From 091cde88b5ff2a2ca5739ce41f9cf5640a95222f Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 11 Feb 2024 22:24:25 +0100
Subject: [PATCH] ARM: dts: gemini: Map reset keys to KEY_RESTART

This maps the misc "reset", "setup" and "facory reset" keys to the
only key a standard userspace is likely to understand: KEY_RESTART.
On OpenWrt this will simply restart the system under controlled
forms.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240211-gemini-dts-v1-3-6c09adeb4c2e@linaro.org
---
 arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts | 4 ++--
 arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts | 4 ++--
 arch/arm/boot/dts/gemini/gemini-sl93512r.dts      | 2 +-
 arch/arm/boot/dts/gemini/gemini-sq201.dts         | 2 +-
 arch/arm/boot/dts/gemini/gemini-wbd111.dts        | 4 ++--
 arch/arm/boot/dts/gemini/gemini-wbd222.dts        | 4 ++--
 6 files changed, 10 insertions(+), 10 deletions(-)

--- a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
@@ -27,10 +27,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
--- a/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
@@ -33,10 +33,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
 		};
--- a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
@@ -43,7 +43,7 @@
 		button-setup {
 			debounce-interval = <50>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
--- a/arch/arm/boot/dts/gemini/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
@@ -30,7 +30,7 @@
 		button-setup {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
--- a/arch/arm/boot/dts/gemini/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
@@ -28,10 +28,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-setup {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Conflict with ICE */
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
--- a/arch/arm/boot/dts/gemini/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
@@ -27,10 +27,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-setup {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Conflict with ICE */
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;