From d06fdceb579a5dcdb1bc864ec7ca4f8a94bc3cab Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Tue, 9 May 2023 13:52:39 +0100
Subject: [PATCH] ARM: dts: bcm2711-rpi-ds: Group the common pins

Move common pin group declarations into the shared bcm2711-rpi-ds.dtsi.
No functional change.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts  | 121 -------------------------
 arch/arm/boot/dts/bcm2711-rpi-400.dts  | 121 -------------------------
 arch/arm/boot/dts/bcm2711-rpi-cm4.dts  | 121 -------------------------
 arch/arm/boot/dts/bcm2711-rpi-cm4s.dts | 121 -------------------------
 arch/arm/boot/dts/bcm2711-rpi-ds.dtsi  | 121 +++++++++++++++++++++++++
 5 files changed, 121 insertions(+), 484 deletions(-)

--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -310,103 +310,6 @@
 };
 
 &gpio {
-	spi0_pins: spi0_pins {
-		brcm,pins = <9 10 11>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-
-	spi0_cs_pins: spi0_cs_pins {
-		brcm,pins = <8 7>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi3_pins: spi3_pins {
-		brcm,pins = <1 2 3>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi3_cs_pins: spi3_cs_pins {
-		brcm,pins = <0 24>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi4_pins: spi4_pins {
-		brcm,pins = <5 6 7>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi4_cs_pins: spi4_cs_pins {
-		brcm,pins = <4 25>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi5_pins: spi5_pins {
-		brcm,pins = <13 14 15>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi5_cs_pins: spi5_cs_pins {
-		brcm,pins = <12 26>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi6_pins: spi6_pins {
-		brcm,pins = <19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi6_cs_pins: spi6_cs_pins {
-		brcm,pins = <18 27>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	i2c0_pins: i2c0 {
-		brcm,pins = <0 1>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c1_pins: i2c1 {
-		brcm,pins = <2 3>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c3_pins: i2c3 {
-		brcm,pins = <4 5>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c4_pins: i2c4 {
-		brcm,pins = <8 9>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c5_pins: i2c5 {
-		brcm,pins = <12 13>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c6_pins: i2c6 {
-		brcm,pins = <22 23>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2s_pins: i2s {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-
-	sdio_pins: sdio_pins {
-		brcm,pins =     <34 35 36 37 38 39>;
-		brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
-		brcm,pull =     <0 2 2 2 2 2>;
-	};
-
 	bt_pins: bt_pins {
 		brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0
 				 // to fool pinctrl
@@ -431,30 +334,6 @@
 		brcm,function = <BCM2835_FSEL_ALT5>; /* alt5=UART1 */
 		brcm,pull = <0 2 2 0>;
 	};
-
-	uart2_pins: uart2_pins {
-		brcm,pins = <0 1>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart3_pins: uart3_pins {
-		brcm,pins = <4 5>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart4_pins: uart4_pins {
-		brcm,pins = <8 9>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart5_pins: uart5_pins {
-		brcm,pins = <12 13>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
 };
 
 &i2c0if {
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -310,103 +310,6 @@
 };
 
 &gpio {
-	spi0_pins: spi0_pins {
-		brcm,pins = <9 10 11>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-
-	spi0_cs_pins: spi0_cs_pins {
-		brcm,pins = <8 7>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi3_pins: spi3_pins {
-		brcm,pins = <1 2 3>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi3_cs_pins: spi3_cs_pins {
-		brcm,pins = <0 24>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi4_pins: spi4_pins {
-		brcm,pins = <5 6 7>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi4_cs_pins: spi4_cs_pins {
-		brcm,pins = <4 25>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi5_pins: spi5_pins {
-		brcm,pins = <13 14 15>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi5_cs_pins: spi5_cs_pins {
-		brcm,pins = <12 26>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi6_pins: spi6_pins {
-		brcm,pins = <19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi6_cs_pins: spi6_cs_pins {
-		brcm,pins = <18 27>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	i2c0_pins: i2c0 {
-		brcm,pins = <0 1>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c1_pins: i2c1 {
-		brcm,pins = <2 3>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c3_pins: i2c3 {
-		brcm,pins = <4 5>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c4_pins: i2c4 {
-		brcm,pins = <8 9>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c5_pins: i2c5 {
-		brcm,pins = <12 13>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c6_pins: i2c6 {
-		brcm,pins = <22 23>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2s_pins: i2s {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-
-	sdio_pins: sdio_pins {
-		brcm,pins =     <34 35 36 37 38 39>;
-		brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
-		brcm,pull =     <0 2 2 2 2 2>;
-	};
-
 	bt_pins: bt_pins {
 		brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0
 				 // to fool pinctrl
@@ -431,30 +334,6 @@
 		brcm,function = <BCM2835_FSEL_ALT5>; /* alt5=UART1 */
 		brcm,pull = <0 2 2 0>;
 	};
-
-	uart2_pins: uart2_pins {
-		brcm,pins = <0 1>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart3_pins: uart3_pins {
-		brcm,pins = <4 5>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart4_pins: uart4_pins {
-		brcm,pins = <8 9>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart5_pins: uart5_pins {
-		brcm,pins = <12 13>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
 };
 
 &i2c0if {
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
@@ -319,103 +319,6 @@
 };
 
 &gpio {
-	spi0_pins: spi0_pins {
-		brcm,pins = <9 10 11>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-
-	spi0_cs_pins: spi0_cs_pins {
-		brcm,pins = <8 7>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi3_pins: spi3_pins {
-		brcm,pins = <1 2 3>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi3_cs_pins: spi3_cs_pins {
-		brcm,pins = <0 24>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi4_pins: spi4_pins {
-		brcm,pins = <5 6 7>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi4_cs_pins: spi4_cs_pins {
-		brcm,pins = <4 25>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi5_pins: spi5_pins {
-		brcm,pins = <13 14 15>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi5_cs_pins: spi5_cs_pins {
-		brcm,pins = <12 26>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi6_pins: spi6_pins {
-		brcm,pins = <19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi6_cs_pins: spi6_cs_pins {
-		brcm,pins = <18 27>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	i2c0_pins: i2c0 {
-		brcm,pins = <0 1>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c1_pins: i2c1 {
-		brcm,pins = <2 3>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c3_pins: i2c3 {
-		brcm,pins = <4 5>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c4_pins: i2c4 {
-		brcm,pins = <8 9>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c5_pins: i2c5 {
-		brcm,pins = <12 13>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c6_pins: i2c6 {
-		brcm,pins = <22 23>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2s_pins: i2s {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-
-	sdio_pins: sdio_pins {
-		brcm,pins =     <34 35 36 37 38 39>;
-		brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
-		brcm,pull =     <0 2 2 2 2 2>;
-	};
-
 	bt_pins: bt_pins {
 		brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0
 				 // to fool pinctrl
@@ -440,30 +343,6 @@
 		brcm,function = <BCM2835_FSEL_ALT5>; /* alt5=UART1 */
 		brcm,pull = <0 2 2 0>;
 	};
-
-	uart2_pins: uart2_pins {
-		brcm,pins = <0 1>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart3_pins: uart3_pins {
-		brcm,pins = <4 5>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart4_pins: uart4_pins {
-		brcm,pins = <8 9>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart5_pins: uart5_pins {
-		brcm,pins = <12 13>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
 };
 
 &i2c0if {
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4s.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4s.dts
@@ -200,132 +200,11 @@
 };
 
 &gpio {
-	spi0_pins: spi0_pins {
-		brcm,pins = <9 10 11>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-
-	spi0_cs_pins: spi0_cs_pins {
-		brcm,pins = <8 7>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi3_pins: spi3_pins {
-		brcm,pins = <1 2 3>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi3_cs_pins: spi3_cs_pins {
-		brcm,pins = <0 24>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi4_pins: spi4_pins {
-		brcm,pins = <5 6 7>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi4_cs_pins: spi4_cs_pins {
-		brcm,pins = <4 25>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi5_pins: spi5_pins {
-		brcm,pins = <13 14 15>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi5_cs_pins: spi5_cs_pins {
-		brcm,pins = <12 26>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	spi6_pins: spi6_pins {
-		brcm,pins = <19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	spi6_cs_pins: spi6_cs_pins {
-		brcm,pins = <18 27>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	i2c0_pins: i2c0 {
-		brcm,pins = <0 1>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c1_pins: i2c1 {
-		brcm,pins = <2 3>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c3_pins: i2c3 {
-		brcm,pins = <4 5>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c4_pins: i2c4 {
-		brcm,pins = <8 9>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c5_pins: i2c5 {
-		brcm,pins = <12 13>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2c6_pins: i2c6 {
-		brcm,pins = <22 23>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-		brcm,pull = <BCM2835_PUD_UP>;
-	};
-
-	i2s_pins: i2s {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-
-	sdio_pins: sdio_pins {
-		brcm,pins =     <34 35 36 37 38 39>;
-		brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
-		brcm,pull =     <0 2 2 2 2 2>;
-	};
-
 	uart0_pins: uart0_pins {
 		brcm,pins;
 		brcm,function;
 		brcm,pull;
 	};
-
-	uart2_pins: uart2_pins {
-		brcm,pins = <0 1>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart3_pins: uart3_pins {
-		brcm,pins = <4 5>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart4_pins: uart4_pins {
-		brcm,pins = <8 9>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
-
-	uart5_pins: uart5_pins {
-		brcm,pins = <12 13>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <0 2>;
-	};
 };
 
 &i2c0if {
--- a/arch/arm/boot/dts/bcm2711-rpi-ds.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi-ds.dtsi
@@ -171,6 +171,127 @@
 &gpio {
 	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi3_pins: spi3_pins {
+		brcm,pins = <1 2 3>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi3_cs_pins: spi3_cs_pins {
+		brcm,pins = <0 24>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi4_pins: spi4_pins {
+		brcm,pins = <5 6 7>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi4_cs_pins: spi4_cs_pins {
+		brcm,pins = <4 25>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi5_pins: spi5_pins {
+		brcm,pins = <13 14 15>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi5_cs_pins: spi5_cs_pins {
+		brcm,pins = <12 26>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi6_pins: spi6_pins {
+		brcm,pins = <19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi6_cs_pins: spi6_cs_pins {
+		brcm,pins = <18 27>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c3_pins: i2c3 {
+		brcm,pins = <4 5>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c4_pins: i2c4 {
+		brcm,pins = <8 9>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c5_pins: i2c5 {
+		brcm,pins = <12 13>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c6_pins: i2c6 {
+		brcm,pins = <22 23>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+
+	sdio_pins: sdio_pins {
+		brcm,pins =     <34 35 36 37 38 39>;
+		brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
+		brcm,pull =     <0 2 2 2 2 2>;
+	};
+
+	uart2_pins: uart2_pins {
+		brcm,pins = <0 1>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+
+	uart3_pins: uart3_pins {
+		brcm,pins = <4 5>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+
+	uart4_pins: uart4_pins {
+		brcm,pins = <8 9>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+
+	uart5_pins: uart5_pins {
+		brcm,pins = <12 13>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
 };
 
 &emmc2 {