From d04f7bc8842c0d9951a5740480f864a4f82d6b63 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Sat, 18 Jul 2020 00:00:50 +0800
Subject: [PATCH] arm64: dts: allwinner: h5: Add trip and cooling maps to CPU
 thermal zones

This enables passive cooling by down-regulating CPU voltage and frequency.
The trip points were copied from the H3.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-6-wens@kernel.org
---
 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 30 ++++++++++++++++++++
 1 file changed, 30 insertions(+)

--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -42,6 +42,8 @@
 
 #include <arm/sunxi-h3-h5.dtsi>
 
+#include <dt-bindings/thermal/thermal.h>
+
 / {
 	cpus {
 		#address-cells = <1>;
@@ -54,6 +56,7 @@
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -63,6 +66,7 @@
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -72,6 +76,7 @@
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -81,6 +86,7 @@
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -201,6 +207,30 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal {