From b37da9c8e62ef8ea14c19d40837dcd5beb8470e6 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Thu, 19 Dec 2019 09:28:20 -0800 Subject: [PATCH] ARM: dts: sun8i-h3: Add thermal sensor and thermal zones There is just one sensor for the CPU. Signed-off-by: Ondrej Jirman Signed-off-by: Vasily Khoruzhick Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ++++++ 2 files changed, 26 insertions(+) --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -186,6 +186,26 @@ assigned-clocks = <&ccu CLK_GPU>; assigned-clock-rates = <384000000>; }; + + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>; + interrupts = ; + resets = <&ccu RST_BUS_THS>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <0>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; }; }; --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -230,6 +230,12 @@ sid: eeprom@1c14000 { /* compatible is in per SoC .dtsi file */ reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 4>; + }; }; usb_otg: usb@1c19000 {