oscam.user(5)					       File Formats Manual					    oscam.user(5)



NAME
       oscam.user - user configuration file for OSCam

SYNOPSIS
       The user configuration file for OSCam contains user definitions. [account] sections in oscam.user are recurring (more than
       one account).

DESCRIPTIONS
   The [account] section
       user = name
	  account name, required

       pwd = password
	  password for account, required

       description = text
	  description of user account

       disabled = 0|1
	  1 = account disabled, default:0

       hostname = hostname
	  host from which user connection is allowed

       expdate = <year>-<month>-<day>|<year>/<month>/<day>
	  expiration date for account, default:none

	   example: expdate = 2001-11-21
		    expdate = 2002/12/22

       allowedprotocols = [camd33][,][camd35][,][cs357x][,][cs378x][,][newcamd][,][cccam][,][gbox][,][radegast]
	  list of all allowed connection protocols, default:all connection protocols

       allowedtimeframe = hh:mm-hh:mm
	  account enabled from hh:mm to hh:mm, default:none

       max_connections = count
	  maximum allowed connections per user when unique level will be adducted, default:1

       uniq = 0|1|2|4
	  unique level:

	   0 = disabled (default)
	   1 = only one connection per user is allowed
	   2 = set user to fake if source ip is different
	       (e.g. for newcamd clients with different CAIDs and ports)
	   3 = only one connection per user, but only the last login
	       will survive (old MpCS behavior)
	   4 = set user only to fake if source ip is different,
	       but only the last login will survive

       numusers = quantity
	  anti-cascading: user per account, 0 = anti-cascading disabled, -1 = global value from oscam.conf, default:-1

       penalty = 0|1|2
	  level of penalty:

	   -1 = level of oscam.conf (default)
	    0 = only logging
	    1 = send fake CWs
	    2 = temporary user ban
	    3 = send delayed CWs

       fakedelay = 0|1|milli-seconds
	  set fake delay time individually for user:

	    0 = disable fake delay
	   -1 = fake delay of oscam.conf (default)

       acosc_max_active_sids = count
	  maximum active SIDs with anti-cascading over SID, 0 = unlimited, -1 = use global setting, default:0

       acosc_zap_limit = count
	  zap limit for anti-cascading over SID, 0 = unlimited, -1 = use global setting, default:0

       acosc_penalty = 0|1|2|3|-1
	  level of penalty with anti-cascading over SID count:

	    0 = only logging (default)
	    1 = send fake CWs
	    2 = temporary user ban
	    3 = send delayed CWs
	   -1 = use global setting

       acosc_penalty_duration = seconds
	  penalty duration for anti-cascading over SID count, -1 = use global setting, default:0

       acosc_delay = milli-seconds
	  delay for anti-cascading over SID count, -1 = use global setting, default:0

       failban = 0|2|4|8
	  mask for IP address based blocking:

	   0 = ignore (default)
	   2 = block IP address of a disabled account on connecting
	   4 = block IP address of a sleeping account while sleeping comes up
	   8 = block duplicate IP address

       lb_nbest_readers = counts
	  set count of best readers for load balancing, -1 = use global lb_nbest_readers, default:-1

       lb_nfb_readers = counts
	  set count of fallback readers for load balancing, -1 = use global lb_nfb_readers, default:1

       lb_nbest_percaid = CAID1:count1[,CAID2:count2]...
	  set count of best readers per CAIDs for load balancing, wildcard CAIDs with two-digit CAIDs possible, default:none

	   example: lb_nbest_percaid = 0100:4,0200:3,03:2,04:1
		    (wildcard CAIDs 03xx and 04xx)

       preferlocalcards = 0|1
	  SC decoding behavior:.

	   -1 = global value from oscam.conf (default)
	    0 = local SCs used like a remote reader
	    1 = prefer cache exchange based SCs
	    2 = prefer local SCs

       cwc_disable = 0|1
	  1 = disbale CW cycle check, default:0

       cacheex = 0|1|2|3
	  set cache exchange mode

	   0: disable cache exchange mode (default)
	   1: enable cache exchange pull mode
	   2: enable cache exchange push mode for camd 3.5x / 3.57x and
	      CCcam protocol
	   3: enable reverse cache exchange push mode for camd 3.5x / 3.57x
	      and CCcam protocol

	  Identical cache exchange modes must be set on local OSCam user account and remote OSCam server.

	  Please consider memory consumption.

       cacheex_maxhop = hops
	  define maximum hops for cache exchange, default=10

       no_wait_time = 0|1
	  set wait time behaviour:

	   0: use wait_time set in oscam.conf (default)
	   1: do not use wait_time set in oscam.conf

       csp_ecm_filter = [caid][&mask][@provid][$servid],n
	  cache exchange incoming ECM filter setting (mode 3 only) for Cardservproxy, default:none

       cacheex_drop_csp = 0|1
	  1 = drop incoming Cardservproxy cache (mode 3 only), detection is zero ecmd5, default:0

       cacheex_allow_request = 0|1
	  1 = allow incoming ECM request (mode 3 only), default:1

       cacheex_allow_filter = 0|1
	  1= allow cache exchange filter (for cache exchange mode 3 only), default:1

       cacheex_block_fakecws = 0|1
	  1 = enable fake DCWs blocking (for cache exchange mode 3 only), get fake DCWs form oscam.fakecws, default:0

       sleep = minutes
	  time waiting for inactive user, default:none

       sleepsend = 0|255
	  255 = OSCam client only: stopping requests until next zap, 255 = camd 3.x only: stopping requests until restart of camd
	  3.x client, default:0

       suppresscmd08 = 0|1
	  0 = tell camd 3.5x, 3.57x and 3.78x clients not to request again for rejected CAID, service ID and provider ID combina‐
	  tion, 1 =  disable, default:0

       keepalive = 0|1
	  0 = disable keepalive between server and client for newcamd or CCcam protocol, default:1

       umaxidle = seconds
	  value for user being idle before disconnect, 0 = idle disconnect disabled, -1  use  clientmaxidle  in  global  section,
	  default:-1

       caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:<target CAID>]]...
	  limit and mapping of CAIDs, default:all CAIDs with mask FFFF

	  example: caid = 0100
		   caid = 0200&ffee:0300
		   caid = 0400&ff00:0500,0600
		   caid = 0702,0722
		   caid = 0702&ffdf (shortcut for the example above)

       au = label of reader[,label of reader]...|1
	  AU setting, default:none:

	    label of reader = sending EMMs to specified reader
			      (security issue: clients can see SC data!)
	    1		    = auto AU is sending EMMs to all readers
			      (security issue: clients can see SC data!)

       group = 1..64[,1..64]...
	  user assingment to reader groups, default:none, required

       betatunnel = <CAID>.<ServiceID>:<target CAID>[,<CAID>.<ServiceID>: <target CAID>]...
	  Define Betacrypt tunneling.  The ServiceID can also be used for wildcarded CAIDs.

	   example: betatunnel = 0100.0001:0200,0300.0004:0500
		    betatunnel = 0600.FFFF:0700

	  Be carefull using abbreviations.


       emmreassembly = 0|1||2
	  EMM  reassembly,  should  be	set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is
	  reassembling them instead of just sending them to OSCam for processing.

	    0: disabled
	    1: enabled for DVB API
	    2: enabled (default)

       services = [!]services[,[!]<services>]...
	  user [de]assingment to service group, default:none

       ident = <CAID>:<provid>[,<provid>,...][;<CAID>:<provid>[,<provid>,...]]...
	  user assingment to SC specific idents, default:none

       class = [!]class[,[!]class]...
	  user [de]assingment to SC specific classes, default=none

	   example: class = 01,02,!03,!04

       chid = <CAID>:<ChID>[,<CAID>:<ChID>]...
	  user assingment to SC specific ChIDs, default:none

       monlevel = 0|1|2|3|4
	  monitor level:

	   0 = no access to monitor (default)
	   1 = only server and own procs
	   2 = all procs, but viewing only
	   3 = all procs, reload of oscam.user possible
	   4 = complete access

       cccmaxhops = hops
	  maximum hops limit for CCcam clients, default:10

	   -1 = CCcam disabled for this user
	    0 = local SCs only
	    1 = local SCs + 1 hop
	    2 = local SCs + 2 hops
	   and so on

       cccreshare = level
	  reshare level for CCcam clients

	   -1 = use reshare level of oscam.conf (default)
	    0 = resharing for direct peer only
	    x = resharing for direct peer and share level x

       cccignorereshare = -1|0|1
	  CCcam ignore reshare setting:

	   -1 = use ignore reshare level of oscam.conf (default)
	    0 = use ignore reshare setting of server
	    1 = use ignore reshare setting of reader or user

       cccstealth = -1|1
	  CCcam stealth:

	   -1 = use CCcam stealth of oscam.conf (default)
	    0 = use extended OSCam-CCcam protocol
	    1 = behaviour like the original CCcam: no activate partner
		detection and extended OSCam-CCcam protocol, prevent
		other OSCam to detect the server as OSCam server

EXAMPLES
	[account]
	user	   = username
	pwd	   = password
	group	   = 1
	au	   = myserialmousereader
	services   = myservice
	betatunnel = 0100.0001:0101,0100.0002:0101
	caid	   = 0100
	ident	   = 0100:000000
	uniq	   = 1

SEE ALSO
       list_smargo(1), oscam(1), oscam.ac(5), oscam.cacheex(5), oscam.cert(5), oscam.conf(5), oscam.dvbapi(5),	oscam.fakecws(5),
       oscam.guess(5),	oscam.ird(5),  oscam.provid(5),  oscam.ratelimit(5),  oscam.server(5), oscam.services(5), oscam.tiers(5),
       oscam.srvid(5), oscam.srvid2(5), oscam.whitelist(5)



														    oscam.user(5)
