From 8f8cab9d3e90acf1db278ef44ad05f10aefb973f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= Date: Thu, 6 Jul 2023 11:37:35 -0400 Subject: [PATCH 28/42] thermal/drivers/mediatek/lvts_thermal: Disable undesired interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Out of the many interrupts supported by the hardware, the only ones of interest to the driver currently are: * The temperature went over the high offset threshold, for any of the sensors * The temperature went below the low offset threshold, for any of the sensors * The temperature went over the stage3 threshold These are the only thresholds configured by the driver through the OFFSETH, OFFSETL, and PROTTC registers, respectively. The current interrupt mask in LVTS_MONINT_CONF, enables many more interrupts, including data ready on sensors for both filtered and immediate mode. These are not only not handled by the driver, but they are also triggered too often, causing unneeded overhead. Disable these unnecessary interrupts. The meaning of each bit can be seen in the comment describing LVTS_MONINTST in the IRQ handler. Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") Signed-off-by: Nícolas F. R. A. Prado Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Alexandre Mergnat Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20230706153823.201943-5-nfraprado@collabora.com --- drivers/thermal/mediatek/lvts_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -65,7 +65,7 @@ #define LVTS_HW_FILTER 0x2 #define LVTS_TSSEL_CONF 0x13121110 #define LVTS_CALSCALE_CONF 0x300 -#define LVTS_MONINT_CONF 0x9FBF7BDE +#define LVTS_MONINT_CONF 0x8300318C #define LVTS_INT_SENSOR0 0x0009001F #define LVTS_INT_SENSOR1 0x001203E0