Source-Makefile: feeds/packages/admin/zabbix/Makefile
Package: zabbix-agent
Submenu: zabbix
Version: 2.4.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: admin
Category: Administration
Title: Zabbix agent
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: zabbix-2.4.3.tar.gz
Type: ipkg
Description: Zabbix agent
http://www.zabbix.com/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@

Package: zabbix-agentd
Submenu: zabbix
Version: 2.4.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: admin
Category: Administration
Title: Zabbix agentd
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: zabbix-2.4.3.tar.gz
Type: ipkg
Description: Zabbix agentd
http://www.zabbix.com/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@

Package: zabbix-extra-mac80211
Submenu: zabbix
Version: 2.4.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zabbix-agentd @PACKAGE_MAC80211_DEBUGFS @KERNEL_DEBUG_FS
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: admin
Category: Administration
Title: Zabbix discovery/userparameters for mac80211
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: zabbix-2.4.3.tar.gz
Type: ipkg
Description: An extra package for zabbix-agentd that adds a discovery rule for mac80211 wifi phy and many userparameters.
It contains an suid helper to allow zabbix-agentd to still run as zabbix user and not as root.
See http://wiki.openwrt.org/doc/howto/zabbix for ready to use zabbix templates.
http://www.zabbix.com/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@

Package: zabbix-extra-network
Submenu: zabbix
Version: 2.4.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zabbix-agentd +libuci-lua +lua
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: admin
Category: Administration
Title: Zabbix discovery/userparameters for network
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: zabbix-2.4.3.tar.gz
Type: ipkg
Description: An extra package for zabbix-agentd that adds a discovery rule for openwrt network interfaces.
The idea here is to discover only interfaces listed in /etc/config/network (discover br-lan and not eth0.1 and wlan0)
See http://wiki.openwrt.org/doc/howto/zabbix for ready to use zabbix templates.
http://www.zabbix.com/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@

Package: zabbix-extra-wifi
Submenu: zabbix
Version: 2.4.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zabbix-agentd +libiwinfo-lua +libuci-lua +lua
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: admin
Category: Administration
Title: Zabbix discovery/userparameters for wifi
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: zabbix-2.4.3.tar.gz
Type: ipkg
Description: An extra package for zabbix-agentd that adds a discovery rule for wifi interfaces and many userparameters.
As it uses libiwinfo, it works with all wifi devices supported by openwrt.
See http://wiki.openwrt.org/doc/howto/zabbix for ready to use zabbix templates.
http://www.zabbix.com/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@

Package: zabbix-sender
Submenu: zabbix
Version: 2.4.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: admin
Category: Administration
Title: Zabbix sender
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: zabbix-2.4.3.tar.gz
Type: ipkg
Description: Zabbix sender
http://www.zabbix.com/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@

Package: zabbix-server
Submenu: zabbix
Version: 2.4.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libsqlite3
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: admin
Category: Administration
Title: Zabbix server
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: zabbix-2.4.3.tar.gz
Type: ipkg
Description: Zabbix server
http://www.zabbix.com/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@

Package: zabbix-proxy
Submenu: zabbix
Version: 2.4.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libsqlite3
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: admin
Category: Administration
Title: Zabbix proxy
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: zabbix-2.4.3.tar.gz
Type: ipkg
Description: Zabbix proxy
http://www.zabbix.com/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@

Package: zabbix-get
Submenu: zabbix
Version: 2.4.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: admin
Category: Administration
Title: Zabbix get
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: zabbix-2.4.3.tar.gz
Type: ipkg
Description: Zabbix get
http://www.zabbix.com/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@


Source-Makefile: feeds/packages/admin/debootstrap/Makefile
Package: debootstrap
Version: 1.0.64~bpo70+1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +coreutils +coreutils-chroot +coreutils-sha1sum
Menu-Depends: 
Provides: 
Section: admin
Category: Administration
Title: Bootstrap a basic Debian system
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: debootstrap-udeb_1.0.64~bpo70+1_all.udeb
Type: ipkg
Description:  debootstrap is used to create a Debian base system from scratch, without
 requiring the availability of dpkg or apt. It does this by downloading .deb
 files from a mirror site, and carefully unpacking them into a directory which
 can eventually be chrooted into.
http://wiki.debian.org/Debootstrap
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/admin/muninlite/Makefile
Package: muninlite
Version: 1.0.4-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +xinetd
Menu-Depends: 
Provides: 
Section: admin
Category: Administration
Title: Munin node implemented in shell
Maintainer: Jonathan McCrohan <jmccrohan@gmail.com>
Source: muninlite-1.0.4.tar.gz
Type: ipkg
Description: Munin node implemented in shell
http://sourceforge.net/projects/muninlite/
Jonathan McCrohan <jmccrohan@gmail.com>
@@


Source-Makefile: feeds/packages/admin/htop/Makefile
Package: htop
Version: 1.0.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncurses
Menu-Depends: 
Provides: 
Section: admin
Category: Administration
Title: Interactive processes viewer
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: htop-1.0.3.tar.gz
Type: ipkg
Description:  Htop is an ncursed-based process viewer similar to top, but
 it allows to scroll the list vertically and horizontally to
 see all processes and their full command lines.
http://htop.sourceforge.net/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@


Source-Makefile: feeds/packages/admin/monit/Makefile
Package: monit
Version: 5.10-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: admin
Category: Administration
Title: System services monitoring utility (with SSL support)
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: monit-5.10.tar.gz
Type: ipkg
Description: 	An utility for monitoring services on a Unix system
	This package is built with SSL support.
http://mmonit.com/monit/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@

Package: monit-nossl
Version: 5.10-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: admin
Category: Administration
Title: System services monitoring utility (without SSL support)
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: monit-5.10.tar.gz
Type: ipkg
Description: 	An utility for monitoring services on a Unix system
	This package is built without SSL support.
http://mmonit.com/monit/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@


Source-Makefile: feeds/packages/libs/libpam/Makefile
Package: libpam
Version: 1.1.8-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: the Linux-PAM libraries and modules.
Maintainer: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
Source: Linux-PAM-1.1.8.tar.bz2
Type: ipkg
Description: 	The Linux-PAM Pluggable Authentication Modules.
http://www.kernel.org/pub/linux/libs/pam
Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
@@


Source-Makefile: feeds/packages/libs/libftdi/Makefile
Package: libftdi
Version: 0.20-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libusb-compat
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Library to talk to FTDI chips
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: libftdi-0.20.tar.gz
Type: ipkg
Description:   libFTDI - FTDI USB driver with bitbang mode
  libFTDI is an open source library to talk to FTDI chips: FT232BM, FT245BM, FT2232C, FT2232H, FT4232H, FT2232D and FT245R, including the popular bitbang mode. 
  The library is linked with your program in userspace, no kernel driver required.
http://www.intra2net.com/en/developer/libftdi/
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/libs/libmpdclient/Makefile
Package: libmpdclient
Version: 2.7-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: libmpdclient
Maintainer: Ted Hess <thess@kitschensync.net>
Source: libmpdclient-2.7.tar.bz2
Type: ipkg
Description:     A stable, documented, asynchronous API library for interfacing MPD in the C, C++ & Objective C languages.
http://mpd.wikia.com/wiki/ClientLib:libmpdclient
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/engine_pkcs11/Makefile
Package: engine_pkcs11
Version: 20131021-5abdc7e0d6d519d2514e3eccc116b335bc427254
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +libp11
Menu-Depends: 
Provides: 
Build-Depends: libtool libintl libiconv
Section: libs
Category: Libraries
Title: PKCS
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: engine_pkcs11-20131021.tar.gz
Type: ipkg
Description:   engine_pkcs11 is an implementation of OpenSSL engine interface.
https://www.opensc-project.org/opensc/wiki/
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/libs/apr/Makefile
Package: libapr
Version: 1.5.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +librt +libuuid
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Apache Portable Runtime Library
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: apr-1.5.1.tar.bz2
Type: ipkg
Description: Apache Portable Runtime Library
http://apr.apache.org/
Thomas Heil <heil@terminal-consulting.de>
@@


Source-Makefile: feeds/packages/libs/libid3tag/Makefile
Package: libid3tag
Version: 0.15.1b-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: An ID3 tag manipulation library
Maintainer: Ted Hess <thess@kitschensync.net>
Source: libid3tag-0.15.1b.tar.gz
Type: ipkg
Description: 	libid3tag is a library for reading and (eventually) writing ID3 tags, both
	ID3v1 and the various versions of ID3v2.
http://mad.sourceforge.net/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/libmpeg2/Makefile
Package: libmpeg2
Version: 0.5.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: MPEG-1 & -2 decoding library
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: libmpeg2-0.5.1.tar.gz
Type: ipkg
Description: MPEG-1 & -2 decoding library
http://libmpeg2.sourceforge.net/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/libs/protobuf/Makefile
Package: protobuf
Version: 2.5.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib +libpthread +libstdcpp
Menu-Depends: 
Provides: 
Build-Depends: protobuf/host
Build-Types: host
Section: libs
Category: Libraries
Title: A structured data encoding library
Maintainer: Obinou <obconseil@gmail.com>
Source: protobuf-2.5.0.tar.bz2
Type: ipkg
Description:  Protocol Buffers are a way of encoding structured data in an efficient
 yet extensible format. Google uses Protocol Buffers for almost all
 of its internal RPC protocols and file formats.
http://code.google.com/p/protobuf/
Obinou <obconseil@gmail.com>
@@


Source-Makefile: feeds/packages/libs/libogg/Makefile
Package: libogg
Version: 1.3.2-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: libogg
Maintainer: Ted Hess <thess@kitschensync.net>
Source: libogg-1.3.2.tar.xz
Type: ipkg
Description: Ogg project codecs use the Ogg bitstream format to arrange the raw,
compressed bitstream into a more robust, useful form.  For example,
the Ogg bitstream makes seeking, time stamping and error recovery
possible, as well as mixing several sepearate, concurrent media
streams into a single physical bitstream.
http://xiph.org/ogg/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/libgpg-error/Makefile
Package: libgpg-error
Version: 1.12-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: GnuPG error handling helper library
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: libgpg-error-1.12.tar.bz2
Type: ipkg
Description: 	An helper library for common error codes and descriptions.
	This is a library that defines common error values for all GnuPG
	components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
	Libksba, DirMngr, Pinentry, SmartCard Daemon and possibly more in the
	future.
http://www.gnupg.org/related_software/libgpg-error/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/libs/libaudiofile/Makefile
Package: libaudiofile
Version: 0.3.6-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libflac +libstdcpp
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Audio File library
Maintainer: Ted Hess <thess@kitschensync.net>
Source: audiofile-0.3.6.tar.gz
Type: ipkg
Description:  The audiofile library allows the processing of audio data to and from audio
 files of many common formats (currently AIFF, AIFF-C, WAVE, NeXT/Sun, BICS,
 FLAC, ALAC, and raw data).
http://www.68k.org/~michael/audiofile/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/libjpeg/Makefile
Package: libjpeg
Version: 6b-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Depends: libltdl
Build-Types: host
Section: libs
Category: Libraries
Title: The Independent JPEG Group's JPEG runtime library
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: jpegsrc.v6b.tar.gz
Type: ipkg
Description: The Independent JPEG Group's JPEG runtime library
http://www.ijg.org/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: jpeg-tools
Version: 6b-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libjpeg
Menu-Depends: 
Provides: 
Build-Depends: libltdl
Build-Types: host
Section: utils
Category: Utilities
Title: The Independent JPEG Group's JPEG manipulation tools
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: jpegsrc.v6b.tar.gz
Type: ipkg
Description: The Independent JPEG Group's JPEG manipulation tools
http://www.ijg.org/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/libs/pcre/Makefile
Package: libpcre
Version: 8.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: A Perl Compatible Regular Expression library
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: pcre-8.35.tar.bz2
Type: ipkg
Description: A Perl Compatible Regular Expression library
http://www.pcre.org/
Thomas Heil <heil@terminal-consulting.de>
@@

Package: libpcrecpp
Version: 8.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpcre +libstdcpp
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: C++ wrapper for Perl Compatible Regular Expression library
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: pcre-8.35.tar.bz2
Type: ipkg
Description: C++ wrapper for Perl Compatible Regular Expression library
http://www.pcre.org/
Thomas Heil <heil@terminal-consulting.de>
@@


Source-Makefile: feeds/packages/libs/flac/Makefile
Package: libflac
Version: 1.2.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Free Lossless Audio Codec library
Maintainer: Ted Hess <thess@kitschensync.net>
Source: flac-1.2.1.tar.gz
Type: ipkg
Description: Free Lossless Audio Codec library
http://flac.sourceforge.net/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/sqlite3/Makefile
Package: libsqlite3
Submenu: database
Version: 3080704-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread
Menu-Depends: 
Provides: 
Build-Depends: libncurses libreadline
Section: libs
Category: Libraries
Title: SQLite (v3.x) database engine (library)
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: sqlite-autoconf-3080704.tar.gz
Type: ipkg
Description:  SQLite is a small C library that implements a self-contained, embeddable,
 zero-configuration SQL database engine.
 This package contains the SQLite (v3.x) shared library, used by other
 programs.
http://www.sqlite.org/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@

Package: sqlite3-cli
Submenu: database
Version: 3080704-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libsqlite3 +libncurses +libreadline
Menu-Depends: 
Provides: 
Build-Depends: libncurses libreadline
Section: utils
Category: Utilities
Title: SQLite (v3.x) database engine (cli)
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: sqlite-autoconf-3080704.tar.gz
Type: ipkg
Description:  SQLite is a small C library that implements a self-contained, embeddable,
 zero-configuration SQL database engine.
 This package contains a terminal-based front-end to the SQLite (v3.x) library
 that can evaluate queries interactively and display the results in multiple
 formats.
http://www.sqlite.org/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@


Source-Makefile: feeds/packages/libs/tiff/Makefile
Package: libtiff
Version: 4.0.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib +libjpeg
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: TIFF library
Maintainer: Jiri Slachta <slachta@cesnet.cz>
Source: tiff-4.0.3.tar.gz
Type: ipkg
Description: TIFF library
http://www.remotesensing.org/libtiff/
Jiri Slachta <slachta@cesnet.cz>
@@

Package: libtiffxx
Version: 4.0.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libtiff +USE_UCLIBCXX:uclibcxx +USE_LIBSTDCXX:libstdcpp
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: TIFF library(c++ bindings)
Maintainer: Jiri Slachta <slachta@cesnet.cz>
Source: tiff-4.0.3.tar.gz
Type: ipkg
Description: TIFF library(c++ bindings)
http://www.remotesensing.org/libtiff/
Jiri Slachta <slachta@cesnet.cz>
@@

Package: tiff-utils
Version: 4.0.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libtiff
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: TIFF utilities
Maintainer: Jiri Slachta <slachta@cesnet.cz>
Source: tiff-4.0.3.tar.gz
Type: ipkg
Description: TIFF utilities
http://www.remotesensing.org/libtiff/
Jiri Slachta <slachta@cesnet.cz>
@@


Source-Makefile: feeds/packages/libs/libtasn1/Makefile
Package: libtasn1
Version: 4.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: An ASN.1 and DER structures manipulation library
Maintainer: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
Source: libtasn1-4.4.tar.gz
Type: ipkg
Description:  This is a library for Abstract Syntax Notation One (ASN.1) and
 Distinguish Encoding Rules (DER) manipulation.
ftp://ftp.gnu.org/gnu/libtasn1/
Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
@@


Source-Makefile: feeds/packages/libs/faad2/Makefile
Package: faad2
Version: 2.7-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libfaad2
Menu-Depends: 
Provides: 
Section: sound
Category: Sound
Title: Freeware Advanced Audio Decoder player
Maintainer: Ted Hess <thess@kitschensync.net>
Source: faad2-2.7.tar.bz2
Type: ipkg
Description: 	FAAD2 is the fastest ISO AAC audio decoder available.
	FAAD2 correctly decodes all MPEG-4 and MPEG-2 MAIN,
	LOW, LTP, LD and ER object type AAC files.
  This package contains a binary to play AAC or MP4 files.
http://www.audiocoding.com/faad2.html
Ted Hess <thess@kitschensync.net>
@@

Package: libfaad2
Menu: 1
Version: 2.7-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread @BUILD_PATENTED
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Freeware Advanced Audio Decoder library
Maintainer: Ted Hess <thess@kitschensync.net>
Source: faad2-2.7.tar.bz2
Type: ipkg
Description: 	FAAD2 is the fastest ISO AAC audio decoder available.
	FAAD2 correctly decodes all MPEG-4 and MPEG-2 MAIN,
	LOW, LTP, LD and ER object type AAC files.
  This package contains the library.
http://www.audiocoding.com/faad2.html
Ted Hess <thess@kitschensync.net>
@@
Config:
	source "feeds/packages/libs/faad2/Config.in"
@@


Source-Makefile: feeds/packages/libs/libtorrent/Makefile
Package: libtorrent
Version: 0.13.4-git-51cd5ea8913a5f5062813d9f5b6256c76d41ea11-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +libsigcxx
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Rakshasa's BitTorrent library
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: libtorrent-0.13.4-git-51cd5ea8913a5f5062813d9f5b6256c76d41ea11.tar.gz
Type: ipkg
Description:  LibTorrent is a BitTorrent library written in C++ for *nix, with a focus on
 high performance and good code. The library differentiates itself from other
 implementations by transfering directly from file pages to the network stack.
 On high-bandwidth connections it is able to seed at 3 times the speed of the
 official client.
http://libtorrent.rakshasa.no/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/libs/argp-standalone/Makefile
Package: argp-standalone
Version: 1.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Hierarchial argument parsing broken out from glibc
Maintainer: 
Source: argp-standalone-1.3.tar.gz
Type: ipkg
Description:   GNU libc hierarchial argument parsing library broken out from glibc.
http://www.lysator.liu.se/~nisse/misc/

@@


Source-Makefile: feeds/packages/libs/libexif/Makefile
Package: libexif
Version: 0.6.21-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: library for jpeg files with exif tags
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: libexif-0.6.21.tar.bz2
Type: ipkg
Description:   libexif is a library for parsing, editing, and saving EXIF data. It is
  intended to replace lots of redundant implementations in command-line
  utilities and programs with GUIs.
http://libexif.sourceforge.net/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/libs/protobuf-c/Makefile
Package: libprotobuf-c
Version: 2014-06-30
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Protocol Buffers library
Maintainer: Jacob Siverskog <jacob@teenageengineering.com>
Source: libprotobuf-c-2014-06-30.tar.bz2
Type: ipkg
Description:   Runtime library to use Google Protocol Buffers from C applications.
  Protocol Buffers are a way of encoding structured data in an efficient yet
  extensible format. Google uses Protocol Buffers for almost all of its
  internal RPC protocols and file formats.
http://code.google.com/p/protobuf-c/
Jacob Siverskog <jacob@teenageengineering.com>
@@


Source-Makefile: feeds/packages/libs/libvorbis/Makefile
Package: libvorbis
Version: 1.3.4-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libogg
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: libvorbis
Maintainer: Ted Hess <thess@kitschensync.net>
Source: libvorbis-1.3.4.tar.xz
Type: ipkg
Description: Vorbis is a general purpose audio and music encoding format
contemporary to MPEG-4's AAC and TwinVQ, the next generation beyond
MPEG audio layer 3. Unlike the MPEG sponsored formats (and other
proprietary formats such as RealAudio G2 and Windows' flavor of the
month), the Vorbis CODEC specification belongs to the public domain.
All the technical details are published and documented, and any
software entity may make full use of the format without license
fee, royalty or patent concerns.
http://xiph.org/vorbis/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/db47/Makefile
Package: libdb47
Version: 4.7.25.NC-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libxml2
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Berkeley DB library (4.7)
Maintainer: Marcel Denia <naoir@gmx.net>
Source: db-4.7.25.NC.tar.gz
Type: ipkg
Description:   Berkeley DB library (4.7).
http://www.sleepycat.com/products/db.shtml
Marcel Denia <naoir@gmx.net>
@@

Package: libdb47xx
Version: 4.7.25.NC-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libdb47 +USE_UCLIBCXX:uclibcxx +USE_LIBSTDCXX:libstdcpp
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Berkeley DB library (4.7) for C++
Maintainer: Marcel Denia <naoir@gmx.net>
Source: db-4.7.25.NC.tar.gz
Type: ipkg
Description:   Berkeley DB library (4.7).  C++ wrapper.
http://www.sleepycat.com/products/db.shtml
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/libs/libgcrypt/Makefile
Package: libgcrypt
Version: 1.6.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libgpg-error
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: GNU crypto library
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: libgcrypt-1.6.1.tar.bz2
Type: ipkg
Description:  This is a general purpose cryptographic library based on the code from
 GnuPG. It provides functions for all cryptograhic building blocks:
 symmetric ciphers (AES, DES, Arcfour, CAST5), hash algorithms (MD5, SHA-1,
 RIPE-MD160, SHA-224/256, SHA-384/512), MACs (HMAC for all hash
 algorithms), public key algorithms (RSA, DSA), large integer functions,
 random numbers and a lot of supporting functions. Some algorithms have
 been disabled to reduce size (Blowfish, Twofish, Serpent,
 RC2, SEED, Camellia, CRC, MD4, TIGER-192, Whirlpool, ElGamal, ECC).
http://directory.fsf.org/security/libgcrypt.html
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/libs/libmad/Makefile
Package: libmad
Version: 0.15.1b-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread @BUILD_PATENTED
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: An high-quality MPEG audio decoding library
Maintainer: Ted Hess <thess@kitschensync.net>
Source: libmad-0.15.1b.tar.gz
Type: ipkg
Description: 	MAD is a high-quality MPEG audio decoder. It currently supports
	MPEG-1 and the MPEG-2 extension to lower sampling frequencies,
	as well as the de facto MPEG 2.5 format. All three audio layers -
	Layer I, Layer II, and Layer III (i.e. MP3) - are fully implemented.
http://www.underbit.com/products/mad/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/libevent/Makefile
Package: libevent
Version: 1.4.15-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librt
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Event notification library (legacy)
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: release-1.4.15-stable.tar.gz
Type: ipkg
Description: 	The libevent API provides a mechanism to execute a callback function
	when a specific event occurs on a file descriptor or after a timeout
	has been reached. Furthermore, libevent also support callbacks due
	to signals or regular timeouts.

	libevent is meant to replace the event loop found in event driven
	network servers. An application just needs to call event_dispatch()
	and then add or remove events dynamically without having to change
	the event loop.
http://www.libevent.org
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/libs/gnutls/Makefile
Package: certtool
Submenu: SSL
Version: 3.3.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libgnutls
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: GNU TLS (certool utility)
Maintainer: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Source: gnutls-3.3.16.tar.xz
Type: ipkg
Description:  GnuTLS is a secure communications library implementing the SSL, TLS
 and DTLS protocols and technologies around them. It provides a simple
 C language application programming interface (API) to access the secure
 communications protocols as well as APIs to parse and write X.509, PKCS12,
 OpenPGP and other required structures. It is aimed to be portable and
 efficient with focus on security and interoperability.
 This package contains the GnuTLS certtool utility.
http://www.gnutls.org/
Nikos Mavrogiannopoulos <nmav@gnutls.org>
@@

Package: gnutls-utils
Submenu: SSL
Version: 3.3.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libgnutls
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: GNU TLS (utilities)
Maintainer: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Source: gnutls-3.3.16.tar.xz
Type: ipkg
Description:  GnuTLS is a secure communications library implementing the SSL, TLS
 and DTLS protocols and technologies around them. It provides a simple
 C language application programming interface (API) to access the secure
 communications protocols as well as APIs to parse and write X.509, PKCS12,
 OpenPGP and other required structures. It is aimed to be portable and
 efficient with focus on security and interoperability.
 This package contains the GnuTLS gnutls-cli, gnutls-serv, psktool,
 and srptool utilities.
http://www.gnutls.org/
Nikos Mavrogiannopoulos <nmav@gnutls.org>
@@

Package: libgnutls
Submenu: SSL
Version: 3.3.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libnettle +!LIBNETTLE_MINI:libgmp +GNUTLS_EXT_LIBTASN1:libtasn1 +GNUTLS_PKCS11:p11-kit
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: GNU TLS (library)
Maintainer: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Source: gnutls-3.3.16.tar.xz
Type: ipkg
Description:  GnuTLS is a secure communications library implementing the SSL, TLS
 and DTLS protocols and technologies around them. It provides a simple
 C language application programming interface (API) to access the secure
 communications protocols as well as APIs to parse and write X.509, PKCS12,
 OpenPGP and other required structures. It is aimed to be portable and
 efficient with focus on security and interoperability.
 This package contains the GnuTLS shared library, needed by other programs.
http://www.gnutls.org/
Nikos Mavrogiannopoulos <nmav@gnutls.org>
@@
Config:
	source "feeds/packages/libs/gnutls/Config.in"
@@

Package: libgnutls-openssl
Submenu: SSL
Version: 3.3.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libgnutls
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: GNU TLS (OpenSSL compat library)
Maintainer: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Source: gnutls-3.3.16.tar.xz
Type: ipkg
Description:  GnuTLS is a secure communications library implementing the SSL, TLS
 and DTLS protocols and technologies around them. It provides a simple
 C language application programming interface (API) to access the secure
 communications protocols as well as APIs to parse and write X.509, PKCS12,
 OpenPGP and other required structures. It is aimed to be portable and
 efficient with focus on security and interoperability.
 This package contains the GnuTLS OpenSSL compatibility layer shared library.
http://www.gnutls.org/
Nikos Mavrogiannopoulos <nmav@gnutls.org>
@@


Source-Makefile: feeds/packages/libs/libgd/Makefile
Package: libgd
Version: 2.1.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libjpeg +libpng
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: The GD graphics library
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: libgd-2.1.0.tar.xz
Type: ipkg
Description:   GD is an open source code library for the dynamic creation of images by
  programmers. GD creates PNG, JPEG and GIF images, among other formats.
http://www.libgd.org/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/libs/libxml2/Makefile
Package: libxml2
Version: 2.9.2-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +zlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Gnome XML library
Maintainer: Michael Heimpold <mhei@heimpold.de>
Source: libxml2-2.9.2.tar.gz
Type: ipkg
Description:   A library for manipulating XML and HTML resources.
http://xmlsoft.org/
Michael Heimpold <mhei@heimpold.de>
@@


Source-Makefile: feeds/packages/libs/libv4l/Makefile
Package: libv4l
Version: 1.2.1-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +librt +BUILD_NLS:libiconv-full
Menu-Depends: 
Provides: 
Build-Depends: argp-standalone !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: libs
Category: Libraries
Title: Video 4 Linux wrapper libraries
Maintainer: Ted Hess <thess@kitschensync.net>
Source: v4l-utils-1.2.1.tar.bz2
Type: ipkg
Description:     libv4l is a collection of libraries which adds a thin abstraction layer on
  top of video4linux2 devices. The purpose of this (thin) layer is to make it
  easy for application writers to support a wide variety of devices without
  having to write separate code for different devices in the same class. libv4l
  consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.

  libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
  of the drivers for those devices supporting v4l1 compatibility (which many
  v4l2 drivers do not).

  libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
  application transparent libv4lconvert conversion where necessary.
http://www.linuxtv.org/
Ted Hess <thess@kitschensync.net>
@@

Package: v4l-utils
Version: 1.2.1-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libv4l +USE_UCLIBCXX:uclibcxx +USE_LIBSTDCXX:libstdcpp +BUILD_NLS:libiconv-full
Menu-Depends: 
Provides: 
Build-Depends: argp-standalone !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: utils
Category: Utilities
Title: Video 4 Linux utilities
Maintainer: Ted Hess <thess@kitschensync.net>
Source: v4l-utils-1.2.1.tar.bz2
Type: ipkg
Description:     libv4l is a collection of libraries which adds a thin abstraction layer on
  top of video4linux2 devices. The purpose of this (thin) layer is to make it
  easy for application writers to support a wide variety of devices without
  having to write separate code for different devices in the same class. libv4l
  consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.

  libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
  of the drivers for those devices supporting v4l1 compatibility (which many
  v4l2 drivers do not).

  libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
  application transparent libv4lconvert conversion where necessary.
  This package contains the video4linux utilities.
http://www.linuxtv.org/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/unixodbc/Makefile
Package: unixodbc
Submenu: database
Version: 2.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libltdl +libpthread
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: unixODBC (libraries)
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: unixODBC-2.3.2.tar.gz
Type: ipkg
Description:   unixODBC is an Open Source ODBC sub-system and an ODBC SDK for Linux,
  Mac OSX, and UNIX.
http://www.unixodbc.org/
Thomas Heil <heil@terminal-consulting.de>
@@

Package: unixodbc-tools
Submenu: database
Version: 2.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +unixodbc +libncurses +libreadline
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: unixODBC Tools
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: unixODBC-2.3.2.tar.gz
Type: ipkg
Description:   Command Line Tools to help install a driver and work with SQL.
http://www.unixodbc.org/
Thomas Heil <heil@terminal-consulting.de>
@@

Package: pgsqlodbc
Submenu: database
Version: 2.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +unixodbc +libpq
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Postgresql driver for ODBC
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: unixODBC-2.3.2.tar.gz
Type: ipkg
Description: 	Postgresql driver for ODBC.
http://www.unixodbc.org/
Thomas Heil <heil@terminal-consulting.de>
@@


Source-Makefile: feeds/packages/libs/libpng/Makefile
Package: libpng
Version: 1.2.56-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib
Menu-Depends: 
Provides: 
Build-Types: host
Section: libs
Category: Libraries
Title: A PNG format files handling library
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: libpng-1.2.56.tar.xz
Type: ipkg
Description: A PNG format files handling library
http://www.libpng.org/pub/png/libpng.html
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/libs/libxslt/Makefile
Package: libxslt
Version: 1.1.28-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libxml2
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Gnome XSLT library
Maintainer: Jiri Slachta <slachta@cesnet.cz>
Source: libxslt-1.1.28.tar.gz
Type: ipkg
Description:  A library for XML transformation using XSLT.
http://xmlsoft.org/XSLT/
Jiri Slachta <slachta@cesnet.cz>
@@

Package: libexslt
Version: 1.1.28-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libxslt
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Gnome XSLT library Extention
Maintainer: Jiri Slachta <slachta@cesnet.cz>
Source: libxslt-1.1.28.tar.gz
Type: ipkg
Description:  A extention for XSLT.
http://xmlsoft.org/XSLT/EXSLT/
Jiri Slachta <slachta@cesnet.cz>
@@

Package: xsltproc
Version: 1.1.28-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libxml2 +libxslt +libexslt
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Gnome XSLT xsltproc Utility
Maintainer: Jiri Slachta <slachta@cesnet.cz>
Source: libxslt-1.1.28.tar.gz
Type: ipkg
Description:  XSLT XML transformation utility.
http://xmlsoft.org/XSLT/
Jiri Slachta <slachta@cesnet.cz>
@@


Source-Makefile: feeds/packages/libs/libidn/Makefile
Package: libidn
Version: 1.28-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Stringprep, Punycode and IDNA implementation
Maintainer: Marcel Denia <naoir@gmx.net>
Source: libidn-1.28.tar.gz
Type: ipkg
Description:   GNU Libidn is a fully documented implementation of the Stringprep,
  Punycode and IDNA specifications. Libidn's purpose is to encode and
  decode internationalized domain names.
http://www.gnu.org/software/libidn/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/libs/libcap/Makefile
Package: libcap
Version: 2.24-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Linux capabilities library
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: libcap-2.24.tar.xz
Type: ipkg
Description: Linux capabilities library
http://www.kernel.org/pub/linux/libs/security/linux-privs/libcap2/
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/libs/libdaemon/Makefile
Package: libdaemon
Version: 0.14-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: A lightweight C library that eases the writing of UNIX daemons
Maintainer: Ted Hess <thess@kitschensync.net>
Source: libdaemon-0.14.tar.gz
Type: ipkg
Description: 	libdaemon is a lightweight C library that eases the writing of UNIX daemons.
	It consists of the following parts:
	- A wrapper around fork() which does the correct daemonization procedure of a process
	- A wrapper around syslog() for simpler and compatible log output to Syslog or STDERR
	- An API for writing PID files
	- An API for serializing UNIX signals into a pipe for usage with select() or poll()
	- An API for running subprocesses with STDOUT and STDERR redirected to syslog

	APIs like these are used in most daemon software available. It is not that
	simple to get it done right and code duplication is not a goal.
http://0pointer.de/lennart/projects/libdaemon/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/libuecc/Makefile
Package: libuecc
Version: 4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Very small Elliptic Curve Cryptography library
Maintainer: Matthias Schiffer <mschiffer@universe-factory.net>
Source: libuecc-4.tar.xz
Type: ipkg
Description: Very small Elliptic Curve Cryptography library
http://git.universe-factory.net/libuecc/
Matthias Schiffer <mschiffer@universe-factory.net>
@@


Source-Makefile: feeds/packages/libs/tcp_wrappers/Makefile
Package: libwrap
Version: 7.6-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Security wrapper library for TCP services
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: tcp_wrappers_7.6.tar.gz
Type: ipkg
Description: Security wrapper library for TCP services
ftp://ftp.porcupine.org/pub/security/index.html
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/libs/fcgi/Makefile
Package: fcgi
Menu: 1
Version: 2.4.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread
Menu-Depends: 
Provides: 
Build-Depends: libtool libintl libiconv
Section: libs
Category: Libraries
Title: Shared library of FastCGI
Maintainer: Jacob Siverskog <jacob@teenageengineering.com>
Source: fcgi-2.4.0.tar.gz
Type: ipkg
Description:  FastCGI is a language independent, scalable, open extension to
 CGI that provides high performance without the limitations of
 server specific APIs.
http://www.fastcgi.com/
Jacob Siverskog <jacob@teenageengineering.com>
@@

Package: fcgixx
Version: 2.4.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread fcgi +USE_UCLIBCXX:uclibcxx +USE_LIBSTDCXX:libstdcpp
Menu-Depends: 
Provides: 
Build-Depends: libtool libintl libiconv
Section: libs
Category: Libraries
Title: Shared library of FastCGI++
Maintainer: Jacob Siverskog <jacob@teenageengineering.com>
Source: fcgi-2.4.0.tar.gz
Type: ipkg
Description: Shared library of FastCGI++
http://www.fastcgi.com/
Jacob Siverskog <jacob@teenageengineering.com>
@@


Source-Makefile: feeds/packages/libs/postgresql/Makefile
Package: libpq
Submenu: database
Version: 9.0.17-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib +libreadline +libpthread +libncurses +shadow-su
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: PostgreSQL client library
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: postgresql-9.0.17.tar.bz2
Type: ipkg
Description: PostgreSQL client library.
http://www.postgresql.org/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: pgsql-cli
Submenu: database
Version: 9.0.17-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpq
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Command Line Interface (CLI) to PostgreSQL databases
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: postgresql-9.0.17.tar.bz2
Type: ipkg
Description: Command Line Interface (CLI) to PostgreSQL databases.
http://www.postgresql.org/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: pgsql-server
Submenu: database
Version: 9.0.17-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpq
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: PostgreSQL databases Server
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: postgresql-9.0.17.tar.bz2
Type: ipkg
Description: PostgreSQL databases Server.
http://www.postgresql.org/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/libs/libowfat/Makefile
Package: libowfat
Version: 0.28-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: reimplemented libdjb under GPL
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: libowfat-0.28.tar.bz2
Type: ipkg
Description: reimplemented libdjb under GPL
http://www.fefe.de/libowfat/
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/libs/libftdi1/Makefile
Package: libftdi1
Version: 1.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libusb-1.0
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Library to talk to FTDI chips
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: libftdi1-1.1.tar.bz2
Type: ipkg
Description:   libFTDI - FTDI USB driver with bitbang mode
  libFTDI is an open source library to talk to FTDI chips: FT232BM, FT245BM, FT2232C, FT2232H, FT4232H, FT2232D and FT245R, including the popular bitbang mode. 
  The library is linked with your program in userspace, no kernel driver required.
http://www.intra2net.com/en/developer/libftdi/
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/libs/glib2/Makefile
Package: glib2
Version: 2.41.1-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +BUILD_NLS:libiconv-full +BUILD_NLS:libintl-full +zlib +libpthread +libffi +libattr
Menu-Depends: 
Provides: 
Build-Depends: glib2/host libpthread zlib libintl libffi !BUILD_NLS:libiconv !BUILD_NLS:libintl
Build-Depends/host: libintl/host libiconv/host libffi/host
Build-Types: host
Section: libs
Category: Libraries
Title: glib 2.0
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: glib-2.41.1.tar.xz
Type: ipkg
Description:   The GLib library of C routines
http://www.gtk.org/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/libs/p11-kit/Makefile
Package: p11-kit
Version: 0.20.7-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libtasn1 +libpthread
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: A library that provides a way to load and enumerate PKCS11 modules.
Maintainer: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
Source: p11-kit-0.20.7.tar.gz
Type: ipkg
Description:   Provides a way to load and enumerate PKCS11 modules. Provides a
  standard configuration setup for installing PKCS11 modules in such a
  way that they are discoverable.
http://p11-glue.freedesktop.org/p11-kit.html
Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
@@


Source-Makefile: feeds/packages/libs/libssh2/Makefile
Package: libssh2
Version: 1.4.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +zlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: SSH2 library
Maintainer: Jiri Slachta <slachta@cesnet.cz>
Source: libssh2-1.4.3.tar.gz
Type: ipkg
Description:  libssh2 is a client-side C library implementing the SSH2 protocol.
http://www.libssh2.org/
Jiri Slachta <slachta@cesnet.cz>
@@


Source-Makefile: feeds/packages/libs/libmodbus/Makefile
Package: libmodbus
Version: 3.0.6-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: libmodbus
Maintainer: Michael Heimpold <mhei@heimpold.de>
Source: libmodbus-3.0.6.tar.gz
Type: ipkg
Description: A Modbus library for Linux, Mac OS X, FreeBSD, QNX and Win32
http://www.libmodbus.org
Michael Heimpold <mhei@heimpold.de>
@@


Source-Makefile: feeds/packages/libs/libp11/Makefile
Package: libp11
Version: 20131021-ab6306ee7ede9b2fb9c1fa2c3694c6e7ff044a9e
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl
Menu-Depends: 
Provides: 
Build-Depends: libtool libintl libiconv
Section: libs
Category: Libraries
Title: PKCS
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: libp11-20131021.tar.gz
Type: ipkg
Description:   Libp11 is a library implementing a small layer on top of PKCS#11 API
  to make using PKCS#11 implementations easier.
https://www.opensc-project.org/opensc/wiki/libp11
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/libs/intltool/Makefile
Package: intltool
Prereq-Check: 1
Version: 0.40.6-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Types: host
Section: libs
Category: Libraries
Title: set of tools to centralize translation using GNU gettext
Maintainer: Ted Hess <thess@kitschensync.net>
Source: intltool-0.40.6.tar.bz2
Type: ipkg
Build-Only: 1
Description:   intltool is a set of tools to centralize translation of many different
  file formats using GNU gettext-compatible PO files.
http://www.freedesktop.org/wiki/Software/intltool
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/avahi/Makefile
Package: libavahi-client
Version: 0.6.31-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libavahi-dbus-support +avahi-daemon
Menu-Depends: 
Provides: 
Build-Depends: libexpat libdaemon libgdbm intltool/host libpthread dbus
Section: libs
Category: Libraries
Title: An mDNS/DNS-SD implementation (libavahi-client library)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: avahi-0.6.31.tar.gz
Type: ipkg
Description:  Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
 implementation (library). It facilitates
 service discovery on a local network -- this means that
 you can plug your laptop or computer into a network and
 instantly be able to view other people who you can chat with,
 find printers to print to or find files being shared.
 This kind of technology is already found in MacOS X
 (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
 and is very convenient.
 .
 This packages adds the libavahi-client library.
 It also automatically adds the required
 libavahi-dbus-support and the avahi-daemon packages.
 For more information please see the avahi documentation.
http://www.avahi.org/
Ted Hess <thess@kitschensync.net>
@@

Package: avahi-utils
Submenu: IP Addresses and Names
Version: 0.6.31-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libavahi-client +libgdbm
Menu-Depends: 
Provides: 
Build-Depends: libexpat libdaemon libgdbm intltool/host libpthread dbus
Section: net
Category: Network
Title: An mDNS/DNS-SD implementation (utilities)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: avahi-0.6.31.tar.gz
Type: ipkg
Description:  Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
 implementation (library). It facilitates
 service discovery on a local network -- this means that
 you can plug your laptop or computer into a network and
 instantly be able to view other people who you can chat with,
 find printers to print to or find files being shared.
 This kind of technology is already found in MacOS X
 (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
 and is very convenient.
 .
 This packages installs the following avahi utility programs:
 avahi-browse, avahi-publish, avahi-resolve, avahi-set-host-name.
 It also automatically adds the required libavahi-client package.
 For more information please see the avahi documentation.
http://www.avahi.org/
Ted Hess <thess@kitschensync.net>
@@

Package: libavahi-dbus-support
Version: 0.6.31-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +dbus +libavahi
Menu-Depends: 
Provides: 
Build-Variant: dbus
Build-Depends: libexpat libdaemon libgdbm intltool/host libpthread dbus
Section: libs
Category: Libraries
Title: An mDNS/DNS-SD implementation (D-Bus support)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: avahi-0.6.31.tar.gz
Type: ipkg
Description:  Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
 implementation (library). It facilitates
 service discovery on a local network -- this means that
 you can plug your laptop or computer into a network and
 instantly be able to view other people who you can chat with,
 find printers to print to or find files being shared.
 This kind of technology is already found in MacOS X
 (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
 and is very convenient.
 .
 The libavahi package contains the mDNS/DNS-SD shared libraries,
 used by other programs. Specifically, it provides
 libavahi-core and libavahi-common libraries.
 By default, it is built without D-Bus support,
 i.e. the --disable-dbus configuration flag is set.
 To enable D-Bus support, select the package
 libavahi-dbus-support.
 .
 The libavahi-dbus-support package enables
 D-Bus support in avahi, needed to support
 the libavahi-client library and avahi-utils.
 Selecting this package modifies the build configuration
 so that avahi packages are built with support for D-BUS enabled;
 it does not generate a separate binary of its own.
 It also automatically adds the D-Bus package to the build.
 libavahi-dbus-support is selected automatically if you select
 libavahi-client or avahi-utils.
http://www.avahi.org/
Ted Hess <thess@kitschensync.net>
@@

Package: libavahi
Version: 0.6.31-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +SSP_SUPPORT:libssp
Menu-Depends: 
Provides: 
Build-Depends: libexpat libdaemon libgdbm intltool/host libpthread dbus
Section: libs
Category: Libraries
Title: An mDNS/DNS-SD implementation (library)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: avahi-0.6.31.tar.gz
Type: ipkg
Description:  Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
 implementation (library). It facilitates
 service discovery on a local network -- this means that
 you can plug your laptop or computer into a network and
 instantly be able to view other people who you can chat with,
 find printers to print to or find files being shared.
 This kind of technology is already found in MacOS X
 (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
 and is very convenient.
 .
 The libavahi package contains the mDNS/DNS-SD shared libraries,
 used by other programs. Specifically, it provides
 libavahi-core and libavahi-common libraries.
 By default, it is built without D-Bus support,
 i.e. the --disable-dbus configuration flag is set.
 To enable D-Bus support, select the package
 libavahi-dbus-support.
http://www.avahi.org/
Ted Hess <thess@kitschensync.net>
@@

Package: avahi-autoipd
Submenu: IP Addresses and Names
Version: 0.6.31-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libdaemon
Menu-Depends: 
Provides: 
Build-Depends: libexpat libdaemon libgdbm intltool/host libpthread dbus
Section: net
Category: Network
Title: IPv4LL network address configuration daemon
Maintainer: Ted Hess <thess@kitschensync.net>
Source: avahi-0.6.31.tar.gz
Type: ipkg
Description:  Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
 implementation (library). It facilitates
 service discovery on a local network -- this means that
 you can plug your laptop or computer into a network and
 instantly be able to view other people who you can chat with,
 find printers to print to or find files being shared.
 This kind of technology is already found in MacOS X
 (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
 and is very convenient.
 .
 This package implements IPv4LL, "Dynamic Configuration of IPv4 Link-Local
 Addresses" (IETF RFC3927), a protocol for automatic IP address configuration
 from the link-local 169.254.0.0/16 range without the need for a central
 server. It is primarily intended to be used in ad-hoc networks which lack a
 DHCP server.
http://www.avahi.org/
Ted Hess <thess@kitschensync.net>
@@

Package: avahi-daemon
Submenu: IP Addresses and Names
Version: 0.6.31-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libavahi +libexpat +librt +libdaemon
Menu-Depends: 
Provides: 
Build-Depends: libexpat libdaemon libgdbm intltool/host libpthread dbus
Section: net
Category: Network
Title: An mDNS/DNS-SD implementation (daemon)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: avahi-0.6.31.tar.gz
Type: ipkg
Description:  Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
 implementation (library). It facilitates
 service discovery on a local network -- this means that
 you can plug your laptop or computer into a network and
 instantly be able to view other people who you can chat with,
 find printers to print to or find files being shared.
 This kind of technology is already found in MacOS X
 (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
 and is very convenient.
 .
 This package contains an mDNS/DNS-SD daemon.
http://www.avahi.org/
Ted Hess <thess@kitschensync.net>
@@

Package: avahi-dnsconfd
Submenu: IP Addresses and Names
Version: 0.6.31-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libavahi +libdaemon
Menu-Depends: 
Provides: 
Build-Depends: libexpat libdaemon libgdbm intltool/host libpthread dbus
Section: net
Category: Network
Title: A Unicast DNS server from mDNS/DNS-SD configuration daemon
Maintainer: Ted Hess <thess@kitschensync.net>
Source: avahi-0.6.31.tar.gz
Type: ipkg
Description:  Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
 implementation (library). It facilitates
 service discovery on a local network -- this means that
 you can plug your laptop or computer into a network and
 instantly be able to view other people who you can chat with,
 find printers to print to or find files being shared.
 This kind of technology is already found in MacOS X
 (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
 and is very convenient.
 .
 This package contains a Unicast DNS server from mDNS/DNS-SD configuration
 daemon, which may be used to configure conventional DNS servers using mDNS
 in a DHCP-like fashion. Especially useful on IPv6.
http://www.avahi.org/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/expat/Makefile
Package: libexpat
Version: 2.1.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Types: host
Section: libs
Category: Libraries
Title: An XML parsing library
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: expat-2.1.0.tar.gz
Type: ipkg
Description:  A fast, non-validating, stream-oriented XML parsing library.
http://expat.sourceforge.net/
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/libs/liboping/Makefile
Package: liboping
Version: 1.6.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: C library to generate ICMP echo requests.
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: liboping-1.6.2.tar.bz2
Type: ipkg
Description: C library to generate ICMP echo requests.
http://verplant.org/liboping/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: oping
Version: 1.6.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +liboping
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Send ICMP echo request to network hosts
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: liboping-1.6.2.tar.bz2
Type: ipkg
Description: Send ICMP echo request to network hosts
http://verplant.org/liboping/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: noping
Version: 1.6.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +liboping +libncurses
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Ncurses application to send ICMP echo request to network hosts
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: liboping-1.6.2.tar.bz2
Type: ipkg
Description: Ncurses application to send ICMP echo request to network hosts
http://verplant.org/liboping/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/libs/libsndfile/Makefile
Package: libsndfile
Version: 1.0.25-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread @!avr32
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Library for reading/writing audio files
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: libsndfile-1.0.25.tar.gz
Type: ipkg
Description:  libsndfile is a library of C routines for reading and writing files
 containing sampled audio data.
http://www.mega-nerd.com/libsndfile/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/libs/apr-util/Makefile
Package: libaprutil
Version: 1.5.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libapr +libexpat +libsqlite3 +libuuid +BUILD_NLS:libiconv-full
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: libs
Category: Libraries
Title: Apache Portable Runtime Utility Library
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: apr-util-1.5.3.tar.bz2
Type: ipkg
Description: Apache Portable Runtime Utility Library
http://apr.apache.org/
Thomas Heil <heil@terminal-consulting.de>
@@


Source-Makefile: feeds/packages/libs/libsigc++/Makefile
Package: libsigcxx
Version: 2.3.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libstdcpp
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: typesafe callback system for standard C++
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: libsigc++-2.3.1.tar.xz
Type: ipkg
Description:  It allows you to define signals and to connect those signals to any
 callback function, either global or a member function, regardless of
 whether it is static or virtual.
http://libsigc.sourceforge.net/
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/libs/libupnp/Makefile
Package: libupnp
Menu: 1
Version: 1.6.19-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: UPnP SDK library
Maintainer: Ted Hess <thess@kitschensync.net>
Source: libupnp-1.6.19.tar.bz2
Type: ipkg
Description: The portable SDK for UPnP Devices (libupnp) provides developers with an API and
open source code for building control points, devices, and bridges that are
compliant with Version 1.0 of the  Universal Plug and Play Device Architecture
Specification.
http://pupnp.sourceforge.net/
Ted Hess <thess@kitschensync.net>
@@

Package: libupnp-sample
Version: 1.6.19-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libupnp
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: UPnP sample applications
Maintainer: Ted Hess <thess@kitschensync.net>
Source: libupnp-1.6.19.tar.bz2
Type: ipkg
Description: TVcontrolpoint & tvdevice sample applications run inside /etc/upnp-tvdevice/
http://pupnp.sourceforge.net/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/gdbm/Makefile
Package: libgdbm
Version: 1.11-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: GNU database manager
Maintainer: Marcel Denia <naoir@gmx.net>
Source: gdbm-1.11.tar.gz
Type: ipkg
Description:   GNU database manager library
  GNU dbm is a set of database routines that use extendible hashing and
  works similar to the standard UNIX dbm routines.
http://www.gnu.org/software/gdbm/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/libs/libmms/Makefile
Package: libmms
Version: 0.6.4-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +BUILD_NLS:libiconv-full
Menu-Depends: 
Provides: 
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: libs
Category: Libraries
Title: MMS stream protocol library
Maintainer: Ted Hess <thess@kitschensync.net>
Source: libmms-0.6.4.tar.gz
Type: ipkg
Description: 	LibMMS is a common library for parsing mms:// and mmsh:// type network streams.
	These are commonly used to stream Windows Media Video content over the web.
	LibMMS itself is only for receiving MMS stream,
	it doesn't handle sending at all.
http://libmms.sourceforge.net
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/libaio/Makefile
Package: libaio
Version: 0.3.109-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Linux kernel AIO interface access library
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: libaio_0.3.109.orig.tar.gz
Type: ipkg
Description: Linux kernel AIO interface access library
http://lse.sourceforge.net/io/aio.html
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/libs/c-ares/Makefile
Package: libcares
Version: 1.10.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Library for asyncronous DNS Requests (including name resolves)
Maintainer: Karl Palsson <karlp@remake.is>
Source: c-ares-1.10.0.tar.gz
Type: ipkg
Description:   c-ares is a C library for asynchronous DNS requests (including name resolves)

C89 compatibility, MIT licensed, builds for and runs on POSIX, Windows,
Netware, Android and many more operating systems.

http://c-ares.haxx.se/
Karl Palsson <karlp@remake.is>
@@


Source-Makefile: feeds/packages/libs/liboil/Makefile
Package: liboil
Version: 0.3.17-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librt
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: simple functions optimized for various CPUs
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: liboil-0.3.17.tar.gz
Type: ipkg
Description:   Liboil is a library of simple functions that are optimized for various CPUs.
  These functions are generally loops implementing simple algorithms, such as
  converting an array of N integers to floating-point numbers or multiplying
  and summing an array of N numbers. Such functions are candidates for significant
  optimization using various techniques, especially by using extended instructions
  provided by modern CPUs (Altivec, MMX, SSE, etc.).
http://liboil.freedesktop.org/wiki/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/libs/libtheora/Makefile
Package: libtheora
Version: 1.1.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libogg
Menu-Depends: 
Provides: 
Build-Depends: libvorbis
Section: libs
Category: Libraries
Title: libtheora
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: libtheora-1.1.1.tar.bz2
Type: ipkg
Description: Theora is Xiph.Org's first publicly released video codec, intended
for use within the Foundation's Ogg multimedia streaming system.
Theora is derived directly from On2's VP3 codec; Currently the
encoders are nearly identical, but Theora will make use of new
features supported by the decoder to improve over what is
is possible with VP3.
http://xiph.org/theora/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/libs/nacl/Makefile
Package: nacl
Version: 20110221-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: NaCl Networking and Cryptography library
Maintainer: Matthias Schiffer <mschiffer@universe-factory.net>
Source: nacl-20110221.tar.bz2
Type: ipkg
Description: NaCl Networking and Cryptography library
http://nacl.cace-project.eu/
Matthias Schiffer <mschiffer@universe-factory.net>
@@


Source-Makefile: feeds/packages/libs/alsa-lib/Makefile
Package: alsa-lib
Version: 1.0.27.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread @AUDIO_SUPPORT +kmod-sound-core +libpthread +librt
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: ALSA (Advanced Linux Sound Architecture) library
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: alsa-lib-1.0.27.2.tar.bz2
Type: ipkg
Description:  This is the library package for alsa, needed by some userspace programs.
 You must have enabled the ALSA support in the kernel.
http://www.alsa-project.org/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/libs/speex/Makefile
Package: libspeex
Version: 1.2rc1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Open source speech compression codec library
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: speex-1.2rc1.tar.gz
Type: ipkg
Description: 	Open source patent-free speech compression codec library.
	Speex is an Open Source/Free Software patent-free audio compression
	format designed for speech. The Speex Project aims to lower the
	barrier of entry for voice applications by providing a free
	alternative to expensive proprietary speech codecs. Moreover, Speex
	is well-adapted to Internet applications and provides useful features
	that are not present in most other codecs.

	This package contains the shared codec library, needed by other programs.
http://www.speex.org/
Peter Wagner <tripolar@gmx.at>
@@

Package: libspeexdsp
Version: 1.2rc1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Open source speech compression codec library output to DSP
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: speex-1.2rc1.tar.gz
Type: ipkg
Description: 	Open source patent-free speech compression codec library.
	Speex is an Open Source/Free Software patent-free audio compression
	format designed for speech. The Speex Project aims to lower the
	barrier of entry for voice applications by providing a free
	alternative to expensive proprietary speech codecs. Moreover, Speex
	is well-adapted to Internet applications and provides useful features
	that are not present in most other codecs.

	This package contains the shared dsp library, needed by other programs.
http://www.speex.org/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/libs/libvorbisidec/Makefile
Package: libvorbisidec
Version: 1.0.2+svn18153-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libogg
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: A fixed-point Ogg/Vorbis decoder library
Maintainer: Ted Hess <thess@kitschensync.net>
Source: libvorbisidec_1.0.2+svn18153.orig.tar.gz
Type: ipkg
Description: 	libvorbisidec is "tremor", a fixed-point implementation of libvorbis.
	It also has libogg built-in. It is suitable as a replacement for
	libvorbis and libogg in tremor-aware applications.
	Tremor is a decoder only.
http://wiki.xiph.org/index.php/Tremor
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/libs/liburcu/Makefile
Package: liburcu
Version: 0.7.12-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: User-space Read-Copy-Update library
Maintainer: daniel.salzman@nic.cz
Source: userspace-rcu-0.7.12.tar.bz2
Type: ipkg
Description: 	Userspace Read-Copy-Update library.
https://lttng.org/
daniel.salzman@nic.cz
@@


Source-Makefile: feeds/packages/libs/libffi/Makefile
Package: libffi
Version: 3.0.13-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Types: host
Section: libs
Category: Libraries
Title: Foreign Function Interface (FFI) library
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: libffi-3.0.13.tar.gz
Type: ipkg
Description: The libffi library provides a portable, high level programming interface to
various calling conventions. This allows a programmer to call any function
specified by a call interface description at run-time.

FFI stands for Foreign Function Interface. A foreign function interface is the
popular name for the interface that allows code written in one language to call
code written in another language. The libffi library really only provides the
lowest, machine dependent layer of a fully featured foreign function interface.
A layer must exist above libffi that handles type conversions for values passed
between the two languages.
http://sourceware.org/libffi/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/devel/patch/Makefile
Package: patch
Version: 2.7.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: devel
Category: Development
Title: patch
Maintainer: Russell Senior <russell@personaltelco.net>
Source: patch-2.7.1.tar.gz
Type: ipkg
Description:   The Patch package contains a program for modifying or creating files
  by applying a "patch" file typically created by the diff program.
http://www.gnu.org/
Russell Senior <russell@personaltelco.net>
@@


Source-Makefile: feeds/packages/sound/pulseaudio/Makefile
Package: pulseaudio-daemon
Version: 5.0-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libspeexdsp +libsndfile +libltdl +libpthread +librt +alsa-lib +libjson +libopenssl +libwrap +libcap +BUILD_NLS:libiconv-full +BUILD_NLS:libintl-full
Menu-Depends: 
Provides: pulseaudio
Build-Depends: intltool/host !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: sound
Category: Sound
Title: Network sound server
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: pulseaudio-5.0.tar.xz
Type: ipkg
Description:     PulseAudio (formerly Polypaudio) is a cross-platform, networked sound server.
http://www.pulseaudio.org
Peter Wagner <tripolar@gmx.at>
@@

Package: pulseaudio-tools
Version: 5.0-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libsndfile pulseaudio
Menu-Depends: 
Provides: 
Build-Depends: intltool/host !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: sound
Category: Sound
Title: Tools for Pulseaudio
Maintainer: 
Source: pulseaudio-5.0.tar.xz
Type: ipkg
Description: Tools for Pulseaudio
http://www.pulseaudio.org

@@

Package: pulseaudio-profiles
Version: 5.0-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread pulseaudio
Menu-Depends: 
Provides: 
Build-Depends: intltool/host !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: sound
Category: Sound
Title: Profiles for Pulseaudio
Maintainer: 
Source: pulseaudio-5.0.tar.xz
Type: ipkg
Description: Profiles for Pulseaudio
http://www.pulseaudio.org

@@


Source-Makefile: feeds/packages/sound/mpd/Makefile
Package: mpd-full
Version: 0.17.6-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +glib2 +libcurl +libpthread +BUILD_NLS:libiconv-full +libflac +BUILD_PATENTED:libmad +libvorbisidec +AUDIO_SUPPORT:alsa-lib +libaudiofile +BUILD_PATENTED:libfaad2 +libffmpeg +libid3tag +libmms +libogg +libsndfile +libvorbis
Menu-Depends: 
Provides: mpd
Build-Variant: full
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: sound
Category: Sound
Title: Music Player Daemon (full)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: mpd-0.17.6.tar.bz2
Type: ipkg
Description:  Music Player Daemon (MPD) is a flexible, powerful, server-side
 application for playing music. It is typically controlled over a
 network using one of it's many clients including mpc (console),
 gmpc (gnome), phpmp (php), etc...
 .
 This package contains a full-blown Music Player Daemon.
http://www.musicpd.org/
Ted Hess <thess@kitschensync.net>
@@

Package: mpd-mini
Version: 0.17.6-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +glib2 +libcurl +libpthread +BUILD_NLS:libiconv-full +libflac +BUILD_PATENTED:libmad +libvorbisidec
Menu-Depends: 
Provides: mpd
Build-Variant: mini
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: sound
Category: Sound
Title: Music Player Daemon (mini)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: mpd-0.17.6.tar.bz2
Type: ipkg
Description:  Music Player Daemon (MPD) is a flexible, powerful, server-side
 application for playing music. It is typically controlled over a
 network using one of it's many clients including mpc (console),
 gmpc (gnome), phpmp (php), etc...
 .
 This package contains a minimal Music Player Daemon, with support for
 only Flac, MP3 & OGG media types & only file: & http: protocols.
http://www.musicpd.org/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/sound/mpc/Makefile
Package: mpc
Version: 0.26-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libmpdclient
Menu-Depends: 
Provides: 
Section: sound
Category: Sound
Title: Music Player Daemon Console Client
Maintainer: Ted Hess <thess@kitschensync.net>
Source: mpc-0.26.tar.xz
Type: ipkg
Description: 	MPD is a music player supporting flac, mp3 and ogg files.
	It is typically controlled over a network using one of it's many
	clients including mpc(console), gmpc(gnome), phpmp(php) etc.
	this is MPC
http://www.musicpd.org/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/utils/ncdu/Makefile
Package: ncdu
Submenu: Filesystem
Version: 1.10-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncursesw
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: ncurses disk usage viewer
Maintainer: Charles Lehner <celehner1@gmail.com>
Source: ncdu-1.10.tar.gz
Type: ipkg
Description:   Ncdu is a ncurses-based du viewer. It provides a fast and easy-to-use
  interface through famous du utility. It allows one to browse through the
  directories and show percentages of disk usage with ncurses library.
http://dev.yorhel.nl/ncdu
Charles Lehner <celehner1@gmail.com>
@@


Source-Makefile: feeds/packages/utils/grep/Makefile
Package: grep
Version: 2.21-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpcre
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: grep search utility - full version
Maintainer: Julen Landa Alustiza <julen@zokormazo.info>
Source: grep-2.21.tar.xz
Type: ipkg
Description: The grep command searches one or more input files for lines
containing a match to a specified pattern. By default, grep
prints the matching lines.
http://www.gnu.org/software/grep/
Julen Landa Alustiza <julen@zokormazo.info>
@@


Source-Makefile: feeds/packages/utils/haveged/Makefile
Package: haveged
Version: 1.9.1-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libhavege
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Feeds the kernel entropy pool by timing CPU loops.
Maintainer: Hannu Nyman <hannu.nyman@iki.fi>
Source: haveged-1.9.1.tar.gz
Type: ipkg
Description: Feeds the kernel entropy pool by timing CPU loops.
http://www.issihosts.com/haveged/
Hannu Nyman <hannu.nyman@iki.fi>
@@

Package: libhavege
Version: 1.9.1-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Library for haveged
Maintainer: Hannu Nyman <hannu.nyman@iki.fi>
Source: haveged-1.9.1.tar.gz
Type: ipkg
Description: Library for haveged
http://www.issihosts.com/haveged/
Hannu Nyman <hannu.nyman@iki.fi>
@@


Source-Makefile: feeds/packages/utils/opensc/Makefile
Package: libopensc
Menu: 1
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +libpthread
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: libs
Category: Libraries
Title: OpenSC libraries for smart cards
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description:   OpenSC provides a set of libraries and utilities to work with smart cards.
  Its main focus is on cards that support cryptographic operations, and
  facilitate their use in security applications such as authentication,
  mail encryption and digital signatures.
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-pkcs11
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: libs
Category: Libraries
Title: OpenSC - PKCS11 provider
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description:   OpenSC PKCS#11 provider
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libpkcs11-spy
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +libpthread
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: libs
Category: Libraries
Title: PKCS11 spying wrapper
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: PKCS11 spying wrapper
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils
Menu: 1
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: OpenSC - tools for smart cards
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description:   OpenSC utilities
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-cardos-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: cardos-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: cardos-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-cryptoflex-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: cryptoflex-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: cryptoflex-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-dnie-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: dnie-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: dnie-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-eidenv
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: eidenv utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: eidenv utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-iasecc-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: iasecc-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: iasecc-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-netkey-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: netkey-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: netkey-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-openpgp-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: openpgp-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: openpgp-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-opensc-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: opensc-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: opensc-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-opensc-explorer
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils +libncurses +libreadline
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: opensc-explorer utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: opensc-explorer utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-piv-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: piv-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: piv-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-pkcs11-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: pkcs11-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: pkcs11-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-pkcs15-crypt
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: pkcs15-crypt utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: pkcs15-crypt utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-pkcs15-init
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: pkcs15-init utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: pkcs15-init utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-pkcs15-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: pkcs15-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: pkcs15-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-sc-hsm-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: sc-hsm-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: sc-hsm-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: opensc-utils-westcos-tool
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread opensc-utils
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: utils
Category: Utilities
Title: westcos-tool utility from opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: westcos-tool utility from opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-asepcos
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: asepcos card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: asepcos card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-authentic
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: authentic card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: authentic card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-cardos
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: cardos card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: cardos card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-cyberflex
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: cyberflex card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: cyberflex card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-entersafe
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: entersafe card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: entersafe card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-epass2003
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: epass2003 card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: epass2003 card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-flex
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: flex card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: flex card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-gpk
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: gpk card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: gpk card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-ias-adele-admin1
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: ias_adele_admin1 card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: ias_adele_admin1 card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-ias-adele-admin2
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: ias_adele_admin2 card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: ias_adele_admin2 card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-ias-adele-common
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: ias_adele_common card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: ias_adele_common card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-iasecc-admin-eid
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: iasecc_admin_eid card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: iasecc_admin_eid card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-iasecc-generic-oberthur
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: iasecc_generic_oberthur card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: iasecc_generic_oberthur card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-iasecc-generic-pki
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: iasecc_generic_pki card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: iasecc_generic_pki card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-iasecc
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: iasecc card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: iasecc card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-incrypto34
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: incrypto34 card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: incrypto34 card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-jcop
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: jcop card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: jcop card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-miocos
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: miocos card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: miocos card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-muscle
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: muscle card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: muscle card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-myeid
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: myeid card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: myeid card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-oberthur
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: oberthur card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: oberthur card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-openpgp
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: openpgp card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: openpgp card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-pkcs15
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: pkcs15 card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: pkcs15 card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-rutoken-ecp
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: rutoken_ecp card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: rutoken_ecp card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-rutoken
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: rutoken card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: rutoken card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-sc-hsm
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: sc-hsm card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: sc-hsm card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-setcos
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: setcos card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: setcos card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-starcos
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: starcos card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: starcos card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@

Package: libopensc-profile-westcos
Version: 20140317-de6d61405b271e22244376e4817e16b49018e1ce
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libopensc
Menu-Depends: 
Provides: 
Build-Depends: +libpcsclite libtool libintl libiconv
Section: lib
Category: Libraries
Title: westcos card profile for opensc
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opensc-20140317.tar.gz
Type: ipkg
Description: westcos card profile for opensc
https://github.com/OpenSC/OpenSC/wiki
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/utils/dbus/Makefile
Package: libdbus
Version: 1.8.8-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librt
Menu-Depends: 
Provides: 
Section: utils
Category: Libraries
Title: Simple interprocess messaging system (library)
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: dbus-1.8.8.tar.gz
Type: ipkg
Description: Simple interprocess messaging system (library)
http://dbus.freedesktop.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: dbus
Version: 1.8.8-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libexpat +libdbus
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Simple interprocess messaging system (daemon)
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: dbus-1.8.8.tar.gz
Type: ipkg
Description: Simple interprocess messaging system (daemon)
http://dbus.freedesktop.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: dbus-utils
Version: 1.8.8-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread dbus
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Simple interprocess messaging system (utilities)
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: dbus-1.8.8.tar.gz
Type: ipkg
Description: Simple interprocess messaging system (utilities)
http://dbus.freedesktop.org/
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/utils/shadow/Makefile
Package: shadow-chage
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-common
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Utility chage from the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:     Full version of standard chage utility. Normally, you would not use this
    package, since the functionality in BusyBox is more than sufficient.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow-groupadd
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-common
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Utility groupadd from the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:     Full version of standard groupadd utility. Normally, you would not use this
    package, since the functionality in BusyBox is more than sufficient.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow-groupdel
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-common
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Utility groupdel from the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:     Full version of standard groupdel utility. Normally, you would not use this
    package, since the functionality in BusyBox is more than sufficient.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow-groupmod
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-common
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Utility groupmod from the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:     Full version of standard groupmod utility. Normally, you would not use this
    package, since the functionality in BusyBox is more than sufficient.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow-groups
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-common
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Utility groups from the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:     Full version of standard groups utility. Normally, you would not use this
    package, since the functionality in BusyBox is more than sufficient.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow-passwd
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-common
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Utility passwd from the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:     Full version of standard passwd utility. Normally, you would not use this
    package, since the functionality in BusyBox is more than sufficient.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow-su
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-common
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Utility su from the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:     Full version of standard su utility. Normally, you would not use this
    package, since the functionality in BusyBox is more than sufficient.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow-useradd
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-common
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Utility useradd from the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:     Full version of standard useradd utility. Normally, you would not use this
    package, since the functionality in BusyBox is more than sufficient.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow-userdel
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-common
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Utility userdel from the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:     Full version of standard userdel utility. Normally, you would not use this
    package, since the functionality in BusyBox is more than sufficient.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow-usermod
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-common
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Utility usermod from the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:     Full version of standard usermod utility. Normally, you would not use this
    package, since the functionality in BusyBox is more than sufficient.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +shadow-chage +shadow-groupadd +shadow-groupdel +shadow-groupmod +shadow-groups +shadow-passwd +shadow-su +shadow-useradd +shadow-userdel +shadow-usermod
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: The PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description:   Full versions of standard shadow utilities. Normally, you would not
  use this package, since the functionality in BusyBox is more than
  sufficient and much smaller.
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: shadow-common
Version: 4.1.5.1-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Depends: libintl
Section: utils
Category: Utilities
Title: Shared definitions for the PLD Linux shadow utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: shadow-4.1.5.1.tar.bz2
Type: ipkg
Description: Shared definitions for the PLD Linux shadow utilities
http://pkg-shadow.alioth.debian.org/
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/utils/unrar/Makefile
Package: unrar
Submenu: Compression
Version: 5.1.6-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +USE_UCLIBCXX:uclibcxx +USE_LIBSTDCXX:libstdcpp +libpthread
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: UnRAR application
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: unrarsrc-5.1.6.tar.gz
Type: ipkg
Description:    UnRAR is an application that can decompress files and archives created using
   the RAR compression scheme
http://www.rarlab.com/
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/utils/unzip/Makefile
Package: unzip
Submenu: Compression
Version: 6.0-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: De-archiver for .zip files
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: unzip60.tar.gz
Type: ipkg
Description: 	InfoZIP's unzip program. With the exception of multi-volume archives
	(ie, .ZIP files that are split across several disks using PKZIP's /& option),
	this can handle any file produced either by PKZIP, or the corresponding
	InfoZIP zip program.
http://infozip.sourceforge.net/UnZip.html
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/utils/lm-sensors/Makefile
Package: lm-sensors
Version: 3.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +sysfsutils +libsensors
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: lm-sensors
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: lm_sensors-3.3.5.tar.bz2
Type: ipkg
Description:  utility to read hardware sensor data
http://www.lm-sensors.org/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: lm-sensors-detect
Version: 3.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +sysfsutils +lm-sensors +perl +perlbase-essential +perlbase-fcntl +perlbase-file +perlbase-xsloader
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: lm-sensors-detect
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: lm_sensors-3.3.5.tar.bz2
Type: ipkg
Description:  script to autodetect sensor hardware
http://www.lm-sensors.org/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: libsensors
Version: 3.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +sysfsutils
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: libsensors
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: lm_sensors-3.3.5.tar.bz2
Type: ipkg
Description:  lm-sensors libraries
http://www.lm-sensors.org/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/utils/lsof/Makefile
Package: lsof
Version: 4.86-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librpc
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: LiSt Open Files - a diagnostic tool
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: lsof_4.86+dfsg.orig.tar.gz
Type: ipkg
Description: LiSt Open Files - a diagnostic tool
http://people.freebsd.org/~abe/
Maxim Storchak <m.storchak@gmail.com>
@@


Source-Makefile: feeds/packages/utils/screen/Makefile
Package: screen
Version: 4.2.1-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncurses
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Full-screen terminal window manager
Maintainer: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Source: screen-4.2.1.tar.gz
Type: ipkg
Description: 	Screen is a full-screen window manager that multiplexes a physical
	terminal between several processes, typically interactive shells.
http://www.gnu.org/software/screen/
Etienne CHAMPETIER <champetier.etienne@gmail.com>
@@


Source-Makefile: feeds/packages/utils/triggerhappy/Makefile
Package: triggerhappy
Version: 0.3.4-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: handle input events and run configured programs
Maintainer: Ted Hess <thess@kitschensync.net>
Source: triggerhappy-0.3.4.tar.gz
Type: ipkg
Description: 	triggerhappy - handle input events and run configured programs
	The daemon thd can handle hotplugged input devices and is configured through
	simple configuration files in /etc/triggerhappy/triggers.d/.
http://github.com/wertarbyte/triggerhappy
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/utils/serialconsole/Makefile
Package: serialconsole
Version: 0.95-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Serial Console - minimal terminal program
Maintainer: Stefan Bethke <stb@lassitu.de>
Source: sc-0.95.tar.gz
Type: ipkg
Description: serialconsole (sc) is a minimal terminal program allowing to use one machine
to access the serial console of another machine.
http://sourceforge.net/projects/serialconsole/
Stefan Bethke <stb@lassitu.de>
@@


Source-Makefile: feeds/packages/utils/dmidecode/Makefile
Package: dmidecode
Version: 2.12-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread @(TARGET_x86||TARGET_x86_64)
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Displays BIOS informations.
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: dmidecode-2.12.tar.bz2
Type: ipkg
Description: 	Dmidecode reports information about your system's hardware
	as described in your system BIOS according to the SMBIOS/DMI
	standard.
http://www.nongnu.org/dmidecode/
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/utils/mktorrent/Makefile
Package: mktorrent
Submenu: BitTorrent
Version: 1.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: mktorrent
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: mktorrent-1.0.tar.gz
Type: ipkg
Description: mktorrent
http://mktorrent.sourceforge.net/
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/utils/pciutils/Makefile
Package: pciutils
Version: 3.2.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Linux PCI Utilities
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: pciutils-3.2.1.tar.bz2
Type: ipkg
Description:  contains collection of programs for inspecting and manipulating configuration
 of PCI devices
http://mj.ucw.cz/pciutils.shtml
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/utils/minicom/Makefile
Package: minicom
Submenu: Terminal
Version: 2.7-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncurses
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Terminal emulation program
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: minicom-2.7.tar.gz
Type: ipkg
Description: Terminal emulation program
http://alioth.debian.org/projects/minicom/
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/utils/owfs/Makefile
Package: owfs
Submenu: Filesystem
Version: 2.9p5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libow +libfuse +fuse-utils
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: OWFS - fuse file system
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: owfs-2.9p5.tar.gz
Type: ipkg
Description:     OWFS is a suite of programs that designed to make the 1-wire bus and its
  devices easily accessible. The underlying priciple is to create a virtual
  filesystem, with the unique ID being the directory, and the individual
  properties of the device are represented as simple files that can be read
  and written.

  Details of the individual slave or master design are hidden behind a
  consistent interface. The goal is to provide an easy set of tools for a
  software designer to create monitoring or control applications. There are
  some performance enhancements in the implementation, including data caching,
  parallel access to bus masters, and aggregation of device communication.
  Still the fundemental goal has been ease of use, flexibility and correctness
  rather than speed.

  This package contains the OWFS fuse filesystem.
http://owfs.sourceforge.net/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: owshell
Submenu: Filesystem
Version: 2.9p5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libow +USE_UCLIBC:librpc
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: OWFS - shell utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: owfs-2.9p5.tar.gz
Type: ipkg
Description:     OWFS is a suite of programs that designed to make the 1-wire bus and its
  devices easily accessible. The underlying priciple is to create a virtual
  filesystem, with the unique ID being the directory, and the individual
  properties of the device are represented as simple files that can be read
  and written.

  Details of the individual slave or master design are hidden behind a
  consistent interface. The goal is to provide an easy set of tools for a
  software designer to create monitoring or control applications. There are
  some performance enhancements in the implementation, including data caching,
  parallel access to bus masters, and aggregation of device communication.
  Still the fundemental goal has been ease of use, flexibility and correctness
  rather than speed.

  This package contains the OWFS shell utilities.
http://owfs.sourceforge.net/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: owserver
Submenu: Filesystem
Version: 2.9p5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libow +libpthread
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: OWFS - network server
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: owfs-2.9p5.tar.gz
Type: ipkg
Description:     OWFS is a suite of programs that designed to make the 1-wire bus and its
  devices easily accessible. The underlying priciple is to create a virtual
  filesystem, with the unique ID being the directory, and the individual
  properties of the device are represented as simple files that can be read
  and written.

  Details of the individual slave or master design are hidden behind a
  consistent interface. The goal is to provide an easy set of tools for a
  software designer to create monitoring or control applications. There are
  some performance enhancements in the implementation, including data caching,
  parallel access to bus masters, and aggregation of device communication.
  Still the fundemental goal has been ease of use, flexibility and correctness
  rather than speed.

  This package contains the OWFS network server.
http://owfs.sourceforge.net/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: owhttpd
Submenu: Filesystem
Version: 2.9p5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libow +libpthread
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: OWFS - http server
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: owfs-2.9p5.tar.gz
Type: ipkg
Description:     OWFS is a suite of programs that designed to make the 1-wire bus and its
  devices easily accessible. The underlying priciple is to create a virtual
  filesystem, with the unique ID being the directory, and the individual
  properties of the device are represented as simple files that can be read
  and written.

  Details of the individual slave or master design are hidden behind a
  consistent interface. The goal is to provide an easy set of tools for a
  software designer to create monitoring or control applications. There are
  some performance enhancements in the implementation, including data caching,
  parallel access to bus masters, and aggregation of device communication.
  Still the fundemental goal has been ease of use, flexibility and correctness
  rather than speed.

  This package contains the OWFS http server.
http://owfs.sourceforge.net/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: owftpd
Submenu: Filesystem
Version: 2.9p5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libow +libpthread
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: OWFS - ftp server
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: owfs-2.9p5.tar.gz
Type: ipkg
Description:     OWFS is a suite of programs that designed to make the 1-wire bus and its
  devices easily accessible. The underlying priciple is to create a virtual
  filesystem, with the unique ID being the directory, and the individual
  properties of the device are represented as simple files that can be read
  and written.

  Details of the individual slave or master design are hidden behind a
  consistent interface. The goal is to provide an easy set of tools for a
  software designer to create monitoring or control applications. There are
  some performance enhancements in the implementation, including data caching,
  parallel access to bus masters, and aggregation of device communication.
  Still the fundemental goal has been ease of use, flexibility and correctness
  rather than speed.

  This package contains the OWFS ftp server.
http://owfs.sourceforge.net/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: libow
Submenu: Filesystem
Version: 2.9p5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libusb-compat +libpthread
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: OWFS - common shared library
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: owfs-2.9p5.tar.gz
Type: ipkg
Description:     OWFS is a suite of programs that designed to make the 1-wire bus and its
  devices easily accessible. The underlying priciple is to create a virtual
  filesystem, with the unique ID being the directory, and the individual
  properties of the device are represented as simple files that can be read
  and written.

  Details of the individual slave or master design are hidden behind a
  consistent interface. The goal is to provide an easy set of tools for a
  software designer to create monitoring or control applications. There are
  some performance enhancements in the implementation, including data caching,
  parallel access to bus masters, and aggregation of device communication.
  Still the fundemental goal has been ease of use, flexibility and correctness
  rather than speed.

  This package contains the OWFS library.
http://owfs.sourceforge.net/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: libow-capi
Submenu: Filesystem
Version: 2.9p5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libow
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: OWFS - C-API library
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: owfs-2.9p5.tar.gz
Type: ipkg
Description:     OWFS is a suite of programs that designed to make the 1-wire bus and its
  devices easily accessible. The underlying priciple is to create a virtual
  filesystem, with the unique ID being the directory, and the individual
  properties of the device are represented as simple files that can be read
  and written.

  Details of the individual slave or master design are hidden behind a
  consistent interface. The goal is to provide an easy set of tools for a
  software designer to create monitoring or control applications. There are
  some performance enhancements in the implementation, including data caching,
  parallel access to bus masters, and aggregation of device communication.
  Still the fundemental goal has been ease of use, flexibility and correctness
  rather than speed.

  This package contains the OWFS C-API library.
http://owfs.sourceforge.net/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/utils/hamlib/Makefile
Package: hamlib
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +libhamlib
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Ham Radio Control utilities
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description:     Ham Radio Control Libraries is a development effort to provide a consistent
  interface for programmers wanting to incorporate radio control in their
  programs.

  This package contains the utilities and daemons.
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: libhamlib
Menu: 1
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libusb-1.0 +libltdl
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Ham Radio Control shared library
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description:     Ham Radio Control Libraries is a development effort to provide a consistent
  interface for programmers wanting to incorporate radio control in their
  programs.

  This package contains the hamlib shared library.
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-adat
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for ADAT
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for ADAT
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-alinco
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Alinco
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Alinco
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-amsat
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for AMSAT
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for AMSAT
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-aor
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for AOR
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for AOR
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-ars
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for ARS
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for ARS
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-celestron
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Celestron
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Celestron
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-drake
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Drake
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Drake
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-dummy
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for dummy
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for dummy
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-easycomm
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for EasyComm
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for EasyComm
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-flexradio
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for FlexRadio
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for FlexRadio
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-fodtrack
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for FodTrack
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for FodTrack
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-gs232a
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for GS-232A
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for GS-232A
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-heathkit
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Heathkit
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Heathkit
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-icom
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for ICOM
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for ICOM
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-jrc
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for JRC
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for JRC
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-kachina
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Kachina
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Kachina
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-kenwood
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Kenwood
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Kenwood
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-kit
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for kits
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for kits
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-lowe
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Lowe
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Lowe
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-m2
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for M2
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for M2
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-pcr
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for PCR
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for PCR
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-prm80
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for PRM80
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for PRM80
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-racal
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Racal
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Racal
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-rft
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for RFT
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for RFT
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-rotorez
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Rotor-EZ
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Rotor-EZ
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-rs
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for R&S
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for R&S
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-sartek
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for SARtek
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for SARtek
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-skanti
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Skanti
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Skanti
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-spid
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for SPID
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for SPID
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-tapr
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for TAPR
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for TAPR
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-tentec
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for TenTec
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for TenTec
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-ts7400
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for TS-7400
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for TS-7400
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-tuner
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Video for Linux tuner
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Video for Linux tuner
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-uniden
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Uniden
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Uniden
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-wj
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Watkins - Johnson
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Watkins - Johnson
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: hamlib-yaesu
Version: 1.2.15.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread libhamlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: for Yaesu
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: hamlib-1.2.15.3.tar.gz
Type: ipkg
Description: for Yaesu
http://hamlib.sourceforge.net
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@


Source-Makefile: feeds/packages/utils/collectd/Makefile
Package: collectd
Menu: 1
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +zlib +libltdl +libip4tc
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Lightweight system statistics collection daemon
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description:  collectd is a small daemon which collects system information periodically
 and provides mechanismns to store the values in a variety of ways.
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-apache
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-apache:libcurl
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: apache status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: apache status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-apcups
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: apcups status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: apcups status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-ascent
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-ascent:libcurl +PACKAGE_collectd-mod-ascent:libxml2
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: ascent status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: ascent status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-bind
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-bind:libcurl +PACKAGE_collectd-mod-bind:libxml2
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: BIND server/zone input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: BIND server/zone input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-conntrack
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: connection tracking table size input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: connection tracking table size input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-contextswitch
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: context switch input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: context switch input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-cpu
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: CPU input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: CPU input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-csv
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: CSV output plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: CSV output plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-curl
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-curl:libcurl
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: cURL input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: cURL input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-df
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: disk space input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: disk space input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-disk
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: disk usage/timing input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: disk usage/timing input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-dns
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-dns:libpcap
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: DNS traffic input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: DNS traffic input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-email
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: email output plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: email output plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-exec
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: process exec input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: process exec input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-filecount
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: file count input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: file count input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-fscache
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: file-system based caching framework input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: file-system based caching framework input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-interface
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: network interfaces input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: network interfaces input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-iptables
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-iptables:iptables +libiptc
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: iptables status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: iptables status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-irq
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: interrupt usage input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: interrupt usage input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-iwinfo
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-iwinfo:libiwinfo
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: libiwinfo wireless statistics plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: libiwinfo wireless statistics plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-load
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: system load input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: system load input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-logfile
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: log files output plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: log files output plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-madwifi
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: MadWifi status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: MadWifi status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-memory
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: physical memory usage input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: physical memory usage input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-netlink
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-netlink:ip @BROKEN
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: netlink input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: netlink input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-network
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: network input/output plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: network input/output plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-nginx
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-nginx:libcurl
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: nginx status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: nginx status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-ntpd
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: NTP daemon status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: NTP daemon status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-olsrd
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: OLSRd status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: OLSRd status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-onewire
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-onewire:libow-capi @BROKEN
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: onewire sensor input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: onewire sensor input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-openvpn
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: OpenVPN traffic/compression input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: OpenVPN traffic/compression input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-ping
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-ping:liboping
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: ping status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: ping status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-postgresql
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-postgresql:libpq
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: PostgreSQL status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: PostgreSQL status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-powerdns
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: PowerDNS server status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: PowerDNS server status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-processes
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: process status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: process status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-protocols
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: network protocols input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: network protocols input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-rrdtool
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-rrdtool:librrd1
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: RRDtool output plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: RRDtool output plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-sensors
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-sensors:libsensors @BROKEN
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: lm_sensors input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: lm_sensors input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-snmp
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-snmp:libnetsnmp
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: SNMP input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: SNMP input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-syslog
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: syslog output plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: syslog output plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-tail
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: tail input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: tail input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-table
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: table-like structured file input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: table-like structured file input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-teamspeak2
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: TeamSpeak2 input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: TeamSpeak2 input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-ted
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd @((!TARGET_avr32)||BROKEN)
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: The Energy Detective input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: The Energy Detective input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-tcpconns
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: TCP connection tracking input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: TCP connection tracking input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-thermal
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: system temperatures input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: system temperatures input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-unixsock
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: unix socket output plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: unix socket output plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-uptime
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: uptime status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: uptime status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-users
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: user logged in status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: user logged in status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-vmem
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: virtual memory usage input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: virtual memory usage input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-wireless
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: wireless status input plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: wireless status input plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: collectd-mod-write-http
Version: 4.10.8-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread collectd +PACKAGE_collectd-mod-write-http:libcurl
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: HTTP POST output plugin
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: collectd-4.10.8.tar.bz2
Type: ipkg
Description: HTTP POST output plugin
http://verplant.org/collectd/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/utils/uvcdynctrl/Makefile
Package: uvcdynctrl
Menu: 1
Version: 0.2.4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libwebcam +PACKAGE_UVCDYNCTRL_UDEV_RULE:udev
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Manage dynamic controls in uvcvideo
Maintainer: Roger D <rogerdammit@gmail.com>
Source: libwebcam-src-0.2.4.tar.gz
Type: ipkg
Description:   The webcam-tools package contains the following two components:
  - libwebcam: Webcam Library (LGPL)
  - uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)
http://sourceforge.net/projects/libwebcam/
Roger D <rogerdammit@gmail.com>
@@
Config:
config PACKAGE_UVCDYNCTRL_UDEV_RULE
	bool "uvcdynctrl udev rule, selects udev"
	depends on PACKAGE_uvcdynctrl
	default no
	help
	  Installs an udev rule to load uvcdynctrl with dynamic controls
	  from xml files in /usr/share/uvcdynctrl when a webcam is attached.
@@

Package: libwebcam
Version: 0.2.4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libxml2 +libiconv-full
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Webcam library
Maintainer: Roger D <rogerdammit@gmail.com>
Source: libwebcam-src-0.2.4.tar.gz
Type: ipkg
Description:     The webcam-tools package contains the following two components:
  - libwebcam: Webcam Library (LGPL)
  - uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)
http://sourceforge.net/projects/libwebcam/
Roger D <rogerdammit@gmail.com>
@@


Source-Makefile: feeds/packages/utils/pcsc-lite/Makefile
Package: libpcsclite
Version: 1.8.11-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libusb-1.0 +libpthread +librt
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Middleware to access a smart card using SCard API (PC/SC). (library)
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: pcsc-lite-1.8.11.tar.bz2
Type: ipkg
Description:     The purpose of PC/SC Lite is to provide a Windows(R) SCard
  interface in a very small form factor for communicating to
  smart cards and smart cards readers.
  .
  This package contains the PC/SC shared library.
http://pcsclite.alioth.debian.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: pcscd
Version: 1.8.11-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpcsclite
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Middleware to access a smart card using SCard API (PC/SC). (daemon)
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: pcsc-lite-1.8.11.tar.bz2
Type: ipkg
Description:     The purpose of PC/SC Lite is to provide a Windows(R) SCard
  interface in a very small form factor for communicating to
  smart cards and smart cards readers.
  .
  This package contains the PC/SC daemon.
http://pcsclite.alioth.debian.org/
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/utils/rng-tools/Makefile
Package: rng-tools
Version: 5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Depends: USE_UCLIBC:argp-standalone
Section: utils
Category: Utilities
Title: Daemon for adding entropy to kernel entropy pool
Maintainer: Hannu Nyman <hannu.nyman@iki.fi>
Source: rng-tools-5.tar.gz
Type: ipkg
Description: Daemon for adding entropy to kernel entropy pool
http://sourceforge.net/projects/gkernel/
Hannu Nyman <hannu.nyman@iki.fi>
@@


Source-Makefile: feeds/packages/utils/cmdpad/Makefile
Package: cmdpad
Version: 0.0.3-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: execute commands when a key is pressed, released or hold down
Maintainer: Ted Hess <thess@kitschensync.net>
Source: cmdpad-0.0.3.tgz
Type: ipkg
Description: 	cmdpad - execute commands when a key is pressed, released or hold down.
	Should be started from /etc/rc or /etc/rc.local. To run it as deamon you
	need to start it with '&'. All logs are printed to standard out and standard
	error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
	searches for /etc/cmdpad.conf and load the key bindings. Then wait for
	key event and check each command to see if it should be run.
http://cmdpad.sourceforge.net/index.php
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/utils/zip/Makefile
Package: zip
Submenu: Compression
Version: 3.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Archiver for .zip files
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: zip30.tar.gz
Type: ipkg
Description: 	This is InfoZIP's zip program. It produces files that are fully
	compatible with the popular PKZIP program; however, the command line
	options are not identical. In other words, the end result is the same,
	but the methods differ.
http://infozip.sourceforge.net/Zip.html
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/utils/rrdtool1/Makefile
Package: librrd1
Version: 1.0.50-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Round Robin Database (RRD) management library
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: rrdtool-1.0.50.tar.gz
Type: ipkg
Description:  RRD is the Acronym for Round Robin Database. RRD is a system to store and
 display time-series data (i.e. network bandwidth, machine-room temperature,
 server load average). It stores the data in a very compact way that will
 not expand over time, and it presents useful graphs by processing the data
 to enforce a certain data density. It can be used either via simple wrapper
 scripts (from shell or Perl) or via frontends that poll network devices and
 put friendly user interface on it.

 This is version 1.0.x with cgilib-0.4, gd1.3 and libpng-1.0.9 linked into
 librrd.so. The library is much smaller compared to the 1.2.x version with
 separate dynamic linked libraries.
 This package contains a shared library, used by other programs.
http://oss.oetiker.ch/rrdtool/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: rrdcgi1
Version: 1.0.50-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librrd1
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Round Robin Database (RRD) CGI graphing tool
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: rrdtool-1.0.50.tar.gz
Type: ipkg
Description:  RRD is the Acronym for Round Robin Database. RRD is a system to store and
 display time-series data (i.e. network bandwidth, machine-room temperature,
 server load average). It stores the data in a very compact way that will
 not expand over time, and it presents useful graphs by processing the data
 to enforce a certain data density. It can be used either via simple wrapper
 scripts (from shell or Perl) or via frontends that poll network devices and
 put friendly user interface on it.

 This is version 1.0.x with cgilib-0.4, gd1.3 and libpng-1.0.9 linked into
 librrd.so. The library is much smaller compared to the 1.2.x version with
 separate dynamic linked libraries.
 This package contains the rrdcgi tool used to create web pages containing
 RRD graphs based on templates.
http://oss.oetiker.ch/rrdtool/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: rrdtool1
Version: 1.0.50-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librrd1
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Round Robin Database (RRD) management tools
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: rrdtool-1.0.50.tar.gz
Type: ipkg
Description:  RRD is the Acronym for Round Robin Database. RRD is a system to store and
 display time-series data (i.e. network bandwidth, machine-room temperature,
 server load average). It stores the data in a very compact way that will
 not expand over time, and it presents useful graphs by processing the data
 to enforce a certain data density. It can be used either via simple wrapper
 scripts (from shell or Perl) or via frontends that poll network devices and
 put friendly user interface on it.

 This is version 1.0.x with cgilib-0.4, gd1.3 and libpng-1.0.9 linked into
 librrd.so. The library is much smaller compared to the 1.2.x version with
 separate dynamic linked libraries.
 This package contains command line tools used to manage RRDs.
http://oss.oetiker.ch/rrdtool/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/utils/stm32flash/Makefile
Package: stm32flash
Version: 0.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Firmware flash tool for STM32's serial bootloader
Maintainer: Christian Pointner <equinox@spreadspace.org>
Source: stm32flash-0.3.tar.gz
Type: ipkg
Description:   This tool can be used to burn firmware images to STM32 ARM processors
  using the built-in serial bootloader.
http://code.google.com/p/stm32flash/
Christian Pointner <equinox@spreadspace.org>
@@


Source-Makefile: feeds/packages/utils/flashrom/Makefile
Package: flashrom
Version: 0.9.7-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib +pciutils +(TARGET_x86||TARGET_x86_64):dmidecode +libftdi
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: FlashROM Utility
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: flashrom-0.9.7.tar.bz2
Type: ipkg
Description:  flashrom is an utility for identifying, reading, writing, verifying
 and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
 /firmware images.
http://www.flashrom.org/
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/utils/bzip2/Makefile
Package: libbz2
Version: 1.0.6-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: bzip2 library.
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: bzip2-1.0.6.tar.gz
Type: ipkg
Description: 	bzip2 is a freely available, patent free, high-quality
	data compressor. This packages provides libbz2 library.
http://www.bzip.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: bzip2
Version: 1.0.6-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libbz2
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: bzip2 is a compression utility.
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: bzip2-1.0.6.tar.gz
Type: ipkg
Description: 	bzip2 is a freely available, patent free, high-quality
	data compressor. This package provides the binary.
http://www.bzip.org/
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/utils/tmux/Makefile
Package: tmux
Version: 1.9a-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncurses +libevent2 +libpthread +librt
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Terminal multiplexer
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: tmux-1.9a.tar.gz
Type: ipkg
Description:   tmux is a modern, BSD-licensed alternative to GNU screen.
http://tmux.sourceforge.net/
Maxim Storchak <m.storchak@gmail.com>
@@


Source-Makefile: feeds/packages/utils/smartmontools/Makefile
Package: smartmontools
Version: 6.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +USE_UCLIBCXX:uclibcxx +USE_LIBSTDCXX:libstdcpp
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: S.M.A.R.T Monitoring Tool
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: smartmontools-6.2.tar.gz
Type: ipkg
Description:   smartmontools contains utility programs (smartctl) to
  control/monitor storage systems using the Self-Monitoring, Analysis
  and Reporting Technology System (S.M.A.R.T.) built into most modern
  ATA and SCSI disks. It is derived from smartsuite.
http://smartmontools.sourceforge.net/
Maxim Storchak <m.storchak@gmail.com>
@@

Package: smartd
Version: 6.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +USE_UCLIBCXX:uclibcxx +USE_LIBSTDCXX:libstdcpp
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: S.M.A.R.T Monitoring Daemon
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: smartmontools-6.2.tar.gz
Type: ipkg
Description:   smartmontools contains utility programs (smartd) to
  control/monitor storage systems using the Self-Monitoring, Analysis
  and Reporting Technology System (S.M.A.R.T.) built into most modern
  ATA and SCSI disks. It is derived from smartsuite.
http://smartmontools.sourceforge.net/
Maxim Storchak <m.storchak@gmail.com>
@@


Source-Makefile: feeds/packages/utils/rtl-sdr/Makefile
Package: rtl-sdr
Version: 2013-06-12
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librt +libpthread +librtlsdr
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Software Defined Radio with Realtek RTL2832U
Maintainer: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
Source: rtl-sdr-2013-06-12-8c3a99c8f7a88d7d2a05845d4b20cfcdacac4054.tar.gz
Type: ipkg
Description:     rtl-sdr allows DVB-T dongles based on the Realtek RTL2832U to be used as
  an inexpensive SDR.

  This package contains the utilities and daemons.
http://sdr.osmocom.org/trac/wiki/rtl-sdr
Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
@@

Package: librtlsdr
Version: 2013-06-12
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libusb-1.0
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Software Defined Radio with Realtek RTL2832U shared library library
Maintainer: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
Source: rtl-sdr-2013-06-12-8c3a99c8f7a88d7d2a05845d4b20cfcdacac4054.tar.gz
Type: ipkg
Description:     rtl-sdr allows DVB-T dongles based on the Realtek RTL2832U to be used as
  an inexpensive SDR.

  This package contains the librtlsdr shared library.
http://sdr.osmocom.org/trac/wiki/rtl-sdr
Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
@@


Source-Makefile: feeds/packages/utils/coreutils/Makefile
Package: coreutils
Menu: 1
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: The GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:  Full versions of standard GNU utilities. Normally, you would not use this
 package, since the functionality in BusyBox is more than sufficient and
 smaller.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-base64
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility base64 from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU base64 utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-basename
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility basename from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU basename utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-cat
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility cat from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU cat utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-chcon
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility chcon from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU chcon utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-chgrp
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility chgrp from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU chgrp utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-chmod
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility chmod from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU chmod utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-chown
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility chown from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU chown utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-chroot
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility chroot from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU chroot utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-cksum
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility cksum from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU cksum utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-comm
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility comm from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU comm utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-cp
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility cp from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU cp utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-csplit
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility csplit from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU csplit utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-cut
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility cut from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU cut utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-date
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility date from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU date utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-dd
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility dd from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU dd utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-dir
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility dir from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU dir utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-dircolors
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility dircolors from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU dircolors utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-dirname
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility dirname from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU dirname utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-du
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility du from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU du utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-echo
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility echo from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU echo utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-env
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility env from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU env utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-expand
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility expand from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU expand utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-expr
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils +libgmp
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility expr from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU expr utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-factor
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils +libgmp
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility factor from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU factor utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-false
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility false from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU false utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-fmt
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility fmt from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU fmt utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-fold
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility fold from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU fold utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-groups
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility groups from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU groups utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-head
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility head from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU head utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-hostid
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility hostid from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU hostid utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-id
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility id from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU id utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-install
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility install from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU install utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-join
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility join from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU join utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-kill
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility kill from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU kill utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-link
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility link from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU link utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-ln
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility ln from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU ln utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-logname
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility logname from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU logname utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-ls
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility ls from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU ls utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-md5sum
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility md5sum from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU md5sum utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-mkdir
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility mkdir from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU mkdir utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-mkfifo
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility mkfifo from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU mkfifo utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-mknod
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility mknod from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU mknod utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-mktemp
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility mktemp from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU mktemp utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-mv
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility mv from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU mv utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-nice
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility nice from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU nice utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-nl
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility nl from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU nl utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-nohup
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility nohup from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU nohup utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-nproc
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility nproc from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU nproc utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-od
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility od from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU od utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-paste
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility paste from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU paste utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-pathchk
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility pathchk from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU pathchk utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-pinky
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility pinky from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU pinky utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-pr
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility pr from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU pr utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-printenv
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility printenv from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU printenv utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-printf
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility printf from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU printf utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-ptx
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility ptx from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU ptx utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-pwd
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility pwd from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU pwd utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-readlink
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility readlink from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU readlink utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-realpath
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility realpath from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU realpath utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-rm
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility rm from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU rm utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-rmdir
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility rmdir from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU rmdir utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-runcon
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility runcon from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU runcon utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-seq
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility seq from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU seq utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-sha1sum
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility sha1sum from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU sha1sum utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-sha224sum
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility sha224sum from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU sha224sum utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-sha256sum
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility sha256sum from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU sha256sum utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-sha384sum
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility sha384sum from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU sha384sum utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-sha512sum
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility sha512sum from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU sha512sum utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-shred
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility shred from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU shred utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-shuf
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility shuf from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU shuf utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-sleep
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility sleep from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU sleep utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-sort
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils +libpthread
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility sort from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU sort utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-split
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility split from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU split utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-stat
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility stat from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU stat utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-stdbuf
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility stdbuf from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU stdbuf utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-stty
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility stty from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU stty utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-sum
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility sum from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU sum utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-sync
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility sync from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU sync utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-tac
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility tac from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU tac utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-tail
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility tail from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU tail utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-tee
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility tee from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU tee utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-test
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility test from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU test utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-timeout
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils +librt
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility timeout from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU timeout utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-touch
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility touch from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU touch utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-tr
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility tr from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU tr utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-true
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility true from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU true utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-truncate
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility truncate from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU truncate utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-tsort
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility tsort from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU tsort utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-tty
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility tty from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU tty utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-uname
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility uname from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU uname utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-unexpand
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility unexpand from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU unexpand utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-uniq
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility uniq from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU uniq utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-unlink
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility unlink from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU unlink utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-uptime
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility uptime from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU uptime utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-users
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility users from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU users utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-vdir
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility vdir from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU vdir utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-wc
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility wc from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU wc utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-who
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility who from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU who utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-whoami
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility whoami from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU whoami utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: coreutils-yes
Version: 8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread coreutils
Menu-Depends: 
Provides: 
Build-Depends: libpthread
Section: utils
Category: Utilities
Title: Utility yes from the GNU core utilities
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: coreutils-8.16.tar.xz
Type: ipkg
Description:   Full version of standard GNU yes utility. Normally, you would not use this
  package, since the functionality in BusyBox is more than sufficient.
http://www.gnu.org/software/coreutils/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/utils/bash/Makefile
Package: bash
Version: 4.2-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncurses
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: The GNU Bourne Again SHell
Maintainer: Marcel Denia <naoir@gmx.net>
Source: bash-4.2.tar.gz
Type: ipkg
Description: 	Bash is an sh-compatible command language interpreter that executes
	commands read from the standard input or from a file. Bash also
	incorporates useful features from the Korn and C shells (ksh and csh).
http://www.gnu.org/software/bash/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/utils/dump1090/Makefile
Package: dump1090
Version: 2014-07-25
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +librtlsdr
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Mode S decoder for the Realtek RTL2832U
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: dump1090-2014-07-25.tar.gz
Type: ipkg
Description:  Dump1090 is a Mode S decoder specifically designed for RTLSDR devices.
 Embedded HTTP server that displays the currently detected aircrafts on
 Google Maps. Network output in Basestation and AVR formats.
https://github.com/antirez/dump1090
Álvaro Fernández Rojas <noltari@gmail.com>
@@
Config:
	source "feeds/packages/utils/dump1090/Config.in"
@@


Source-Makefile: feeds/packages/utils/ccid/Makefile
Package: ccid
Version: 1.4.17-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libusb-1.0 +libpcsclite
Menu-Depends: 
Provides: 
Build-Depends: libtool libintl libiconv
Section: libs
Category: Libraries
Title: Generic USB CCID smart card reader driver
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: ccid-1.4.17.tar.bz2
Type: ipkg
Description:   Generic USB CCID (Chip/Smart Card Interface Devices) driver and ICCD
  (Integrated Circuit(s) Card Devices).
http://pcsclite.alioth.debian.org/ccid.html
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/utils/alsa-utils/Makefile
Package: alsa-utils
Version: 1.0.28-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +alsa-lib +libncurses +libpthread
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: ALSA (Advanced Linux Sound Architecture) utilities
Maintainer: Ted Hess <thess@kitschensync.net>
Source: alsa-utils-1.0.28.tar.bz2
Type: ipkg
Description: ALSA (Advanced Linux Sound Architecture) utilities
http://www.alsa-project.org/
Ted Hess <thess@kitschensync.net>
@@

Package: alsa-utils-seq
Version: 1.0.28-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +alsa-lib +libpthread
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: ALSA sequencer utilities
Maintainer: Ted Hess <thess@kitschensync.net>
Source: alsa-utils-1.0.28.tar.bz2
Type: ipkg
Description: ALSA sequencer utilities
http://www.alsa-project.org/
Ted Hess <thess@kitschensync.net>
@@

Package: alsa-utils-tests
Version: 1.0.28-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +alsa-lib +libpthread
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: ALSA utilities test data (adds ~1.3M to image)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: alsa-utils-1.0.28.tar.bz2
Type: ipkg
Description: ALSA utilities test data (adds ~1.3M to image)
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/utils/haserl/Makefile
Package: haserl
Menu: 1
Version: 0.9.33-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +HASERL_with_lua:liblua
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: A CGI wrapper to embed shell scripts in HTML documents
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: haserl-0.9.33.tar.gz
Type: ipkg
Description: A CGI wrapper to embed shell scripts in HTML documents
http://haserl.sourceforge.net/
Maxim Storchak <m.storchak@gmail.com>
@@
Config:
	source "feeds/packages/utils/haserl/Config.in"
@@


Source-Makefile: feeds/packages/utils/zile/Makefile
Package: zile
Submenu: Editors
Version: 2.3.24-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncursesw
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: very small emacs-like editor
Maintainer: Ted Hess <thess@kitschensync.net>
Source: zile-2.3.24.tar.gz
Type: ipkg
Description: 	Zile is a small Emacs clone. Zile is a customizable, self-documenting
	real-time display editor. Zile was written to be as similar as possible
	to Emacs; every Emacs user should feel at home with Zile.
http://www.gnu.org/software/zile/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/utils/ccrypt/Makefile
Package: ccrypt
Version: 1.10-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: ccrypt is a utility for encrypting and decrypting files and streams
Maintainer: Hannu Nyman <hannu.nyman@iki.fi>
Source: ccrypt-1.10.tar.gz
Type: ipkg
Description: ccrypt is a utility for encrypting and decrypting files and streams
http://ccrypt.sourceforge.net/
Hannu Nyman <hannu.nyman@iki.fi>
@@


Source-Makefile: feeds/packages/utils/nano/Makefile
Package: nano
Submenu: Editors
Version: 2.3.6-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncurses
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: An enhanced clone of the Pico text editor
Maintainer: Jonathan Bennett <JBennett@incomsystems.biz>
Source: nano-2.3.6.tar.gz
Type: ipkg
Description:   GNU nano (Nano's ANOther editor, or Not ANOther editor) is an enhanced clone
  of the Pico text editor.
http://www.nano-editor.org/
Jonathan Bennett <JBennett@incomsystems.biz>
@@


Source-Makefile: feeds/packages/utils/cryptodev-linux/Makefile
Package: kmod-cryptodev
Submenu: Cryptographic API modules
Default: m if ALL
Version: <LINUX_VERSION>+1.6--1
Depends: +kmod-crypto-core +kmod-crypto-authenc +kmod-crypto-hash
Menu-Depends: 
Provides: 
Section: kernel
Category: Kernel modules
Title: Driver for cryptographic acceleration
Maintainer: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
Source: cryptodev-linux-1.6.tar.gz
Type: ipkg
Description:   This is a driver for that allows to use the Linux kernel supported
  hardware ciphers by user-space applications.
http://cryptodev-linux.org/
Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
@@


Source-Makefile: feeds/packages/utils/attr/Makefile
Package: attr
Submenu: Filesystem
Version: 20140610-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libattr
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Extended attributes (xattr) manipulation utils
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: attr-20140610.tar.gz
Type: ipkg
Description:   Extended attributes support
 This package provides xattr manipulation utilities
 - attr
 - getfattr
 - setfattr
http://savannah.nongnu.org/projects/attr
Maxim Storchak <m.storchak@gmail.com>
@@

Package: libattr
Submenu: Filesystem
Version: 20140610-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Extended attributes (xattr) manipulation library
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: attr-20140610.tar.gz
Type: ipkg
Kernel-Config: CONFIG_CIFS_XATTR=y CONFIG_EXT4_FS_XATTR=y CONFIG_JFFS2_FS_XATTR=y CONFIG_REISERFS_FS_XATTR=y CONFIG_SQUASHFS_XATTR=y CONFIG_TMPFS_XATTR=y 
Description:   Extended attributes support
 This package provides libattr
http://savannah.nongnu.org/projects/attr
Maxim Storchak <m.storchak@gmail.com>
@@


Source-Makefile: feeds/packages/utils/acl/Makefile
Package: acl
Submenu: Filesystem
Version: 20140610-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libacl
Menu-Depends: 
Provides: 
Section: utils
Category: Utilities
Title: Access control list (ACL) manipulation utils
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: acl-20140610.tar.gz
Type: ipkg
Description:   Access control list support
 This package provides ACL manipulation utilities
 - chacl
 - getfacl
 - setfacl
http://savannah.nongnu.org/projects/acl
Maxim Storchak <m.storchak@gmail.com>
@@

Package: libacl
Submenu: Filesystem
Version: 20140610-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libattr
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Access control list (ACL) manipulation library
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: acl-20140610.tar.gz
Type: ipkg
Kernel-Config: CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_FS_POSIX_ACL=y CONFIG_HFSPLUS_FS_POSIX_ACL=y CONFIG_JFFS2_FS_POSIX_ACL=y CONFIG_JFS_POSIX_ACL=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_XFS_POSIX_ACL=y 
Description:   Access control list support
 This package provides libacl
http://savannah.nongnu.org/projects/acl
Maxim Storchak <m.storchak@gmail.com>
@@


Source-Makefile: feeds/packages/net/lighttpd/Makefile
Package: lighttpd
Menu: 1
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +LIGHTTPD_SSL:libopenssl +libpcre +libpthread
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: A flexible and lightweight web server
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: A flexible and lightweight web server
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@
Config:
config LIGHTTPD_SSL
	bool "SSL support"
	depends on PACKAGE_lighttpd
	default y
	help
	  Implements SSL support in lighttpd (using libopenssl). This
	  option is required if you enable the SSL engine in your
	  lighttpd confguration file.
@@

Package: lighttpd-mod-access
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Access restrictions module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Access restrictions module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-accesslog
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Access logging module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Access logging module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-alias
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Directory alias module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Directory alias module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-auth
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Authentication module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Authentication module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-cgi
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: CGI module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: CGI module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-cml
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Cache Meta Language module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Cache Meta Language module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-compress
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd +zlib
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Compress output module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Compress output module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-evasive
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Evasive module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Evasive module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-evhost
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Exnhanced Virtual-Hosting module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Exnhanced Virtual-Hosting module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-expire
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Expire module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Expire module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-extforward
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Extract client IP module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Extract client IP module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-fastcgi
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: FastCGI module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: FastCGI module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-flv-streaming
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: flv streaming module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: flv streaming module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-magnet
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: magnet module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: magnet module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-proxy
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Proxy module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Proxy module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-redirect
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd +libpcre
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: URL redirection module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: URL redirection module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-rewrite
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd +libpcre
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: URL rewriting module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: URL rewriting module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-rrdtool
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: rrdtool module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: rrdtool module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-scgi
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: SCGI module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: SCGI module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-secdownload
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Secure and fast download module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Secure and fast download module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-setenv
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Environment variable setting module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Environment variable setting module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-simple-vhost
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Simple virtual hosting module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Simple virtual hosting module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-ssi
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd +libpcre
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: SSI module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: SSI module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-status
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Server status display module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Server status display module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-trigger-b4-dl
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd +libpcre
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Trigger before download module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: Trigger before download module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-userdir
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: User directory module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: User directory module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-usertrack
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: User tracking module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: User tracking module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@

Package: lighttpd-mod-webdav
Submenu: Web Servers/Proxies
Version: 1.4.35-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lighttpd +libsqlite3 +libuuid +libxml2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: WebDAV module
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: lighttpd-1.4.35.tar.xz
Type: ipkg
Description: WebDAV module
http://www.lighttpd.net/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/net/mosquitto/Makefile
Package: mosquitto
Version: 1.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librt +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: net
Category: Network
Title: mosquitto - an MQTT message broker (with SSL support)
Maintainer: Karl Palsson <karlp@remake.is>
Source: mosquitto-1.3.5.tar.gz
Type: ipkg
Description: 	 mosquitto is a message broker that supports v3.1 of the MQ Telemetry
Transport protocol. MQTT provides a lightweight method for
messaging using a publish/subscribe model.

This package also includes some basic support for configuring via UCI
	This package is built with SSL support
http://www.mosquitto.org/
Karl Palsson <karlp@remake.is>
@@

Package: mosquitto-nossl
Version: 1.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librt
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: mosquitto - an MQTT message broker (without SSL support)
Maintainer: Karl Palsson <karlp@remake.is>
Source: mosquitto-1.3.5.tar.gz
Type: ipkg
Description:          mosquitto is a message broker that supports v3.1 of the MQ Telemetry
Transport protocol. MQTT provides a lightweight method for
messaging using a publish/subscribe model.

This package also includes some basic support for configuring via UCI
        This package is built WITHOUT SSL support.
http://www.mosquitto.org/
Karl Palsson <karlp@remake.is>
@@

Package: libmosquitto
Version: 1.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +librt +libcares +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: libs
Category: Libraries
Title: mosquitto - client library (With SSL Support)
Maintainer: Karl Palsson <karlp@remake.is>
Source: mosquitto-1.3.5.tar.gz
Type: ipkg
Description:      Library required for mosquitto's command line client tools, also for
use by any third party software that wants to communicate with a
mosquitto server.

Should be useable for communicating with any MQTT v3.1 compatible
server, such as IBM's RSMB, in addition to Mosquitto
    This package is built with SSL support
http://www.mosquitto.org/
Karl Palsson <karlp@remake.is>
@@

Package: libmosquitto-nossl
Version: 1.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +librt +libcares
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: libs
Category: Libraries
Title: mosquitto - client library (Without SSL Support)
Maintainer: Karl Palsson <karlp@remake.is>
Source: mosquitto-1.3.5.tar.gz
Type: ipkg
Description:      Library required for mosquitto's command line client tools, also for
use by any third party software that wants to communicate with a
mosquitto server.

Should be useable for communicating with any MQTT v3.1 compatible
server, such as IBM's RSMB, in addition to Mosquitto
    This package is built without SSL support
http://www.mosquitto.org/
Karl Palsson <karlp@remake.is>
@@

Package: mosquitto-client
Version: 1.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librt +libcares +libmosquitto
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: net
Category: Network
Title: mosquitto - client tools (With SSL support)
Maintainer: Karl Palsson <karlp@remake.is>
Source: mosquitto-1.3.5.tar.gz
Type: ipkg
Description:  Command line client tools for publishing messages to MQTT servers
and subscribing to topics.
        This package is built with SSL support
http://www.mosquitto.org/
Karl Palsson <karlp@remake.is>
@@

Package: mosquitto-client-nossl
Version: 1.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +librt +libcares +libmosquitto-nossl
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: mosquitto - client tools (Without SSL support)
Maintainer: Karl Palsson <karlp@remake.is>
Source: mosquitto-1.3.5.tar.gz
Type: ipkg
Description:  Command line client tools for publishing messages to MQTT servers
and subscribing to topics.
        This package is built without SSL support
http://www.mosquitto.org/
Karl Palsson <karlp@remake.is>
@@


Source-Makefile: feeds/packages/net/softflowd/Makefile
Package: softflowd
Version: 0.9.9-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpcap
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: softflowd
Maintainer: Ross Vandegrift <ross@kallisti.us>
Source: softflowd-0.9.9.tar.gz
Type: ipkg
Description: 	Software netflow exporter
http://code.google.com/p/softflowd/
Ross Vandegrift <ross@kallisti.us>
@@


Source-Makefile: feeds/packages/net/git/Makefile
Package: git
Submenu: Version Control Systems
Version: 2.0.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +libpthread
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: The fast version control system
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: git-2.0.0.tar.xz
Type: ipkg
Description:  Git is a free & open source, distributed version control system
 designed to handle everything from small to very large projects
 with speed and efficiency.
http://git-scm.com
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/net/uanytun/Makefile
Package: uanytun
Submenu: VPN
Version: 0.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +kmod-tun +libgcrypt
Menu-Depends: 
Provides: 
Build-Variant: gcrypt
Section: net
Category: Network
Title: micro anycast tunneling daemon (gcrypt)
Maintainer: Christian Pointner <equinox@spreadspace.org>
Source: uanytun-0.3.5.tar.gz
Type: ipkg
Description: uAnytun is a tiny implementation of SATP the secure anycast tunneling protocol.
  SATP defines a protocol used for communication between any combination of
  unicast and anycast tunnel endpoints.  It has less protocol overhead than
  IPSec in Tunnel mode and allows tunneling of every ETHER TYPE protocol (e.g.
  ethernet, ip, arp ...). SATP directly includes cryptography and message
  authentication based on the methods used by SRTP.  It is intended to deliver
  a generic, scaleable and secure solution for tunneling and relaying of packets
  of any protocol.
  Unlike Anytun which is a full featured implementation uAnytun has no support
  for multiple connections or synchronisation. It is a small single threaded
  implementation intended to act as a client on small platforms.
http://www.anytun.org/
Christian Pointner <equinox@spreadspace.org>
@@

Package: uanytun-nettle
Submenu: VPN
Version: 0.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +kmod-tun +libnettle
Menu-Depends: 
Provides: 
Build-Variant: nettle
Section: net
Category: Network
Title: micro anycast tunneling daemon (nettle)
Maintainer: Christian Pointner <equinox@spreadspace.org>
Source: uanytun-0.3.5.tar.gz
Type: ipkg
Description: uAnytun is a tiny implementation of SATP the secure anycast tunneling protocol.
  SATP defines a protocol used for communication between any combination of
  unicast and anycast tunnel endpoints.  It has less protocol overhead than
  IPSec in Tunnel mode and allows tunneling of every ETHER TYPE protocol (e.g.
  ethernet, ip, arp ...). SATP directly includes cryptography and message
  authentication based on the methods used by SRTP.  It is intended to deliver
  a generic, scaleable and secure solution for tunneling and relaying of packets
  of any protocol.
  Unlike Anytun which is a full featured implementation uAnytun has no support
  for multiple connections or synchronisation. It is a small single threaded
  implementation intended to act as a client on small platforms.
http://www.anytun.org/
Christian Pointner <equinox@spreadspace.org>
@@

Package: uanytun-sslcrypt
Submenu: VPN
Version: 0.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +kmod-tun +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: sslcrypt
Section: net
Category: Network
Title: micro anycast tunneling daemon (openssl)
Maintainer: Christian Pointner <equinox@spreadspace.org>
Source: uanytun-0.3.5.tar.gz
Type: ipkg
Description: uAnytun is a tiny implementation of SATP the secure anycast tunneling protocol.
  SATP defines a protocol used for communication between any combination of
  unicast and anycast tunnel endpoints.  It has less protocol overhead than
  IPSec in Tunnel mode and allows tunneling of every ETHER TYPE protocol (e.g.
  ethernet, ip, arp ...). SATP directly includes cryptography and message
  authentication based on the methods used by SRTP.  It is intended to deliver
  a generic, scaleable and secure solution for tunneling and relaying of packets
  of any protocol.
  Unlike Anytun which is a full featured implementation uAnytun has no support
  for multiple connections or synchronisation. It is a small single threaded
  implementation intended to act as a client on small platforms.
http://www.anytun.org/
Christian Pointner <equinox@spreadspace.org>
@@

Package: uanytun-nocrypt
Submenu: VPN
Version: 0.3.5-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +kmod-tun
Menu-Depends: 
Provides: 
Build-Variant: nocrypt
Section: net
Category: Network
Title: micro anycast tunneling daemon (no crypt)
Maintainer: Christian Pointner <equinox@spreadspace.org>
Source: uanytun-0.3.5.tar.gz
Type: ipkg
Description: uAnytun is a tiny implementation of SATP the secure anycast tunneling protocol.
  SATP defines a protocol used for communication between any combination of
  unicast and anycast tunnel endpoints.  It has less protocol overhead than
  IPSec in Tunnel mode and allows tunneling of every ETHER TYPE protocol (e.g.
  ethernet, ip, arp ...). SATP directly includes cryptography and message
  authentication based on the methods used by SRTP.  It is intended to deliver
  a generic, scaleable and secure solution for tunneling and relaying of packets
  of any protocol.
  Unlike Anytun which is a full featured implementation uAnytun has no support
  for multiple connections or synchronisation. It is a small single threaded
  implementation intended to act as a client on small platforms.
http://www.anytun.org/
Christian Pointner <equinox@spreadspace.org>
@@


Source-Makefile: feeds/packages/net/prosody/Makefile
Package: prosody
Submenu: Instant Messaging
Version: 0.9.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +luafilesystem +libidn +luaexpat +luasec +libopenssl +libidn +liblua
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: XMPP server
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: prosody-0.9.4.tar.gz
Type: ipkg
Description:   Prosody is an exciting new server for Jabber/XMPP
  written in Lua. It aims to be easy to use, and light
  on resources
http://prosody.im/
Thomas Heil <heil@terminal-consulting.de>
@@


Source-Makefile: feeds/packages/net/tinyproxy/Makefile
Package: tinyproxy
Submenu: Web Servers/Proxies
Version: 1.8.3-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Tinyproxy is a lightweight HTTP and HTTPS proxy
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: tinyproxy-1.8.3.tar.bz2
Type: ipkg
Description: Tinyproxy is a lightweight HTTP and HTTPS proxy
http://tinyproxy.sourceforge.net/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/net/nsd/Makefile
Package: nsd
Submenu: IP Addresses and Names
Version: 4.0.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: net
Category: Network
Title: NSD Name Server Daemon (with SSL support)
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: nsd-4.0.3.tar.gz
Type: ipkg
Description:     NSD is an authoritative only, high performance, simple and open source name
  server.
http://www.nlnetlabs.nl/projects/nsd/
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: nsd-nossl
Submenu: IP Addresses and Names
Version: 4.0.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: NSD Name Server Daemon (without SSL support)
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: nsd-4.0.3.tar.gz
Type: ipkg
Description:     NSD is an authoritative only, high performance, simple and open source name
  server.
http://www.nlnetlabs.nl/projects/nsd/
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: nsd-control
Submenu: IP Addresses and Names
Version: 4.0.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: NSD Name Server Daemon remote control utility
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: nsd-4.0.3.tar.gz
Type: ipkg
Description:     NSD is an authoritative only, high performance, simple and open source name
  server.
http://www.nlnetlabs.nl/projects/nsd/
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@

Package: nsd-control-setup
Submenu: IP Addresses and Names
Version: 4.0.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +openssl-util
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: NSD Name Server Daemon SSL keys setup script
Maintainer: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
Source: nsd-4.0.3.tar.gz
Type: ipkg
Description:     NSD is an authoritative only, high performance, simple and open source name
  server.
http://www.nlnetlabs.nl/projects/nsd/
Vasilis Tsiligiannis <acinonyx@openwrt.gr>
@@


Source-Makefile: feeds/packages/net/vsftpd/Makefile
Package: vsftpd
Submenu: File Transfer
Version: 3.0.2-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Variant: notls
Section: net
Category: Network
Title: A fast and secure FTP server (no TLS)
Maintainer: Cezary Jackiewicz <cezary@eko.one.pl>
Source: vsftpd-3.0.2.tar.gz
Type: ipkg
Description: A fast and secure FTP server (no TLS)
http://vsftpd.beasts.org/
Cezary Jackiewicz <cezary@eko.one.pl>
@@

Package: vsftpd-tls
Submenu: File Transfer
Version: 3.0.2-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: tls
Section: net
Category: Network
Title: A fast and secure FTP server (TLS)
Maintainer: Cezary Jackiewicz <cezary@eko.one.pl>
Source: vsftpd-3.0.2.tar.gz
Type: ipkg
Description: A fast and secure FTP server (TLS)
http://vsftpd.beasts.org/
Cezary Jackiewicz <cezary@eko.one.pl>
@@


Source-Makefile: feeds/packages/net/ocserv/Makefile
Package: ocserv
Submenu: VPN
Version: 0.8.9-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libgnutls +certtool +libncurses +libreadline +OCSERV_PAM:libpam +OCSERV_PROTOBUF:libprotobuf-c
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: OpenConnect VPN server
Maintainer: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
Source: ocserv-0.8.9.tar.xz
Type: ipkg
Description:  OpenConnect server (ocserv) is an SSL VPN server. Its purpose is to be 
 a secure, small, fast and configurable VPN server. It implements the
 OpenConnect SSL VPN protocol, and has also (currently experimental)
 compatibility with clients using the AnyConnect SSL VPN protocol. The
 OpenConnect VPN protocol uses the standard IETF security protocols such
 as TLS 1.2, and Datagram TLS to provide the secure VPN service. 
http://www.infradead.org/ocserv/
Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
@@
Config:
	source "feeds/packages/net/ocserv/Config.in"
@@


Source-Makefile: feeds/packages/net/rtorrent/Makefile
Package: rtorrent
Submenu: BitTorrent
Version: 0.9.4-git--1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcurl +libtorrent +libncursesw +libsigcxx +libpthread
Menu-Depends: 
Provides: 
Build-Variant: norpc
Section: net
Category: Network
Title: BitTorrent client for ncurses
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: rtorrent-0.9.4-git-6a3234eaa79f15857260df31f98711ef24266191.tar.gz
Type: ipkg
Description:  rTorrent is a BitTorrent client for ncurses, using the libtorrent library.
 The client and library is written in C++ with emphasis on speed and
 efficiency, while delivering equivalent features to those found in GUI based
 clients in an ncurses client.
 This package is built without xmlrpc support
http://libtorrent.rakshasa.no/
Peter Wagner <tripolar@gmx.at>
@@

Package: rtorrent-rpc
Submenu: BitTorrent
Version: 0.9.4-git--1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcurl +libtorrent +libncursesw +libsigcxx +libpthread +xmlrpc-c-server
Menu-Depends: 
Provides: 
Build-Variant: rpc
Section: net
Category: Network
Title: BitTorrent client for ncurses (with rpc support)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: rtorrent-0.9.4-git-6a3234eaa79f15857260df31f98711ef24266191.tar.gz
Type: ipkg
Description:  rTorrent is a BitTorrent client for ncurses, using the libtorrent library.
 The client and library is written in C++ with emphasis on speed and
 efficiency, while delivering equivalent features to those found in GUI based
 clients in an ncurses client.
 This package is built with xmlrpc support
http://libtorrent.rakshasa.no/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/net/aria2/Makefile
Package: aria2
Submenu: File Transfer
Version: 1.18.7-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib +ARIA2_METALINK:libxml2 +libstdcpp +ARIA2_OPENSSL:libopenssl +ARIA2_GNUTLS:libgnutls
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: lightweight download utility
Maintainer: Imre Kaloz <kaloz@openwrt.org>
Source: aria2-1.18.7.tar.bz2
Type: ipkg
Description:  aria2 is a lightweight multi-protocol & multi-source command-line download
 utility
http://aria2.sourceforge.net/
Imre Kaloz <kaloz@openwrt.org>
@@
Config:
  source "feeds/packages/net/aria2/Config.in"
@@


Source-Makefile: feeds/packages/net/etherwake/Makefile
Package: etherwake
Version: 1.09-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: WoL client for magic packets via ethernet frames
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: etherwake_1.09.orig.tar.gz
Type: ipkg
Description: 	You can wake up WOL compliant Computers which have been powered down to
	sleep mode or start WOL compliant Computers with a BIOS feature.
	WOL is an abbreviation for Wake-on-LAN. It is a standard that allows you
	to turn on a computer from another location over a network connection.
	ether-wake also supports WOL passwords.
http://ftp.debian.org/debian/pool/main/e/etherwake
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/net/sqm-scripts/Makefile
Package: sqm-scripts
Version: 1.0.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +tc +kmod-sched +kmod-ifb iptables +ip +iptables-mod-ipopt +iptables-mod-conntrack-extra
Menu-Depends: 
Provides: 
Section: net
Category: Base system
Title: SQM Scripts (QoS)
Maintainer: Toke Høiland-Jørgensen <toke@toke.dk>
Source: sqm-scripts-1.0.3-1.tar.xz
Type: ipkg
Description:  A set of scripts that does simple SQM configuration.
Toke Høiland-Jørgensen <toke@toke.dk>
@@

Package: luci-app-sqm
Submenu: 3. Applications
Version: 1.0.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread lua luci-base +sqm-scripts
Menu-Depends: 
Provides: 
Section: luci
Category: LuCI
Title: SQM Scripts - LuCI interface
Maintainer: Toke Høiland-Jørgensen <toke@toke.dk>
Source: sqm-scripts-1.0.3-1.tar.xz
Type: ipkg
Description: 	Control the simple_qos SQM script
Toke Høiland-Jørgensen <toke@toke.dk>
@@


Source-Makefile: feeds/packages/net/ddns-scripts/Makefile
Package: ddns-scripts
Submenu: IP Addresses and Names
Version: 1.0.0-23
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Dynamic DNS Scripts
Maintainer: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Source: 
Type: ipkg
Description: 	A highly configurable set of scripts for doing
	dynamic dns updates
Christian Schoenebeck <christian.schoenebeck@gmail.com>
@@


Source-Makefile: feeds/packages/net/freeradius2/Makefile
Package: freeradius2
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libltdl +libreadline +freeradius2-common
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: A flexible RADIUS server (version 2)
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: A flexible RADIUS server (version 2)
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@
Config:
  source "feeds/packages/net/freeradius2/Config.in"
@@

Package: freeradius2-common
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +FREERADIUS_OPENSSL:libopenssl
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: common files
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: common files
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-democerts
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Demo certificates to test the server
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Demo certificates to test the server
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-chap
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: CHAP module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: CHAP module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-detail
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Detailed accounting module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Detailed accounting module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-eap
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Base EAP module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Base EAP module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-eap-gtc
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2-mod-eap
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: EAP/GTC module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: EAP/GTC module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-eap-md5
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2-mod-eap
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: EAP/MD5 module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: EAP/MD5 module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-eap-mschapv2
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2-mod-eap +freeradius2-mod-mschap
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: EAP/MS-CHAPv2 module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: EAP/MS-CHAPv2 module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-eap-peap
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2-mod-eap @FREERADIUS_OPENSSL
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: EAP/PEAP module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: EAP/PEAP module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-eap-tls
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2-mod-eap @FREERADIUS_OPENSSL
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: EAP/TLS module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: EAP/TLS module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-eap-ttls
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2-mod-eap-tls
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: EAP/TTLS module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: EAP/TTLS module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-exec
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: EXEC module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: EXEC module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-attr-rewrite
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ATTR rewrite module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: ATTR rewrite module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-files
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Module using local files for authorization
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Module using local files for authorization
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-passwd
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Rlm passwd module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Rlm passwd module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-mschap
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: MS-CHAP and MS-CHAPv2 module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: MS-CHAP and MS-CHAPv2 module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-pap
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: PAP module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: PAP module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-preprocess
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Request pre-processing module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Request pre-processing module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-realm
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Realms handling module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Realms handling module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-sql
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Base SQL module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Base SQL module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-sql-pgsql
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2-mod-sql +PACKAGE_freeradius2-mod-sql-pgsql:libpq
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: PostgreSQL module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: PostgreSQL module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-sql-sqlite
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2-mod-sql +PACKAGE_freeradius2-mod-sql-sqlite:libsqlite3
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: SQLite module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: SQLite module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-sqlcounter
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2-mod-sql
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Generic SQL Counter module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Generic SQL Counter module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-sqllog
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: SQL Logging module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: SQL Logging module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-radutmp
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Radius UTMP module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Radius UTMP module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-logintime
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Logintime module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Logintime module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-expr
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: EXPR module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: EXPR module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-attr-filter
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ATTR filter module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: ATTR filter module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-expiration
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Expiration module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Expiration module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-mod-always
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread freeradius2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Always module
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Always module
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@

Package: freeradius2-utils
Submenu: FreeRADIUS (version 2)
Version: 2.2.5-2.3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +freeradius2-common
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Misc. client utilities
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: freeradius-server-2.2.5.tar.bz2
Type: ipkg
Description: Misc. client utilities
http://freeradius.org/
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/net/iodine/Makefile
Package: iodine
Submenu: Firewall Tunnel
Version: 0.7.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +kmod-tun +zlib
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: IP over DNS tunneling client version
Maintainer: Uwe Kleine-König <uwe+openwrt@kleine-koenig.org>
Source: iodine-0.7.0.tar.gz
Type: ipkg
Description:  iodine client version
http://code.kryo.se/iodine/
Uwe Kleine-König <uwe+openwrt@kleine-koenig.org>
@@

Package: iodined
Submenu: Firewall Tunnel
Version: 0.7.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +kmod-tun +zlib
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: IP over DNS tunneling server version
Maintainer: Uwe Kleine-König <uwe+openwrt@kleine-koenig.org>
Source: iodine-0.7.0.tar.gz
Type: ipkg
Description:  iodine server version
http://code.kryo.se/iodine/
Uwe Kleine-König <uwe+openwrt@kleine-koenig.org>
@@


Source-Makefile: feeds/packages/net/mwan3-luci/Makefile
Package: luci-app-mwan3
Submenu: 3. Applications
Version: 1.3-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +mwan3 +luci-mod-admin-full +luci-app-firewall +luci-lib-nixio
Menu-Depends: 
Provides: 
Section: LuCI
Category: LuCI
Title: LuCI support for the MWAN3 multiwan hotplug script
Maintainer: Aedan Renner <chipdankly@gmail.com>
Source: 
Type: ipkg
Description: Hotplug script which makes configuration of multiple WAN interfaces simple and
manageable with loadbalancing/failover support for up to 250 physical or logical
WAN interfaces, connection tracking and an easy to manage traffic ruleset
Aedan Renner <chipdankly@gmail.com>
@@


Source-Makefile: feeds/packages/net/horst/Makefile
Package: horst
Submenu: wireless
Version: 4.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncurses
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Highly Optimized 802.11 Radio Scanning Tool
Maintainer: Bruno Randolf <br1@einfach.org>
Source: horst-4.2-git.tar.gz
Type: ipkg
Description: 	[horst] is a scanning and analysis tool for 802.11 wireless networks
	and especially IBSS (ad-hoc) mode and mesh networks (OLSR).
http://br1.einfach.org/tech/horst/
Bruno Randolf <br1@einfach.org>
@@


Source-Makefile: feeds/packages/net/apache/Makefile
Package: apache
Submenu: Web Servers/Proxies
Version: 2.2.27-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libapr +libaprutil +libpcre +libopenssl +unixodbc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: The Apache Web Server
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: httpd-2.2.27.tar.bz2
Type: ipkg
Description:  The Apache Web Server is a powerful and flexible HTTP/1.1 compliant
 web server.  Originally designed as a replacement for the NCSA HTTP
 Server, it has grown to be the most popular web server on the Internet.
 .
 This package contains the Apache web server and utility programs.
 .
 Take care that you don't include apache at the moment into your image
 please select it only as module because busybox will override
 /usr/sbin/httpd. It'll be solved soon. If you need to include this
 package in the image anyway, remove httpd from busybox
 (Base system --> Configuration --> Networking Utilities --> httpd).
 Also you should take care for the initscripts, apache's httpd isn't
 compatible with the one from busybox, so if you want to use apache
 for running your webif, you'll need to change the parameters in the
 scripts and configure the rest in /etc/httpd.conf.
http://httpd.apache.org/
Thomas Heil <heil@terminal-consulting.de>
@@

Package: apache-icons
Submenu: Web Servers/Proxies
Version: 2.2.27-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread apache
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Icons from Apache
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: httpd-2.2.27.tar.bz2
Type: ipkg
Description:  The Apache Web Server is a powerful and flexible HTTP/1.1 compliant
 web server.  Originally designed as a replacement for the NCSA HTTP
 Server, it has grown to be the most popular web server on the Internet.
 .
 This package contains the icons from Apache.
http://httpd.apache.org/
Thomas Heil <heil@terminal-consulting.de>
@@


Source-Makefile: feeds/packages/net/portmap/Makefile
Package: portmap
Version: 6.0-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libwrap +librpc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: The RPC Portmapper
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: portmap-6.0.tgz
Type: ipkg
Description:  Portmap is a server that converts RPC (Remote Procedure Call) program
 numbers into DARPA protocol port numbers.
http://neil.brown.name/portmap/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/net/ctorrent/Makefile
Package: ctorrent
Submenu: BitTorrent
Version: dnh3.3.2-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +USE_UCLIBCXX:uclibcxx +USE_LIBSTDCXX:libstdcpp +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: net
Category: Network
Title: console-based BitTorrent client (with OpenSSL support)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: ctorrent-dnh3.3.2.tar.gz
Type: ipkg
Description: 	CTorrent is a BitTorrent client written in the C programming language,
	known to be a very robust and mature programming language, which produces
	fast and optimized application.
 This package is built with OpenSSL support.
http://www.rahul.net/dholmes/ctorrent/
Peter Wagner <tripolar@gmx.at>
@@

Package: ctorrent-nossl
Submenu: BitTorrent
Version: dnh3.3.2-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +USE_UCLIBCXX:uclibcxx +USE_LIBSTDCXX:libstdcpp
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: console-based BitTorrent client (with builtin SHA-1)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: ctorrent-dnh3.3.2.tar.gz
Type: ipkg
Description: 	CTorrent is a BitTorrent client written in the C programming language,
	known to be a very robust and mature programming language, which produces
	fast and optimized application.
 This package is built with builtin (Steve Reid's public-domain) SHA-1 support
http://www.rahul.net/dholmes/ctorrent/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/net/memcached/Makefile
Package: memcached
Version: 1.4.20-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libevent +libpthread
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: The high-performance, distributed memory object caching system
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: memcached-1.4.20.tar.gz
Type: ipkg
Description:   Free and open source, high-performance, distributed memory object caching system
http://memcached.org/
Thomas Heil <heil@terminal-consulting.de>
@@


Source-Makefile: feeds/packages/net/mdnsresponder/Makefile
Package: mdns-utils
Submenu: IP Addresses and Names
Version: 544-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +mdnsd
Menu-Depends: 
Provides: 
Build-Depends: libcap
Section: net
Category: Network
Title: mDNS client utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: mDNSResponder-544.tar.gz
Type: ipkg
Description:   Bonjour, also known as zero-configuration networking, enables
  automatic discovery of computers, devices, and services on
  IP networks.
 .
 This package contains mDNS client utilities:
 - dns-sd
 - mDNSClient
 - mDNSIdentify
 - mDNSNetMonitor
 - mDNSProxyResponder
 - mDNSResponder
http://developer.apple.com/networking/bonjour/
Steven Barth <cyrus@openwrt.org>
@@

Package: mdnsd
Submenu: IP Addresses and Names
Version: 544-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Depends: libcap
Section: net
Category: Network
Title: mDNS server daemon
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: mDNSResponder-544.tar.gz
Type: ipkg
Description:   Bonjour, also known as zero-configuration networking, enables
  automatic discovery of computers, devices, and services on
  IP networks.
 .
 This package contains the mDNS server daemon.
http://developer.apple.com/networking/bonjour/
Steven Barth <cyrus@openwrt.org>
@@

Package: mdnsresponder
Submenu: IP Addresses and Names
Version: 544-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +mdns-utils +mdnsd
Menu-Depends: 
Provides: 
Build-Depends: libcap
Section: net
Category: Network
Title: mDNS suite (meta)
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: mDNSResponder-544.tar.gz
Type: ipkg
Description:   Bonjour, also known as zero-configuration networking, enables
  automatic discovery of computers, devices, and services on
  IP networks.
 .
 This meta package contains only dependencies on other packages.
http://developer.apple.com/networking/bonjour/
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/net/knot/Makefile
Package: knot-libknot
Submenu: IP Addresses and Names
Version: 1.5.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +liburcu
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Knot DNS (library)
Maintainer: Daniel Salzman <daniel.salzman@nic.cz>
Source: knot-1.5.3.tar.gz
Type: ipkg
Description: 	Knot DNS library.
https://www.knot-dns.cz
Daniel Salzman <daniel.salzman@nic.cz>
@@

Package: knot
Submenu: IP Addresses and Names
Version: 1.5.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +liburcu +knot-libknot
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Knot DNS (server)
Maintainer: Daniel Salzman <daniel.salzman@nic.cz>
Source: knot-1.5.3.tar.gz
Type: ipkg
Description: 	High-performance authoritative-only DNS server.
https://www.knot-dns.cz
Daniel Salzman <daniel.salzman@nic.cz>
@@

Package: knot-utils
Submenu: IP Addresses and Names
Version: 1.5.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +liburcu +knot-libknot
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Knot DNS (utils)
Maintainer: Daniel Salzman <daniel.salzman@nic.cz>
Source: knot-1.5.3.tar.gz
Type: ipkg
Description: 	DNS utilities: kdig, khost, knsupdate and knsec3hash.
https://www.knot-dns.cz
Daniel Salzman <daniel.salzman@nic.cz>
@@

Package: knot-tests
Submenu: IP Addresses and Names
Version: 1.5.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +liburcu +knot-libknot
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Knot DNS (tests)
Maintainer: Daniel Salzman <daniel.salzman@nic.cz>
Source: knot-1.5.3.tar.gz
Type: ipkg
Description: 	Unit tests for Knot DNS server.
	Usage: /usr/share/knot/runtests.sh
https://www.knot-dns.cz
Daniel Salzman <daniel.salzman@nic.cz>
@@


Source-Makefile: feeds/packages/net/openconnect/Makefile
Package: openconnect
Submenu: VPN
Version: 7.03-3
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libxml2 +kmod-tun +resolveip +OPENCONNECT_OPENSSL:libopenssl +OPENCONNECT_GNUTLS:libgnutls
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: OpenConnect VPN client (Cisco AnyConnect compatible)
Maintainer: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
Source: openconnect-7.03.tar.gz
Type: ipkg
Description: 	A VPN client compatible with Cisco's AnyConnect SSL VPN and ocserv.

        OpenConnect is a client that follows the Cisco's AnyConnect SSL VPN protocol,
        which is supported by IOS 12.4(9)T or later on Cisco SR500, 870, 880, 1800, 
        2800, 3800, 7200 Series and Cisco 7301 Routers, as well as the OpenConnect
        VPN server.
http://www.infradead.org/openconnect/
Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
@@
Config:
	source "feeds/packages/net/openconnect/Config.in"
@@


Source-Makefile: feeds/packages/net/strongswan/Makefile
Package: strongswan
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +ip +kmod-crypto-authenc +kmod-ipsec +kmod-ipsec4 +kmod-ipsec6 +kmod-ipt-ipsec +iptables-mod-ipsec
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description:  StrongSwan is an OpenSource IPsec implementation for the Linux operating system.
 This package contains shared libraries and scripts.
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@
Config:
  source "feeds/packages/net/strongswan/Config.in"
@@

Package: strongswan-default
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +strongswan-charon +strongswan-mod-aes +strongswan-mod-attr +strongswan-mod-constraints +strongswan-mod-des +strongswan-mod-dnskey +strongswan-mod-fips-prf +strongswan-mod-gmp +strongswan-mod-hmac +strongswan-mod-kernel-netlink +strongswan-mod-md5 +strongswan-mod-nonce +strongswan-mod-pem +strongswan-mod-pgp +strongswan-mod-pkcs1 +strongswan-mod-pubkey +strongswan-mod-random +strongswan-mod-resolve +strongswan-mod-revocation +strongswan-mod-sha1 +strongswan-mod-sha2 +strongswan-mod-socket-default +strongswan-mod-stroke +strongswan-mod-updown +strongswan-mod-x509 +strongswan-mod-xauth-generic +strongswan-mod-xcbc +strongswan-utils
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan (default)
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description:  StrongSwan is an OpenSource IPsec implementation for the Linux operating system.
 This meta-package contains only dependencies to match upstream defaults.
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-full
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +strongswan-charon +strongswan-mod-addrblock +strongswan-mod-aes +strongswan-mod-af-alg +strongswan-mod-agent +strongswan-mod-attr +strongswan-mod-attr-sql +strongswan-mod-blowfish +strongswan-mod-ccm +strongswan-mod-cmac +strongswan-mod-constraints +strongswan-mod-coupling +strongswan-mod-ctr +strongswan-mod-curl +strongswan-mod-des +strongswan-mod-dhcp +strongswan-mod-dnskey +strongswan-mod-duplicheck +strongswan-mod-eap-identity +strongswan-mod-eap-md5 +strongswan-mod-eap-mschapv2 +strongswan-mod-eap-radius +strongswan-mod-farp +strongswan-mod-fips-prf +strongswan-mod-gcm +strongswan-mod-gcrypt +strongswan-mod-gmp +strongswan-mod-ha +strongswan-mod-hmac +strongswan-mod-kernel-netlink +strongswan-mod-ldap +strongswan-mod-led +strongswan-mod-load-tester +strongswan-mod-nonce +strongswan-mod-md4 +strongswan-mod-md5 +strongswan-mod-mysql +strongswan-mod-openssl +strongswan-mod-pem +strongswan-mod-pgp +strongswan-mod-pkcs1 +strongswan-mod-pkcs8 +strongswan-mod-pkcs11 +strongswan-mod-pubkey +strongswan-mod-random +strongswan-mod-resolve +strongswan-mod-revocation +strongswan-mod-sha1 +strongswan-mod-sha2 +strongswan-mod-smp +strongswan-mod-socket-default +strongswan-mod-sql +strongswan-mod-sqlite +strongswan-mod-stroke +strongswan-mod-test-vectors +strongswan-mod-uci +strongswan-mod-unity +strongswan-mod-updown +strongswan-mod-whitelist +strongswan-mod-x509 +strongswan-mod-xauth-eap +strongswan-mod-xauth-generic +strongswan-mod-xcbc +strongswan-utils @DEVEL
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan (full)
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description:  StrongSwan is an OpenSource IPsec implementation for the Linux operating system.
 This meta-package contains dependencies for all of the strongswan plugins
 except kernel-libipsec,
 socket-dynamic and which are ommitted in favor of the kernel-netlink and
 socket-default plugins.
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-minimal
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +strongswan-charon +strongswan-mod-aes +strongswan-mod-gmp +strongswan-mod-hmac +strongswan-mod-kernel-netlink +strongswan-mod-nonce +strongswan-mod-pubkey +strongswan-mod-random +strongswan-mod-sha1 +strongswan-mod-socket-default +strongswan-mod-stroke +strongswan-mod-updown +strongswan-mod-x509 +strongswan-mod-xcbc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan (minimal)
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description:  StrongSwan is an OpenSource IPsec implementation for the Linux operating system.
 This meta-package contains only dependencies for a minimal IKEv2 setup.
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-charon
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan IKEv1/IKEv2 keying daemon
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description:  StrongSwan is an OpenSource IPsec implementation for the Linux operating system.
 This package contains charon, an IKEv2 keying daemon.
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-utils
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan utilities
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description:  StrongSwan is an OpenSource IPsec implementation for the Linux operating system.
 This package contains the pki & scepclient utilities.
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-addrblock
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan RFC 3779 address block constraint support plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan RFC 3779 address block constraint support plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-aes
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan AES crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan AES crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-af-alg
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +kmod-crypto-user
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan AF_ALG crypto interface to Linux Crypto API plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan AF_ALG crypto interface to Linux Crypto API plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-agent
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan SSH agent signing plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan SSH agent signing plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-attr
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan file based config plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan file based config plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-attr-sql
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +strongswan-charon
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan SQL based config plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan SQL based config plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-blowfish
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan Blowfish crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan Blowfish crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-ccm
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan CCM AEAD wrapper crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan CCM AEAD wrapper crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-cmac
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan CMAC crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan CMAC crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-constraints
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan advanced X509 constraint checking plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan advanced X509 constraint checking plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-coupling
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan IKEv2 plugin to couple peer certificates permanently to authentication plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan IKEv2 plugin to couple peer certificates permanently to authentication plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-ctr
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan Counter Mode wrapper crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan Counter Mode wrapper crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-curl
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +PACKAGE_strongswan-mod-curl:libcurl
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan cURL fetcher plugin plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan cURL fetcher plugin plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-des
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan DES crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan DES crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-dhcp
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan DHCP based attribute provider plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan DHCP based attribute provider plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-dnskey
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan DNS RR key decoding plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan DNS RR key decoding plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-duplicheck
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan advanced duplicate checking plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan advanced duplicate checking plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-eap-identity
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan EAP identity helper plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan EAP identity helper plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-eap-md5
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan EAP MD5 (CHAP) EAP auth plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan EAP MD5 (CHAP) EAP auth plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-eap-mschapv2
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +strongswan-mod-md4 +strongswan-mod-des
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan EAP MS-CHAPv2 EAP auth plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan EAP MS-CHAPv2 EAP auth plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-eap-radius
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan EAP RADIUS auth plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan EAP RADIUS auth plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-farp
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan fake arp respsonses plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan fake arp respsonses plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-fips-prf
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +strongswan-mod-sha1
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan FIPS PRF crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan FIPS PRF crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-gcm
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan GCM AEAD wrapper crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan GCM AEAD wrapper crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-gcrypt
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +PACKAGE_strongswan-mod-gcrypt:libgcrypt
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan libgcrypt plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan libgcrypt plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-gmp
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +PACKAGE_strongswan-mod-gmp:libgmp
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan libgmp plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan libgmp plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-ha
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan high availability cluster plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan high availability cluster plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-hmac
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan HMAC crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan HMAC crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-kernel-libipsec
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan libipsec kernel interface plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan libipsec kernel interface plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-kernel-netlink
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan netlink kernel interface plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan netlink kernel interface plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-ldap
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +PACKAGE_strongswan-mod-ldap:libopenldap
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan LDAP plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan LDAP plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-led
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan LED blink on IKE activity plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan LED blink on IKE activity plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-load-tester
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan load testing plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan load testing plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-nonce
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan nonce genereation plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan nonce genereation plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-md4
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan MD4 crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan MD4 crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-md5
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan MD5 crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan MD5 crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-mysql
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +strongswan-mod-sql +PACKAGE_strongswan-mod-mysql:libmysqlclient-r
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan MySQL database interface plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan MySQL database interface plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-openssl
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +PACKAGE_strongswan-mod-openssl:libopenssl
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan OpenSSL crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan OpenSSL crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-pem
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan PEM decoding plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan PEM decoding plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-pgp
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan PGP key decoding plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan PGP key decoding plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-pkcs1
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan PKCS1 key decoding plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan PKCS1 key decoding plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-pkcs8
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan PKCS8 key decoding plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan PKCS8 key decoding plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-pkcs11
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan PKCS11 key decoding plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan PKCS11 key decoding plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-pubkey
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan raw public key plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan raw public key plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-random
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan RNG plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan RNG plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-resolve
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan DNS resolver plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan DNS resolver plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-revocation
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan X509 CRL/OCSP revocation plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan X509 CRL/OCSP revocation plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-sha1
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan SHA1 crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan SHA1 crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-sha2
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan SHA2 crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan SHA2 crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-smp
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +PACKAGE_strongswan-mod-smp:libxml2
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan SMP configuration and control interface plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan SMP configuration and control interface plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-socket-default
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan default socket implementation for charon plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan default socket implementation for charon plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-socket-dynamic
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan dynamic socket implementation for charon plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan dynamic socket implementation for charon plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-sql
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan SQL database interface plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan SQL database interface plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-sqlite
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +strongswan-mod-sql +PACKAGE_strongswan-mod-sqlite:libsqlite3
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan SQLite database interface plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan SQLite database interface plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-stroke
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +strongswan-utils
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan Stroke plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan Stroke plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-test-vectors
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan crypto test vectors plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan crypto test vectors plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-uci
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan +PACKAGE_strongswan-mod-uci:libuci
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan UCI config interface plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan UCI config interface plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-unity
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan Cisco Unity extension plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan Cisco Unity extension plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-updown
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan updown firewall plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan updown firewall plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-whitelist
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan peer identity whitelisting plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan peer identity whitelisting plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-x509
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan x509 certificate plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan x509 certificate plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-xauth-eap
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan EAP XAuth backend plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan EAP XAuth backend plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-xauth-generic
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan generic XAuth backend plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan generic XAuth backend plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: strongswan-mod-xcbc
Submenu: VPN
Version: 5.3.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +strongswan
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: StrongSwan xcbc crypto plugin
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: strongswan-5.3.2.tar.bz2
Type: ipkg
Description: StrongSwan xcbc crypto plugin
http://www.strongswan.org/
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/net/luci-proto-openconnect/Makefile
Package: luci-proto-openconnect
Submenu: 6. Protocols
Version: 1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +luci-mod-admin-full +luci-lib-nixio +openconnect
Menu-Depends: 
Provides: 
Section: luci
Category: LuCI
Title: OpenConnect VPN protocol configuration
Maintainer: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
Source: 
Type: ipkg
Description: 	openconnect web module for LuCi web interface
Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
@@


Source-Makefile: feeds/packages/net/shadowsocks-client/Makefile
Package: shadowsocks-client
Submenu: Web Servers/Proxies
Version: 0.5-d8ef02715f40de0fb7ba0f7267d3f8260f38ba80
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: shadowsocks client for router
Maintainer: Zhao, Gang <gang.zhao.42@gmail.com>
Source: shadowsocks-client-0.5-d8ef02715f40de0fb7ba0f7267d3f8260f38ba80.tar.gz
Type: ipkg
Description: shadowsocks client for router
https://github.com/zhao-gang/shadowsocks-tiny
Zhao, Gang <gang.zhao.42@gmail.com>
@@


Source-Makefile: feeds/packages/net/ethtool/Makefile
Package: ethtool
Version: 3.14-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Display or change ethernet card settings
Maintainer: Matthias Schiffer <mschiffer@universe-factory.net>
Source: ethtool-3.14.tar.xz
Type: ipkg
Description:  ethtool is a small utility for examining and tuning your ethernet-based
 network interface
http://www.kernel.org/pub/software/network/ethtool/
Matthias Schiffer <mschiffer@universe-factory.net>
@@


Source-Makefile: feeds/packages/net/udpxy/Makefile
Package: udpxy
Version: 1.0.23-9-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Convert UDP IPTV streams into HTTP streams
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: udpxy.1.0.23-9-prod.tar.gz
Type: ipkg
Description: 	udproxy makes it possible to convert UDP IPTV streams into HTTP
	streams which can be viewed even over WLANs. HTTP streams do
	not generate huge amounts of multicast traffic, so a sd stream
	only takes about 300k. Interesting for peoply who have IPTV at
	home and do not want to rent multiple decoders from their
	provider but just use their own streaming client (for example
	popcornhour/mediatomb/vlc).
http://www.udpxy.com/index-en.html
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/net/fastd/Makefile
Package: fastd
Submenu: VPN
Version: 14-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +kmod-tun +librt +libpthread
Menu-Depends: 
Provides: 
Build-Depends: nacl libuecc
Section: net
Category: Network
Title: Fast and Secure Tunneling Daemon
Maintainer: Matthias Schiffer <mschiffer@universe-factory.net>
Source: fastd-14.tar.xz
Type: ipkg
Description:  Fast and secure tunneling daemon, which is optimized on small code size and few dependencies
https://projects.universe-factory.net/projects/fastd
Matthias Schiffer <mschiffer@universe-factory.net>
@@
Config:
  source "feeds/packages/net/fastd/Config.in"
@@


Source-Makefile: feeds/packages/net/openssh/Makefile
Package: openssh-client
Submenu: SSH
Version: 6.6p1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +zlib +SSP_SUPPORT:libssp
Menu-Depends: 
Provides: 
Build-Variant: without-pam
Build-Depends: libopenssl
Section: net
Category: Network
Title: OpenSSH client
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: openssh-6.6p1.tar.gz
Type: ipkg
Description: OpenSSH client.
http://www.openssh.com/
Peter Wagner <tripolar@gmx.at>
@@

Package: openssh-moduli
Submenu: SSH
Version: 6.6p1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +zlib +SSP_SUPPORT:libssp +openssh-keygen
Menu-Depends: 
Provides: 
Build-Variant: without-pam
Build-Depends: libopenssl
Section: net
Category: Network
Title: OpenSSH moduli file
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: openssh-6.6p1.tar.gz
Type: ipkg
Description: OpenSSH server moduli file.
http://www.openssh.com/
Peter Wagner <tripolar@gmx.at>
@@

Package: openssh-client-utils
Submenu: SSH
Version: 6.6p1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +zlib +SSP_SUPPORT:libssp +openssh-client +openssh-keygen
Menu-Depends: 
Provides: 
Build-Variant: without-pam
Build-Depends: libopenssl
Section: net
Category: Network
Title: OpenSSH client utilities
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: openssh-6.6p1.tar.gz
Type: ipkg
Description: OpenSSH client utilities.
http://www.openssh.com/
Peter Wagner <tripolar@gmx.at>
@@

Package: openssh-keygen
Submenu: SSH
Version: 6.6p1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +zlib +SSP_SUPPORT:libssp
Menu-Depends: 
Provides: 
Build-Variant: without-pam
Build-Depends: libopenssl
Section: net
Category: Network
Title: OpenSSH keygen
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: openssh-6.6p1.tar.gz
Type: ipkg
Description: OpenSSH keygen.
http://www.openssh.com/
Peter Wagner <tripolar@gmx.at>
@@

Package: openssh-server
Submenu: SSH
Version: 6.6p1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +zlib +SSP_SUPPORT:libssp +openssh-keygen
Menu-Depends: 
Provides: 
Build-Variant: without-pam
Build-Depends: libopenssl
Section: net
Category: Network
Title: OpenSSH server
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: openssh-6.6p1.tar.gz
Type: ipkg
Description: OpenSSH server.
http://www.openssh.com/
Peter Wagner <tripolar@gmx.at>
@@

Package: openssh-server-pam
Submenu: SSH
Version: 6.6p1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +zlib +SSP_SUPPORT:libssp +libpthread +openssh-keygen +libpam
Menu-Depends: 
Provides: 
Build-Variant: with-pam
Build-Depends: libopenssl
Section: net
Category: Network
Title: OpenSSH server (with PAM support)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: openssh-6.6p1.tar.gz
Type: ipkg
Description: OpenSSH server (with PAM support).
http://www.openssh.com/
Peter Wagner <tripolar@gmx.at>
@@

Package: openssh-sftp-client
Submenu: SSH
Version: 6.6p1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +zlib +SSP_SUPPORT:libssp
Menu-Depends: 
Provides: 
Build-Variant: without-pam
Build-Depends: libopenssl
Section: net
Category: Network
Title: OpenSSH SFTP client
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: openssh-6.6p1.tar.gz
Type: ipkg
Description: OpenSSH SFTP client.
http://www.openssh.com/
Peter Wagner <tripolar@gmx.at>
@@

Package: openssh-sftp-server
Submenu: SSH
Version: 6.6p1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +SSP_SUPPORT:libssp
Menu-Depends: 
Provides: 
Build-Variant: without-pam
Build-Depends: libopenssl
Section: net
Category: Network
Title: OpenSSH SFTP server
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: openssh-6.6p1.tar.gz
Type: ipkg
Description: OpenSSH SFTP server.
http://www.openssh.com/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/net/fwknop/Makefile
Package: fwknopd
Submenu: Firewall
Version: 2.6.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +iptables +libfko +libpcap
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: FireWall KNock OPerator Daemon
Maintainer: Jonathan Bennett <JBennett@incomsystems.biz>
Source: fwknop-2.6.2.tar.bz2
Type: ipkg
Description:     Fwknop implements an authorization scheme known as Single Packet Authorization
  (SPA) for Linux systems running iptables.  This mechanism requires only a
  single encrypted and non-replayed packet to communicate various pieces of
  information including desired access through an iptables policy. The main
  application of this program is to use iptables in a default-drop stance to
  protect services such as SSH with an additional layer of security in order to
  make the exploitation of vulnerabilities (both 0-day and unpatched code) much
  more difficult.
  This package contains the fwknop daemon.
http://www.cipherdyne.org/fwknop/
Jonathan Bennett <JBennett@incomsystems.biz>
@@

Package: fwknop
Submenu: Firewall
Version: 2.6.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libfko
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: FireWall KNock OPerator Client
Maintainer: Jonathan Bennett <JBennett@incomsystems.biz>
Source: fwknop-2.6.2.tar.bz2
Type: ipkg
Description:     Fwknop implements an authorization scheme known as Single Packet Authorization
  (SPA) for Linux systems running iptables.  This mechanism requires only a
  single encrypted and non-replayed packet to communicate various pieces of
  information including desired access through an iptables policy. The main
  application of this program is to use iptables in a default-drop stance to
  protect services such as SSH with an additional layer of security in order to
  make the exploitation of vulnerabilities (both 0-day and unpatched code) much
  more difficult.
  This package contains the fwknop client.
http://www.cipherdyne.org/fwknop/
Jonathan Bennett <JBennett@incomsystems.biz>
@@

Package: libfko
Submenu: Firewall
Version: 2.6.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: FireWall KNock OPerator Library
Maintainer: Jonathan Bennett <JBennett@incomsystems.biz>
Source: fwknop-2.6.2.tar.bz2
Type: ipkg
Description:     Fwknop implements an authorization scheme known as Single Packet Authorization
  (SPA) for Linux systems running iptables.  This mechanism requires only a
  single encrypted and non-replayed packet to communicate various pieces of
  information including desired access through an iptables policy. The main
  application of this program is to use iptables in a default-drop stance to
  protect services such as SSH with an additional layer of security in order to
  make the exploitation of vulnerabilities (both 0-day and unpatched code) much
  more difficult.
  This package contains the libfko shared library.
http://www.cipherdyne.org/fwknop/
Jonathan Bennett <JBennett@incomsystems.biz>
@@


Source-Makefile: feeds/packages/net/nginx/Makefile
Package: nginx
Menu: 1
Submenu: Web Servers/Proxies
Version: 1.4.7-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +NGINX_PCRE:libpcre +(NGINX_SSL||NGINX_HTTP_CACHE||NGINX_HTTP_AUTH_BASIC):libopenssl +NGINX_HTTP_GZIP:zlib +libpthread +NGINX_LUA:liblua
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Nginx web server
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: nginx-1.4.7.tar.gz
Type: ipkg
Description:  nginx is an HTTP and reverse proxy server, as well as a mail proxy server,
 written by Igor Sysoev.
http://nginx.org/
Thomas Heil <heil@terminal-consulting.de>
@@
Config:
  source "feeds/packages/net/nginx/Config.in"
@@

Package: nginx-naxsi
Menu: 1
Submenu: Web Servers/Proxies
Version: 1.4.7-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread nginx @NGINX_NAXSI
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: nginx-naxsi
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: nginx-1.4.7.tar.gz
Type: ipkg
Description:         NGINX WAF NAXSI
http://nginx.org/
Thomas Heil <heil@terminal-consulting.de>
@@

Package: nginx-proxyprotocol
Menu: 1
Submenu: Web Servers/Proxies
Version: 1.4.7-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread nginx @NGINX_PROXYPROTOCOL
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: nginx 
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: nginx-1.4.7.tar.gz
Type: ipkg
Description:         IMPLEMENT Proxy Protocol
http://nginx.org/
Thomas Heil <heil@terminal-consulting.de>
@@

Package: nginx-syslog
Menu: 1
Submenu: Web Servers/Proxies
Version: 1.4.7-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread nginx @NGINX_SYSLOG
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: nginx-syslog
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: nginx-1.4.7.tar.gz
Type: ipkg
Description:         IMPLEMENT Syslog Protocol
http://nginx.org/
Thomas Heil <heil@terminal-consulting.de>
@@


Source-Makefile: feeds/packages/net/polipo/Makefile
Package: polipo
Submenu: Web Servers/Proxies
Version: 1.1.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: A caching web proxy
Maintainer: Gabriel Kerneis <gabriel@kerneis.info>
Source: polipo-1.1.1.tar.gz
Type: ipkg
Description:  Polipo is a small and fast caching web proxy (a web cache, an HTTP proxy,
 a proxy server). While Polipo was designed to be used by one person or a
 small group of people, there is nothing that prevents it from being used
 by a larger group.
http://www.pps.univ-paris-diderot.fr/~jch/software/polipo/
Gabriel Kerneis <gabriel@kerneis.info>
@@


Source-Makefile: feeds/packages/net/transmission/Makefile
Package: transmission-daemon
Menu: 1
Submenu: BitTorrent
Version: 2.84-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcurl +libopenssl +libpthread +libevent2 +librt
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: A free, lightweight BitTorrent client
Maintainer: Cezary Jackiewicz <cezary@eko.one.pl>
Source: transmission-2.84.tar.xz
Type: ipkg
Description:  Transmission is a simple BitTorrent client.
 It features a very simple, intuitive interface
 on top on an efficient, cross-platform back-end.
 This package contains the daemon itself.
http://www.transmissionbt.com
Cezary Jackiewicz <cezary@eko.one.pl>
@@

Package: transmission-cli
Submenu: BitTorrent
Version: 2.84-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread transmission-daemon
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: A free, lightweight BitTorrent client
Maintainer: Cezary Jackiewicz <cezary@eko.one.pl>
Source: transmission-2.84.tar.xz
Type: ipkg
Description:  CLI utilities for transmission.
http://www.transmissionbt.com
Cezary Jackiewicz <cezary@eko.one.pl>
@@

Package: transmission-remote
Submenu: BitTorrent
Version: 2.84-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcurl +libopenssl +libpthread +libevent2 +librt
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: A free, lightweight BitTorrent client
Maintainer: Cezary Jackiewicz <cezary@eko.one.pl>
Source: transmission-2.84.tar.xz
Type: ipkg
Description:  CLI remote interface for transmission.
http://www.transmissionbt.com
Cezary Jackiewicz <cezary@eko.one.pl>
@@

Package: transmission-web
Submenu: BitTorrent
Version: 2.84-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread transmission-daemon
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: A free, lightweight BitTorrent client
Maintainer: Cezary Jackiewicz <cezary@eko.one.pl>
Source: transmission-2.84.tar.xz
Type: ipkg
Description:  Webinterface resources for transmission.
http://www.transmissionbt.com
Cezary Jackiewicz <cezary@eko.one.pl>
@@


Source-Makefile: feeds/packages/net/tcpproxy/Makefile
Package: tcpproxy
Submenu: Routing and Redirection
Version: 1.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: IPv4/IPv6 tcp connection proxy
Maintainer: Christian Pointner <equinox@spreadspace.org>
Source: tcpproxy-1.1.tar.gz
Type: ipkg
Description: tcpproxy is a simple tcp connection proxy which combines the features of rinetd and 6tunnel.
 tcpproxy supports IPv4 and IPv6 and also supports connections from IPv6 to IPv4 endpoints and vice versa.
http://www.spreadspace.org/tcpproxy/
Christian Pointner <equinox@spreadspace.org>
@@


Source-Makefile: feeds/packages/net/nfs-kernel-server/Makefile
Package: nfs-kernel-server
Submenu: Filesystem
Version: 1.3.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libwrap +libblkid +libuuid +librpc +kmod-fs-nfsd +kmod-fs-nfs +portmap
Menu-Depends: 
Provides: 
Build-Depends: nfs-kernel-server/host
Build-Types: host
Section: net
Category: Network
Title: Kernel NFS server support
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: nfs-utils-1.3.0.tar.bz2
Type: ipkg
Description:   Kernel NFS server support
http://nfs.sourceforge.net/
Peter Wagner <tripolar@gmx.at>
@@

Package: nfs-kernel-server-utils
Submenu: Filesystem
Version: 1.3.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread nfs-kernel-server
Menu-Depends: 
Provides: 
Build-Depends: nfs-kernel-server/host
Build-Types: host
Section: net
Category: Network
Title: NFS server utils
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: nfs-utils-1.3.0.tar.bz2
Type: ipkg
Description:   NFS server utils
http://nfs.sourceforge.net/
Peter Wagner <tripolar@gmx.at>
@@

Package: nfs-utils
Submenu: Filesystem
Version: 1.3.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libwrap +libblkid +libuuid +librpc +libevent +USE_UCLIBC:librpc
Menu-Depends: 
Provides: 
Build-Depends: nfs-kernel-server/host
Build-Types: host
Section: utils
Category: Utilities
Title: updated mount utility (includes nfs4)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: nfs-utils-1.3.0.tar.bz2
Type: ipkg
Description:   Updated mount.nfs command - allows mounting nfs4 volumes
http://nfs.sourceforge.net/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/net/xl2tpd/Makefile
Package: xl2tpd
Submenu: VPN
Version: 1.3.6-5619e1771048e74b729804e8602f409af0f3faea
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +ppp-mod-pppol2tp +ip +resolveip
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: An L2TP (Layer 2 Tunneling Protocol) daemon
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: xl2tpd-1.3.6.tar.gz
Type: ipkg
Description: l2tpd is the open source implementation of the L2TP tunneling protocol (RFC2661).
It does implement both LAC and LNS role in a L2TP networking architecture. The
main goal of this protocol is to tunnel PPP frame trough an IP network.
http://www.xelerance.com/software/xl2tpd/
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/net/wshaper/Makefile
Package: wshaper
Version: 1.1a-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +kmod-sched +tc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: wshaper
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: 
Type: ipkg
Description:  A script to do traffing shaping with the HTB algorithm.
 Wshaper attempts to:
 * Maintain low latency for interfactive traffic at all times
 * Allow 'surfing' at reasonable speeds while up or downloading
 * Make sure uploads don't harm downloads, and the other way around
http://lartc.org/wondershaper/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/net/tgt/Makefile
Package: tgt
Version: 1.0.48-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +libaio +@KERNEL_AIO +@KERNEL_DIRECT_IO
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: userspace iSCSI target
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: tgt-1.0.48-22d9567f39e5eb8a794ce2cb5a2190abdbecaa1f.tar.gz
Type: ipkg
Description: Linux SCSI target framework (tgt) aims to simplify various SCSI target driver (iSCSI, Fibre Channel, SRP, etc) creation and maintenance.
Key goals of the project are the clean integration into the scsi-mid layer and implementing a great portion of tgt in user space.
Tgt consists of kernel-space and user-space code. The kernel-space component is included in upstream as of 2.6.20.
Note that if you are interested in only iSCSI (probably you are), you need only the user-space code (any kernel version is fine).
http://stgt.sourceforge.net/
Maxim Storchak <m.storchak@gmail.com>
@@


Source-Makefile: feeds/packages/net/mtr/Makefile
Package: mtr
Version: 0.85-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncurses
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Full screen ncurses traceroute tool
Maintainer: Jonathan McCrohan <jmccrohan@gmail.com>
Source: mtr-0.85.tar.gz
Type: ipkg
Description: 	mtr combines the functionality of the 'traceroute' and 'ping' programs
	in a single network diagnostic tool.
	As mtr starts, it investigates the network connection between the host
	mtr runs on and a user-specified destination host. After it
	determines the address of each network hop between the machines,
	it sends a sequence ICMP ECHO requests to each one to determine the
	quality of the link to each machine. As it does this, it prints
	running statistics about each machine.
http://www.bitwizard.nl/mtr/
Jonathan McCrohan <jmccrohan@gmail.com>
@@


Source-Makefile: feeds/packages/net/xinetd/Makefile
Package: xinetd
Version: 2.3.15-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: A powerful and secure super-server
Maintainer: Jonathan McCrohan <jmccrohan@gmail.com>
Source: xinetd-2.3.15.tar.gz
Type: ipkg
Description: 	xinetd has access control mechanisms, extensive logging capabilities,
	the ability to make services available based on time, can place limits
	on the number of servers that can be started, and has deployable
	defence mechanisms to protect against port scanners, among other
	things.
http://www.xinetd.org/
Jonathan McCrohan <jmccrohan@gmail.com>
@@


Source-Makefile: feeds/packages/net/haproxy/Makefile
Package: haproxy-nossl
Submenu: Web Servers/Proxies
Version: 1.5.14-00
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpcre +libltdl +zlib +libpthread
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: The Reliable, High Performance TCP/HTTP Load Balancer
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: haproxy-1.5.14.tar.gz
Type: ipkg
Description:  Open source Reliable, High Performance TCP/HTTP Load Balancer.
 This package is built without SSL support.
http://haproxy.1wt.eu/
Thomas Heil <heil@terminal-consulting.de>
@@

Package: haproxy
Submenu: Web Servers/Proxies
Version: 1.5.14-00
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpcre +libltdl +zlib +libpthread +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: net
Category: Network
Title: The Reliable, High Performance TCP/HTTP Load Balancer
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: haproxy-1.5.14.tar.gz
Type: ipkg
Description:  Open source Reliable, High Performance TCP/HTTP Load Balancer.
 This package is built with SSL support.
http://haproxy.1wt.eu/
Thomas Heil <heil@terminal-consulting.de>
@@

Package: halog
Menu: 1
Submenu: Web Servers/Proxies
Version: 1.5.14-00
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread haproxy
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: The Reliable, High Performance TCP/HTTP Load Balancer halog
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: haproxy-1.5.14.tar.gz
Type: ipkg
Description: 	HAProxy Log Analyzer
http://haproxy.1wt.eu/
Thomas Heil <heil@terminal-consulting.de>
@@


Source-Makefile: feeds/packages/net/wavemon/Makefile
Package: wavemon
Submenu: wireless
Version: 0.7.6-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncurses +libpthread
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: N-curses based wireless network devices monitor
Maintainer: Jonathan McCrohan <jmccrohan@gmail.com>
Source: wavemon-0.7.6.tar.bz2
Type: ipkg
Description:   wavemon is a ncurses-based monitoring application for wireless network
  devices. It currently works under Linux with devices that are supported
  by the wireless extensions by Jean Tourrilhes (included in Kernel 2.4
  and higher), e.g. the Lucent Orinoco cards.
http://eden-feed.erg.abdn.ac.uk/wavemon/
Jonathan McCrohan <jmccrohan@gmail.com>
@@


Source-Makefile: feeds/packages/net/wget/Makefile
Package: wget
Submenu: File Transfer
Version: 1.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpcre +libopenssl +librt
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: net
Category: Network
Title: Non-interactive network downloader (with SSL support)
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: wget-1.16.tar.xz
Type: ipkg
Description:  Wget is a network utility to retrieve files from the Web using http
 and ftp, the two most widely used Internet protocols. It works
 non-interactively, so it will work in the background, after having
 logged off. The program supports recursive retrieval of web-authoring
 pages as well as ftp sites -- you can use wget to make mirrors of
 archives and home pages or to travel the Web like a WWW robot.
 This package is built with SSL support.
http://www.gnu.org/software/wget/index.html
Maxim Storchak <m.storchak@gmail.com>
@@

Package: wget-nossl
Submenu: File Transfer
Version: 1.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpcre +zlib
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: Non-interactive network downloader (without SSL support)
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: wget-1.16.tar.xz
Type: ipkg
Description:  Wget is a network utility to retrieve files from the Web using http
 and ftp, the two most widely used Internet protocols. It works
 non-interactively, so it will work in the background, after having
 logged off. The program supports recursive retrieval of web-authoring
 pages as well as ftp sites -- you can use wget to make mirrors of
 archives and home pages or to travel the Web like a WWW robot.
 This package is built without SSL support.
http://www.gnu.org/software/wget/index.html
Maxim Storchak <m.storchak@gmail.com>
@@


Source-Makefile: feeds/packages/net/znc/Makefile
Package: znc
Menu: 1
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +libpthread +USE_UCLIBCXX:uclibcxx +USE_LIBSTDCXX:libstdcpp
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description: 	ZNC is an IRC bouncer with many advanced features like detaching,
	multiple users, per channel playback buffer, SSL, IPv6, transparent DCC
	bouncing, and c++ module support to name a few.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-adminlog
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (adminlog plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Log user connects and disconnects and failed logins to file or syslog.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-autoattach
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (autoattach plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Reattaches you to channels on activity.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-autocycle
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (autocycle plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Cycles a channel when you are the only one in there and you don't have op.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-autoop
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (autoop plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Auto op the good guys.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-autoreply
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (autoreply plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Gives a automatic reply if someone messages you if you are away.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-autovoice
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (autovoice plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Autovoices everyone who joins some channel.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-awaynick
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (awaynick plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Change your nick while you are away.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-awaystore
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (awaystore plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Stores messages while away, also auto away.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-block-motd
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (block-motd plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    This module blocks the server's Message of the Day.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-blockuser
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (blockuser plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Blocks certain users from using ZNC saying their account was disabled.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-bouncedcc
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (bouncedcc plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Bounces dcc transfers through the znc server instead of sending them directly to the user.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-buffextras
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (buffextras plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Add nick changes, joins, parts, topic changes etc. to your playback buffer.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-cert
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (cert plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Use a SSL certificate for connecting to a server.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-certauth
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (certauth plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    This module allows users to log in to ZNC via SSL client keys.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-chansaver
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (chansaver plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Keeping config up to date when user joins and parts.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-clearbufferonmsg
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (clearbufferonmsg plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    This module keeps the buffer until the next message from the client.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-clientnotify
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (clientnotify plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Notify about new incoming connections to your user.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-controlpanel
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (controlpanel plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Allows you to add/remove/edit users and settings on the fly via IRC messages.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-crypt
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (crypt plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Encryption for channel/private messages.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-ctcpflood
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (ctcpflood plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    This module tries to block ctcp floods.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-dcc
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (dcc plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Allows you to transfer files to and from ZNC.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-disconkick
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (disconkick plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    This module will kick your client from all channels where you are, in case if ZNC disconnects from server.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-fail2ban
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (fail2ban plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Block IPs for some time after a failed login.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-flooddetach
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (flooddetach plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    This module detaches you from channels which are flooded.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-identfile
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (identfile plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Places the ident of a user to a file when they are trying to connect.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-keepnick
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (keepnick plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Tries to get you your primary nick.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-kickrejoin
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (kickrejoin plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Implements auto-rejoin-on-kick.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-lastseen
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (lastseen plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Logs when a user last logged in to ZNC.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-listsockets
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (listsockets plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    This module displays a list of all open sockets in ZNC.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-log
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (log plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Log conversations to file.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-modules_online
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (modules_online plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    This module fakes the online status of ZNC-*users.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-nickserv
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (nickserv plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Auths you with NickServ.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-notes
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (notes plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    This modules stores and displays short notes using a key/note pairs and shows them to you on connect.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-notify-connect
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (notify-connect plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Sends a notice to all admins when a user logs in or out.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-partyline
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (partyline plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Allows ZNC users to join internal channels and query other ZNC users on the same ZNC.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-perform
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (perform plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Performs commands on connect.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-q
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (q plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Auths you with Q (and a little more).
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-raw
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (raw plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    View all of the raw traffic.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-route-replies
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (route-replies plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Routes back answers to the right client when connected with multiple clients.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-sasl
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (sasl plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    The SASL module allows you to authenticate to an IRC network via SASL.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-savebuff
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (savebuff plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Saves your channel buffers into an encrypted file so they can survive restarts and reboots.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-schat
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (schat plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    SSL (encrypted) DCC chats.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-send-raw
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (send-raw plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Allows you to send raw traffic to IRC from other users.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-simple-away
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (simple-away plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    This module will automatically set you away on IRC while you are disconnected from the bouncer.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-shell
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (shell plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Have your unix shell in a query window right inside of your IRC client.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-stickychan
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (stickychan plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Keeps you sticked to specific channels.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-watch
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (watch plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Monitor activity for specific text patterns from specific users and have the text sent to a special query window.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-mod-webadmin
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (webadmin plugin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:    Allows you to add/remove/edit users and settings on the fly via a web browser.
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-webskin-dark-clouds
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc-mod-webadmin
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (dark-clouds webskin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:     dark-clouds webskin for webadmin
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-webskin-forest
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc-mod-webadmin
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (forest webskin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:     forest webskin for webadmin
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@

Package: znc-webskin-ice
Submenu: Instant Messaging
Version: 1.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread znc-mod-webadmin
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: ZNC (ice webskin)
Maintainer: Jonas Gorski <jogo@openwrt.org>
Source: znc-1.4.tar.gz
Type: ipkg
Description:     ice webskin for webadmin
http://en.znc.in/
Jonas Gorski <jogo@openwrt.org>
@@


Source-Makefile: feeds/packages/net/rsync/Makefile
Package: rsync
Menu: 1
Submenu: File Transfer
Version: 3.1.1-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpopt +zlib +RSYNC_xattr:libattr +RSYNC_acl:libacl
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Fast remote file copy program (like rcp)
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: rsync-3.1.1.tar.gz
Type: ipkg
Description:  rsync is a program that allows files to be copied to and from remote machines
 in much the same way as rcp. It has many more options than rcp, and uses the
 rsync remote-update protocol to greatly speed up file transfers when the
 destination file already exists.

 The rsync remote-update protocol allows rsync to transfer just the differences
 between two sets of files across the network link.
http://rsync.samba.org/
Maxim Storchak <m.storchak@gmail.com>
@@
Config:
	source "feeds/packages/net/rsync/Config.in"
@@

Package: rsyncd
Submenu: File Transfer
Version: 3.1.1-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +rsync
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Rsync daemon
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: rsync-3.1.1.tar.gz
Type: ipkg
Description:  rsyncd is a configuration file and initscript to utilize rsync as a daemon. It
 uses the same binary as rsync.
http://rsync.samba.org/
Maxim Storchak <m.storchak@gmail.com>
@@


Source-Makefile: feeds/packages/net/ctorrent-svn/Makefile
Package: ctorrent-svn
Submenu: BitTorrent
Version: r322-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +uclibcxx +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: net
Category: Network
Title: console-based BitTorrent client (with OpenSSL support)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: ctorrent-svn-r322.tar.gz
Type: ipkg
Description: 	CTorrent is a BitTorrent client written in the C programming language,
	known to be a very robust and mature programming language, which produces
	fast and optimized application.
 This package is built with OpenSSL support.
http://www.rahul.net/dholmes/ctorrent/
Peter Wagner <tripolar@gmx.at>
@@

Package: ctorrent-svn-nossl
Submenu: BitTorrent
Version: r322-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +uclibcxx
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: console-based BitTorrent client (with builtin SHA-1)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: ctorrent-svn-r322.tar.gz
Type: ipkg
Description: 	CTorrent is a BitTorrent client written in the C programming language,
	known to be a very robust and mature programming language, which produces
	fast and optimized application.
 This package is built with builtin (Steve Reid's public-domain) SHA-1 support
http://www.rahul.net/dholmes/ctorrent/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/net/net-snmp/Makefile
Package: libnetsnmp
Version: 5.4.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Open source SNMP implementation (libraries)
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: net-snmp-5.4.4.tar.gz
Type: ipkg
Description:  Simple Network Management Protocol (SNMP) is a widely used protocol for
 monitoring the health and welfare of network equipment (eg. routers),
 computer equipment and even devices like UPSs. Net-SNMP is a suite of
 applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both
 IPv4 and IPv6.
 .
 This package contains shared libraries, needed by other programs.
http://www.net-snmp.org/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: snmp-utils
Version: 5.4.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libnetsnmp
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Open source SNMP implementation (utilities)
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: net-snmp-5.4.4.tar.gz
Type: ipkg
Description:  Simple Network Management Protocol (SNMP) is a widely used protocol for
 monitoring the health and welfare of network equipment (eg. routers),
 computer equipment and even devices like UPSs. Net-SNMP is a suite of
 applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both
 IPv4 and IPv6.
 .
 This package contains SNMP client utilities.
http://www.net-snmp.org/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: snmpd
Version: 5.4.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libnetsnmp
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Open source SNMP implementation (daemon)
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: net-snmp-5.4.4.tar.gz
Type: ipkg
Description:  Simple Network Management Protocol (SNMP) is a widely used protocol for
 monitoring the health and welfare of network equipment (eg. routers),
 computer equipment and even devices like UPSs. Net-SNMP is a suite of
 applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both
 IPv4 and IPv6.
 .
 This package contains the SNMP agent, dynamically linked.
http://www.net-snmp.org/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: snmpd-static
Version: 5.4.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Open source SNMP implementation (daemon)
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: net-snmp-5.4.4.tar.gz
Type: ipkg
Description:  Simple Network Management Protocol (SNMP) is a widely used protocol for
 monitoring the health and welfare of network equipment (eg. routers),
 computer equipment and even devices like UPSs. Net-SNMP is a suite of
 applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both
 IPv4 and IPv6.
 .
 This package contains the SNMP agent, statically linked.
http://www.net-snmp.org/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/net/opentracker/Makefile
Package: opentracker
Submenu: BitTorrent
Version: 20130804-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib +libpthread
Menu-Depends: 
Provides: 
Build-Variant: ipv4
Build-Depends: libowfat
Section: net
Category: Network
Title: opentracker
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opentracker-20130804.tar.bz2
Type: ipkg
Description:   opentracker - An open and free bittorrent tracker

 opentracker is an open and free bittorrent tracker project.
 It aims for minimal resource usage and is intended to run at your wlan router.
 Currently it is deployed as an open and free tracker instance.
 Read our free and open tracker blog and announce your torrents there
 (but do not hesitate to setup your own free trackers!).

 This package contains the IPv4-build of opentracker.

http://erdgeist.org/arts/software/opentracker/
Daniel Golle <daniel@makrotopia.org>
@@

Package: opentracker6
Submenu: BitTorrent
Version: 20130804-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +zlib +libpthread
Menu-Depends: 
Provides: 
Build-Variant: ipv6
Build-Depends: libowfat
Section: net
Category: Network
Title: opentracker (IPv6 build)
Maintainer: Daniel Golle <daniel@makrotopia.org>
Source: opentracker-20130804.tar.bz2
Type: ipkg
Description:   opentracker - An open and free bittorrent tracker

 opentracker is an open and free bittorrent tracker project.
 It aims for minimal resource usage and is intended to run at your wlan router.
 Currently it is deployed as an open and free tracker instance.
 Read our free and open tracker blog and announce your torrents there
 (but do not hesitate to setup your own free trackers!).

 This package contains the IPv6-build of opentracker.

http://erdgeist.org/arts/software/opentracker/
Daniel Golle <daniel@makrotopia.org>
@@


Source-Makefile: feeds/packages/net/luci-app-ocserv/Makefile
Package: luci-app-ocserv
Submenu: 3. Applications
Version: 1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +luci-lib-json +luci-lib-nixio +luci-mod-admin-full +ocserv
Menu-Depends: 
Provides: 
Section: luci
Category: LuCI
Title: OpenConnect VPN server configuration and status module
Maintainer: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
Source: 
Type: ipkg
Description: 	ocserv web module for LuCi web interface
Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>
@@


Source-Makefile: feeds/packages/net/irssi/Makefile
Package: irssi
Submenu: Instant Messaging
Version: 0.8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +glib2 +libncurses +libpthread +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: ssl
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: net
Category: Network
Title: Console IRC client (with OpenSSL support)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: irssi-0.8.16.tar.bz2
Type: ipkg
Description: 	Irssi is a terminal based IRC client for UNIX systems.
 This package is built with OpenSSL support.
http://irssi.org/
Peter Wagner <tripolar@gmx.at>
@@

Package: irssi-nossl
Submenu: Instant Messaging
Version: 0.8.16-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +glib2 +libncurses +libpthread
Menu-Depends: 
Provides: 
Build-Variant: nossl
Build-Depends: !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: net
Category: Network
Title: Console IRC client (without OpenSSL support)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: irssi-0.8.16.tar.bz2
Type: ipkg
Description: 	Irssi is a terminal based IRC client for UNIX systems.
 This package is built without OpenSSL support.
http://irssi.org/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/net/miniupnpc/Makefile
Package: miniupnpc
Submenu: Firewall
Version: 1.9-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libminiupnpc
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Lightweight UPnP client
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: miniupnpc-1.9.tar.gz
Type: ipkg
Description: Lightweight UPnP client
http://miniupnp.tuxfamily.org/
Steven Barth <cyrus@openwrt.org>
@@

Package: libminiupnpc
Version: 1.9-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: libs
Category: Libraries
Title: Lightweight UPnP library
Maintainer: Steven Barth <cyrus@openwrt.org>
Source: miniupnpc-1.9.tar.gz
Type: ipkg
Description: Lightweight UPnP library
http://miniupnp.tuxfamily.org/
Steven Barth <cyrus@openwrt.org>
@@


Source-Makefile: feeds/packages/net/cshark/Makefile
Package: cshark
Version: 2014-07-02-ec638311b0b8ef74baf0be06dcf03a641e3308a2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libjson-c +libpcap +libuci +libubox +libuclient +libustream-polarssl
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: CloudShark capture tool
Maintainer: Luka Perkov <luka@openwrt.org>
Source: cshark-2014-07-02-ec638311b0b8ef74baf0be06dcf03a641e3308a2.tar.gz
Type: ipkg
Description: CloudShark capture tool
http://www.cloudshark.org/
Luka Perkov <luka@openwrt.org>
@@

Package: luci-app-cshark
Submenu: 3. Applications
Version: 2014-07-02-ec638311b0b8ef74baf0be06dcf03a641e3308a2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +cshark +luci
Menu-Depends: 
Provides: 
Section: luci
Category: LuCI
Title: Cloudshark capture tool Web UI
Maintainer: Luka Perkov <luka@openwrt.org>
Source: cshark-2014-07-02-ec638311b0b8ef74baf0be06dcf03a641e3308a2.tar.gz
Type: ipkg
Description: Cloudshark capture tool Web UI
Luka Perkov <luka@openwrt.org>
@@


Source-Makefile: feeds/packages/net/umurmur/Makefile
Package: umurmur-openssl
Submenu: Instant Messaging
Version: 0.2.15-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libconfig +libprotobuf-c +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: openssl
Section: net
Category: Network
Title: uMurmur (with OpenSSL support)
Maintainer: Martin Johansson <martin@fatbob.nu>
Source: umurmur-0.2.15.tar.gz
Type: ipkg
Description:     Minimalistic Mumble server daemon.
  Uses OpenSSL library for SSL and crypto.
http://code.google.com/p/umurmur
Martin Johansson <martin@fatbob.nu>
@@

Package: umurmur-polarssl
Submenu: Instant Messaging
Version: 0.2.15-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libconfig +libprotobuf-c +libpolarssl
Menu-Depends: 
Provides: 
Build-Variant: polarssl
Section: net
Category: Network
Title: uMurmur (with PolarSSL support)
Maintainer: Martin Johansson <martin@fatbob.nu>
Source: umurmur-0.2.15.tar.gz
Type: ipkg
Description:     Minimalistic Mumble server daemon.
  Uses the PolarSSL library for SSL and crypto.
http://code.google.com/p/umurmur
Martin Johansson <martin@fatbob.nu>
@@


Source-Makefile: feeds/packages/net/mwan3/Makefile
Package: mwan3
Submenu: Routing and Redirection
Version: 1.5-10
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +ip +iptables +iptables-mod-conntrack-extra +iptables-mod-ipopt
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Multiwan hotplug script with connection tracking support
Maintainer: Jeroen Louwes <jeroen.louwes@gmail.com>
Source: 
Type: ipkg
Description: Hotplug script which makes configuration of multiple WAN interfaces simple
and manageable. With loadbalancing/failover support for up to 250 wan
interfaces, connection tracking and an easy to manage traffic ruleset.
Jeroen Louwes <jeroen.louwes@gmail.com>
@@


Source-Makefile: feeds/packages/net/ntpd/Makefile
Package: ntpd
Submenu: Time Synchronization
Version: 4.2.6p5-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcap
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: ISC ntp server
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: ntp-4.2.6p5.tar.gz
Type: ipkg
Description:  The ISC ntp suite is a collection of tools used to synchronize the
 system clock with remote NTP time servers and run/montior local NTP
 servers.
 .
 This package contains the ntpd server.
http://www.ntp.org/
Peter Wagner <tripolar@gmx.at>
@@

Package: ntpd-ssl
Submenu: Time Synchronization
Version: 4.2.6p5-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcap +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: net
Category: Network
Title: ISC ntp server (with OpenSSL support)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: ntp-4.2.6p5.tar.gz
Type: ipkg
Description:  The ISC ntp suite is a collection of tools used to synchronize the
 system clock with remote NTP time servers and run/montior local NTP
 servers.
 .
 This package contains the ntpd server with OpenSSL support.
http://www.ntp.org/
Peter Wagner <tripolar@gmx.at>
@@

Package: ntpdate
Submenu: Time Synchronization
Version: 4.2.6p5-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcap
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: ISC ntp date
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: ntp-4.2.6p5.tar.gz
Type: ipkg
Description:  The ISC ntp suite is a collection of tools used to synchronize the
 system clock with remote NTP time servers and run/montior local NTP
 servers.
 .
 This package contains ntpdate.
http://www.ntp.org/
Peter Wagner <tripolar@gmx.at>
@@

Package: ntp-utils
Submenu: Time Synchronization
Version: 4.2.6p5-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcap
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: ISC ntp utilities
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: ntp-4.2.6p5.tar.gz
Type: ipkg
Description:  The ISC ntp suite is a collection of tools used to synchronize the
 system clock with remote NTP time servers and run/montior local NTP
 servers.
 .
 This package contains ntpdc, ntpq and ntptime.
http://www.ntp.org/
Peter Wagner <tripolar@gmx.at>
@@

Package: ntp-keygen
Submenu: Time Synchronization
Version: 4.2.6p5-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcap
Menu-Depends: 
Provides: 
Build-Variant: nossl
Section: net
Category: Network
Title: ISC ntp keygen
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: ntp-4.2.6p5.tar.gz
Type: ipkg
Description:  The ISC ntp suite is a collection of tools used to synchronize the
 system clock with remote NTP time servers and run/montior local NTP
 servers.
 .
 This package contains the ntp-keygen.
http://www.ntp.org/
Peter Wagner <tripolar@gmx.at>
@@

Package: ntp-keygen-ssl
Submenu: Time Synchronization
Version: 4.2.6p5-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcap +libopenssl
Menu-Depends: 
Provides: 
Build-Variant: ssl
Section: net
Category: Network
Title: ISC ntp keygen (with OpenSSL support)
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: ntp-4.2.6p5.tar.gz
Type: ipkg
Description:  The ISC ntp suite is a collection of tools used to synchronize the
 system clock with remote NTP time servers and run/montior local NTP
 servers.
 .
 This package contains the ntp-keygen with OpenSSL support.
http://www.ntp.org/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/net/sslh/Makefile
Package: sslh
Submenu: Routing and Redirection
Version: v1.16-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: SSL/SSH multiplexer
Maintainer: Jonathan McCrohan <jmccrohan@gmail.com>
Source: sslh-v1.16.tar.gz
Type: ipkg
Description: SSL/SSH multiplexer
http://rutschle.net/tech/sslh.shtml
Jonathan McCrohan <jmccrohan@gmail.com>
@@


Source-Makefile: feeds/packages/net/vnstat/Makefile
Package: vnstat
Version: 1.11-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread 
Menu-Depends: 
Provides: 
Build-Depends: libgd
Section: net
Category: Network
Title: Console-based network traffic monitor
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: vnstat-1.11.tar.gz
Type: ipkg
Description: 	vnStat is a network traffic monitor for Linux that keeps a log of daily
	network traffic for the selected interface(s). vnStat isn't a packet
	sniffer. The traffic information is analyzed from the /proc -filesystem,
	so vnStat can be used without root permissions.
http://humdi.net/vnstat/
Jo-Philipp Wich <jow@openwrt.org>
@@

Package: vnstati
Version: 1.11-4
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread vnstat +libgd
Menu-Depends: 
Provides: 
Build-Depends: libgd
Section: net
Category: Network
Title: PNG image output support for vnStat
Maintainer: Jo-Philipp Wich <jow@openwrt.org>
Source: vnstat-1.11.tar.gz
Type: ipkg
Description: 	The purpose of vnstati is to provide image output support for statistics
	collected using vnstat(1). However, the image file format is limited to
	png. All basic outputs of vnStat are supported excluding live traffic
	features. The image can be outputted either to a file or to standard
	output.
http://humdi.net/vnstat/
Jo-Philipp Wich <jow@openwrt.org>
@@


Source-Makefile: feeds/packages/net/krb5/Makefile
Package: krb5-libs
Version: 1.12.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libncurses
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Kerberos 5 Shared Libraries
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: krb5-1.12.1-signed.tar
Type: ipkg
Description: Kerberos 5 Shared Libraries
http://web.mit.edu/kerberos/
W. Michael Petullo <mike@flyn.org>
@@

Package: krb5-server
Version: 1.12.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +krb5-libs +libpthread
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Kerberos 5 Server
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: krb5-1.12.1-signed.tar
Type: ipkg
Description: Kerberos 5 Server
http://web.mit.edu/kerberos/
W. Michael Petullo <mike@flyn.org>
@@

Package: krb5-client
Version: 1.12.1-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +krb5-libs
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Kerberos 5 Client
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: krb5-1.12.1-signed.tar
Type: ipkg
Description: Kerberos 5 Client
http://web.mit.edu/kerberos/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/ipv6/aiccu/Makefile
Package: aiccu
Version: 20070115-11
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +ip +kmod-sit +kmod-tun
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: SixXS Automatic IPv6 Connectivity Client Utility
Maintainer: Ondrej Caletka <ondrej@caletka.cz>
Source: aiccu_20070115.tar.gz
Type: ipkg
Description: SixXS Automatic IPv6 Connectivity Client Utility
http://www.sixxs.net/tools/aiccu/
Ondrej Caletka <ondrej@caletka.cz>
@@


Source-Makefile: feeds/packages/ipv6/tayga/Makefile
Package: tayga
Version: 0.9.2-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +ip +kmod-ipv6 +kmod-tun
Menu-Depends: 
Provides: 
Section: net
Category: Network
Title: Out-of-kernel stateless NAT64 implementation for Linux
Maintainer: Ondrej Caletka <ondrej@caletka.cz>
Source: tayga-0.9.2.tar.bz2
Type: ipkg
Description:   TAYGA is an out-of-kernel stateless NAT64 implementation for
  Linux.  It uses the TUN driver to exchange packets with the
  kernel, which is the same driver used by OpenVPN and QEMU/KVM.
http://www.litech.org/tayga/
Ondrej Caletka <ondrej@caletka.cz>
@@


Source-Makefile: feeds/packages/multimedia/minidlna/Makefile
Package: minidlna
Version: 1.1.3-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +libexif +libjpeg +libsqlite3 +libffmpeg +libid3tag +libflac +libvorbis +libuuid +BUILD_NLS:libiconv-full +BUILD_NLS:libintl-full
Menu-Depends: 
Provides: 
Build-Depends: util-linux !BUILD_NLS:libiconv !BUILD_NLS:libintl
Section: multimedia
Category: Multimedia
Title: UPnP A/V & DLNA Media Server
Maintainer: Knyazkov Dmitry <medavedik@gmail.com>
Source: minidlna-1.1.3.tar.gz
Type: ipkg
Description:   MiniDLNA (aka ReadyDLNA) is server software with the aim of
  being fully compliant with DLNA/UPnP-AV clients.
http://minidlna.sourceforge.net/
Knyazkov Dmitry <medavedik@gmail.com>
@@


Source-Makefile: feeds/packages/multimedia/mjpg-streamer/Makefile
Package: mjpg-streamer
Menu: 1
Version: r182-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +libjpeg +PACKAGE_libv4l:libv4l
Menu-Depends: 
Provides: 
Section: multimedia
Category: Multimedia
Title: MJPG-streamer
Maintainer: Roger D <rogerdammit@gmail.com>
Source: mjpg-streamer-r182.tar.bz2
Type: ipkg
Description:  Streaming application for Linux-UVC compatible webcams
http://mjpg-streamer.wiki.sourceforge.net/
Roger D <rogerdammit@gmail.com>
@@
Config:
  source "feeds/packages/multimedia/mjpg-streamer/Config.in"
@@


Source-Makefile: feeds/packages/multimedia/crtmpserver/Makefile
Package: crtmpserver
Version: r811-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +libstdcpp +liblua
Menu-Depends: 
Provides: 
Section: multimedia
Category: Multimedia
Title: C++ RTMP Server
Maintainer: Thomas Heil <heil@terminal-consulting.de>
Source: crtmpserver-r811.tar.bz2
Type: ipkg
Description: C++ RTMP Server it is a high performance streaming server able to
stream (live or recorded) in the following technologies:
 * To and from Flash (RTMP,RTMPE, RTMPS, RTMPT, RTMPTE)
 * To and from embedded devices: iPhone, Android
 * From surveillance cameras
 * IP-TV using MPEG-TS and RTSP/RTCP/RTP protocols
                
Also, crtmpserver can be used as a high performance rendes-vous
server. For example, it enables you to do:
 * Audio/Video conferencing
 * Online gaming
 * Online collaboration
 * Simple/complex chat applications
http://www.rtmpd.com/
Thomas Heil <heil@terminal-consulting.de>
@@


Source-Makefile: feeds/packages/multimedia/ffmpeg/Makefile
Package: ffmpeg
Version: 0.11.5-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +libffmpeg-full
Menu-Depends: 
Provides: 
Build-Variant: full
Section: multimedia
Category: Multimedia
Title: FFmpeg program
Maintainer: Ted Hess <thess@kitschensync.net>
Source: ffmpeg-0.11.5.tar.bz2
Type: ipkg
Description:  FFmpeg is a a software package that can record, convert and stream digital
 audio and video in numerous formats.
 .
 This package contains the FFmpeg command line tool.
http://ffmpeg.mplayerhq.hu/
Ted Hess <thess@kitschensync.net>
@@

Package: ffprobe
Version: 0.11.5-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libffmpeg-full
Menu-Depends: 
Provides: 
Build-Variant: full
Section: multimedia
Category: Multimedia
Title: FFmpeg CLI media identifier
Maintainer: Ted Hess <thess@kitschensync.net>
Source: ffmpeg-0.11.5.tar.bz2
Type: ipkg
Description:  FFmpeg is a a software package that can record, convert and stream digital
 audio and video in numerous formats.
 .
 This package contains the FFprobe command line tool.
http://ffmpeg.mplayerhq.hu/
Ted Hess <thess@kitschensync.net>
@@

Package: ffserver
Version: 0.11.5-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +libffmpeg-full
Menu-Depends: 
Provides: 
Build-Variant: full
Section: multimedia
Category: Multimedia
Title:  streaming server
Maintainer: Ted Hess <thess@kitschensync.net>
Source: ffmpeg-0.11.5.tar.bz2
Type: ipkg
Description:  FFmpeg is a a software package that can record, convert and stream digital
 audio and video in numerous formats.
 .
 This package contains the FFmpeg streaming server.
Ted Hess <thess@kitschensync.net>
@@

Package: libffmpeg-custom
Menu: 1
Version: 0.11.5-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +zlib +libbz2 @DEVEL +libspeex
Menu-Depends: 
Provides: libffmpeg
Build-Variant: custom
Section: libs
Category: Libraries
Title: FFmpeg libraries (custom)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: ffmpeg-0.11.5.tar.bz2
Type: ipkg
Description:  FFmpeg is a a software package that can record, convert and stream digital
 audio and video in numerous formats.
 .
 This package contains customized FFmpeg shared libraries.
http://ffmpeg.mplayerhq.hu/
Ted Hess <thess@kitschensync.net>
@@
Config:
source "feeds/packages/multimedia/ffmpeg/Config.in"
@@

Package: libffmpeg-full
Version: 0.11.5-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +zlib +libbz2 @BUILD_PATENTED +alsa-lib
Menu-Depends: 
Provides: libffmpeg
Build-Variant: full
Section: libs
Category: Libraries
Title: FFmpeg libraries (full)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: ffmpeg-0.11.5.tar.bz2
Type: ipkg
Description:  FFmpeg is a a software package that can record, convert and stream digital
 audio and video in numerous formats.
 .
 This package contains full-featured FFmpeg shared libraries.
http://ffmpeg.mplayerhq.hu/
Ted Hess <thess@kitschensync.net>
@@

Package: libffmpeg-mini
Version: 0.11.5-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +zlib +libbz2 @BUILD_PATENTED
Menu-Depends: 
Provides: libffmpeg
Build-Variant: mini
Section: libs
Category: Libraries
Title: FFmpeg libraries (mini)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: ffmpeg-0.11.5.tar.bz2
Type: ipkg
Description:  FFmpeg is a a software package that can record, convert and stream digital
 audio and video in numerous formats.
 .
 This package contains minimal-featured FFmpeg shared libraries.
http://ffmpeg.mplayerhq.hu/
Ted Hess <thess@kitschensync.net>
@@

Package: libffmpeg-audio-dec
Version: 0.11.5-5
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +zlib +libbz2 @DEVEL +libspeex
Menu-Depends: 
Provides: libffmpeg
Build-Variant: audio-dec
Section: libs
Category: Libraries
Title: FFmpeg libraries (audio)
Maintainer: Ted Hess <thess@kitschensync.net>
Source: ffmpeg-0.11.5.tar.bz2
Type: ipkg
Description:  FFmpeg is a a software package that can record, convert and stream digital
 audio and video in numerous formats.
 .
 This package contains FFmpeg shared libraries for audio decoding
http://ffmpeg.mplayerhq.hu/
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/multimedia/shairport/Makefile
Package: shairport
Version: 2014-05-08-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libpthread +avahi-utils +libopenssl +libavahi-client +alsa-utils
Menu-Depends: 
Provides: 
Section: multimedia
Category: Multimedia
Title: ShairPort AirPort Express emulator
Maintainer: Ted Hess <thess@kitschensync.net>
Source: shairport-2014-05-08-078b21043cdcef6ffad7452db27f036770b23b0c.tar.gz
Type: ipkg
Description:   This program emulates an AirPort Express for the purpose of streaming
  music from iTunes and compatible iPods. It implements a server for the
  Apple RAOP protocol.
  ShairPort does not support AirPlay v2 (video and photo streaming).

  It supports multiple simultaneous streams, if your audio output chain
  (as detected by libao) does so.
Ted Hess <thess@kitschensync.net>
@@


Source-Makefile: feeds/packages/multimedia/icecast/Makefile
Package: icecast
Version: 2.4.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libcurl +libxml2 +libxslt +libogg +libopenssl
Menu-Depends: 
Provides: 
Section: multimedia
Category: Multimedia
Title: A streaming media server for Ogg/Vorbis and MP3 audio streams
Maintainer: André Gaul <gaul@web-yard.de>
Source: icecast-2.4.0.tar.gz
Type: ipkg
Description: 	Icecast is a streaming media server which currently supports Ogg
	Vorbis and MP3 audio streams. It can be used to create an Internet
	radio station or a privately running jukebox and many things in
	between. It is very versatile in that new formats can be added
	relatively easily and supports open standards for commuincation and
	interaction.
http://www.icecast.org/
André Gaul <gaul@web-yard.de>
@@


Source-Makefile: feeds/packages/multimedia/xupnpd/Makefile
Package: xupnpd
Version: 399-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +liblua
Menu-Depends: 
Provides: 
Section: multimedia
Category: Multimedia
Title: eXtensible UPnP agent
Maintainer: Álvaro Fernández Rojas <noltari@gmail.com>
Source: xupnpd-399.tar.gz
Type: ipkg
Description: xupnpd - eXtensible UPnP agent
This program is a light DLNA Media Server which provides ContentDirectory:1 service for sharing IPTV unicast streams over local area network (with udpxy for multicast to HTTP unicast conversion).
The program shares UTF8-encoded M3U playlists with links over local area network as content of the directory.
You can watch HDTV broadcasts (multicast or unicast) and listen Internet Radio in IP network without transcoding and PC.
http://xupnpd.org/
Álvaro Fernández Rojas <noltari@gmail.com>
@@


Source-Makefile: feeds/packages/multimedia/motion/Makefile
Package: motion
Version: 20110826-051001-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libjpeg +libpthread
Menu-Depends: 
Provides: 
Section: multimedia
Category: Multimedia
Title: webcam motion sensing and logging
Maintainer: Roger D <rogerdammit@gmail.com>
Source: motion-20110826-051001.tar.gz
Type: ipkg
Description: webcam motion sensing and logging
http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
Roger D <rogerdammit@gmail.com>
@@


Source-Makefile: feeds/packages/mail/dovecot/Makefile
Package: dovecot
Version: 2.2.13-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +libopenssl +librt +zlib +libbz2 +libcap
Menu-Depends: 
Provides: 
Build-Depends: libiconv
Section: mail
Category: Mail
Title: An IMAP and POP3 daemon
Maintainer: Peter Wagner <tripolar@gmx.at>
Source: dovecot-2.2.13.tar.gz
Type: ipkg
Description:  Dovecot is a program which provides POP3 and IMAP services.
http://www.dovecot.org/
Peter Wagner <tripolar@gmx.at>
@@


Source-Makefile: feeds/packages/lang/perl-dbi/Makefile
Package: perl-dbi
Submenu: Perl
Version: 1.631-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +perlbase-essential
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: Database independent interface for Perl
Maintainer: Marcel Denia <naoir@gmx.net>
Source: DBI-1.631.tar.gz
Type: ipkg
Description: Database independent interface for Perl
http://search.cpan.org/dist/DBI/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/luafilesystem/Makefile
Package: luafilesystem
Submenu: Lua
Version: 1.6.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +liblua
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: LuaFileSystem
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: luafilesystem-1.6.2.tar.gz
Type: ipkg
Description:  This package contains the LuaFileSystem library, a set of portable
 functions for directory creation, listing and deletion and for file
 locking.
http://keplerproject.github.com/luafilesystem/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/lang/perl-html-tagset/Makefile
Package: perl-html-tagset
Submenu: Perl
Version: 3.20-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: Data tables pertaining to HTML
Maintainer: Marcel Denia <naoir@gmx.net>
Source: HTML-Tagset-3.20.tar.gz
Type: ipkg
Description: Data tables pertaining to HTML
http://search.cpan.org/dist/HTML-Tagset/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/perl-www-mechanize/Makefile
Package: perl-www-mechanize
Submenu: Perl
Version: 1.73-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +perl-www
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: Perl WWW Mechanize
Maintainer: Marcel Denia <naoir@gmx.net>
Source: WWW-Mechanize-1.73.tar.gz
Type: ipkg
Description: Perl WWW Mechanize
http://search.cpan.org/dist/WWW-Mechanize/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/luabitop/Makefile
Package: luabitop
Submenu: Lua
Version: 1.0.2-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +lua
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: luabitop
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: LuaBitOp-1.0.2.tar.gz
Type: ipkg
Description: Lua BitOp is a C extension module for Lua 5.1/5.2 which adds bitwise operations on numbers.
http://bitop.luajit.org/
Maxim Storchak <m.storchak@gmail.com>
@@


Source-Makefile: feeds/packages/lang/luaposix/Makefile
Package: luaposix
Submenu: Lua
Version: v32-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +lua +librt +luabitop
Menu-Depends: 
Provides: 
Build-Depends: +lua/host
Section: lang
Category: Languages
Title: luaposix
Maintainer: Maxim Storchak <m.storchak@gmail.com>
Source: release-v32.tar.gz
Type: ipkg
Description:   luaposix is a general POSIX library for Lua providing access
  to various low level libc functions.
http://luaforge.net/projects/luaposix/
Maxim Storchak <m.storchak@gmail.com>
@@


Source-Makefile: feeds/packages/lang/perl-uri/Makefile
Package: perl-uri
Submenu: Perl
Version: 1.64-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: Manipulates and accesses URI strings
Maintainer: Marcel Denia <naoir@gmx.net>
Source: URI-1.64.tar.gz
Type: ipkg
Description: Manipulates and accesses URI strings
http://search.cpan.org/dist/URI/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/luasec/Makefile
Package: luasec
Submenu: Lua
Version: 0.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +lua +libopenssl +luasocket
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: LuaSec
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: luasec-0.4.tar.gz
Type: ipkg
Description:   LuaSec is a binding for OpenSSL library to provide TLS/SSL communication.
http://luasec.luaforge.net/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/lang/perl-www-curl/Makefile
Package: perl-www-curl
Submenu: Perl
Version: 4.17-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +libcurl
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: Perl bindings to libcurl
Maintainer: Marcel Denia <naoir@gmx.net>
Source: WWW-Curl-4.17.tar.gz
Type: ipkg
Description: Perl bindings to libcurl
http://search.cpan.org/dist/WWW-Curl/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/luai2c/Makefile
Package: luai2c
Submenu: Lua
Version: 1.0.0-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +liblua +kmod-i2c-core
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: Lua I2C binding
Maintainer: Frank Edelhaeuser <fedel@users.sourceforge.net>
Source: i2c-lua-1.0.0.tar.gz
Type: ipkg
Description: 	This is the Lua binding for I2C. It provides access to I2C slaves supported by the kernel.
http://sourceforge.net/projects/i2c-lua/
Frank Edelhaeuser <fedel@users.sourceforge.net>
@@


Source-Makefile: feeds/packages/lang/perl-test-harness/Makefile
Package: perl-test-harness
Submenu: Perl
Version: 3.32-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: Perl Test Harness
Maintainer: Marcel Denia <naoir@gmx.net>
Source: Test-Harness-3.32.tar.gz
Type: ipkg
Description: Perl Test Harness
http://search.cpan.org/dist/Test-Harness/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/perl-www/Makefile
Package: perl-www
Submenu: Perl
Version: 5.837-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +perl-html-parser +perl-html-tagset +perl-uri
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: WWW client/server library for Perl (aka LWP)
Maintainer: Marcel Denia <naoir@gmx.net>
Source: libwww-perl-5.837.tar.gz
Type: ipkg
Description: WWW client/server library for Perl (aka LWP)
http://search.cpan.org/dist/libwww-perl/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/perl-html-tree/Makefile
Package: perl-html-tree
Submenu: Perl
Version: 3.23-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +perl-html-parser +perl-html-tagset
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: represent and create HTML syntax trees
Maintainer: Marcel Denia <naoir@gmx.net>
Source: HTML-Tree-3.23.tar.gz
Type: ipkg
Description: represent and create HTML syntax trees
http://search.cpan.org/dist/HTML-Tree/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/luaexpat/Makefile
Package: luaexpat
Submenu: Lua
Version: 1.2.0-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +lua +libexpat
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: LuaExpat 
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: luaexpat-1.2.0.tar.gz
Type: ipkg
Description:   LuaExpat is a SAX XML parser based on the Expat library.
http://www.keplerproject.org/luaexpat/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/lang/perl-compress-bzip2/Makefile
Package: perl-compress-bzip2
Submenu: Perl
Version: 2.18-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +libbz2
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: Perl interface to bzip2 compression library
Maintainer: Marcel Denia <naoir@gmx.net>
Source: Compress-Bzip2-2.18.tar.gz
Type: ipkg
Description: Perl interface to bzip2 compression library
http://search.cpan.org/dist/Compress-Bzip2/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/perl-html-parser/Makefile
Package: perl-html-parser
Submenu: Perl
Version: 3.71-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +perl-html-tagset +perl-uri
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: A collection of modules that parse HTML text documents
Maintainer: Marcel Denia <naoir@gmx.net>
Source: HTML-Parser-3.71.tar.gz
Type: ipkg
Description: A collection of modules that parse HTML text documents
http://search.cpan.org/dist/HTML-Parser/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/luasocket/Makefile
Package: luasocket
Submenu: Lua
Version: 3.0-rc1-20130909-2
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +lua
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: LuaSocket
Maintainer: W. Michael Petullo <mike@flyn.org>
Source: luasocket-3.0-rc1-20130909.tar.bz2
Type: ipkg
Description:   LuaSocket is the most comprehensive networking support
  library for the Lua language. It provides easy access to
  TCP, UDP, DNS, SMTP, FTP, HTTP, MIME and much more.
http://luasocket.luaforge.net/
W. Michael Petullo <mike@flyn.org>
@@


Source-Makefile: feeds/packages/lang/perl-net-telnet/Makefile
Package: perl-net-telnet
Submenu: Perl
Version: 3.04-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: Telnet client
Maintainer: Marcel Denia <naoir@gmx.net>
Source: Net-Telnet-3.04.tar.gz
Type: ipkg
Description: Telnet client
http://search.cpan.org/dist/Net-Telnet/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/perl-lockfile-simple/Makefile
Package: perl-lockfile-simple
Submenu: Perl
Version: 0.208-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Section: lang
Category: Languages
Title: Simple advisory file locking
Maintainer: Marcel Denia <naoir@gmx.net>
Source: LockFile-Simple-0.208.tar.gz
Type: ipkg
Description: Simple advisory file locking
http://search.cpan.org/dist/LockFile-Simple/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/perl/Makefile
Package: perl
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +USE_EGLIBC:libbsd
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: The Perl intepreter
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description:   Perl is a stable, cross platform programming language.
  It is used for mission critical projects in the public and private sectors
  and is widely used to program web applications of all needs.
http://www.perl.com/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-anydbm-file
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: AnyDBM_File perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: AnyDBM_File perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-archive
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Archive perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Archive perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-attribute
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Attribute perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Attribute perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-attributes
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: attributes perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: attributes perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-autoloader
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: AutoLoader perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: AutoLoader perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-autosplit
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: AutoSplit perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: AutoSplit perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-autouse
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: autouse perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: autouse perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-b
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: B perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: B perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-base
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: base perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: base perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-benchmark
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Benchmark perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Benchmark perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-bigint
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: bigint perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: bigint perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-bignum
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: bignum perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: bignum perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-blib
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: blib perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: blib perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-bytes
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: bytes perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: bytes perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-cgi
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: CGI perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: CGI perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-charnames
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: charnames perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: charnames perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-class
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Class perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Class perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-compress
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Compress perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Compress perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-config
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Config perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Config perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-cpan
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: CPAN perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: CPAN perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-cwd
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Cwd perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Cwd perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-data
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Data perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Data perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-db
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +libdb47
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: DB perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: DB perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-db-file
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +libdb47
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: DB_File perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: DB_File perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-dbm-filter
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: DBM_Filter perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: DBM_Filter perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-devel
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Devel perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Devel perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-diagnostics
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: diagnostics perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: diagnostics perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-digest
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Digest perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Digest perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-dirhandle
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: DirHandle perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: DirHandle perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-dumpvalue
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Dumpvalue perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Dumpvalue perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-dumpvar
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: dumpvar perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: dumpvar perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-dynaloader
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: DynaLoader perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: DynaLoader perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-encode
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Encode perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Encode perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-encoding
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: encoding perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: encoding perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-english
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: English perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: English perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-env
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Env perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Env perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-errno
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Errno perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Errno perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-essential
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: essential perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: essential perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-extutils
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: ExtUtils perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: ExtUtils perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-fatal
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Fatal perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Fatal perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-fcntl
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Fcntl perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Fcntl perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-feature
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: feature perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: feature perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-fields
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: fields perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: fields perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-file
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: File perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: File perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-filecache
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: FileCache perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: FileCache perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-filehandle
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: FileHandle perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: FileHandle perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-filetest
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: filetest perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: filetest perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-filter
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Filter perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Filter perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-findbin
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: FindBin perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: FindBin perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-gdbm-file
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +libgdbm
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: GDBM_File perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: GDBM_File perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-getopt
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Getopt perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Getopt perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-hash
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Hash perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Hash perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-i18n
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: I18N perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: I18N perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-if
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: if perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: if perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-integer
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: integer perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: integer perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-io
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl +perlbase-symbol +perlbase-selectsaver +perlbase-essential +perlbase-xsloader +perlbase-fcntl +perlbase-tie +perlbase-file +perlbase-errno
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: IO perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: IO perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-ipc
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: IPC perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: IPC perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-less
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: less perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: less perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-list
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: List perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: List perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-locale
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Locale perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Locale perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-math
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Math perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Math perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-memoize
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Memoize perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Memoize perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-mime
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: MIME perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: MIME perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-module
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Module perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Module perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-mro
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: mro perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: mro perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-net
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Net perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Net perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-next
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: NEXT perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: NEXT perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-o
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: O perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: O perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-opcode
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Opcode perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Opcode perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-open
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: open perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: open perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-ops
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: ops perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: ops perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-package
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Package perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Package perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-params
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Params perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Params perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-perl5db
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: perl5db perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: perl5db perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-perlio
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: PerlIO perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: PerlIO perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-pod
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Pod perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Pod perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-posix
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: POSIX perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: POSIX perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-re
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: re perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: re perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-safe
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Safe perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Safe perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-scalar
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Scalar perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Scalar perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-sdbm-file
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: SDBM_File perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: SDBM_File perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-search
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Search perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Search perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-selectsaver
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: SelectSaver perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: SelectSaver perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-selfloader
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: SelfLoader perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: SelfLoader perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-sigtrap
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: sigtrap perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: sigtrap perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-socket
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Socket perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Socket perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-sort
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: sort perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: sort perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-storable
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Storable perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Storable perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-symbol
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Symbol perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Symbol perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-sys
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Sys perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Sys perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-term
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Term perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Term perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-test
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Test perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Test perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-text
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Text perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Text perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-thread
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Thread perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Thread perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-threads
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: threads perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: threads perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-tie
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Tie perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Tie perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-time
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Time perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Time perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-unicode
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: Unicode perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: Unicode perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-unicore
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: unicore perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: unicore perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-universal
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: UNIVERSAL perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: UNIVERSAL perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-user
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: User perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: User perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-utf8
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: utf8 perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: utf8 perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-version
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: version perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: version perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@

Package: perlbase-xsloader
Submenu: Perl
Prereq-Check: 1
Version: 5.20.0-6
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread perl
Menu-Depends: 
Provides: 
Build-Depends: perl/host
Build-Types: host
Section: lang
Category: Languages
Title: XSLoader perl module
Maintainer: Marcel Denia <naoir@gmx.net>
Source: perl-5.20.0.tar.gz
Type: ipkg
Description: XSLoader perl module
http://www.cpan.org/
Marcel Denia <naoir@gmx.net>
@@


Source-Makefile: feeds/packages/lang/lualanes/Makefile
Package: lualanes
Submenu: Lua
Version: 3.9.4-1
Depends: +libc +USE_EGLIBC:librt +USE_EGLIBC:libpthread +lua +luac +liblua +libpthread
Menu-Depends: 
Provides: 
Build-Depends: lua/host luac/host
Section: lang
Category: Languages
Title: LuaLanes
Maintainer: Vladimir Malyutin <first-leon@yandex.ru>
Source: lualanes-3.9.4-aa9bfcf2dd49f55f11b27e7c21d5b75d81ccfc7e.tar.gz
Type: ipkg
Description: 	Lanes is a lightweight, native, lazy evaluating multithreading library for Lua 5.1 and 5.2.
http://luaforge.net/projects/lanes/
Vladimir Malyutin <first-leon@yandex.ru>
@@


