Source-Makefile: package/kernel/hostap-driver/Makefile
Package: kmod-hostap
Submenu: Wireless Drivers
Version: <LINUX_VERSION>--2
Depends: @PCI_SUPPORT||PCMCIA_SUPPORT +kmod-lib80211 +wireless-tools +hostapd-common-old
Menu-Depends: 
Provides: 
Section: kernel
Category: Kernel modules
Title: Host AP support for Prism2/2.5/3
Maintainer: 
Source: hostap-driver-0.4.9.tar.gz
Type: ipkg
Kernel-Config: CONFIG_HOSTAP CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y
Description:  Host AP is a driver for 802.11b wireless cards based on Intersil 
 Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the 
 card to act as an IEEE 802.11 access point.
 This package contains the base Host AP driver code that is shared by 
 different hardware models. You will also need to enable support for 
 PLX/PCI/CS version of the driver to actually use the driver.
http://hostap.epitest.fi/

@@

Package: kmod-hostap-cs
Submenu: Wireless Drivers
Version: <LINUX_VERSION>--2
Depends: @PCMCIA_SUPPORT +kmod-hostap +kmod-pcmcia-core
Menu-Depends: 
Provides: 
Section: kernel
Category: Kernel modules
Title: Host AP driver for PCMCIA adaptors
Maintainer: 
Source: hostap-driver-0.4.9.tar.gz
Type: ipkg
Kernel-Config: CONFIG_HOSTAP_CS
Description:  Host AP is a driver for 802.11b wireless cards based on Intersil 
 Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the 
 card to act as an IEEE 802.11 access point.
 This package contains the Host AP driver for Prism2/2.5/3 PC cards.
http://hostap.epitest.fi/

@@

Package: kmod-hostap-pci
Submenu: Wireless Drivers
Version: <LINUX_VERSION>--2
Depends: @PCI_SUPPORT +kmod-hostap
Menu-Depends: 
Provides: 
Section: kernel
Category: Kernel modules
Title: Host AP driver for PCI adaptors
Maintainer: 
Source: hostap-driver-0.4.9.tar.gz
Type: ipkg
Kernel-Config: CONFIG_HOSTAP_PCI
Description:  Host AP is a driver for 802.11b wireless cards based on Intersil 
 Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the 
 card to act as an IEEE 802.11 access point.
 This package contains the Host AP driver for Prism2.5 PCI adaptors.
http://hostap.epitest.fi/

@@

Package: kmod-hostap-plx
Submenu: Wireless Drivers
Version: <LINUX_VERSION>--2
Depends: @PCI_SUPPORT +kmod-hostap
Menu-Depends: 
Provides: 
Section: kernel
Category: Kernel modules
Title: Host AP driver for PLX9052 based PCI adaptors
Maintainer: 
Source: hostap-driver-0.4.9.tar.gz
Type: ipkg
Kernel-Config: CONFIG_HOSTAP_PLX
Description:  Host AP is a driver for 802.11b wireless cards based on Intersil 
 Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the 
 card to act as an IEEE 802.11 access point.
 This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 
 based PCI adaptors.
http://hostap.epitest.fi/

@@


