From: Chris Morgan <macroalpha82@gmail.com>
To: u-boot@lists.denx.de
Cc: andre.przywara@arm.com, kever.yang@rock-chips.com,
	philipp.tomsich@vrull.eu, sjg@chromium.org, jagan@edgeble.ai,
	jonas@kwiboo.se, Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V4 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL
Date: Tue,  2 Jan 2024 09:46:50 -0600	[thread overview]
Message-ID: <20240102154654.191055-4-macroalpha82@gmail.com> (raw)
In-Reply-To: <20240102154654.191055-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Update the rockchip_dnl_key_pressed() so that it can run in
SPL. Also change the ADC channel to a define that can be
overridden by a board specific option.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 arch/arm/mach-rockchip/Makefile    |  4 ++--
 arch/arm/mach-rockchip/boot_mode.c | 11 ++++++++++-
 2 files changed, 12 insertions(+), 3 deletions(-)

--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -15,13 +15,13 @@ obj-tpl-$(CONFIG_ROCKCHIP_PX30) += px30-
 
 obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
 
-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
-
 # Always include boot_mode.o, as we bypass it (i.e. turn it off)
 # inside of boot_mode.c when CONFIG_ROCKCHIP_BOOT_MODE_REG is 0.  This way,
 # we can have the preprocessor correctly recognise both 0x0 and 0
 # meaning "turn it off".
 obj-y += boot_mode.o
+
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o
 obj-$(CONFIG_MISC_INIT_R) += misc.o
 endif
--- a/arch/arm/mach-rockchip/boot_mode.c
+++ b/arch/arm/mach-rockchip/boot_mode.c
@@ -38,6 +38,10 @@ void set_back_to_bootrom_dnl_flag(void)
 #define KEY_DOWN_MIN_VAL	0
 #define KEY_DOWN_MAX_VAL	30
 
+#ifndef RK_DNL_ADC_CHAN
+#define RK_DNL_ADC_CHAN		0
+#endif
+
 __weak int rockchip_dnl_key_pressed(void)
 {
 	unsigned int val;
@@ -52,7 +56,8 @@ __weak int rockchip_dnl_key_pressed(void
 	ret = -ENODEV;
 	uclass_foreach_dev(dev, uc) {
 		if (!strncmp(dev->name, "saradc", 6)) {
-			ret = adc_channel_single_shot(dev->name, 1, &val);
+			ret = adc_channel_single_shot(dev->name,
+						      RK_DNL_ADC_CHAN, &val);
 			break;
 		}
 	}
@@ -73,11 +78,13 @@ __weak int rockchip_dnl_key_pressed(void
 
 void rockchip_dnl_mode_check(void)
 {
+#if CONFIG_IS_ENABLED(ADC)
 	if (rockchip_dnl_key_pressed()) {
 		printf("download key pressed, entering download mode...");
 		set_back_to_bootrom_dnl_flag();
 		do_reset(NULL, 0, 0, NULL);
 	}
+#endif
 }
 
 int setup_boot_mode(void)
@@ -90,6 +97,7 @@ int setup_boot_mode(void)
 	boot_mode = readl(reg);
 	debug("%s: boot mode 0x%08x\n", __func__, boot_mode);
 
+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
 	/* Clear boot mode */
 	writel(BOOT_NORMAL, reg);
 
@@ -103,6 +111,7 @@ int setup_boot_mode(void)
 		env_set("preboot", "setenv preboot; ums mmc 0");
 		break;
 	}
+#endif
 
 	return 0;
 }
--- a/arch/arm/mach-rockchip/rk3568/rk3568.c
+++ b/arch/arm/mach-rockchip/rk3568/rk3568.c
@@ -135,3 +135,26 @@ int arch_cpu_init(void)
 #endif
 	return 0;
 }
+
+#ifdef CONFIG_SPL_BUILD
+
+void __weak led_setup(void)
+{
+}
+
+void spl_board_init(void)
+{
+	led_setup();
+
+#if (CONFIG_IS_ENABLED(DM_REGULATOR))
+	/*
+	 * Turning the eMMC and SPI back on (if disabled via the Qseven
+	 * BIOS_ENABLE) signal is done through a always-on regulator).
+	 */
+	if (regulators_enable_boot_on(false))
+		debug("%s: Cannot enable boot on regulator\n", __func__);
+#endif
+
+	setup_boot_mode();
+}
+#endif