "V5P0_HDMIOUT"; - - vin-supply = <&vdc_5v>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <500000>; - - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - // enable-active-high; - }; - - vbat: vbat-regulator { - compatible = "regulator-fixed"; - regulator-name = "VBAT"; - - vin-supply = <&dc12v>; - regulator-min-microvolt = <4200000>; - regulator-max-microvolt = <4200000>; - regulator-always-on; - }; - - vbat_som: vbat-som-regulator { - compatible = "regulator-fixed"; - regulator-name = "VBAT_SOM"; - - vin-supply = <&dc12v>; - regulator-min-microvolt = <4200000>; - regulator-max-microvolt = <4200000>; - regulator-always-on; - }; - - vdc_3v3: vdc-3v3-regulator { - compatible = "regulator-fixed"; - regulator-name = "VDC_3V3"; - vin-supply = <&dc12v>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdc_5v: vdc-5v-regulator { - compatible = "regulator-fixed"; - regulator-name = "VDC_5V"; - - vin-supply = <&dc12v>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <500000>; - regulator-always-on; - }; - - vreg_s4a_1p8: vreg-s4a-1p8 { - compatible = "regulator-fixed"; - regulator-name = "vreg_s4a_1p8"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - - vin-supply = <&vbat_som>; - }; -}; - -&adsp_pas { - status = "okay"; - - firmware-name = "qcom/sdm845/adsp.mdt"; -}; - -&apps_rsc { - pm8998-rpmh-regulators { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-s6-supply = <&vph_pwr>; - vdd-s7-supply = <&vph_pwr>; - vdd-s8-supply = <&vph_pwr>; - vdd-s9-supply = <&vph_pwr>; - vdd-s10-supply = <&vph_pwr>; - vdd-s11-supply = <&vph_pwr>; - vdd-s12-supply = <&vph_pwr>; - vdd-s13-supply = <&vph_pwr>; - vdd-l1-l27-supply = <&vreg_s7a_1p025>; - vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; - vdd-l3-l11-supply = <&vreg_s7a_1p025>; - vdd-l4-l5-supply = <&vreg_s7a_1p025>; - vdd-l6-supply = <&vph_pwr>; - vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; - vdd-l9-supply = <&vreg_bob>; - vdd-l10-l23-l25-supply = <&vreg_bob>; - vdd-l13-l19-l21-supply = <&vreg_bob>; - vdd-l16-l28-supply = <&vreg_bob>; - vdd-l18-l22-supply = <&vreg_bob>; - vdd-l20-l24-supply = <&vreg_bob>; - vdd-l26-supply = <&vreg_s3a_1p35>; - vin-lvs-1-2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p35: smps3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - - vreg_s5a_2p04: smps5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - - vreg_s7a_1p025: smps7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - - vreg_l1a_0p875: ldo1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = ; - }; - - vreg_l5a_0p8: ldo5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = ; - }; - - vreg_l12a_1p8: ldo12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l7a_1p8: ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l13a_2p95: ldo13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l17a_1p3: ldo17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - }; - - vreg_l20a_2p95: ldo20 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2968000>; - regulator-initial-mode = ; - }; - - vreg_l21a_2p95: ldo21 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2968000>; - regulator-initial-mode = ; - }; - - vreg_l24a_3p075: ldo24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - regulator-initial-mode = ; - }; - - vreg_l25a_3p3: ldo25 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vreg_l26a_1p2: ldo26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - - pmi8998-rpmh-regulators { - compatible = "qcom,pmi8998-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-bob-supply = <&vph_pwr>; - - vreg_bob: bob { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3600000>; - regulator-initial-mode = ; - regulator-allow-bypass; - }; - }; -}; - -&cdsp_pas { - status = "okay"; - firmware-name = "qcom/sdm845/cdsp.mdt"; -}; - -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - -&gcc { - protected-clocks = , - , - , - , - ; -}; - -&gpu { - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; -}; - -&i2c10 { - status = "okay"; - clock-frequency = <400000>; - - lt9611_codec: hdmi-bridge@3b { - compatible = "lontium,lt9611"; - reg = <0x3b>; - #sound-dai-cells = <1>; - - interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; - - reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; - - vdd-supply = <<9611_1v8>; - vcc-supply = <<9611_3v3>; - - pinctrl-names = "default"; - pinctrl-0 = <<9611_irq_pin>, <&dsi_sw_sel>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lt9611_a: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@2 { - reg = <2>; - - lt9611_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; -}; - -&i2c11 { - /* On Low speed expansion */ - label = "LS-I2C1"; - status = "okay"; -}; - -&i2c14 { - /* On Low speed expansion */ - label = "LS-I2C0"; - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mdss_mdp { - status = "okay"; -}; - -&mss_pil { - status = "okay"; - firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; - - vddpe-3v3-supply = <&pcie0_3p3v_dual>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_default_state>; -}; - -&pcie0_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; -}; - -&pcie1 { - status = "okay"; - perst-gpio = <&tlmm 102 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_state>; -}; - -&pcie1_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; -}; - -&pm8998_gpio { - gpio-line-names = - "NC", - "NC", - "WLAN_SW_CTRL", - "NC", - "PM_GPIO5_BLUE_BT_LED", - "VOL_UP_N", - "NC", - "ADC_IN1", - "PM_GPIO9_YEL_WIFI_LED", - "CAM0_AVDD_EN", - "NC", - "CAM0_DVDD_EN", - "PM_GPIO13_GREEN_U4_LED", - "DIV_CLK2", - "NC", - "NC", - "NC", - "SMB_STAT", - "NC", - "NC", - "ADC_IN2", - "OPTION1", - "WCSS_PWR_REQ", - "PM845_GPIO24", - "OPTION2", - "PM845_SLB"; - - cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en { - pins = "gpio12"; - function = "normal"; - - bias-pull-up; - drive-push-pull; - qcom,drive-strength = ; - }; - - cam0_avdd_2v8_en_default: cam0-avdd-2v8-en { - pins = "gpio10"; - function = "normal"; - - bias-pull-up; - drive-push-pull; - qcom,drive-strength = ; - }; - - vol_up_pin_a: vol-up-active { - pins = "gpio6"; - function = "normal"; - input-enable; - bias-pull-up; - qcom,drive-strength = ; - }; -}; - -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = ; - }; -}; - -/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ -&q6afedai { - qi2s@22 { - reg = <22>; - qcom,sd-lines = <0 1 2 3>; - }; -}; - -&q6asmdai { - dai@0 { - reg = <0>; - }; - - dai@1 { - reg = <1>; - }; - - dai@2 { - reg = <2>; - }; - - dai@3 { - reg = <3>; - direction = <2>; - is-compress-dai; - }; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; - - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - - bus-width = <4>; - cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; -}; - -&sound { - compatible = "qcom,db845c-sndcard"; - pinctrl-0 = <&quat_mi2s_active - &quat_mi2s_sd0_active - &quat_mi2s_sd1_active - &quat_mi2s_sd2_active - &quat_mi2s_sd3_active>; - pinctrl-names = "default"; - model = "DB845c"; - audio-routing = - "RX_BIAS", "MCLK", - "AMIC1", "MIC BIAS1", - "AMIC2", "MIC BIAS2", - "DMIC0", "MIC BIAS1", - "DMIC1", "MIC BIAS1", - "DMIC2", "MIC BIAS3", - "DMIC3", "MIC BIAS3", - "SpkrLeft IN", "SPK1 OUT", - "SpkrRight IN", "SPK2 OUT", - "MM_DL1", "MultiMedia1 Playback", - "MM_DL2", "MultiMedia2 Playback", - "MM_DL4", "MultiMedia4 Playback", - "MultiMedia3 Capture", "MM_UL3"; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - mm2-dai-link { - link-name = "MultiMedia2"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; - }; - }; - - mm3-dai-link { - link-name = "MultiMedia3"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; - }; - }; - - mm4-dai-link { - link-name = "MultiMedia4"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; - }; - }; - - hdmi-dai-link { - link-name = "HDMI Playback"; - cpu { - sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <<9611_codec 0>; - }; - }; - - slim-dai-link { - link-name = "SLIM Playback"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; - }; - }; - - slimcap-dai-link { - link-name = "SLIM Capture"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_TX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9340 1>; - }; - }; -}; - -&spi2 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; -}; - -&tlmm { - cam0_default: cam0_default { - rst { - pins = "gpio9"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - mclk0 { - pins = "gpio13"; - function = "cam_mclk"; - - drive-strength = <16>; - bias-disable; - }; - }; - - cam3_default: cam3_default { - rst { - function = "gpio"; - pins = "gpio21"; - - drive-strength = <16>; - bias-disable; - }; - - mclk3 { - function = "cam_mclk"; - pins = "gpio16"; - - drive-strength = <16>; - bias-disable; - }; - }; - - dsi_sw_sel: dsi-sw-sel { - pins = "gpio120"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - output-high; - }; - - lt9611_irq_pin: lt9611-irq { - pins = "gpio84"; - function = "gpio"; - bias-disable; - }; - - pcie0_default_state: pcie0-default { - clkreq { - pins = "gpio36"; - function = "pci_e0"; - bias-pull-up; - }; - - reset-n { - pins = "gpio35"; - function = "gpio"; - - drive-strength = <2>; - output-low; - bias-pull-down; - }; - - wake-n { - pins = "gpio37"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie0_pwren_state: pcie0-pwren { - pins = "gpio90"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - pcie1_default_state: pcie1-default { - perst-n { - pins = "gpio102"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - clkreq { - pins = "gpio103"; - function = "pci_e1"; - bias-pull-up; - }; - - wake-n { - pins = "gpio11"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - - reset-n { - pins = "gpio75"; - function = "gpio"; - - drive-strength = <16>; - bias-pull-up; - output-high; - }; - }; - - sdc2_default_state: sdc2-default { - clk { - pins = "sdc2_clk"; - bias-disable; - - /* - * It seems that mmc_test reports errors if drive - * strength is not 16 on clk, cmd, and data pins. - */ - drive-strength = <16>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - }; - - sdc2_card_det_n: sd-card-det-n { - pins = "gpio126"; - function = "gpio"; - bias-pull-up; - }; - - wcd_intr_default: wcd_intr_default { - pins = <54>; - function = "gpio"; - - input-enable; - bias-pull-down; - drive-strength = <2>; - }; -}; - -&uart3 { - label = "LS-UART0"; - status = "disabled"; -}; - -&uart6 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - }; -}; - -&uart9 { - label = "LS-UART1"; - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdd-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; - qcom,preemphasis-level = ; - qcom,preemphasis-width = ; -}; - -&usb_1_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l26a_1p2>; - vdda-pll-supply = <&vreg_l1a_0p875>; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdd-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; -}; - -&usb_2_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l26a_1p2>; - vdda-pll-supply = <&vreg_l1a_0p875>; -}; - -&ufs_mem_hc { - status = "okay"; - - reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l20a_2p95>; - vcc-max-microamp = <800000>; -}; - -&ufs_mem_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; -}; - -&wcd9340{ - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; - - swm: swm@c85 { - left_spkr: wsa8810-left{ - compatible = "sdw10217201000"; - reg = <0 1>; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; - #thermal-sensor-cells = <0>; - sound-name-prefix = "SpkrLeft"; - #sound-dai-cells = <0>; - }; - - right_spkr: wsa8810-right{ - compatible = "sdw10217201000"; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; - reg = <0 2>; - #thermal-sensor-cells = <0>; - sound-name-prefix = "SpkrRight"; - #sound-dai-cells = <0>; - }; - }; -}; - -&wifi { - status = "okay"; - - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - - qcom,snoc-host-cap-8bit-quirk; -}; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ -&qup_spi2_default { - drive-strength = <16>; -}; - -&qup_uart3_default{ - pinmux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "qup3"; - }; -}; - -&qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-disable; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; - -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; - - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; -}; - -&pm8998_gpio { - -}; - -&cci { - status = "okay"; -}; - -&cci_i2c0 { - camera@10 { - compatible = "ovti,ov8856"; - reg = <0x10>; - - // CAM0_RST_N - reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&cam0_default>; - gpios = <&tlmm 13 0>, - <&tlmm 9 GPIO_ACTIVE_LOW>; - - clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; - clock-names = "xvclk"; - clock-frequency = <19200000>; - - /* The &vreg_s4a_1p8 trace is powered on as a, - * so it is represented by a fixed regulator. - * - * The 2.8V vdda-supply and 1.2V vddd-supply regulators - * both have to be enabled through the power management - * gpios. - */ - power-domains = <&clock_camcc TITAN_TOP_GDSC>; - - dovdd-supply = <&vreg_lvs1a_1p8>; - avdd-supply = <&cam0_avdd_2v8>; - dvdd-supply = <&cam0_dvdd_1v2>; - - status = "disable"; - - port { - ov8856_ep: endpoint { - clock-lanes = <1>; - link-frequencies = /bits/ 64 - <360000000 180000000>; - data-lanes = <1 2 3 4>; -// remote-endpoint = <&csiphy0_ep>; - }; - }; - }; -}; - -&cci_i2c1 { - camera@60 { - compatible = "ovti,ov7251"; - - // I2C address as per ov7251.txt linux documentation - reg = <0x60>; - - // CAM3_RST_N - enable-gpios = <&tlmm 21 0>; - pinctrl-names = "default"; - pinctrl-0 = <&cam3_default>; - gpios = <&tlmm 16 0>, - <&tlmm 21 0>; - - clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - /* The &vreg_s4a_1p8 trace always powered on. - * - * The 2.8V vdda-supply regulator is enabled when the - * vreg_s4a_1p8 trace is pulled high. - * It too is represented by a fixed regulator. - * - * No 1.2V vddd-supply regulator is used. - */ - power-domains = <&clock_camcc TITAN_TOP_GDSC>; - - vdddo-supply = <&vreg_lvs1a_1p8>; - vdda-supply = <&cam3_avdd_2v8>; - - status = "disable"; - - port { - ov7251_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 1>; -// remote-endpoint = <&csiphy3_ep>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts deleted file mode 100644 index 1372fe860..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ /dev/null @@ -1,636 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SDM845 MTP board device tree source - * - * Copyright (c) 2018, The Linux Foundation. All rights reserved. - */ - -/dts-v1/; - -#include -#include -#include "sdm845.dtsi" - -/ { - model = "Qualcomm Technologies, Inc. SDM845 MTP"; - compatible = "qcom,sdm845-mtp", "qcom,sdm845"; - - aliases { - serial0 = &uart9; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - /* - * Apparently RPMh does not provide support for PM8998 S4 because it - * is always-on; model it as a fixed regulator. - */ - vreg_s4a_1p8: pm8998-smps4 { - compatible = "regulator-fixed"; - regulator-name = "vreg_s4a_1p8"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - - vin-supply = <&vph_pwr>; - }; -}; - -&adsp_pas { - status = "okay"; - firmware-name = "qcom/sdm845/adsp.mdt"; -}; - -&apps_rsc { - pm8998-rpmh-regulators { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-s6-supply = <&vph_pwr>; - vdd-s7-supply = <&vph_pwr>; - vdd-s8-supply = <&vph_pwr>; - vdd-s9-supply = <&vph_pwr>; - vdd-s10-supply = <&vph_pwr>; - vdd-s11-supply = <&vph_pwr>; - vdd-s12-supply = <&vph_pwr>; - vdd-s13-supply = <&vph_pwr>; - vdd-l1-l27-supply = <&vreg_s7a_1p025>; - vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; - vdd-l3-l11-supply = <&vreg_s7a_1p025>; - vdd-l4-l5-supply = <&vreg_s7a_1p025>; - vdd-l6-supply = <&vph_pwr>; - vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; - vdd-l9-supply = <&vreg_bob>; - vdd-l10-l23-l25-supply = <&vreg_bob>; - vdd-l13-l19-l21-supply = <&vreg_bob>; - vdd-l16-l28-supply = <&vreg_bob>; - vdd-l18-l22-supply = <&vreg_bob>; - vdd-l20-l24-supply = <&vreg_bob>; - vdd-l26-supply = <&vreg_s3a_1p35>; - vin-lvs-1-2-supply = <&vreg_s4a_1p8>; - - vreg_s2a_1p125: smps2 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - vreg_s3a_1p35: smps3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - - vreg_s5a_2p04: smps5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - - vreg_s7a_1p025: smps7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - - vdd_qusb_hs0: - vdda_hp_pcie_core: - vdda_mipi_csi0_0p9: - vdda_mipi_csi1_0p9: - vdda_mipi_csi2_0p9: - vdda_mipi_dsi0_pll: - vdda_mipi_dsi1_pll: - vdda_qlink_lv: - vdda_qlink_lv_ck: - vdda_qrefs_0p875: - vdda_pcie_core: - vdda_pll_cc_ebi01: - vdda_pll_cc_ebi23: - vdda_sp_sensor: - vdda_ufs1_core: - vdda_ufs2_core: - vdda_usb1_ss_core: - vdda_usb2_ss_core: - vreg_l1a_0p875: ldo1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = ; - }; - - vddpx_10: - vreg_l2a_1p2: ldo2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - regulator-always-on; - }; - - vreg_l3a_1p0: ldo3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-initial-mode = ; - }; - - vdd_wcss_cx: - vdd_wcss_mx: - vdda_wcss_pll: - vreg_l5a_0p8: ldo5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = ; - }; - - vddpx_13: - vreg_l6a_1p8: ldo6 { - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <1856000>; - regulator-initial-mode = ; - }; - - vreg_l7a_1p8: ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l8a_1p2: ldo8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1248000>; - regulator-initial-mode = ; - }; - - vreg_l9a_1p8: ldo9 { - regulator-min-microvolt = <1704000>; - regulator-max-microvolt = <2928000>; - regulator-initial-mode = ; - }; - - vreg_l10a_1p8: ldo10 { - regulator-min-microvolt = <1704000>; - regulator-max-microvolt = <2928000>; - regulator-initial-mode = ; - }; - - vreg_l11a_1p0: ldo11 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1048000>; - regulator-initial-mode = ; - }; - - vdd_qfprom: - vdd_qfprom_sp: - vdda_apc1_cs_1p8: - vdda_gfx_cs_1p8: - vdda_qrefs_1p8: - vdda_qusb_hs0_1p8: - vddpx_11: - vreg_l12a_1p8: ldo12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vddpx_2: - vreg_l13a_2p95: ldo13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l14a_1p88: ldo14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l15a_1p8: ldo15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l16a_2p7: ldo16 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - regulator-initial-mode = ; - }; - - vreg_l17a_1p3: ldo17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - }; - - vreg_l18a_2p7: ldo18 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l19a_3p0: ldo19 { - regulator-min-microvolt = <2856000>; - regulator-max-microvolt = <3104000>; - regulator-initial-mode = ; - }; - - vreg_l20a_2p95: ldo20 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l21a_2p95: ldo21 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l22a_2p85: ldo22 { - regulator-min-microvolt = <2864000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vreg_l23a_3p3: ldo23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vdda_qusb_hs0_3p1: - vreg_l24a_3p075: ldo24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - regulator-initial-mode = ; - }; - - vreg_l25a_3p3: ldo25 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vdda_hp_pcie_1p2: - vdda_hv_ebi0: - vdda_hv_ebi1: - vdda_hv_ebi2: - vdda_hv_ebi3: - vdda_mipi_csi_1p25: - vdda_mipi_dsi0_1p2: - vdda_mipi_dsi1_1p2: - vdda_pcie_1p2: - vdda_ufs1_1p2: - vdda_ufs2_1p2: - vdda_usb1_ss_1p2: - vdda_usb2_ss_1p2: - vreg_l26a_1p2: ldo26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - vreg_l28a_3p0: ldo28 { - regulator-min-microvolt = <2856000>; - regulator-max-microvolt = <3008000>; - regulator-initial-mode = ; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - - pmi8998-rpmh-regulators { - compatible = "qcom,pmi8998-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-bob-supply = <&vph_pwr>; - - vreg_bob: bob { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3600000>; - regulator-initial-mode = ; - regulator-allow-bypass; - }; - }; - - pm8005-rpmh-regulators { - compatible = "qcom,pm8005-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - - vreg_s3c_0p6: smps3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <600000>; - }; - }; -}; - -&cdsp_pas { - status = "okay"; - firmware-name = "qcom/sdm845/cdsp.mdt"; -}; - -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - qcom,dual-dsi-mode; - qcom,master-dsi; - - #address-cells = <1>; - #size-cells = <0>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&truly_in_0>; - data-lanes = <0 1 2 3>; - }; - }; - }; - - panel@0 { - compatible = "truly,nt35597-2K-display"; - reg = <0>; - vdda-supply = <&vreg_l14a_1p88>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - truly_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - truly_in_1: endpoint { - remote-endpoint = <&dsi1_out>; - }; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - -&dsi1 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi1_1p2>; - - qcom,dual-dsi-mode; - - ports { - port@1 { - endpoint { - remote-endpoint = <&truly_in_1>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi1_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi1_pll>; -}; - -&gcc { - protected-clocks = , - , - , - , - ; -}; - -&gpu { - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; -}; - -&i2c10 { - status = "okay"; - clock-frequency = <400000>; -}; - -&mdss { - status = "okay"; -}; - -&mdss_mdp { - status = "okay"; -}; - -&mss_pil { - status = "okay"; - firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; - - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vddpx_2>; - - cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; -}; - -&uart9 { - status = "okay"; -}; - -&ufs_mem_hc { - status = "okay"; - - reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l20a_2p95>; - vcc-max-microamp = <600000>; -}; - -&ufs_mem_phy { - status = "okay"; - - vdda-phy-supply = <&vdda_ufs1_core>; - vdda-pll-supply = <&vdda_ufs1_1p2>; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - /* Until we have Type C hooked up we'll force this as peripheral. */ - dr_mode = "peripheral"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdd-supply = <&vdda_usb1_ss_core>; - vdda-pll-supply = <&vdda_qusb_hs0_1p8>; - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; - qcom,preemphasis-level = ; - qcom,preemphasis-width = ; -}; - -&usb_1_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vdda_usb1_ss_1p2>; - vdda-pll-supply = <&vdda_usb1_ss_core>; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - /* - * Though the USB block on SDM845 can support host, there's no vbus - * signal for this port on MTP. Thus (unless you have a non-compliant - * hub that works without vbus) the only sensible thing is to force - * peripheral mode. - */ - dr_mode = "peripheral"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdd-supply = <&vdda_usb2_ss_core>; - vdda-pll-supply = <&vdda_qusb_hs0_1p8>; - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; -}; - -&usb_2_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vdda_usb2_ss_1p2>; - vdda-pll-supply = <&vdda_usb2_ss_core>; -}; - -&wifi { - status = "okay"; - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; -}; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ - -&qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; - - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; -}; - -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; - - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; - - /* - * It seems that mmc_test reports errors if drive - * strength is not 16 on clk, cmd, and data pins. - */ - drive-strength = <16>; - }; - }; - - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; - }; - - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; - }; - - sd_card_det_n: sd-card-det-n { - pinmux { - pins = "gpio126"; - function = "gpio"; - }; - - pinconf { - pins = "gpio126"; - bias-pull-up; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi deleted file mode 100644 index 8f617f7b6..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ /dev/null @@ -1,623 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source - * - * Copyright (c) 2020, The Linux Foundation. All rights reserved. - */ - -/dts-v1/; - -#include -#include -#include - -#include "sdm845.dtsi" -#include "pm8998.dtsi" -#include "pmi8998.dtsi" - -/delete-node/ &rmtfs_mem; - -/ { - aliases { - hsuart0 = &uart6; - }; - - gpio-keys { - compatible = "gpio-keys"; - label = "Volume keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&volume_down_gpio &volume_up_gpio>; - - vol-down { - label = "Volume down"; - linux,code = ; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; - debounce-interval = <15>; - }; - - vol-up { - label = "Volume up"; - linux,code = ; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; - debounce-interval = <15>; - }; - }; - - reserved-memory { - /* - * The rmtfs memory region in downstream is 'dynamically allocated' - * but given the same address every time. Hard code it as this address is - * where the modem firmware expects it to be. - */ - rmtfs_mem: memory@f5b01000 { - compatible = "qcom,rmtfs-mem"; - reg = <0 0xf5b01000 0 0x200000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = <15>; - }; - - /* - * It seems like reserving the old rmtfs_mem region is also needed to prevent - * random crashes which are most likely modem related, more testing needed. - */ - removed_region: memory@88f00000 { - no-map; - reg = <0 0x88f00000 0 0x200000>; - }; - - ramoops: ramoops@ac300000 { - compatible = "ramoops"; - reg = <0 0xac300000 0 0x400000>; - record-size = <0x40000>; - console-size = <0x40000>; - ftrace-size = <0x40000>; - pmsg-size = <0x200000>; - devinfo-size = <0x1000>; - ecc-size = <16>; - }; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - /* - * Apparently RPMh does not provide support for PM8998 S4 because it - * is always-on; model it as a fixed regulator. - */ - vreg_s4a_1p8: pm8998-smps4 { - compatible = "regulator-fixed"; - regulator-name = "vreg_s4a_1p8"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - - vin-supply = <&vph_pwr>; - }; - - /* - * The touchscreen regulator seems to be controlled somehow by a gpio. - * Model it as a fixed regulator and keep it on. Without schematics we - * don't know how this is actually wired up... - */ - ts_1p8_supply: ts-1p8-regulator { - compatible = "regulator-fixed"; - regulator-name = "ts_1p8_supply"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 88 0>; - enable-active-high; - regulator-boot-on; - }; -}; - -&adsp_pas { - status = "okay"; - firmware-name = "qcom/sdm845/oneplus6/adsp.mbn"; -}; - -&apps_rsc { - pm8998-rpmh-regulators { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-s6-supply = <&vph_pwr>; - vdd-s7-supply = <&vph_pwr>; - vdd-s8-supply = <&vph_pwr>; - vdd-s9-supply = <&vph_pwr>; - vdd-s10-supply = <&vph_pwr>; - vdd-s11-supply = <&vph_pwr>; - vdd-s12-supply = <&vph_pwr>; - vdd-s13-supply = <&vph_pwr>; - vdd-l1-l27-supply = <&vreg_s7a_1p025>; - vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; - vdd-l3-l11-supply = <&vreg_s7a_1p025>; - vdd-l4-l5-supply = <&vreg_s7a_1p025>; - vdd-l6-supply = <&vph_pwr>; - vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; - vdd-l9-supply = <&vreg_bob>; - vdd-l10-l23-l25-supply = <&vreg_bob>; - vdd-l13-l19-l21-supply = <&vreg_bob>; - vdd-l16-l28-supply = <&vreg_bob>; - vdd-l18-l22-supply = <&vreg_bob>; - vdd-l20-l24-supply = <&vreg_bob>; - vdd-l26-supply = <&vreg_s3a_1p35>; - vin-lvs-1-2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p35: smps3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - - vreg_s5a_2p04: smps5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - - vreg_s7a_1p025: smps7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - - vdda_mipi_dsi0_pll: - vdda_qlink_lv: - vdda_ufs1_core: - vdda_usb1_ss_core: - vreg_l1a_0p875: ldo1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = ; - }; - - vreg_l2a_1p2: ldo2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - regulator-always-on; - }; - - vreg_l5a_0p8: ldo5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = ; - }; - - vreg_l7a_1p8: ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vdda_qusb_hs0_1p8: - vreg_l12a_1p8: ldo12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l14a_1p88: ldo14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - regulator-always-on; - }; - - vreg_l17a_1p3: ldo17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - }; - - vreg_l20a_2p95: ldo20 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vdda_qusb_hs0_3p1: - vreg_l24a_3p075: ldo24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - regulator-initial-mode = ; - }; - - vreg_l25a_3p3: ldo25 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vdda_mipi_dsi0_1p2: - vdda_ufs1_1p2: - vreg_l26a_1p2: ldo26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - vreg_l28a_3p0: ldo28 { - regulator-min-microvolt = <2856000>; - regulator-max-microvolt = <3008000>; - regulator-initial-mode = ; - }; - }; - - pmi8998-rpmh-regulators { - compatible = "qcom,pmi8998-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-bob-supply = <&vph_pwr>; - - vreg_bob: bob { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3600000>; - regulator-initial-mode = ; - regulator-allow-bypass; - }; - }; - - pm8005-rpmh-regulators { - compatible = "qcom,pm8005-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - - vreg_s3c_0p6: smps3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <600000>; - }; - }; -}; - -&cdsp_pas { - status = "okay"; - firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; -}; - -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - #address-cells = <1>; - #size-cells = <0>; - - /* - * Both devices use different panels but all other properties - * are common. Compatible line is declared in device dts. - */ - display_panel: panel@0 { - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - vddio-supply = <&vreg_l14a_1p88>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - -&gcc { - protected-clocks = , - , - , - , - ; -}; - -&gpu { - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; - }; -}; - -&i2c12 { - status = "okay"; - clock-frequency = <400000>; - - synaptics-rmi4-i2c@20 { - compatible = "syna,rmi4-i2c"; - reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_default_pins>; - - vdd-supply = <&vreg_l28a_3p0>; - vio-supply = <&ts_1p8_supply>; - - syna,reset-delay-ms = <200>; - syna,startup-delay-ms = <200>; - - rmi4-f01@1 { - reg = <0x01>; - syna,nosleep-mode = <1>; - }; - - rmi4_f12: rmi4-f12@12 { - reg = <0x12>; - touchscreen-x-mm = <68>; - touchscreen-y-mm = <144>; - syna,sensor-type = <1>; - syna,rezero-wait-ms = <200>; - }; - }; -}; - -&mdss { - status = "okay"; -}; - -&mdss_mdp { - status = "okay"; -}; - -/* Modem/wifi*/ -&mss_pil { - status = "okay"; - firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; -}; - -&pm8998_gpio { - volume_down_gpio: pm8998_gpio5 { - pinconf { - pins = "gpio5"; - function = "normal"; - input-enable; - bias-pull-up; - qcom,drive-strength = <0>; - }; - }; - - volume_up_gpio: pm8998_gpio6 { - pinconf { - pins = "gpio6"; - function = "normal"; - input-enable; - bias-pull-up; - qcom,drive-strength = <0>; - }; - }; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qup_i2c12_default { - mux { - pins = "gpio49", "gpio50"; - function = "qup12"; - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; - - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; -}; - -/* - * Prevent garbage data on bluetooth UART lines - */ -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-pull-down; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; - -&uart6 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn3990-bt"; - - /* - * This path is relative to the qca/ - * subdir under lib/firmware. - */ - firmware-name = "oneplus6/crnv21.bin"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - }; -}; - -&ufs_mem_hc { - status = "okay"; - - reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l20a_2p95>; - vcc-max-microamp = <600000>; -}; - -&ufs_mem_phy { - status = "okay"; - - vdda-phy-supply = <&vdda_ufs1_core>; - vdda-pll-supply = <&vdda_ufs1_1p2>; -}; - -&usb_1 { - status = "okay"; - - /* - * disable USB3 clock requirement as the device only supports - * USB2. - */ - qcom,select-utmi-as-pipe-clk; -}; - -&usb_1_dwc3 { - /* - * We don't have the capability to switch modes yet. - */ - dr_mode = "peripheral"; - - /* fastest mode for USB 2 */ - maximum-speed = "high-speed"; - - /* Remove USB3 phy as it's unused on this device. */ - phys = <&usb_1_hsphy>; - phy-names = "usb2-phy"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdd-supply = <&vdda_usb1_ss_core>; - vdda-pll-supply = <&vdda_qusb_hs0_1p8>; - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; - qcom,preemphasis-level = ; - qcom,preemphasis-width = ; -}; - -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; - - tri_state_key_default: tri_state_key_default { - mux { - pins = "gpio40", "gpio42", "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - }; - - ts_default_pins: ts-int { - mux { - pins = "gpio99", "gpio125"; - function = "gpio"; - drive-strength = <16>; - bias-pull-up; - }; - }; - - panel_reset_pins: panel-reset { - mux { - pins = "gpio6", "gpio25", "gpio26"; - function = "gpio"; - drive-strength = <8>; - bias-disable = <0>; - }; - }; - - panel_te_pin: panel-te { - mux { - pins = "gpio10"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - - panel_esd_pin: panel-esd { - mux { - pins = "gpio30"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; - }; -}; - -&wifi { - status = "okay"; - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - - qcom,snoc-host-cap-8bit-quirk; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts deleted file mode 100644 index 72842c887..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SDM845 OnePlus 6 (enchilada) device tree. - * - * Copyright (c) 2020, The Linux Foundation. All rights reserved. - */ - -#include "sdm845-oneplus-common.dtsi" - -/ { - model = "OnePlus 6"; - compatible = "oneplus,enchilada", "qcom,sdm845"; -}; - -&display_panel { - status = "okay"; - - compatible = "samsung,sofef00"; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts deleted file mode 100644 index 969b36dc9..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SDM845 OnePlus 6T (fajita) device tree. - * - * Copyright (c) 2020, The Linux Foundation. All rights reserved. - */ - -#include "sdm845-oneplus-common.dtsi" - -/ { - model = "OnePlus 6T"; - compatible = "oneplus,fajita", "qcom,sdm845"; -}; - -&display_panel { - status = "okay"; - - compatible = "samsung,s6e3fc2x01"; -}; - -&rmi4_f12 { - touchscreen-y-mm = <148>; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts deleted file mode 100644 index 86cbae63e..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ /dev/null @@ -1,380 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -/dts-v1/; - -#include -#include -#include -#include "sdm845.dtsi" -#include "pm8998.dtsi" -#include "pmi8998.dtsi" - -/* - * Delete following upstream (sdm845.dtsi) reserved - * memory mappings which are different in this device. - */ -/delete-node/ &tz_mem; -/delete-node/ &adsp_mem; -/delete-node/ &wlan_msa_mem; -/delete-node/ &mpss_region; -/delete-node/ &venus_mem; -/delete-node/ &cdsp_mem; -/delete-node/ &mba_region; -/delete-node/ &slpi_mem; -/delete-node/ &spss_mem; -/delete-node/ &rmtfs_mem; - -/ { - model = "Xiaomi Pocophone F1"; - compatible = "xiaomi,beryllium", "qcom,sdm845"; - - /* required for bootloader to select correct board */ - qcom,board-id = <69 0>; - qcom,msm-id = <321 0x20001>; - - aliases { - hsuart0 = &uart6; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&vol_up_pin_a>; - - vol-up { - label = "Volume Up"; - linux,code = ; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; - }; - }; - - /* Reserved memory changes from downstream */ - reserved-memory { - tz_mem: memory@86200000 { - reg = <0 0x86200000 0 0x4900000>; - no-map; - }; - - adsp_mem: memory@8c500000 { - reg = <0 0x8c500000 0 0x1e00000>; - no-map; - }; - - wlan_msa_mem: memory@8e300000 { - reg = <0 0x8e300000 0 0x100000>; - no-map; - }; - - mpss_region: memory@8e400000 { - reg = <0 0x8e400000 0 0x7800000>; - no-map; - }; - - venus_mem: memory@95c00000 { - reg = <0 0x95c00000 0 0x500000>; - no-map; - }; - - cdsp_mem: memory@96100000 { - reg = <0 0x96100000 0 0x800000>; - no-map; - }; - - mba_region: memory@96900000 { - reg = <0 0x96900000 0 0x200000>; - no-map; - }; - - slpi_mem: memory@96b00000 { - reg = <0 0x96b00000 0 0x1400000>; - no-map; - }; - - spss_mem: memory@97f00000 { - reg = <0 0x97f00000 0 0x100000>; - no-map; - }; - - rmtfs_mem: memory@f6301000 { - compatible = "qcom,rmtfs-mem"; - reg = <0 0xf6301000 0 0x200000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = <15>; - }; - }; - - vreg_s4a_1p8: vreg-s4a-1p8 { - compatible = "regulator-fixed"; - regulator-name = "vreg_s4a_1p8"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; -}; - -&adsp_pas { - status = "okay"; - firmware-name = "qcom/sdm845/adsp.mdt"; -}; - -&apps_rsc { - pm8998-rpmh-regulators { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - - vreg_l1a_0p875: ldo1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = ; - }; - - vreg_l5a_0p8: ldo5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = ; - }; - - vreg_l7a_1p8: ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l12a_1p8: ldo12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l13a_2p95: ldo13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l17a_1p3: ldo17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - }; - - vreg_l20a_2p95: ldo20 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2968000>; - regulator-initial-mode = ; - }; - - vreg_l21a_2p95: ldo21 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2968000>; - regulator-initial-mode = ; - }; - - vreg_l24a_3p075: ldo24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - regulator-initial-mode = ; - }; - - vreg_l25a_3p3: ldo25 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vreg_l26a_1p2: ldo26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - }; -}; - -&cdsp_pas { - status = "okay"; - firmware-name = "qcom/sdm845/cdsp.mdt"; -}; - -&gcc { - protected-clocks = , - , - , - , - ; -}; - -&gpu { - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; -}; - -&mss_pil { - status = "okay"; - firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt"; -}; - -&pm8998_gpio { - vol_up_pin_a: vol-up-active { - pins = "gpio6"; - function = "normal"; - input-enable; - bias-pull-up; - qcom,drive-strength = ; - }; -}; - -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = ; - }; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; - - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - - bus-width = <4>; - cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; -}; - -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; - - sdc2_default_state: sdc2-default { - clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - }; - - sdc2_card_det_n: sd-card-det-n { - pins = "gpio126"; - function = "gpio"; - bias-pull-up; - }; -}; - -&uart6 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - }; -}; - -&ufs_mem_hc { - status = "okay"; - - reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l20a_2p95>; - vcc-max-microamp = <800000>; -}; - -&ufs_mem_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdd-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; - qcom,preemphasis-level = ; - qcom,preemphasis-width = ; -}; - -&usb_1_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l26a_1p2>; - vdda-pll-supply = <&vreg_l1a_0p875>; -}; - -&wifi { - status = "okay"; - - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; -}; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-disable; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi deleted file mode 100644 index 454f794af..000000000 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ /dev/null @@ -1,5356 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SDM845 SoC device tree source - * - * Copyright (c) 2018, The Linux Foundation. All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - - #address-cells = <2>; - #size-cells = <2>; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c7; - i2c8 = &i2c8; - i2c9 = &i2c9; - i2c10 = &i2c10; - i2c11 = &i2c11; - i2c12 = &i2c12; - i2c13 = &i2c13; - i2c14 = &i2c14; - i2c15 = &i2c15; - spi0 = &spi0; - spi1 = &spi1; - spi2 = &spi2; - spi3 = &spi3; - spi4 = &spi4; - spi5 = &spi5; - spi6 = &spi6; - spi7 = &spi7; - spi8 = &spi8; - spi9 = &spi9; - spi10 = &spi10; - spi11 = &spi11; - spi12 = &spi12; - spi13 = &spi13; - spi14 = &spi14; - spi15 = &spi15; - }; - - chosen { }; - - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x80000000 0 0>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hyp_mem: memory@85700000 { - reg = <0 0x85700000 0 0x600000>; - no-map; - }; - - xbl_mem: memory@85e00000 { - reg = <0 0x85e00000 0 0x100000>; - no-map; - }; - - aop_mem: memory@85fc0000 { - reg = <0 0x85fc0000 0 0x20000>; - no-map; - }; - - aop_cmd_db_mem: memory@85fe0000 { - compatible = "qcom,cmd-db"; - reg = <0x0 0x85fe0000 0 0x20000>; - no-map; - }; - - smem_mem: memory@86000000 { - reg = <0x0 0x86000000 0 0x200000>; - no-map; - }; - - tz_mem: memory@86200000 { - reg = <0 0x86200000 0 0x2d00000>; - no-map; - }; - - rmtfs_mem: memory@88f00000 { - compatible = "qcom,rmtfs-mem"; - reg = <0 0x88f00000 0 0x200000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = <15>; - }; - - qseecom_mem: memory@8ab00000 { - reg = <0 0x8ab00000 0 0x1400000>; - no-map; - }; - - camera_mem: memory@8bf00000 { - reg = <0 0x8bf00000 0 0x500000>; - no-map; - }; - - ipa_fw_mem: memory@8c400000 { - reg = <0 0x8c400000 0 0x10000>; - no-map; - }; - - ipa_gsi_mem: memory@8c410000 { - reg = <0 0x8c410000 0 0x5000>; - no-map; - }; - - gpu_mem: memory@8c415000 { - reg = <0 0x8c415000 0 0x2000>; - no-map; - }; - - adsp_mem: memory@8c500000 { - reg = <0 0x8c500000 0 0x1a00000>; - no-map; - }; - - wlan_msa_mem: memory@8df00000 { - reg = <0 0x8df00000 0 0x100000>; - no-map; - }; - - mpss_region: memory@8e000000 { - reg = <0 0x8e000000 0 0x7800000>; - no-map; - }; - - venus_mem: memory@95800000 { - reg = <0 0x95800000 0 0x500000>; - no-map; - }; - - cdsp_mem: memory@95d00000 { - reg = <0 0x95d00000 0 0x800000>; - no-map; - }; - - mba_region: memory@96500000 { - reg = <0 0x96500000 0 0x200000>; - no-map; - }; - - slpi_mem: memory@96700000 { - reg = <0 0x96700000 0 0x1400000>; - no-map; - }; - - spss_mem: memory@97b00000 { - reg = <0 0x97b00000 0 0x100000>; - no-map; - }; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x0>; - enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; - qcom,freq-domain = <&cpufreq_hw 0>; - operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - #cooling-cells = <2>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; - L3_0: l3-cache { - compatible = "cache"; - }; - }; - }; - - CPU1: cpu@100 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x100>; - enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; - qcom,freq-domain = <&cpufreq_hw 0>; - operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - #cooling-cells = <2>; - next-level-cache = <&L2_100>; - L2_100: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; - }; - }; - - CPU2: cpu@200 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x200>; - enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; - qcom,freq-domain = <&cpufreq_hw 0>; - operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - #cooling-cells = <2>; - next-level-cache = <&L2_200>; - L2_200: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; - }; - }; - - CPU3: cpu@300 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x300>; - enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; - qcom,freq-domain = <&cpufreq_hw 0>; - operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - #cooling-cells = <2>; - next-level-cache = <&L2_300>; - L2_300: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; - }; - }; - - CPU4: cpu@400 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x400>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - #cooling-cells = <2>; - next-level-cache = <&L2_400>; - L2_400: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; - }; - }; - - CPU5: cpu@500 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x500>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - #cooling-cells = <2>; - next-level-cache = <&L2_500>; - L2_500: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; - }; - }; - - CPU6: cpu@600 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x600>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - #cooling-cells = <2>; - next-level-cache = <&L2_600>; - L2_600: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; - }; - }; - - CPU7: cpu@700 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x700>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - #cooling-cells = <2>; - next-level-cache = <&L2_700>; - L2_700: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; - }; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - - core1 { - cpu = <&CPU1>; - }; - - core2 { - cpu = <&CPU2>; - }; - - core3 { - cpu = <&CPU3>; - }; - - core4 { - cpu = <&CPU4>; - }; - - core5 { - cpu = <&CPU5>; - }; - - core6 { - cpu = <&CPU6>; - }; - - core7 { - cpu = <&CPU7>; - }; - }; - }; - - idle-states { - entry-method = "psci"; - - LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { - compatible = "arm,idle-state"; - idle-state-name = "little-power-down"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <350>; - exit-latency-us = <461>; - min-residency-us = <1890>; - local-timer-stop; - }; - - LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { - compatible = "arm,idle-state"; - idle-state-name = "little-rail-power-down"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <360>; - exit-latency-us = <531>; - min-residency-us = <3934>; - local-timer-stop; - }; - - BIG_CPU_SLEEP_0: cpu-sleep-1-0 { - compatible = "arm,idle-state"; - idle-state-name = "big-power-down"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <264>; - exit-latency-us = <621>; - min-residency-us = <952>; - local-timer-stop; - }; - - BIG_CPU_SLEEP_1: cpu-sleep-1-1 { - compatible = "arm,idle-state"; - idle-state-name = "big-rail-power-down"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <702>; - exit-latency-us = <1061>; - min-residency-us = <4488>; - local-timer-stop; - }; - - CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; - idle-state-name = "cluster-power-down"; - arm,psci-suspend-param = <0x400000F4>; - entry-latency-us = <3263>; - exit-latency-us = <6562>; - min-residency-us = <9987>; - local-timer-stop; - }; - }; - }; - - cpu0_opp_table: cpu0_opp_table { - compatible = "operating-points-v2"; - opp-shared; - - cpu0_opp1: opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-peak-kBps = <800000 4800000>; - }; - - cpu0_opp2: opp-403200000 { - opp-hz = /bits/ 64 <403200000>; - opp-peak-kBps = <800000 4800000>; - }; - - cpu0_opp3: opp-480000000 { - opp-hz = /bits/ 64 <480000000>; - opp-peak-kBps = <800000 6451200>; - }; - - cpu0_opp4: opp-576000000 { - opp-hz = /bits/ 64 <576000000>; - opp-peak-kBps = <800000 6451200>; - }; - - cpu0_opp5: opp-652800000 { - opp-hz = /bits/ 64 <652800000>; - opp-peak-kBps = <800000 7680000>; - }; - - cpu0_opp6: opp-748800000 { - opp-hz = /bits/ 64 <748800000>; - opp-peak-kBps = <1804000 9216000>; - }; - - cpu0_opp7: opp-825600000 { - opp-hz = /bits/ 64 <825600000>; - opp-peak-kBps = <1804000 9216000>; - }; - - cpu0_opp8: opp-902400000 { - opp-hz = /bits/ 64 <902400000>; - opp-peak-kBps = <1804000 10444800>; - }; - - cpu0_opp9: opp-979200000 { - opp-hz = /bits/ 64 <979200000>; - opp-peak-kBps = <1804000 11980800>; - }; - - cpu0_opp10: opp-1056000000 { - opp-hz = /bits/ 64 <1056000000>; - opp-peak-kBps = <1804000 11980800>; - }; - - cpu0_opp11: opp-1132800000 { - opp-hz = /bits/ 64 <1132800000>; - opp-peak-kBps = <2188000 13516800>; - }; - - cpu0_opp12: opp-1228800000 { - opp-hz = /bits/ 64 <1228800000>; - opp-peak-kBps = <2188000 15052800>; - }; - - cpu0_opp13: opp-1324800000 { - opp-hz = /bits/ 64 <1324800000>; - opp-peak-kBps = <2188000 16588800>; - }; - - cpu0_opp14: opp-1420800000 { - opp-hz = /bits/ 64 <1420800000>; - opp-peak-kBps = <3072000 18124800>; - }; - - cpu0_opp15: opp-1516800000 { - opp-hz = /bits/ 64 <1516800000>; - opp-peak-kBps = <3072000 19353600>; - }; - - cpu0_opp16: opp-1612800000 { - opp-hz = /bits/ 64 <1612800000>; - opp-peak-kBps = <4068000 19353600>; - }; - - cpu0_opp17: opp-1689600000 { - opp-hz = /bits/ 64 <1689600000>; - opp-peak-kBps = <4068000 20889600>; - }; - - cpu0_opp18: opp-1766400000 { - opp-hz = /bits/ 64 <1766400000>; - opp-peak-kBps = <4068000 22425600>; - }; - }; - - cpu4_opp_table: cpu4_opp_table { - compatible = "operating-points-v2"; - opp-shared; - - cpu4_opp1: opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-peak-kBps = <800000 4800000>; - }; - - cpu4_opp2: opp-403200000 { - opp-hz = /bits/ 64 <403200000>; - opp-peak-kBps = <800000 4800000>; - }; - - cpu4_opp3: opp-480000000 { - opp-hz = /bits/ 64 <480000000>; - opp-peak-kBps = <1804000 4800000>; - }; - - cpu4_opp4: opp-576000000 { - opp-hz = /bits/ 64 <576000000>; - opp-peak-kBps = <1804000 4800000>; - }; - - cpu4_opp5: opp-652800000 { - opp-hz = /bits/ 64 <652800000>; - opp-peak-kBps = <1804000 4800000>; - }; - - cpu4_opp6: opp-748800000 { - opp-hz = /bits/ 64 <748800000>; - opp-peak-kBps = <1804000 4800000>; - }; - - cpu4_opp7: opp-825600000 { - opp-hz = /bits/ 64 <825600000>; - opp-peak-kBps = <2188000 9216000>; - }; - - cpu4_opp8: opp-902400000 { - opp-hz = /bits/ 64 <902400000>; - opp-peak-kBps = <2188000 9216000>; - }; - - cpu4_opp9: opp-979200000 { - opp-hz = /bits/ 64 <979200000>; - opp-peak-kBps = <2188000 9216000>; - }; - - cpu4_opp10: opp-1056000000 { - opp-hz = /bits/ 64 <1056000000>; - opp-peak-kBps = <3072000 9216000>; - }; - - cpu4_opp11: opp-1132800000 { - opp-hz = /bits/ 64 <1132800000>; - opp-peak-kBps = <3072000 11980800>; - }; - - cpu4_opp12: opp-1209600000 { - opp-hz = /bits/ 64 <1209600000>; - opp-peak-kBps = <4068000 11980800>; - }; - - cpu4_opp13: opp-1286400000 { - opp-hz = /bits/ 64 <1286400000>; - opp-peak-kBps = <4068000 11980800>; - }; - - cpu4_opp14: opp-1363200000 { - opp-hz = /bits/ 64 <1363200000>; - opp-peak-kBps = <4068000 15052800>; - }; - - cpu4_opp15: opp-1459200000 { - opp-hz = /bits/ 64 <1459200000>; - opp-peak-kBps = <4068000 15052800>; - }; - - cpu4_opp16: opp-1536000000 { - opp-hz = /bits/ 64 <1536000000>; - opp-peak-kBps = <5412000 15052800>; - }; - - cpu4_opp17: opp-1612800000 { - opp-hz = /bits/ 64 <1612800000>; - opp-peak-kBps = <5412000 15052800>; - }; - - cpu4_opp18: opp-1689600000 { - opp-hz = /bits/ 64 <1689600000>; - opp-peak-kBps = <5412000 19353600>; - }; - - cpu4_opp19: opp-1766400000 { - opp-hz = /bits/ 64 <1766400000>; - opp-peak-kBps = <6220000 19353600>; - }; - - cpu4_opp20: opp-1843200000 { - opp-hz = /bits/ 64 <1843200000>; - opp-peak-kBps = <6220000 19353600>; - }; - - cpu4_opp21: opp-1920000000 { - opp-hz = /bits/ 64 <1920000000>; - opp-peak-kBps = <7216000 19353600>; - }; - - cpu4_opp22: opp-1996800000 { - opp-hz = /bits/ 64 <1996800000>; - opp-peak-kBps = <7216000 20889600>; - }; - - cpu4_opp23: opp-2092800000 { - opp-hz = /bits/ 64 <2092800000>; - opp-peak-kBps = <7216000 20889600>; - }; - - cpu4_opp24: opp-2169600000 { - opp-hz = /bits/ 64 <2169600000>; - opp-peak-kBps = <7216000 20889600>; - }; - - cpu4_opp25: opp-2246400000 { - opp-hz = /bits/ 64 <2246400000>; - opp-peak-kBps = <7216000 20889600>; - }; - - cpu4_opp26: opp-2323200000 { - opp-hz = /bits/ 64 <2323200000>; - opp-peak-kBps = <7216000 20889600>; - }; - - cpu4_opp27: opp-2400000000 { - opp-hz = /bits/ 64 <2400000000>; - opp-peak-kBps = <7216000 22425600>; - }; - - cpu4_opp28: opp-2476800000 { - opp-hz = /bits/ 64 <2476800000>; - opp-peak-kBps = <7216000 22425600>; - }; - - cpu4_opp29: opp-2553600000 { - opp-hz = /bits/ 64 <2553600000>; - opp-peak-kBps = <7216000 22425600>; - }; - - cpu4_opp30: opp-2649600000 { - opp-hz = /bits/ 64 <2649600000>; - opp-peak-kBps = <7216000 22425600>; - }; - - cpu4_opp31: opp-2745600000 { - opp-hz = /bits/ 64 <2745600000>; - opp-peak-kBps = <7216000 25497600>; - }; - - cpu4_opp32: opp-2803200000 { - opp-hz = /bits/ 64 <2803200000>; - opp-peak-kBps = <7216000 25497600>; - }; - }; - - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = ; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <38400000>; - clock-output-names = "xo_board"; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32764>; - }; - }; - - firmware { - scm { - compatible = "qcom,scm-sdm845", "qcom,scm"; - }; - }; - - adsp_pas: remoteproc-adsp { - compatible = "qcom,sdm845-adsp-pas"; - - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - memory-region = <&adsp_mem>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - label = "lpass"; - qcom,remote-pid = <2>; - mboxes = <&apss_shared 8>; - - apr { - compatible = "qcom,apr-v2"; - qcom,glink-channels = "apr_audio_svc"; - qcom,apr-domain = ; - #address-cells = <1>; - #size-cells = <0>; - qcom,intents = <512 20>; - - apr-service@3 { - reg = ; - compatible = "qcom,q6core"; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - }; - - q6afe: apr-service@4 { - compatible = "qcom,q6afe"; - reg = ; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - q6afedai: dais { - compatible = "qcom,q6afe-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - }; - }; - - q6asm: apr-service@7 { - compatible = "qcom,q6asm"; - reg = ; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - q6asmdai: dais { - compatible = "qcom,q6asm-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - iommus = <&apps_smmu 0x1821 0x0>; - }; - }; - - q6adm: apr-service@8 { - compatible = "qcom,q6adm"; - reg = ; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - q6routing: routing { - compatible = "qcom,q6adm-routing"; - #sound-dai-cells = <0>; - }; - }; - }; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1823 0x0>; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1824 0x0>; - }; - }; - }; - }; - - cdsp_pas: remoteproc-cdsp { - compatible = "qcom,sdm845-cdsp-pas"; - - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - memory-region = <&cdsp_mem>; - - qcom,smem-states = <&cdsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - label = "turing"; - qcom,remote-pid = <5>; - mboxes = <&apss_shared 4>; - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "cdsp"; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - iommus = <&apps_smmu 0x1401 0x30>; - }; - - compute-cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - iommus = <&apps_smmu 0x1402 0x30>; - }; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1403 0x30>; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1404 0x30>; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1405 0x30>; - }; - - compute-cb@6 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <6>; - iommus = <&apps_smmu 0x1406 0x30>; - }; - - compute-cb@7 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <7>; - iommus = <&apps_smmu 0x1407 0x30>; - }; - - compute-cb@8 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <8>; - iommus = <&apps_smmu 0x1408 0x30>; - }; - }; - }; - }; - - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - - smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; - }; - - smp2p-cdsp { - compatible = "qcom,smp2p"; - qcom,smem = <94>, <432>; - - interrupts = ; - - mboxes = <&apss_shared 6>; - - qcom,local-pid = <0>; - qcom,remote-pid = <5>; - - cdsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - cdsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-lpass { - compatible = "qcom,smp2p"; - qcom,smem = <443>, <429>; - - interrupts = ; - - mboxes = <&apss_shared 10>; - - qcom,local-pid = <0>; - qcom,remote-pid = <2>; - - adsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - adsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-mpss { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; - interrupts = ; - mboxes = <&apss_shared 14>; - qcom,local-pid = <0>; - qcom,remote-pid = <1>; - - modem_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - modem_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - ipa_smp2p_out: ipa-ap-to-modem { - qcom,entry-name = "ipa"; - #qcom,smem-state-cells = <1>; - }; - - ipa_smp2p_in: ipa-modem-to-ap { - qcom,entry-name = "ipa"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-slpi { - compatible = "qcom,smp2p"; - qcom,smem = <481>, <430>; - interrupts = ; - mboxes = <&apss_shared 26>; - qcom,local-pid = <0>; - qcom,remote-pid = <3>; - - slpi_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - slpi_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - soc: soc@0 { - #address-cells = <2>; - #size-cells = <2>; - ranges = <0 0 0 0 0x10 0>; - dma-ranges = <0 0 0 0 0x10 0>; - compatible = "simple-bus"; - - gcc: clock-controller@100000 { - compatible = "qcom,gcc-sdm845"; - reg = <0 0x00100000 0 0x1f0000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - qfprom@784000 { - compatible = "qcom,qfprom"; - reg = <0 0x00784000 0 0x8ff>; - #address-cells = <1>; - #size-cells = <1>; - - qusb2p_hstx_trim: hstx-trim-primary@1eb { - reg = <0x1eb 0x1>; - bits = <1 4>; - }; - - qusb2s_hstx_trim: hstx-trim-secondary@1eb { - reg = <0x1eb 0x2>; - bits = <6 4>; - }; - }; - - rng: rng@793000 { - compatible = "qcom,prng-ee"; - reg = <0 0x00793000 0 0x1000>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; - clock-names = "core"; - }; - - qup_opp_table: qup-opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-128000000 { - opp-hz = /bits/ 64 <128000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - qupv3_id_0: geniqup@8c0000 { - compatible = "qcom,geni-se-qup"; - reg = <0 0x008c0000 0 0x6000>; - clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - iommus = <&apps_smmu 0x3 0x0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core"; - status = "disabled"; - - i2c0: i2c@880000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00880000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c0_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi0: spi@880000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00880000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi0_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart0: serial@880000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00880000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart0_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c1: i2c@884000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00884000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c1_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi1: spi@884000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00884000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi1_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart1: serial@884000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00884000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart1_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c2: i2c@888000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00888000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c2_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi2: spi@888000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00888000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi2_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart2: serial@888000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00888000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart2_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c3: i2c@88c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x0088c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c3_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi3: spi@88c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x0088c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi3_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart3: serial@88c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x0088c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart3_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c4: i2c@890000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00890000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c4_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi4: spi@890000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00890000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi4_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart4: serial@890000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00890000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart4_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c5: i2c@894000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00894000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c5_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi5: spi@894000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00894000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi5_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart5: serial@894000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00894000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart5_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c6: i2c@898000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00898000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c6_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi6: spi@898000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00898000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi6_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart6: serial@898000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00898000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart6_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c7: i2c@89c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x0089c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c7_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - spi7: spi@89c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x0089c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi7_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart7: serial@89c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x0089c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart7_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - }; - - qupv3_id_1: geniqup@ac0000 { - compatible = "qcom,geni-se-qup"; - reg = <0 0x00ac0000 0 0x6000>; - clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; - iommus = <&apps_smmu 0x6c3 0x0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core"; - status = "disabled"; - - i2c8: i2c@a80000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a80000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c8_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi8: spi@a80000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a80000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi8_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart8: serial@a80000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a80000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart8_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c9: i2c@a84000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a84000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c9_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi9: spi@a84000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a84000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi9_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart9: serial@a84000 { - compatible = "qcom,geni-debug-uart"; - reg = <0 0x00a84000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart9_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c10: i2c@a88000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a88000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c10_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi10: spi@a88000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a88000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi10_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart10: serial@a88000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a88000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart10_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c11: i2c@a8c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a8c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c11_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi11: spi@a8c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a8c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi11_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart11: serial@a8c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a8c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart11_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c12: i2c@a90000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a90000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c12_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi12: spi@a90000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a90000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi12_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart12: serial@a90000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a90000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart12_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c13: i2c@a94000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a94000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c13_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi13: spi@a94000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a94000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi13_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart13: serial@a94000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a94000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart13_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c14: i2c@a98000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a98000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c14_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - status = "disabled"; - }; - - spi14: spi@a98000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a98000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi14_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart14: serial@a98000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a98000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart14_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c15: i2c@a9c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a9c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c15_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - }; - - spi15: spi@a9c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a9c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi15_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - uart15: serial@a9c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a9c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart15_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - }; - - system-cache-controller@1100000 { - compatible = "qcom,sdm845-llcc"; - reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; - interrupts = ; - }; - - pcie0: pci@1c00000 { - compatible = "qcom,pcie-sdm845", "snps,dw-pcie"; - reg = <0 0x01c00000 0 0x2000>, - <0 0x60000000 0 0xf1d>, - <0 0x60000f20 0 0xa8>, - <0 0x60100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - - #address-cells = <3>; - #size-cells = <2>; - - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>; - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a", - "tbu"; - - iommus = <&apps_smmu 0x1c10 0xf>; - iommu-map = <0x0 &apps_smmu 0x1c10 0x1>, - <0x100 &apps_smmu 0x1c11 0x1>, - <0x200 &apps_smmu 0x1c12 0x1>, - <0x300 &apps_smmu 0x1c13 0x1>, - <0x400 &apps_smmu 0x1c14 0x1>, - <0x500 &apps_smmu 0x1c15 0x1>, - <0x600 &apps_smmu 0x1c16 0x1>, - <0x700 &apps_smmu 0x1c17 0x1>, - <0x800 &apps_smmu 0x1c18 0x1>, - <0x900 &apps_smmu 0x1c19 0x1>, - <0xa00 &apps_smmu 0x1c1a 0x1>, - <0xb00 &apps_smmu 0x1c1b 0x1>, - <0xc00 &apps_smmu 0x1c1c 0x1>, - <0xd00 &apps_smmu 0x1c1d 0x1>, - <0xe00 &apps_smmu 0x1c1e 0x1>, - <0xf00 &apps_smmu 0x1c1f 0x1>; - - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "pci"; - - power-domains = <&gcc PCIE_0_GDSC>; - - phys = <&pcie0_lane>; - phy-names = "pciephy"; - - status = "disabled"; - }; - - pcie0_phy: phy@1c06000 { - compatible = "qcom,sdm845-qmp-pcie-phy"; - reg = <0 0x01c06000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; - - resets = <&gcc GCC_PCIE_0_PHY_BCR>; - reset-names = "phy"; - - assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - assigned-clock-rates = <100000000>; - - status = "disabled"; - - pcie0_lane: lanes@1c06200 { - reg = <0 0x01c06200 0 0x128>, - <0 0x01c06400 0 0x1fc>, - <0 0x01c06800 0 0x218>, - <0 0x01c06600 0 0x70>; - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - }; - }; - - pcie1: pci@1c08000 { - compatible = "qcom,pcie-sdm845", "snps,dw-pcie"; - reg = <0 0x01c08000 0 0x2000>, - <0 0x40000000 0 0xf1d>, - <0 0x40000f20 0 0xa8>, - <0 0x40100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "config"; - device_type = "pci"; - linux,pci-domain = <1>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - - #address-cells = <3>; - #size-cells = <2>; - - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a", - "ref", - "tbu"; - - assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; - assigned-clock-rates = <19200000>; - - iommus = <&apps_smmu 0x1c00 0xf>; - iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, - <0x100 &apps_smmu 0x1c01 0x1>, - <0x200 &apps_smmu 0x1c02 0x1>, - <0x300 &apps_smmu 0x1c03 0x1>, - <0x400 &apps_smmu 0x1c04 0x1>, - <0x500 &apps_smmu 0x1c05 0x1>, - <0x600 &apps_smmu 0x1c06 0x1>, - <0x700 &apps_smmu 0x1c07 0x1>, - <0x800 &apps_smmu 0x1c08 0x1>, - <0x900 &apps_smmu 0x1c09 0x1>, - <0xa00 &apps_smmu 0x1c0a 0x1>, - <0xb00 &apps_smmu 0x1c0b 0x1>, - <0xc00 &apps_smmu 0x1c0c 0x1>, - <0xd00 &apps_smmu 0x1c0d 0x1>, - <0xe00 &apps_smmu 0x1c0e 0x1>, - <0xf00 &apps_smmu 0x1c0f 0x1>; - - resets = <&gcc GCC_PCIE_1_BCR>; - reset-names = "pci"; - - power-domains = <&gcc PCIE_1_GDSC>; - - phys = <&pcie1_lane>; - phy-names = "pciephy"; - - status = "disabled"; - }; - - pcie1_phy: phy@1c0a000 { - compatible = "qcom,sdm845-qhp-pcie-phy"; - reg = <0 0x01c0a000 0 0x800>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; - - resets = <&gcc GCC_PCIE_1_PHY_BCR>; - reset-names = "phy"; - - assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - assigned-clock-rates = <100000000>; - - status = "disabled"; - - pcie1_lane: lanes@1c06200 { - reg = <0 0x01c0a800 0 0x800>, - <0 0x01c0a800 0 0x800>, - <0 0x01c0b800 0 0x400>; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; - }; - - mem_noc: interconnect@1380000 { - compatible = "qcom,sdm845-mem-noc"; - reg = <0 0x01380000 0 0x27200>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - dc_noc: interconnect@14e0000 { - compatible = "qcom,sdm845-dc-noc"; - reg = <0 0x014e0000 0 0x400>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - config_noc: interconnect@1500000 { - compatible = "qcom,sdm845-config-noc"; - reg = <0 0x01500000 0 0x5080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - system_noc: interconnect@1620000 { - compatible = "qcom,sdm845-system-noc"; - reg = <0 0x01620000 0 0x18080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - aggre1_noc: interconnect@16e0000 { - compatible = "qcom,sdm845-aggre1-noc"; - reg = <0 0x016e0000 0 0x15080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - aggre2_noc: interconnect@1700000 { - compatible = "qcom,sdm845-aggre2-noc"; - reg = <0 0x01700000 0 0x1f300>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - mmss_noc: interconnect@1740000 { - compatible = "qcom,sdm845-mmss-noc"; - reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - ufs_mem_hc: ufshc@1d84000 { - compatible = "qcom,sdm845-ufshc", "qcom,ufshc", - "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x2500>, - <0 0x01d90000 0 0x8000>; - reg-names = "std", "ice"; - interrupts = ; - phys = <&ufs_mem_phy_lanes>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - power-domains = <&gcc UFS_PHY_GDSC>; - #reset-cells = <1>; - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; - - iommus = <&apps_smmu 0x100 0xf>; - - clock-names = - "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk", - "ice_core_clk"; - clocks = - <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, - <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>, - <0 300000000>; - - status = "disabled"; - }; - - ufs_mem_phy: phy@1d87000 { - compatible = "qcom,sdm845-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clock-names = "ref", - "ref_aux"; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - status = "disabled"; - - ufs_mem_phy_lanes: lanes@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - }; - }; - - cryptobam: dma@1dc4000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0 0x01dc4000 0 0x24000>; - interrupts = ; - clocks = <&rpmhcc 15>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - qcom,controlled-remotely = <1>; - iommus = <&apps_smmu 0x704 0x1>, - <&apps_smmu 0x706 0x1>, - <&apps_smmu 0x714 0x1>, - <&apps_smmu 0x716 0x1>; - }; - - crypto: crypto@1dfa000 { - compatible = "qcom,crypto-v5.4"; - reg = <0 0x01dfa000 0 0x6000>; - clocks = <&gcc GCC_CE1_AHB_CLK>, - <&gcc GCC_CE1_AHB_CLK>, - <&rpmhcc 15>; - clock-names = "iface", "bus", "core"; - dmas = <&cryptobam 6>, <&cryptobam 7>; - dma-names = "rx", "tx"; - iommus = <&apps_smmu 0x704 0x1>, - <&apps_smmu 0x706 0x1>, - <&apps_smmu 0x714 0x1>, - <&apps_smmu 0x716 0x1>; - }; - - ipa: ipa@1e40000 { - compatible = "qcom,sdm845-ipa"; - - iommus = <&apps_smmu 0x720 0x0>, - <&apps_smmu 0x722 0x0>; - reg = <0 0x1e40000 0 0x7000>, - <0 0x1e47000 0 0x2000>, - <0 0x1e04000 0 0x2c000>; - reg-names = "ipa-reg", - "ipa-shared", - "gsi"; - - interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, - <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, - <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ipa", - "gsi", - "ipa-clock-query", - "ipa-setup-ready"; - - clocks = <&rpmhcc RPMH_IPA_CLK>; - clock-names = "core"; - - interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>, - <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; - interconnect-names = "memory", - "imem", - "config"; - - qcom,smem-states = <&ipa_smp2p_out 0>, - <&ipa_smp2p_out 1>; - qcom,smem-state-names = "ipa-clock-enabled-valid", - "ipa-clock-enabled"; - - status = "disabled"; - }; - - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0 0x01f40000 0 0x40000>; - }; - - tlmm: pinctrl@3400000 { - compatible = "qcom,sdm845-pinctrl"; - reg = <0 0x03400000 0 0xc00000>; - interrupts = ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 150>; - wakeup-parent = <&pdc_intc>; - - cci0_default: cci0-default { - /* SDA, SCL */ - pins = "gpio17", "gpio18"; - function = "cci_i2c"; - - bias-pull-up; - drive-strength = <2>; /* 2 mA */ - }; - - cci0_sleep: cci0-sleep { - /* SDA, SCL */ - pins = "gpio17", "gpio18"; - function = "cci_i2c"; - - drive-strength = <2>; /* 2 mA */ - bias-pull-down; - }; - - cci1_default: cci1-default { - /* SDA, SCL */ - pins = "gpio19", "gpio20"; - function = "cci_i2c"; - - bias-pull-up; - drive-strength = <2>; /* 2 mA */ - }; - - cci1_sleep: cci1-sleep { - /* SDA, SCL */ - pins = "gpio19", "gpio20"; - function = "cci_i2c"; - - drive-strength = <2>; /* 2 mA */ - bias-pull-down; - }; - - qspi_clk: qspi-clk { - pinmux { - pins = "gpio95"; - function = "qspi_clk"; - }; - }; - - qspi_cs0: qspi-cs0 { - pinmux { - pins = "gpio90"; - function = "qspi_cs"; - }; - }; - - qspi_cs1: qspi-cs1 { - pinmux { - pins = "gpio89"; - function = "qspi_cs"; - }; - }; - - qspi_data01: qspi-data01 { - pinmux-data { - pins = "gpio91", "gpio92"; - function = "qspi_data"; - }; - }; - - qspi_data12: qspi-data12 { - pinmux-data { - pins = "gpio93", "gpio94"; - function = "qspi_data"; - }; - }; - - qup_i2c0_default: qup-i2c0-default { - pinmux { - pins = "gpio0", "gpio1"; - function = "qup0"; - }; - }; - - qup_i2c1_default: qup-i2c1-default { - pinmux { - pins = "gpio17", "gpio18"; - function = "qup1"; - }; - }; - - qup_i2c2_default: qup-i2c2-default { - pinmux { - pins = "gpio27", "gpio28"; - function = "qup2"; - }; - }; - - qup_i2c3_default: qup-i2c3-default { - pinmux { - pins = "gpio41", "gpio42"; - function = "qup3"; - }; - }; - - qup_i2c4_default: qup-i2c4-default { - pinmux { - pins = "gpio89", "gpio90"; - function = "qup4"; - }; - }; - - qup_i2c5_default: qup-i2c5-default { - pinmux { - pins = "gpio85", "gpio86"; - function = "qup5"; - }; - }; - - qup_i2c6_default: qup-i2c6-default { - pinmux { - pins = "gpio45", "gpio46"; - function = "qup6"; - }; - }; - - qup_i2c7_default: qup-i2c7-default { - pinmux { - pins = "gpio93", "gpio94"; - function = "qup7"; - }; - }; - - qup_i2c8_default: qup-i2c8-default { - pinmux { - pins = "gpio65", "gpio66"; - function = "qup8"; - }; - }; - - qup_i2c9_default: qup-i2c9-default { - pinmux { - pins = "gpio6", "gpio7"; - function = "qup9"; - }; - }; - - qup_i2c10_default: qup-i2c10-default { - pinmux { - pins = "gpio55", "gpio56"; - function = "qup10"; - }; - }; - - qup_i2c11_default: qup-i2c11-default { - pinmux { - pins = "gpio31", "gpio32"; - function = "qup11"; - }; - }; - - qup_i2c12_default: qup-i2c12-default { - pinmux { - pins = "gpio49", "gpio50"; - function = "qup12"; - }; - }; - - qup_i2c13_default: qup-i2c13-default { - pinmux { - pins = "gpio105", "gpio106"; - function = "qup13"; - }; - }; - - qup_i2c14_default: qup-i2c14-default { - pinmux { - pins = "gpio33", "gpio34"; - function = "qup14"; - }; - }; - - qup_i2c15_default: qup-i2c15-default { - pinmux { - pins = "gpio81", "gpio82"; - function = "qup15"; - }; - }; - - qup_spi0_default: qup-spi0-default { - pinmux { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - function = "qup0"; - }; - }; - - qup_spi1_default: qup-spi1-default { - pinmux { - pins = "gpio17", "gpio18", - "gpio19", "gpio20"; - function = "qup1"; - }; - }; - - qup_spi2_default: qup-spi2-default { - pinmux { - pins = "gpio27", "gpio28", - "gpio29", "gpio30"; - function = "qup2"; - }; - }; - - qup_spi3_default: qup-spi3-default { - pinmux { - pins = "gpio41", "gpio42", - "gpio43", "gpio44"; - function = "qup3"; - }; - }; - - qup_spi4_default: qup-spi4-default { - pinmux { - pins = "gpio89", "gpio90", - "gpio91", "gpio92"; - function = "qup4"; - }; - }; - - qup_spi5_default: qup-spi5-default { - pinmux { - pins = "gpio85", "gpio86", - "gpio87", "gpio88"; - function = "qup5"; - }; - }; - - qup_spi6_default: qup-spi6-default { - pinmux { - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; - function = "qup6"; - }; - }; - - qup_spi7_default: qup-spi7-default { - pinmux { - pins = "gpio93", "gpio94", - "gpio95", "gpio96"; - function = "qup7"; - }; - }; - - qup_spi8_default: qup-spi8-default { - pinmux { - pins = "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "qup8"; - }; - }; - - qup_spi9_default: qup-spi9-default { - pinmux { - pins = "gpio6", "gpio7", - "gpio4", "gpio5"; - function = "qup9"; - }; - }; - - qup_spi10_default: qup-spi10-default { - pinmux { - pins = "gpio55", "gpio56", - "gpio53", "gpio54"; - function = "qup10"; - }; - }; - - qup_spi11_default: qup-spi11-default { - pinmux { - pins = "gpio31", "gpio32", - "gpio33", "gpio34"; - function = "qup11"; - }; - }; - - qup_spi12_default: qup-spi12-default { - pinmux { - pins = "gpio49", "gpio50", - "gpio51", "gpio52"; - function = "qup12"; - }; - }; - - qup_spi13_default: qup-spi13-default { - pinmux { - pins = "gpio105", "gpio106", - "gpio107", "gpio108"; - function = "qup13"; - }; - }; - - qup_spi14_default: qup-spi14-default { - pinmux { - pins = "gpio33", "gpio34", - "gpio31", "gpio32"; - function = "qup14"; - }; - }; - - qup_spi15_default: qup-spi15-default { - pinmux { - pins = "gpio81", "gpio82", - "gpio83", "gpio84"; - function = "qup15"; - }; - }; - - qup_uart0_default: qup-uart0-default { - pinmux { - pins = "gpio2", "gpio3"; - function = "qup0"; - }; - }; - - qup_uart1_default: qup-uart1-default { - pinmux { - pins = "gpio19", "gpio20"; - function = "qup1"; - }; - }; - - qup_uart2_default: qup-uart2-default { - pinmux { - pins = "gpio29", "gpio30"; - function = "qup2"; - }; - }; - - qup_uart3_default: qup-uart3-default { - pinmux { - pins = "gpio43", "gpio44"; - function = "qup3"; - }; - }; - - qup_uart4_default: qup-uart4-default { - pinmux { - pins = "gpio91", "gpio92"; - function = "qup4"; - }; - }; - - qup_uart5_default: qup-uart5-default { - pinmux { - pins = "gpio87", "gpio88"; - function = "qup5"; - }; - }; - - qup_uart6_default: qup-uart6-default { - pinmux { - pins = "gpio47", "gpio48"; - function = "qup6"; - }; - }; - - qup_uart7_default: qup-uart7-default { - pinmux { - pins = "gpio95", "gpio96"; - function = "qup7"; - }; - }; - - qup_uart8_default: qup-uart8-default { - pinmux { - pins = "gpio67", "gpio68"; - function = "qup8"; - }; - }; - - qup_uart9_default: qup-uart9-default { - pinmux { - pins = "gpio4", "gpio5"; - function = "qup9"; - }; - }; - - qup_uart10_default: qup-uart10-default { - pinmux { - pins = "gpio53", "gpio54"; - function = "qup10"; - }; - }; - - qup_uart11_default: qup-uart11-default { - pinmux { - pins = "gpio33", "gpio34"; - function = "qup11"; - }; - }; - - qup_uart12_default: qup-uart12-default { - pinmux { - pins = "gpio51", "gpio52"; - function = "qup12"; - }; - }; - - qup_uart13_default: qup-uart13-default { - pinmux { - pins = "gpio107", "gpio108"; - function = "qup13"; - }; - }; - - qup_uart14_default: qup-uart14-default { - pinmux { - pins = "gpio31", "gpio32"; - function = "qup14"; - }; - }; - - qup_uart15_default: qup-uart15-default { - pinmux { - pins = "gpio83", "gpio84"; - function = "qup15"; - }; - }; - - quat_mi2s_sleep: quat_mi2s_sleep { - mux { - pins = "gpio58", "gpio59"; - function = "gpio"; - }; - - config { - pins = "gpio58", "gpio59"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; - }; - - quat_mi2s_active: quat_mi2s_active { - mux { - pins = "gpio58", "gpio59"; - function = "qua_mi2s"; - }; - - config { - pins = "gpio58", "gpio59"; - drive-strength = <8>; - bias-disable; - output-high; - }; - }; - - quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep { - mux { - pins = "gpio60"; - function = "gpio"; - }; - - config { - pins = "gpio60"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; - }; - - quat_mi2s_sd0_active: quat_mi2s_sd0_active { - mux { - pins = "gpio60"; - function = "qua_mi2s"; - }; - - config { - pins = "gpio60"; - drive-strength = <8>; - bias-disable; - }; - }; - - quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep { - mux { - pins = "gpio61"; - function = "gpio"; - }; - - config { - pins = "gpio61"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; - }; - - quat_mi2s_sd1_active: quat_mi2s_sd1_active { - mux { - pins = "gpio61"; - function = "qua_mi2s"; - }; - - config { - pins = "gpio61"; - drive-strength = <8>; - bias-disable; - }; - }; - - quat_mi2s_sd2_sleep: quat_mi2s_sd2_sleep { - mux { - pins = "gpio62"; - function = "gpio"; - }; - - config { - pins = "gpio62"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; - }; - - quat_mi2s_sd2_active: quat_mi2s_sd2_active { - mux { - pins = "gpio62"; - function = "qua_mi2s"; - }; - - config { - pins = "gpio62"; - drive-strength = <8>; - bias-disable; - }; - }; - - quat_mi2s_sd3_sleep: quat_mi2s_sd3_sleep { - mux { - pins = "gpio63"; - function = "gpio"; - }; - - config { - pins = "gpio63"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; - }; - - quat_mi2s_sd3_active: quat_mi2s_sd3_active { - mux { - pins = "gpio63"; - function = "qua_mi2s"; - }; - - config { - pins = "gpio63"; - drive-strength = <8>; - bias-disable; - }; - }; - }; - - mss_pil: remoteproc@4080000 { - compatible = "qcom,sdm845-mss-pil"; - reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = - <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack", - "shutdown-ack"; - - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, - <&gcc GCC_MSS_SNOC_AXI_CLK>, - <&gcc GCC_MSS_MFAB_AXIS_CLK>, - <&gcc GCC_PRNG_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "bus", "mem", "gpll0_mss", - "snoc_axi", "mnoc_axi", "prng", "xo"; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - resets = <&aoss_reset AOSS_CC_MSS_RESTART>, - <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "mss_restart", "pdc_reset"; - - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; - - power-domains = <&aoss_qmp 2>, - <&rpmhpd SDM845_CX>, - <&rpmhpd SDM845_MX>, - <&rpmhpd SDM845_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; - - mba { - memory-region = <&mba_region>; - }; - - mpss { - memory-region = <&mpss_region>; - }; - - glink-edge { - interrupts = ; - label = "modem"; - qcom,remote-pid = <1>; - mboxes = <&apss_shared 12>; - }; - }; - - gpucc: clock-controller@5090000 { - compatible = "qcom,sdm845-gpucc"; - reg = <0 0x05090000 0 0x9000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_GPU_GPLL0_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; - clock-names = "bi_tcxo", - "gcc_gpu_gpll0_clk_src", - "gcc_gpu_gpll0_div_clk_src"; - }; - - stm@6002000 { - compatible = "arm,coresight-stm", "arm,primecell"; - reg = <0 0x06002000 0 0x1000>, - <0 0x16280000 0 0x180000>; - reg-names = "stm-base", "stm-stimulus-base"; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - stm_out: endpoint { - remote-endpoint = - <&funnel0_in7>; - }; - }; - }; - }; - - funnel@6041000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06041000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - funnel0_out: endpoint { - remote-endpoint = - <&merge_funnel_in0>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@7 { - reg = <7>; - funnel0_in7: endpoint { - remote-endpoint = <&stm_out>; - }; - }; - }; - }; - - funnel@6043000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06043000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - funnel2_out: endpoint { - remote-endpoint = - <&merge_funnel_in2>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@5 { - reg = <5>; - funnel2_in5: endpoint { - remote-endpoint = - <&apss_merge_funnel_out>; - }; - }; - }; - }; - - funnel@6045000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06045000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - merge_funnel_out: endpoint { - remote-endpoint = <&etf_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - merge_funnel_in0: endpoint { - remote-endpoint = - <&funnel0_out>; - }; - }; - - port@2 { - reg = <2>; - merge_funnel_in2: endpoint { - remote-endpoint = - <&funnel2_out>; - }; - }; - }; - }; - - replicator@6046000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0 0x06046000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - replicator_out: endpoint { - remote-endpoint = <&etr_in>; - }; - }; - }; - - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&etf_out>; - }; - }; - }; - }; - - etf@6047000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0 0x06047000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - etf_out: endpoint { - remote-endpoint = - <&replicator_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - etf_in: endpoint { - remote-endpoint = - <&merge_funnel_out>; - }; - }; - }; - }; - - etr@6048000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0 0x06048000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,scatter-gather; - - in-ports { - port { - etr_in: endpoint { - remote-endpoint = - <&replicator_out>; - }; - }; - }; - }; - - etm@7040000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07040000 0 0x1000>; - - cpu = <&CPU0>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm0_out: endpoint { - remote-endpoint = - <&apss_funnel_in0>; - }; - }; - }; - }; - - etm@7140000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07140000 0 0x1000>; - - cpu = <&CPU1>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm1_out: endpoint { - remote-endpoint = - <&apss_funnel_in1>; - }; - }; - }; - }; - - etm@7240000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07240000 0 0x1000>; - - cpu = <&CPU2>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm2_out: endpoint { - remote-endpoint = - <&apss_funnel_in2>; - }; - }; - }; - }; - - etm@7340000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07340000 0 0x1000>; - - cpu = <&CPU3>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm3_out: endpoint { - remote-endpoint = - <&apss_funnel_in3>; - }; - }; - }; - }; - - etm@7440000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07440000 0 0x1000>; - - cpu = <&CPU4>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm4_out: endpoint { - remote-endpoint = - <&apss_funnel_in4>; - }; - }; - }; - }; - - etm@7540000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07540000 0 0x1000>; - - cpu = <&CPU5>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm5_out: endpoint { - remote-endpoint = - <&apss_funnel_in5>; - }; - }; - }; - }; - - etm@7640000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07640000 0 0x1000>; - - cpu = <&CPU6>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm6_out: endpoint { - remote-endpoint = - <&apss_funnel_in6>; - }; - }; - }; - }; - - etm@7740000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07740000 0 0x1000>; - - cpu = <&CPU7>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm7_out: endpoint { - remote-endpoint = - <&apss_funnel_in7>; - }; - }; - }; - }; - - funnel@7800000 { /* APSS Funnel */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x07800000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - apss_funnel_out: endpoint { - remote-endpoint = - <&apss_merge_funnel_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - apss_funnel_in0: endpoint { - remote-endpoint = - <&etm0_out>; - }; - }; - - port@1 { - reg = <1>; - apss_funnel_in1: endpoint { - remote-endpoint = - <&etm1_out>; - }; - }; - - port@2 { - reg = <2>; - apss_funnel_in2: endpoint { - remote-endpoint = - <&etm2_out>; - }; - }; - - port@3 { - reg = <3>; - apss_funnel_in3: endpoint { - remote-endpoint = - <&etm3_out>; - }; - }; - - port@4 { - reg = <4>; - apss_funnel_in4: endpoint { - remote-endpoint = - <&etm4_out>; - }; - }; - - port@5 { - reg = <5>; - apss_funnel_in5: endpoint { - remote-endpoint = - <&etm5_out>; - }; - }; - - port@6 { - reg = <6>; - apss_funnel_in6: endpoint { - remote-endpoint = - <&etm6_out>; - }; - }; - - port@7 { - reg = <7>; - apss_funnel_in7: endpoint { - remote-endpoint = - <&etm7_out>; - }; - }; - }; - }; - - funnel@7810000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x07810000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - apss_merge_funnel_out: endpoint { - remote-endpoint = - <&funnel2_in5>; - }; - }; - }; - - in-ports { - port { - apss_merge_funnel_in: endpoint { - remote-endpoint = - <&apss_funnel_out>; - }; - }; - }; - }; - - sdhc_2: sdhci@8804000 { - compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; - reg = <0 0x08804000 0 0x1000>; - - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>; - clock-names = "iface", "core"; - iommus = <&apps_smmu 0xa0 0xf>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&sdhc2_opp_table>; - - status = "disabled"; - - sdhc2_opp_table: sdhc2-opp-table { - compatible = "operating-points-v2"; - - opp-9600000 { - opp-hz = /bits/ 64 <9600000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-201500000 { - opp-hz = /bits/ 64 <201500000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - }; - }; - - qspi_opp_table: qspi-opp-table { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - qspi: spi@88df000 { - compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; - reg = <0 0x088df000 0 0x600>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, - <&gcc GCC_QSPI_CORE_CLK>; - clock-names = "iface", "core"; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qspi_opp_table>; - status = "disabled"; - }; - - slim: slim@171c0000 { - compatible = "qcom,slim-ngd-v2.1.0"; - reg = <0 0x171c0000 0 0x2c000>; - interrupts = ; - - qcom,apps-ch-pipes = <0x780000>; - qcom,ea-pc = <0x270>; - status = "okay"; - dmas = <&slimbam 3>, <&slimbam 4>, - <&slimbam 5>, <&slimbam 6>; - dma-names = "rx", "tx", "tx2", "rx2"; - - iommus = <&apps_smmu 0x1806 0x0>; - #address-cells = <1>; - #size-cells = <0>; - - ngd@1 { - reg = <1>; - #address-cells = <2>; - #size-cells = <0>; - - wcd9340_ifd: ifd@0{ - compatible = "slim217,250"; - reg = <0 0>; - }; - - wcd9340: codec@1{ - compatible = "slim217,250"; - reg = <1 0>; - slim-ifc-dev = <&wcd9340_ifd>; - - #sound-dai-cells = <1>; - - interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - #clock-cells = <0>; - clock-frequency = <9600000>; - clock-output-names = "mclk"; - qcom,micbias1-millivolt = <1800>; - qcom,micbias2-millivolt = <1800>; - qcom,micbias3-millivolt = <1800>; - qcom,micbias4-millivolt = <1800>; - - #address-cells = <1>; - #size-cells = <1>; - - wcdgpio: gpio-controller@42 { - compatible = "qcom,wcd9340-gpio"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x42 0x2>; - }; - - swm: swm@c85 { - compatible = "qcom,soundwire-v1.3.0"; - reg = <0xc85 0x40>; - interrupts-extended = <&wcd9340 20>; - - qcom,dout-ports = <6>; - qcom,din-ports = <2>; - qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>; - qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>; - - #sound-dai-cells = <1>; - clocks = <&wcd9340>; - clock-names = "iface"; - #address-cells = <2>; - #size-cells = <0>; - - - }; - }; - }; - }; - - sound: sound { - }; - - usb_1_hsphy: phy@88e2000 { - compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; - reg = <0 0x088e2000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "cfg_ahb", "ref"; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - - nvmem-cells = <&qusb2p_hstx_trim>; - }; - - usb_2_hsphy: phy@88e3000 { - compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; - reg = <0 0x088e3000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "cfg_ahb", "ref"; - - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; - - nvmem-cells = <&qusb2s_hstx_trim>; - }; - - usb_1_qmpphy: phy@88e9000 { - compatible = "qcom,sdm845-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x10>; - reg-names = "reg-base", "dp_com"; - status = "disabled"; - #clock-cells = <1>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; - reset-names = "phy", "common"; - - usb_1_ssphy: lanes@88e9200 { - reg = <0 0x088e9200 0 0x128>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x128>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - }; - - usb_2_qmpphy: phy@88eb000 { - compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x18c>; - status = "disabled"; - #clock-cells = <1>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; - - usb_2_ssphy: lane@88eb200 { - reg = <0 0x088eb200 0 0x128>, - <0 0x088eb400 0 0x1fc>, - <0 0x088eb800 0 0x218>, - <0 0x088eb600 0 0x70>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; - }; - - usb_1: usb@a6f8800 { - compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; - reg = <0 0x0a6f8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - dma-ranges; - - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <150000000>; - - interrupts = , - , - , - ; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; - - power-domains = <&gcc USB30_PRIM_GDSC>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - - interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; - interconnect-names = "usb-ddr", "apps-usb"; - - usb_1_dwc3: dwc3@a600000 { - compatible = "snps,dwc3"; - reg = <0 0x0a600000 0 0xcd00>; - interrupts = ; - iommus = <&apps_smmu 0x740 0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; - - usb_2: usb@a8f8800 { - compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; - reg = <0 0x0a8f8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - dma-ranges; - - clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; - - assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>; - assigned-clock-rates = <19200000>, <150000000>; - - interrupts = , - , - , - ; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; - - power-domains = <&gcc USB30_SEC_GDSC>; - - resets = <&gcc GCC_USB30_SEC_BCR>; - - interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; - interconnect-names = "usb-ddr", "apps-usb"; - - usb_2_dwc3: dwc3@a800000 { - compatible = "snps,dwc3"; - reg = <0 0x0a800000 0 0xcd00>; - interrupts = ; - iommus = <&apps_smmu 0x760 0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; - - venus: video-codec@aa00000 { - compatible = "qcom,sdm845-venus-v2"; - reg = <0 0x0aa00000 0 0xff000>; - interrupts = ; - power-domains = <&videocc VENUS_GDSC>, - <&videocc VCODEC0_GDSC>, - <&videocc VCODEC1_GDSC>, - <&rpmhpd SDM845_CX>; - power-domain-names = "venus", "vcodec0", "vcodec1", "cx"; - operating-points-v2 = <&venus_opp_table>; - clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; - clock-names = "core", "iface", "bus", - "vcodec0_core", "vcodec0_bus", - "vcodec1_core", "vcodec1_bus"; - iommus = <&apps_smmu 0x10a0 0x8>, - <&apps_smmu 0x10b0 0x0>; - memory-region = <&venus_mem>; - interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; - interconnect-names = "video-mem", "cpu-cfg"; - - video-core0 { - compatible = "venus-decoder"; - }; - - video-core1 { - compatible = "venus-encoder"; - }; - - venus_opp_table: venus-opp-table { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-320000000 { - opp-hz = /bits/ 64 <320000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-380000000 { - opp-hz = /bits/ 64 <380000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-444000000 { - opp-hz = /bits/ 64 <444000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - - opp-533000097 { - opp-hz = /bits/ 64 <533000097>; - required-opps = <&rpmhpd_opp_turbo>; - }; - }; - }; - - videocc: clock-controller@ab00000 { - compatible = "qcom,sdm845-videocc"; - reg = <0 0x0ab00000 0 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "bi_tcxo"; - #clock-cells = <1>; - #power-domain-cells = <1>; - #reset-cells = <1>; - }; - - cci: cci@ac4a000 { - compatible = "qcom,sdm845-cci"; - #address-cells = <1>; - #size-cells = <0>; - - reg = <0 0x0ac4a000 0 0x4000>; - interrupts = ; - power-domains = <&clock_camcc TITAN_TOP_GDSC>; - - clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, - <&clock_camcc CAM_CC_SOC_AHB_CLK>, - <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, - <&clock_camcc CAM_CC_CPAS_AHB_CLK>, - <&clock_camcc CAM_CC_CCI_CLK>, - <&clock_camcc CAM_CC_CCI_CLK_SRC>; - clock-names = "camnoc_axi", - "soc_ahb", - "slow_ahb_src", - "cpas_ahb", - "cci", - "cci_src"; - - assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, - <&clock_camcc CAM_CC_CCI_CLK>; - assigned-clock-rates = <80000000>, <37500000>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cci0_default &cci1_default>; - pinctrl-1 = <&cci0_sleep &cci1_sleep>; - - status = "disabled"; - - cci_i2c0: i2c-bus@0 { - reg = <0>; - clock-frequency = <1000000>; - #address-cells = <1>; - #size-cells = <0>; - }; - - cci_i2c1: i2c-bus@1 { - reg = <1>; - clock-frequency = <1000000>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - clock_camcc: clock-controller@ad00000 { - compatible = "qcom,sdm845-camcc"; - reg = <0 0x0ad00000 0 0x10000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - dsi_opp_table: dsi-opp-table { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-180000000 { - opp-hz = /bits/ 64 <180000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-275000000 { - opp-hz = /bits/ 64 <275000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-328580000 { - opp-hz = /bits/ 64 <328580000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-358000000 { - opp-hz = /bits/ 64 <358000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - mdss: mdss@ae00000 { - compatible = "qcom,sdm845-mdss"; - reg = <0 0x0ae00000 0 0x1000>; - reg-names = "mdss"; - - power-domains = <&dispcc MDSS_GDSC>; - - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&gcc GCC_DISP_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - - interrupts = ; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>, - <&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "mdp0-mem", "mdp1-mem"; - - iommus = <&apps_smmu 0x880 0x8>, - <&apps_smmu 0xc80 0x8>; - - status = "disabled"; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - - mdss_mdp: mdp@ae01000 { - compatible = "qcom,sdm845-dpu"; - reg = <0 0x0ae01000 0 0x8f000>, - <0 0x0aeb0000 0 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "core", "vsync"; - - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <300000000>, - <19200000>; - operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SDM845_CX>; - - interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - - mdp_opp_table: mdp-opp-table { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-171428571 { - opp-hz = /bits/ 64 <171428571>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-344000000 { - opp-hz = /bits/ 64 <344000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-430000000 { - opp-hz = /bits/ 64 <430000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - }; - - dsi0: dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; - reg = <0 0x0ae94000 0 0x400>; - reg-names = "dsi_ctrl"; - - interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, - <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, - <&dispcc DISP_CC_MDSS_PCLK0_CLK>, - <&dispcc DISP_CC_MDSS_ESC0_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AXI_CLK>; - clock-names = "byte", - "byte_intf", - "pixel", - "core", - "iface", - "bus"; - operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SDM845_CX>; - - phys = <&dsi0_phy>; - phy-names = "dsi"; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&dpu_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - }; - }; - }; - }; - - dsi0_phy: dsi-phy@ae94400 { - compatible = "qcom,dsi-phy-10nm"; - reg = <0 0x0ae94400 0 0x200>, - <0 0x0ae94600 0 0x280>, - <0 0x0ae94a00 0 0x1e0>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; - - #clock-cells = <1>; - #phy-cells = <0>; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "ref"; - - status = "disabled"; - }; - - dsi1: dsi@ae96000 { - compatible = "qcom,mdss-dsi-ctrl"; - reg = <0 0x0ae96000 0 0x400>; - reg-names = "dsi_ctrl"; - - interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, - <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, - <&dispcc DISP_CC_MDSS_PCLK1_CLK>, - <&dispcc DISP_CC_MDSS_ESC1_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AXI_CLK>; - clock-names = "byte", - "byte_intf", - "pixel", - "core", - "iface", - "bus"; - operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SDM845_CX>; - - phys = <&dsi1_phy>; - phy-names = "dsi"; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi1_in: endpoint { - remote-endpoint = <&dpu_intf2_out>; - }; - }; - - port@1 { - reg = <1>; - dsi1_out: endpoint { - }; - }; - }; - }; - - dsi1_phy: dsi-phy@ae96400 { - compatible = "qcom,dsi-phy-10nm"; - reg = <0 0x0ae96400 0 0x200>, - <0 0x0ae96600 0 0x280>, - <0 0x0ae96a00 0 0x10e>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; - - #clock-cells = <1>; - #phy-cells = <0>; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "ref"; - - status = "disabled"; - }; - }; - - gpu: gpu@5000000 { - compatible = "qcom,adreno-630.2", "qcom,adreno"; - #stream-id-cells = <16>; - - reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>; - reg-names = "kgsl_3d0_reg_memory", "cx_mem"; - - /* - * Look ma, no clocks! The GPU clocks and power are - * controlled entirely by the GMU - */ - - interrupts = ; - - iommus = <&adreno_smmu 0>; - - operating-points-v2 = <&gpu_opp_table>; - - qcom,gmu = <&gmu>; - - interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "gfx-mem"; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-710000000 { - opp-hz = /bits/ 64 <710000000>; - opp-level = ; - opp-peak-kBps = <7216000>; - }; - - opp-675000000 { - opp-hz = /bits/ 64 <675000000>; - opp-level = ; - opp-peak-kBps = <7216000>; - }; - - opp-596000000 { - opp-hz = /bits/ 64 <596000000>; - opp-level = ; - opp-peak-kBps = <6220000>; - }; - - opp-520000000 { - opp-hz = /bits/ 64 <520000000>; - opp-level = ; - opp-peak-kBps = <6220000>; - }; - - opp-414000000 { - opp-hz = /bits/ 64 <414000000>; - opp-level = ; - opp-peak-kBps = <4068000>; - }; - - opp-342000000 { - opp-hz = /bits/ 64 <342000000>; - opp-level = ; - opp-peak-kBps = <2724000>; - }; - - opp-257000000 { - opp-hz = /bits/ 64 <257000000>; - opp-level = ; - opp-peak-kBps = <1648000>; - }; - }; - }; - - adreno_smmu: iommu@5040000 { - compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; - reg = <0 0x5040000 0 0x10000>; - #iommu-cells = <1>; - #global-interrupts = <2>; - interrupts = , - , - , - , - , - , - , - , - , - ; - clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gcc GCC_GPU_CFG_AHB_CLK>; - clock-names = "bus", "iface"; - - power-domains = <&gpucc GPU_CX_GDSC>; - }; - - gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; - - reg = <0 0x506a000 0 0x30000>, - <0 0xb280000 0 0x10000>, - <0 0xb480000 0 0x10000>; - reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; - - interrupts = , - ; - interrupt-names = "hfi", "gmu"; - - clocks = <&gpucc GPU_CC_CX_GMU_CLK>, - <&gpucc GPU_CC_CXO_CLK>, - <&gcc GCC_DDRSS_GPU_AXI_CLK>, - <&gcc GCC_GPU_MEMNOC_GFX_CLK>; - clock-names = "gmu", "cxo", "axi", "memnoc"; - - power-domains = <&gpucc GPU_CX_GDSC>, - <&gpucc GPU_GX_GDSC>; - power-domain-names = "cx", "gx"; - - iommus = <&adreno_smmu 5>; - - operating-points-v2 = <&gmu_opp_table>; - - gmu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-level = ; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-level = ; - }; - }; - }; - - dispcc: clock-controller@af00000 { - compatible = "qcom,sdm845-dispcc"; - reg = <0 0x0af00000 0 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_DISP_GPLL0_CLK_SRC>, - <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, - <&dsi1_phy 0>, - <&dsi1_phy 1>, - <0>, - <0>; - clock-names = "bi_tcxo", - "gcc_disp_gpll0_clk_src", - "gcc_disp_gpll0_div_clk_src", - "dsi0_phy_pll_out_byteclk", - "dsi0_phy_pll_out_dsiclk", - "dsi1_phy_pll_out_byteclk", - "dsi1_phy_pll_out_dsiclk", - "dp_link_clk_divsel_ten", - "dp_vco_divided_clk_src_mux"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - pdc_intc: interrupt-controller@b220000 { - compatible = "qcom,sdm845-pdc", "qcom,pdc"; - reg = <0 0x0b220000 0 0x30000>; - qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupt-controller; - }; - - pdc_reset: reset-controller@b2e0000 { - compatible = "qcom,sdm845-pdc-global"; - reg = <0 0x0b2e0000 0 0x20000>; - #reset-cells = <1>; - }; - - tsens0: thermal-sensor@c263000 { - compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0 0x0c263000 0 0x1ff>, /* TM */ - <0 0x0c222000 0 0x1ff>; /* SROT */ - #qcom,sensors = <13>; - interrupts = , - ; - interrupt-names = "uplow", "critical"; - #thermal-sensor-cells = <1>; - }; - - tsens1: thermal-sensor@c265000 { - compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0 0x0c265000 0 0x1ff>, /* TM */ - <0 0x0c223000 0 0x1ff>; /* SROT */ - #qcom,sensors = <8>; - interrupts = , - ; - interrupt-names = "uplow", "critical"; - #thermal-sensor-cells = <1>; - }; - - aoss_reset: reset-controller@c2a0000 { - compatible = "qcom,sdm845-aoss-cc"; - reg = <0 0x0c2a0000 0 0x31000>; - #reset-cells = <1>; - }; - - aoss_qmp: qmp@c300000 { - compatible = "qcom,sdm845-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; - interrupts = ; - mboxes = <&apss_shared 0>; - - #clock-cells = <0>; - #power-domain-cells = <1>; - - cx_cdev: cx { - #cooling-cells = <2>; - }; - - ebi_cdev: ebi { - #cooling-cells = <2>; - }; - }; - - spmi_bus: spmi@c440000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0 0x0c440000 0 0x1100>, - <0 0x0c600000 0 0x2000000>, - <0 0x0e600000 0 0x100000>, - <0 0x0e700000 0 0xa0000>, - <0 0x0c40a000 0 0x26000>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = ; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - cell-index = <0>; - }; - - imem@146bf000 { - compatible = "simple-mfd"; - reg = <0 0x146bf000 0 0x1000>; - - #address-cells = <1>; - #size-cells = <1>; - - ranges = <0 0 0x146bf000 0x1000>; - - pil-reloc@94c { - compatible = "qcom,pil-reloc-info"; - reg = <0x94c 0xc8>; - }; - }; - - apps_smmu: iommu@15000000 { - compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; - reg = <0 0x15000000 0 0x80000>; - #iommu-cells = <2>; - #global-interrupts = <1>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - }; - - lpasscc: clock-controller@17014000 { - compatible = "qcom,sdm845-lpasscc"; - reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>; - reg-names = "cc", "qdsp6ss"; - #clock-cells = <1>; - status = "disabled"; - }; - - gladiator_noc: interconnect@17900000 { - compatible = "qcom,sdm845-gladiator-noc"; - reg = <0 0x17900000 0 0xd080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - watchdog@17980000 { - compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; - reg = <0 0x17980000 0 0x1000>; - clocks = <&sleep_clk>; - interrupts = ; - }; - - apss_shared: mailbox@17990000 { - compatible = "qcom,sdm845-apss-shared"; - reg = <0 0x17990000 0 0x1000>; - #mbox-cells = <1>; - }; - - apps_rsc: rsc@179c0000 { - label = "apps_rsc"; - compatible = "qcom,rpmh-rsc"; - reg = <0 0x179c0000 0 0x10000>, - <0 0x179d0000 0 0x10000>, - <0 0x179e0000 0 0x10000>; - reg-names = "drv-0", "drv-1", "drv-2"; - interrupts = , - , - ; - qcom,tcs-offset = <0xd00>; - qcom,drv-id = <2>; - qcom,tcs-config = , - , - , - ; - - apps_bcm_voter: bcm-voter { - compatible = "qcom,bcm-voter"; - }; - - rpmhcc: clock-controller { - compatible = "qcom,sdm845-rpmh-clk"; - #clock-cells = <1>; - clock-names = "xo"; - clocks = <&xo_board>; - }; - - rpmhpd: power-controller { - compatible = "qcom,sdm845-rpmhpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmhpd_opp_table>; - - rpmhpd_opp_table: opp-table { - compatible = "operating-points-v2"; - - rpmhpd_opp_ret: opp1 { - opp-level = ; - }; - - rpmhpd_opp_min_svs: opp2 { - opp-level = ; - }; - - rpmhpd_opp_low_svs: opp3 { - opp-level = ; - }; - - rpmhpd_opp_svs: opp4 { - opp-level = ; - }; - - rpmhpd_opp_svs_l1: opp5 { - opp-level = ; - }; - - rpmhpd_opp_nom: opp6 { - opp-level = ; - }; - - rpmhpd_opp_nom_l1: opp7 { - opp-level = ; - }; - - rpmhpd_opp_nom_l2: opp8 { - opp-level = ; - }; - - rpmhpd_opp_turbo: opp9 { - opp-level = ; - }; - - rpmhpd_opp_turbo_l1: opp10 { - opp-level = ; - }; - }; - }; - }; - - intc: interrupt-controller@17a00000 { - compatible = "arm,gic-v3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0 0x17a00000 0 0x10000>, /* GICD */ - <0 0x17a60000 0 0x100000>; /* GICR * 8 */ - interrupts = ; - - msi-controller@17a40000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0 0x17a40000 0 0x20000>; - status = "disabled"; - }; - }; - - slimbam: dma-controller@17184000 { - compatible = "qcom,bam-v1.7.0"; - qcom,controlled-remotely; - reg = <0 0x17184000 0 0x2a000>; - num-channels = <31>; - interrupts = ; - #dma-cells = <1>; - qcom,ee = <1>; - qcom,num-ees = <2>; - iommus = <&apps_smmu 0x1806 0x0>; - }; - - timer@17c90000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0 0x17c90000 0 0x1000>; - - frame@17ca0000 { - frame-number = <0>; - interrupts = , - ; - reg = <0 0x17ca0000 0 0x1000>, - <0 0x17cb0000 0 0x1000>; - }; - - frame@17cc0000 { - frame-number = <1>; - interrupts = ; - reg = <0 0x17cc0000 0 0x1000>; - status = "disabled"; - }; - - frame@17cd0000 { - frame-number = <2>; - interrupts = ; - reg = <0 0x17cd0000 0 0x1000>; - status = "disabled"; - }; - - frame@17ce0000 { - frame-number = <3>; - interrupts = ; - reg = <0 0x17ce0000 0 0x1000>; - status = "disabled"; - }; - - frame@17cf0000 { - frame-number = <4>; - interrupts = ; - reg = <0 0x17cf0000 0 0x1000>; - status = "disabled"; - }; - - frame@17d00000 { - frame-number = <5>; - interrupts = ; - reg = <0 0x17d00000 0 0x1000>; - status = "disabled"; - }; - - frame@17d10000 { - frame-number = <6>; - interrupts = ; - reg = <0 0x17d10000 0 0x1000>; - status = "disabled"; - }; - }; - - osm_l3: interconnect@17d41000 { - compatible = "qcom,sdm845-osm-l3"; - reg = <0 0x17d41000 0 0x1400>; - - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; - clock-names = "xo", "alternate"; - - #interconnect-cells = <1>; - }; - - cpufreq_hw: cpufreq@17d43000 { - compatible = "qcom,cpufreq-hw"; - reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; - reg-names = "freq-domain0", "freq-domain1"; - - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; - clock-names = "xo", "alternate"; - - #freq-domain-cells = <1>; - }; - - wifi: wifi@18800000 { - compatible = "qcom,wcn3990-wifi"; - status = "disabled"; - reg = <0 0x18800000 0 0x800000>; - reg-names = "membase"; - memory-region = <&wlan_msa_mem>; - clock-names = "cxo_ref_clk_pin"; - clocks = <&rpmhcc RPMH_RF_CLK2>; - interrupts = - , - , - , - , - , - , - , - , - , - , - , - ; - iommus = <&apps_smmu 0x0040 0x1>; - }; - }; - - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 1>; - - trips { - cpu0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu0_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu0_crit: cpu_crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu0_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu0_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 2>; - - trips { - cpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu1_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu1_crit: cpu_crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu1_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu1_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 3>; - - trips { - cpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu2_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu2_crit: cpu_crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu2_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu2_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 4>; - - trips { - cpu3_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu3_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu3_crit: cpu_crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu3_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu3_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu4-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 7>; - - trips { - cpu4_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu4_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu4_crit: cpu_crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu4_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu4_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu5-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 8>; - - trips { - cpu5_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu5_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu5_crit: cpu_crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu5_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu5_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu6-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 9>; - - trips { - cpu6_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu6_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu6_crit: cpu_crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu6_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu6_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu7-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 10>; - - trips { - cpu7_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu7_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu7_crit: cpu_crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu7_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu7_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - aoss0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 0>; - - trips { - aoss0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - cluster0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 5>; - - trips { - cluster0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cluster0_crit: cluster0_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cluster1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 6>; - - trips { - cluster1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cluster1_crit: cluster1_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - gpu-thermal-top { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 11>; - - trips { - gpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - gpu-thermal-bottom { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 12>; - - trips { - gpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - aoss1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 0>; - - trips { - aoss1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - q6-modem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 1>; - - trips { - q6_modem_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - mem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 2>; - - trips { - mem_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - wlan-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 3>; - - trips { - wlan_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - q6-hvx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 4>; - - trips { - q6_hvx_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - camera-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 5>; - - trips { - camera_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - video-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 6>; - - trips { - video_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - modem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 7>; - - trips { - modem_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts deleted file mode 100644 index 140db2d5b..000000000 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ /dev/null @@ -1,727 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Lenovo Yoga C630 - * - * Copyright (c) 2019, Linaro Ltd. - */ - -/dts-v1/; - -#include -#include -#include -#include -#include -#include -#include "sdm850.dtsi" -#include "pm8998.dtsi" - -/ { - model = "Lenovo Yoga C630"; - compatible = "lenovo,yoga-c630", "qcom,sdm845"; - - aliases { - hsuart0 = &uart6; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>; - - lid { - gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; - linux,input-type = ; - linux,code = ; - wakeup-source; - wakeup-event-action = ; - }; - - mode { - gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; - linux,input-type = ; - linux,code = ; - }; - }; - - panel { - compatible = "boe,nv133fhm-n61"; - no-hpd; - - ports { - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; - - sn65dsi86_refclk: sn65dsi86-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - - clock-frequency = <19200000>; - }; -}; - -&adsp_pas { - firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn"; - status = "okay"; -}; - -&apps_rsc { - pm8998-rpmh-regulators { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - - vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; - vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; - - vreg_s2a_1p125: smps2 { - }; - - vreg_s3a_1p35: smps3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - regulator-initial-mode = ; - }; - - vreg_s4a_1p8: smps4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_s5a_2p04: smps5 { - regulator-min-microvolt = <2040000>; - regulator-max-microvolt = <2040000>; - regulator-initial-mode = ; - }; - - vreg_s7a_1p025: smps7 { - }; - - vdd_qusb_hs0: - vdda_hp_pcie_core: - vdda_mipi_csi0_0p9: - vdda_mipi_csi1_0p9: - vdda_mipi_csi2_0p9: - vdda_mipi_dsi0_pll: - vdda_mipi_dsi1_pll: - vdda_qlink_lv: - vdda_qlink_lv_ck: - vdda_qrefs_0p875: - vdda_pcie_core: - vdda_pll_cc_ebi01: - vdda_pll_cc_ebi23: - vdda_sp_sensor: - vdda_ufs1_core: - vdda_ufs2_core: - vdda_usb1_ss_core: - vdda_usb2_ss_core: - vreg_l1a_0p875: ldo1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = ; - }; - - vddpx_10: - vreg_l2a_1p2: ldo2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - regulator-always-on; - }; - - vreg_l3a_1p0: ldo3 { - }; - - vdd_wcss_cx: - vdd_wcss_mx: - vdda_wcss_pll: - vreg_l5a_0p8: ldo5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = ; - }; - - vddpx_13: - vreg_l6a_1p8: ldo6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l7a_1p8: ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l8a_1p2: ldo8 { - }; - - vreg_l9a_1p8: ldo9 { - }; - - vreg_l10a_1p8: ldo10 { - }; - - vreg_l11a_1p0: ldo11 { - }; - - vdd_qfprom: - vdd_qfprom_sp: - vdda_apc1_cs_1p8: - vdda_gfx_cs_1p8: - vdda_qrefs_1p8: - vdda_qusb_hs0_1p8: - vddpx_11: - vreg_l12a_1p8: ldo12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vddpx_2: - vreg_l13a_2p95: ldo13 { - }; - - vreg_l14a_1p88: ldo14 { - regulator-min-microvolt = <1880000>; - regulator-max-microvolt = <1880000>; - regulator-initial-mode = ; - regulator-always-on; - }; - - vreg_l15a_1p8: ldo15 { - }; - - vreg_l16a_2p7: ldo16 { - }; - - vreg_l17a_1p3: ldo17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - }; - - vreg_l18a_2p7: ldo18 { - }; - - vreg_l19a_3p0: ldo19 { - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3108000>; - regulator-initial-mode = ; - }; - - vreg_l20a_2p95: ldo20 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l21a_2p95: ldo21 { - }; - - vreg_l22a_2p85: ldo22 { - }; - - vreg_l23a_3p3: ldo23 { - }; - - vdda_qusb_hs0_3p1: - vreg_l24a_3p075: ldo24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3083000>; - regulator-initial-mode = ; - }; - - vreg_l25a_3p3: ldo25 { - regulator-min-microvolt = <3104000>; - regulator-max-microvolt = <3112000>; - regulator-initial-mode = ; - }; - - vdda_hp_pcie_1p2: - vdda_hv_ebi0: - vdda_hv_ebi1: - vdda_hv_ebi2: - vdda_hv_ebi3: - vdda_mipi_csi_1p25: - vdda_mipi_dsi0_1p2: - vdda_mipi_dsi1_1p2: - vdda_pcie_1p2: - vdda_ufs1_1p2: - vdda_ufs2_1p2: - vdda_usb1_ss_1p2: - vdda_usb2_ss_1p2: - vreg_l26a_1p2: ldo26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1208000>; - regulator-initial-mode = ; - }; - - vreg_l28a_3p0: ldo28 { - }; - - vreg_lvs1a_1p8: lvs1 { - }; - - vreg_lvs2a_1p8: lvs2 { - }; - }; -}; - -&cdsp_pas { - firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn"; - status = "okay"; -}; - -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - -&gcc { - protected-clocks = , - , - , - , - ; -}; - -&gpu { - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; - }; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <400000>; -}; - -&i2c3 { - status = "okay"; - clock-frequency = <400000>; - /* Overwrite pinctrl-0 from sdm845.dtsi */ - pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>; - - tsel: hid@15 { - compatible = "hid-over-i2c"; - reg = <0x15>; - hid-descr-addr = <0x1>; - - interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; - }; - - tsc2: hid@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; - hid-descr-addr = <0x20>; - - interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; - }; -}; - -&i2c5 { - status = "okay"; - clock-frequency = <400000>; - - tsc1: hid@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - hid-descr-addr = <0x1>; - - interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_hid_active>; - }; -}; - -&i2c10 { - status = "okay"; - clock-frequency = <400000>; - - sn65dsi86: bridge@2c { - compatible = "ti,sn65dsi86"; - reg = <0x2c>; - pinctrl-names = "default"; - pinctrl-0 = <&sn65dsi86_pin_active>; - - enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; - - vpll-supply = <&vreg_l14a_1p88>; - vccio-supply = <&vreg_l14a_1p88>; - - clocks = <&sn65dsi86_refclk>; - clock-names = "refclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sn65dsi86_in_a: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - sn65dsi86_out: endpoint { - remote-endpoint = <&panel_in_edp>; - }; - }; - }; - }; -}; - -&i2c11 { - status = "okay"; - clock-frequency = <400000>; - - ecsh: hid@5c { - compatible = "hid-over-i2c"; - reg = <0x5c>; - hid-descr-addr = <0x1>; - - interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_hid_active>; - }; -}; - -&mdss { - status = "okay"; -}; - -&mdss_mdp { - status = "okay"; -}; - -&mss_pil { - firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; -}; - -&qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_i2c12_default { - drive-strength = <2>; - bias-disable; -}; - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-pull-down; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&q6asmdai { - dai@0 { - reg = <0>; - }; - - dai@1 { - reg = <1>; - }; -}; - -&sound { - compatible = "qcom,db845c-sndcard"; - model = "Lenovo-YOGA-C630-13Q50"; - - audio-routing = - "RX_BIAS", "MCLK", - "AMIC2", "MIC BIAS2", - "SpkrLeft IN", "SPK1 OUT", - "SpkrRight IN", "SPK2 OUT", - "MM_DL1", "MultiMedia1 Playback", - "MultiMedia2 Capture", "MM_UL2"; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - mm2-dai-link { - link-name = "MultiMedia2"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; - }; - }; - - slim-dai-link { - link-name = "SLIM Playback"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; - }; - }; - - slimcap-dai-link { - link-name = "SLIM Capture"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_TX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9340 1>; - }; - }; -}; - -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; - - sn65dsi86_pin_active: sn65dsi86-enable { - pins = "gpio96"; - drive-strength = <2>; - bias-disable; - }; - - i2c3_hid_active: i2c2-hid-active { - pins = "gpio37"; - function = "gpio"; - - input-enable; - bias-pull-up; - drive-strength = <2>; - }; - - i2c5_hid_active: i2c5-hid-active { - pins = "gpio125"; - function = "gpio"; - - input-enable; - bias-pull-up; - drive-strength = <2>; - }; - - i2c11_hid_active: i2c11-hid-active { - pins = "gpio92"; - function = "gpio"; - - input-enable; - bias-pull-up; - drive-strength = <2>; - }; - - wcd_intr_default: wcd_intr_default { - pins = "gpio54"; - function = "gpio"; - - input-enable; - bias-pull-down; - drive-strength = <2>; - }; - - lid_pin_active: lid-pin { - pins = "gpio124"; - function = "gpio"; - - input-enable; - bias-disable; - }; - - mode_pin_active: mode-pin { - pins = "gpio95"; - function = "gpio"; - - input-enable; - bias-disable; - }; -}; - -&uart6 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - }; -}; - -&ufs_mem_hc { - status = "okay"; - - reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l20a_2p95>; - vcc-max-microamp = <600000>; -}; - -&ufs_mem_phy { - status = "okay"; - - vdda-phy-supply = <&vdda_ufs1_core>; - vdda-pll-supply = <&vdda_ufs1_1p2>; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdd-supply = <&vdda_usb1_ss_core>; - vdda-pll-supply = <&vdda_qusb_hs0_1p8>; - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; - qcom,preemphasis-level = ; - qcom,preemphasis-width = ; -}; - -&usb_1_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vdda_usb1_ss_1p2>; - vdda-pll-supply = <&vdda_usb1_ss_core>; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdd-supply = <&vdda_usb2_ss_core>; - vdda-pll-supply = <&vdda_qusb_hs0_1p8>; - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; -}; - -&usb_2_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vdda_usb2_ss_1p2>; - vdda-pll-supply = <&vdda_usb2_ss_core>; -}; - -&wcd9340{ - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; - - swm: swm@c85 { - left_spkr: wsa8810-left{ - compatible = "sdw10217211000"; - reg = <0 3>; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; - #thermal-sensor-cells = <0>; - sound-name-prefix = "SpkrLeft"; - #sound-dai-cells = <0>; - }; - - right_spkr: wsa8810-right{ - compatible = "sdw10217211000"; - powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>; - reg = <0 4>; - #thermal-sensor-cells = <0>; - sound-name-prefix = "SpkrRight"; - #sound-dai-cells = <0>; - }; - }; -}; - -&wifi { - status = "okay"; - - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - - qcom,snoc-host-cap-8bit-quirk; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm850.dtsi b/arch/arm64/boot/dts/qcom/sdm850.dtsi deleted file mode 100644 index b1c2cf566..000000000 --- a/arch/arm64/boot/dts/qcom/sdm850.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SDM850 SoC device tree source - * - * Copyright (c) 2020, The Linux Foundation. All rights reserved. - */ - -#include "sdm845.dtsi" - -&cpu4_opp_table { - cpu4_opp33: opp-2841600000 { - opp-hz = /bits/ 64 <2841600000>; - opp-peak-kBps = <7216000 25497600>; - }; - - cpu4_opp34: opp-2956800000 { - opp-hz = /bits/ 64 <2956800000>; - opp-peak-kBps = <7216000 25497600>; - turbo-mode; - }; -}; diff --git a/drivers/input/input.c b/drivers/input/input.c index 3cfd2c18e..41377bfa1 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -2127,6 +2127,14 @@ void input_enable_softrepeat(struct input_dev *dev, int delay, int period) } EXPORT_SYMBOL(input_enable_softrepeat); +bool input_device_enabled(struct input_dev *dev) +{ + lockdep_assert_held(&dev->mutex); + + return dev->users > 0; +} +EXPORT_SYMBOL_GPL(input_device_enabled); + /** * input_register_device - register device with input core * @dev: device to be registered diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c index f2168e425..b61624190 100644 --- a/drivers/soc/qcom/rpmpd.c +++ b/drivers/soc/qcom/rpmpd.c @@ -116,6 +116,26 @@ struct rpmpd_desc { static DEFINE_MUTEX(rpmpd_lock); +/* msm8916 RPM Power Domains */ +DEFINE_RPMPD_PAIR(msm8916, vddcx, vddcx_ao, SMPA, CORNER, 1); +DEFINE_RPMPD_PAIR(msm8916, vddmx, vddmx_ao, LDOA, CORNER, 3); + +DEFINE_RPMPD_VFC(msm8916, vddcx_vfc, SMPA, 1); + +static struct rpmpd *msm8916_rpmpds[] = { + [MSM8916_VDDCX] = &msm8916_vddcx, + [MSM8916_VDDCX_AO] = &msm8916_vddcx_ao, + [MSM8916_VDDCX_VFC] = &msm8916_vddcx_vfc, + [MSM8916_VDDMX] = &msm8916_vddmx, + [MSM8916_VDDMX_AO] = &msm8916_vddmx_ao, +}; + +static const struct rpmpd_desc msm8916_desc = { + .rpmpds = msm8916_rpmpds, + .num_pds = ARRAY_SIZE(msm8916_rpmpds), + .max_state = MAX_8996_RPMPD_STATE, +}; + /* msm8976 RPM Power Domains */ DEFINE_RPMPD_PAIR(msm8976, vddcx, vddcx_ao, SMPA, LEVEL, 2); DEFINE_RPMPD_PAIR(msm8976, vddmx, vddmx_ao, SMPA, LEVEL, 6); @@ -221,6 +241,7 @@ static const struct rpmpd_desc qcs404_desc = { }; static const struct of_device_id rpmpd_match_table[] = { + { .compatible = "qcom,msm8916-rpmpd", .data = &msm8916_desc }, { .compatible = "qcom,msm8976-rpmpd", .data = &msm8976_desc }, { .compatible = "qcom,msm8996-rpmpd", .data = &msm8996_desc }, { .compatible = "qcom,msm8998-rpmpd", .data = &msm8998_desc }, diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h index 5e61eaf73..83dae2cab 100644 --- a/include/dt-bindings/power/qcom-rpmpd.h +++ b/include/dt-bindings/power/qcom-rpmpd.h @@ -64,6 +64,13 @@ #define RPMH_REGULATOR_LEVEL_TURBO 384 #define RPMH_REGULATOR_LEVEL_TURBO_L1 416 +/* MSM8916 Power Domain Indexes */ +#define MSM8916_VDDCX 0 +#define MSM8916_VDDCX_AO 1 +#define MSM8916_VDDCX_VFC 2 +#define MSM8916_VDDMX 3 +#define MSM8916_VDDMX_AO 4 + /* MSM8976 Power Domain Indexes */ #define MSM8976_VDDCX 0 #define MSM8976_VDDCX_AO 1 diff --git a/include/linux/input.h b/include/linux/input.h index 56f2fd32e..eda4587db 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -502,6 +502,8 @@ bool input_match_device_id(const struct input_dev *dev, void input_enable_softrepeat(struct input_dev *dev, int delay, int period); +bool input_device_enabled(struct input_dev *dev); + extern struct class input_class; /** -- 2.31.1