From 004157ce74543694981c461e95ac0cc1fa8721d7 Mon Sep 17 00:00:00 2001 From: Sam Shih Date: Fri, 2 Jun 2023 13:06:25 +0800 Subject: [PATCH] [high-speed-io][999-2611-phy-phy-mtk-tphy-add-support-efuse-setting.patch] --- drivers/phy/mediatek/phy-mtk-tphy.c | 195 ++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index c6e073401..fcf8c845f 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -41,11 +42,16 @@ #define SSUSB_SIFSLV_V2_U3PHYD 0x200 #define SSUSB_SIFSLV_V2_U3PHYA 0x400 +#define U3P_MISC_REG1 0x04 +#define MR1_EFUSE_AUTO_LOAD_DIS BIT(6) + #define U3P_USBPHYACR0 0x000 #define PA0_RG_U2PLL_FORCE_ON BIT(15) #define PA0_RG_USB20_INTR_EN BIT(5) #define U3P_USBPHYACR1 0x004 +#define PA1_RG_INTR_CAL GENMASK(23, 19) +#define PA1_RG_INTR_CAL_VAL(x) ((0x1f & (x)) << 19) #define PA1_RG_VRT_SEL GENMASK(14, 12) #define PA1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12) #define PA1_RG_TERM_SEL GENMASK(10, 8) @@ -117,6 +123,8 @@ #define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24) #define U3P_U3_PHYA_REG0 0x000 +#define P3A_RG_IEXT_INTR GENMASK(15, 10) +#define P3A_RG_IEXT_INTR_VAL(x) ((0x3f & (x)) << 10) #define P3A_RG_CLKDRV_OFF GENMASK(3, 2) #define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2) @@ -171,6 +179,25 @@ #define P3D_RG_FWAKE_TH GENMASK(21, 16) #define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16) +#define U3P_U3_PHYD_IMPCAL0 0x010 +#define P3D_RG_FORCE_TX_IMPEL BIT(31) +#define P3D_RG_TX_IMPEL GENMASK(28, 24) +#define P3D_RG_TX_IMPEL_VAL(x) ((0x1f & (x)) << 24) + +#define U3P_U3_PHYD_IMPCAL1 0x014 +#define P3D_RG_FORCE_RX_IMPEL BIT(31) +#define P3D_RG_RX_IMPEL GENMASK(28, 24) +#define P3D_RG_RX_IMPEL_VAL(x) ((0x1f & (x)) << 24) + +#define U3P_U3_PHYD_RX0 0x02c + +#define U3P_U3_PHYD_T2RLB 0x030 + +#define U3P_U3_PHYD_PIPE0 0x040 + +#define U3P_U3_PHYD_RSV 0x054 +#define P3D_RG_EFUSE_AUTO_LOAD_DIS BIT(12) + #define U3P_U3_PHYD_CDR1 0x05c #define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) #define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24) @@ -280,11 +307,23 @@ enum mtk_phy_version { MTK_PHY_V1 = 1, MTK_PHY_V2, + MTK_PHY_V3, }; struct mtk_phy_pdata { /* avoid RX sensitivity level degradation only for mt8173 */ bool avoid_rx_sen_degradation; + /* + * u2phy should use integer mode instead of fractional mode of + * 48M PLL, fix it by switching PLL to 26M from default 48M + * for mt8195 + */ + bool sx_pll_48m_to_26m; + /* + * Some SoCs (e.g. mt8195) drop a bit when use auto load efuse, + * support sw way, also support it for v2/v3 optionally. + */ + bool sw_efuse_supported; enum mtk_phy_version version; }; @@ -309,6 +348,10 @@ struct mtk_phy_instance { struct u3phy_banks u3_banks; }; struct clk *ref_clk; /* reference clock of anolog phy */ + u32 efuse_sw_en; + u32 efuse_intr; + u32 efuse_tx_imp; + u32 efuse_rx_imp; u32 index; u32 type; struct regmap *type_sw; @@ -970,6 +1013,139 @@ static int phy_type_set(struct mtk_phy_instance *instance) return 0; } +static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instance) +{ + struct device *dev = &instance->phy->dev; + int ret = 0; + + dev_err(dev, "try to get sw efuse\n"); + + /* tphy v1 doesn't support sw efuse, skip it */ + if (!tphy->pdata->sw_efuse_supported) { + instance->efuse_sw_en = 0; + return 0; + } + + /* software efuse is optional */ + instance->efuse_sw_en = device_property_read_bool(dev, "nvmem-cells"); + if (!instance->efuse_sw_en) + return 0; + + dev_err(dev, "try to get sw efuse+\n"); + + switch (instance->type) { + case PHY_TYPE_USB2: + ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr); + if (ret) { + dev_err(dev, "fail to get u2 intr efuse, %d\n", ret); + break; + } + + /* no efuse, ignore it */ + if (!instance->efuse_intr) { + dev_warn(dev, "no u2 intr efuse, but dts enable it\n"); + instance->efuse_sw_en = 0; + break; + } + + dev_info(dev, "u2 efuse - intr %x\n", instance->efuse_intr); + break; + case PHY_TYPE_USB3: + case PHY_TYPE_PCIE: + ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr); + if (ret) { + dev_err(dev, "fail to get u3 intr efuse, %d\n", ret); + break; + } + + ret = nvmem_cell_read_variable_le_u32(dev, "rx_imp", &instance->efuse_rx_imp); + if (ret) { + dev_err(dev, "fail to get u3 rx_imp efuse, %d\n", ret); + break; + } + + ret = nvmem_cell_read_variable_le_u32(dev, "tx_imp", &instance->efuse_tx_imp); + if (ret) { + dev_err(dev, "fail to get u3 tx_imp efuse, %d\n", ret); + break; + } + + /* no efuse, ignore it */ + if (!instance->efuse_intr && + !instance->efuse_rx_imp && + !instance->efuse_tx_imp) { + dev_warn(dev, "no u3 intr efuse, but dts enable it\n"); + instance->efuse_sw_en = 0; + break; + } + + dev_info(dev, "u3 efuse - intr %x, rx_imp %x, tx_imp %x\n", + instance->efuse_intr, instance->efuse_rx_imp, + instance->efuse_tx_imp); + break; + default: + dev_err(dev, "no sw efuse for type %d\n", instance->type); + ret = -EINVAL; + } + + return ret; +} + +static void phy_efuse_set(struct mtk_phy_instance *instance) +{ + struct device *dev = &instance->phy->dev; + struct u2phy_banks *u2_banks = &instance->u2_banks; + struct u3phy_banks *u3_banks = &instance->u3_banks; + u32 tmp; + + if (!instance->efuse_sw_en) + return; + + switch (instance->type) { + case PHY_TYPE_USB2: + tmp = readl(u2_banks->misc + U3P_MISC_REG1); + tmp |= MR1_EFUSE_AUTO_LOAD_DIS; + writel(tmp, u2_banks->misc + U3P_MISC_REG1); + + tmp = readl(u2_banks->com + U3P_USBPHYACR1); + tmp &= ~PA1_RG_INTR_CAL; + tmp |= PA1_RG_INTR_CAL_VAL(instance->efuse_intr); + writel(tmp, u2_banks->com + U3P_USBPHYACR1); + pr_err("%s set efuse intr %x\n", __func__, instance->efuse_intr); + + break; + case PHY_TYPE_USB3: + case PHY_TYPE_PCIE: + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV); + tmp |= P3D_RG_EFUSE_AUTO_LOAD_DIS; + writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RSV); + + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0); + tmp &= ~P3D_RG_TX_IMPEL; + tmp |= P3D_RG_TX_IMPEL_VAL(instance->efuse_tx_imp); + tmp |= P3D_RG_FORCE_TX_IMPEL; + writel(tmp, u3_banks->phyd + U3P_U3_PHYD_IMPCAL0); + + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1); + tmp &= ~P3D_RG_RX_IMPEL; + tmp |= P3D_RG_RX_IMPEL_VAL(instance->efuse_rx_imp); + tmp |= P3D_RG_FORCE_RX_IMPEL; + writel(tmp, u3_banks->phyd + U3P_U3_PHYD_IMPCAL1); + + tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0); + tmp &= ~P3A_RG_IEXT_INTR; + tmp |= P3A_RG_IEXT_INTR_VAL(instance->efuse_intr); + writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG0); + pr_err("%s set efuse, tx_imp %x, rx_imp %x intr %x\n", + __func__, instance->efuse_tx_imp, + instance->efuse_rx_imp, instance->efuse_intr); + break; + default: + dev_warn(dev, "no sw efuse for type %d\n", instance->type); + } +} + + static int mtk_phy_init(struct phy *phy) { struct mtk_phy_instance *instance = phy_get_drvdata(phy); @@ -988,6 +1164,8 @@ static int mtk_phy_init(struct phy *phy) return ret; } + phy_efuse_set(instance); + switch (instance->type) { case PHY_TYPE_USB2: u2_phy_instance_init(tphy, instance); @@ -1072,6 +1250,7 @@ static struct phy *mtk_phy_xlate(struct device *dev, struct mtk_phy_instance *instance = NULL; struct device_node *phy_np = args->np; int index; + int ret; if (args->args_count != 1) { dev_err(dev, "invalid number of cells in 'phy' property\n"); @@ -1108,6 +1287,10 @@ static struct phy *mtk_phy_xlate(struct device *dev, return ERR_PTR(-EINVAL); } + ret = phy_efuse_get(tphy, instance); + if (ret) + return ERR_PTR(ret); + phy_parse_property(tphy, instance); phy_type_set(instance); @@ -1130,14 +1313,26 @@ static const struct mtk_phy_pdata tphy_v1_pdata = { static const struct mtk_phy_pdata tphy_v2_pdata = { .avoid_rx_sen_degradation = false, + .sw_efuse_supported = true, .version = MTK_PHY_V2, }; +static const struct mtk_phy_pdata tphy_v3_pdata = { + .sw_efuse_supported = true, + .version = MTK_PHY_V3, +}; + static const struct mtk_phy_pdata mt8173_pdata = { .avoid_rx_sen_degradation = true, .version = MTK_PHY_V1, }; +static const struct mtk_phy_pdata mt8195_pdata = { + .sx_pll_48m_to_26m = true, + .sw_efuse_supported = true, + .version = MTK_PHY_V3, +}; + static const struct of_device_id mtk_tphy_id_table[] = { { .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata }, { .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata }, -- 2.34.1